JVC GD-W192, GD-W232 Instructions Manual

GD-W192
GD-W232

LCD DISPLAY MONITOR

INSTRUCTIONS

The illustration of the monitor above is GD-W192.

KM-LMU1823J Rev.00

P/NO. GEN0002

Please read this instruction thoroughly before use, and keep it handy for future reference.

1

European Union only

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and
electrical safety.
European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg Germany

Information for Users on Disposal of Old Equipment

[European Union]

This symbol indicates that the electrical and electronic equipment should not be disposed as
general household waste at its end-of-life.
Instead, the product should be handed over to the applicable collection point for the recycling
of electrical and electronic equipment for proper treatment, recovery and recycling in
accordance with your national legislation.

By disposing of this product correctly, you will help to conserve natural resources and will help
prevent potential negative effects on the environment and human health which could otherwise

Attention:

This symbol is

only valid in the
European Union

be caused by inappropriate waste handling of this product.
For more information about collection point and recycling of this product, please contact your
local municipal office, your household waste disposal service or the shop wher e you purchased
the product.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.

(Business users)

If you wish to dispose of this product, please visit our web page http://www.jvc.eu/ to obtain
information about the take-back of the product.

[Other Countries outside the European Union]

If you wish to dispose of this product, please do so in accordance with applicable national
legislation or other rules in your country for the treatment of old electrical and electronic
equipment.

Informacija za korisnike gde da odlazu staru opremu

[Vazece sa se zemlje koje su usvojile skupljanje razlicitod odpada systems]

Ovi simboli znace da svaki uredjaj sa ovim simbolom ne bi trebalo da ostaju
kao otpad u domacinstvu kada se istrosi.Umesto toga uredjaj treba da se preda
na vazecim mestima gde se skuplja odpad za reciklazu elektricne I elektronske
opreme za odgovarajuci tretman u skladu sa vasim zakonom
Odlaganje ovih proizvoda ispravno ,vi cete pomoci da se sprece negativne posledice
na zivotnu sredinu I ljudsko zdralje koje bi inace moglo biti prouzrokovano
neprikladnim rukovanjem ovim uredjajem
Za vise informacija omestima za skuoljanje uredjaju za reciklazu I reciklazu navedenih

Attention:

This symbol is

only valid in the
European Union

proizvoda kontaktirajte kontaktirajte lokalnu kancelariju,ili serviskoji skuplja vas odpad
da odkupi uredjaj od prodavnice
Ako koristite uredjaj kojiima u sebi baterije,akomulator, molim vas odlozite ih odvojeno
unapred prema lokalnim zahtevima

(Biznis korisnici)

Ako zelite da odlozite svoj uredjaj, molim vas kontaktirajte vaseg prodavca ili
isporucioca za dalje informacije

2

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

WARNING: This is a class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

WARNING: The monitor has to be connected to a grounded outlet

Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.

IMPORTANT SAFEGUARDS

► NEVER REMOVE THE BACK COVER

Removal of the back cover should be carried out only by qualified personnel.

► DO NOT USE IN HOSTILE ENVIRONMENTS

To prevent shock or fire hazard, do not expose the unit to rain or moisture.
This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases.

► KEEP IN A WELL VENTILATED PLACE

Ventilation holes are provided on the cabinet to prevent the temperature from rising.
Do not cover the unit or place anything on the top of unit.

► AVOID HEAT

Avoid placing the unit in direct sunshine or near a heating appliance.

► TO ELIMINATE EYE FATIGUE

Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly
on the monitor.

► BE CAREFUL OF HEAVY OBJECT

Neither the monitor itself nor any other heavy object should rest on the power cord.

Damage to a power cord can cause fire or electrical shock.

CAUTION

z Make enough room for inserting and removing the power plug! Place this product as close to the outlet as possible!
z When the product is left unattended and unused for a long period of time, unplug it from the wall outlet and

disconnect the cable system.

z Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in

a risk of fire or electric shock.

z Do not use any power cords or AC adapters other than those provided with this product!
z Use of power cords or AC adapters other than those provided may cause fire or malfunction.
z When several kinds of power cord are provided in the package, use the one which fits your AC outlet.
z Do not let the AC adapter hang down while using.
z Do not cover or wrap the AC adapter with clothes or sheets or the like.
z Leave space around the AC adapter to prevent overheating.

3

SAFETY PRECAUTIONS (cont.)

A

A

A

POWER CONNECTION

The power supply voltage rating of this product is AC 100 – 240 V (For European countries, Asian countries, and United Kingdom).
The power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure safety and
EMC regulations of each country.

• Not all types of power cords are supplied to this product.

For European and

sian countries:

This plug will fit only into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to install the proper
outlet. Do not defeat the safety purpose of the grounded plug.

• This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply of your
home, consult your product dealer or local electric power company.

Warning:
Note for United Kingdom power cord only

The plug of United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a
correctly rated approved type, re-fit the fuse cover. (Consult your dealer or qualified personnel.)

How to replace the fuse

Open the fuse compartment with the blade screwdriver, and replace the fuse.

C 100 – 240 V

For United Kingdom:

C 100 – 240 V

IMPORTANT SAFETY INSTRUCTIONS

1. Read all of these instructions.

2. Save these instructions for later use.

3. Follow all warnings and instructions marked on the product.

4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.

5. Do not use this product near water.

6. Do not place this product on an unstable cart, stand or table. The product may fall,
causing serious damage to the product and persons nearby.

7. Slots and openings in the cabinet and the back are provided for ventilation: to ensure reliable
operation of the product, these openings must not be blocked by placing the product on a bed,
sofa, rug or other similar surface. This product should never be placed near or over a heat
register. This product should not be placed in a built-in installation unless proper ventilation is
provided.

8. This product should be operated from the type of power source indicated on the marking label. If
you are not sure of the type of power available, consult your dealer or local power company.

9. This product is equipped with a 3-wire grounding type plug having a thir d (grounding) pin. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpo se of
the grounding-type plug.

10. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.

11. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the
extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into
the wall outlet does not exceed 10 amperes.

12. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short
out parts that could result in a risk of fire or electric shock. Never spill any kind of liquid on the product.

13. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points
or other risks. Refer all servicing to service personnel.

4

14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions.

A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the Product does not operate normally when the operating instructions are followed.

Adjust only those controls that are covered by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore normal

operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating a need for service.

15. The Main Plug is used as the disconnect device.
Make enough room for inserting and removing the power plug. Place the apparatus as close to the outlet as possib le.

16. Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monito r or
injury.

17. Do not step on or hang on the product.

European Union only

EMC Supplement

This equipment is in conformity with the provisions and protection requirements of the corresponding European Directi v es.
In order to keep the best performance and ensure electromagnetic compatibility, we recommend to use cable not exceeding the
following length:

Cable Length

Power cord (attached cable) 1.8m
Video signal cable (coaxial cable) 1.8m
Audio signal cable (shielded cable) 1.8m
RGB cable (shielded cable) with ferrite core 1.8m

CAUTION

In case where the strong electromagnetic waves or magnetism are near the audio cable or the signal cab le, the sound or the picture

will contain noise. In such cases, please keep the cable away from the sources of the disturbance.

TRADEMARK INFORMATION

●HDMI, the HDMI Logo, and High‐Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

LLC in the United States and other countries.

5

OPERATING PRECAUTIONS

The LCD panel and backlight have life expectancy. Due to the basic characteristics o f the LCD panel, an afterimage or
uneven display may occur. It is recommended that you change images occasionally, activate the power saving function,

or often turn off the power to reduce the load on the LCD panel. Continuous operations of the LCD panel may accelerate
the deterioration.

Maintenance

Screen
To avoid irreparable change in ap pearance of the screen
such as uneven color, discoloration, scratches, be careful

about the following

● Do not paste or stick anything using any glues or
adhesive tapes.

● Do not write anything on the screen.

● Do not strike the screen with a hard object.

● Avoid condensation on the screen.

● Do not wipe the screen with any liquid such as water. In
addition, wiping the screen with water-diluted neutral

:

detergent or solvent such as alcohol, thinner, or benzine
may affect the anti-reflection treatment of the screen.

● Do not wipe the screen forcefully.

Wipe stains off the screen with a soft cloth.

Ventilation openings

Use a vacuum cleaner to get rid of the dust around the
intakes (all the openings). If a vacuum cleaner is not available,
use a cloth and wipe it off. Leaving the dust around the intakes
may prevent proper temperature control and cause damage to
the product.

Cabinet

To avoid the deterioration or damages of the cabinet such
as its paint’s peeling away, be careful about the following:

● Do not wipe the cabinet using solvent such as alcohol,

thinner, or benzine.

● Do not expose the cabinet to any volatile substance such

as insecticides.

● Do not allow any rubber or plastic in contact for a long time.

● Do not wipe the cabinet forcefully.

Wipe stains off the cabinet with a soft cloth. If the cabinet
gets heavily stained, wipe it with a soft cloth soaked in
water-diluted neutral detergent and wrung well, then wipe
with a soft dry cloth.

CONTENTS

SAFETY PRECAUTIONS
OPERATING PRECAUTIONS
CONTENTS
UNPACKING
CONNECTING WITH EXTERNAL DEVICE
CONTROLS AND FUNCTIONS
SPECIFICATIONS
TROUBLESHOOTING
DIMENSIONS

3
6
6
7
8

9
14
15
16

6

UNPACKING

Remove the package cover and place the product on a flat and secure surface or in the installation location.
Check whether all the flowing device and accessories are included with the main system.

LCD Monitor

Power Cable

UK 1.8 mｘ１
Continental 1.8 m x 1

Instructions

7

CONNECTING WITH EXTERNAL DEVICE

9

8

10

DC12V

1

DC power supply input.
Connect the DC plug to the provided AC adapter.

AUDIO (PC)

2

Stereo Audio input for RGB PC or HDMI
When used for RGB PC, please set to HDMI
AUDIO setting to "DIGITAL".
When used for HDMI, please set to HDMI AUDIO
setting to "ANALOG" or “AUTO”
* HDMI AUDIO setting is in SETUP MENU

５００ｍ

AUDIO (VIDEO-2)

3

Stereo Audio input for VIDEO-2

５００ｍ

AUDIO (VIDEO-1 / S-VIDEO)

4

Stereo Audio input for VIDEO-1 or S-VIDEO

５００ｍ

S-VIDEO IN / OUT

5

S-VIDEO signal input / looping out
Y:1V(p-p
Y:1V(p-p

V(rms), high impedance

V(rms), high impedance

V(rms), high impedance

）
）

1 2 3 4 5 6 7

C:0.286V(p-p） NTSC
C:0.3V(p-p） PAL

VIDEO-2 IN / OUT

6

VIDEO-2 signal input / looping out
VBS:1V(p-p

）

VIDEO-1 IN / OUT

7

VIDEO-1 signal input / looping out
VBS:1V(p-p

）

HDMI

8

HDMI signal input
HDCP Compliant
Audio L-PCM 2ch. Support

RGB

9

RGB PC signal input
R,G,B: 0.7V(p-p) 75Ω
SYNC

：

TTL

AC IN

10

AC power supply input.
Connect the provided AC power cord.

8

CONTROLS AND FUNCTIONS

KEY BUTTON

OSD Key Function

MENU Activates and exit the OSD.

SOURCE/▼

AUTO/▲

◀ VOLUME

VOLUME ▶

POWER LED

When the menu is not displayed → Select input source.
When the menu is displayed → Move the OSD menu to down side.

When the menu is not displayed → Auto adjustment of RGB source.
（Adjust size and position of screen automatically.）

When the menu is displayed → Move the OSD menu to upper side.
When the menu is not displayed → Decrease the level of audio volume.

When the menu is displayed → Adjust the value.
When the menu is not displayed → Increase the level of audio volume.

When the menu is displayed → Select the OSD menu.

→ Adjust the value.

Turn the power ON or OFF. It will take about 10s before the picture appears.

Unlit: The monitor is completely off (the AC plug is not connected.)
Light in Green: The monitor is ON.
Light in Red: The monitor is off (on stand-by).
Light in Orange: The monitor is in the POWER SAVING in RGB input.

9

CONTROLS AND FUNCTIONS (cont.)

INPUT SOURCE SELECT

VOLUME CONTROL

1. Press the SOURCE button and then ▲/▼ button to move the source.

2. Press the ▶ button to select the source.

1. Sound volume can be adjust with ◀ / ▶buttons.

10

CONTROLS AND FUNCTIONS (cont.)

PICTURE

1. Press the MENU button to access menu.

2. Use the ▲/▼ button to highlight a selection.

3. Press the ▶ button to choose an item.

4. Use the ▲/▼ button to highlight a selection.

5. Use the ◀ / ▶button to adjust the setting on
a selected item.

■ CONTRAST : Adjust the picture contrast.

■ BRIGHTNESS : Adjust the picture brightness.

■ COLOR : Adjust the picture color density. (Can not use RGB input)

■ TINT : Adjust tint the picture color tint.(Can not use RGB input)

■ SHARPNESS : Adjust the sharpness of picture. (Can not use RGB input)

■ COLOR TEMP : Select the color temperature of picture. (MEDIUM / WARM / USER/ COOL)

* USER - RED, GREEN, BLUE is adjustable from range of 0 to 100%

SCREEN

■ SCAN MODE : Select the scan mode of the screen or Aspect ratio (FULL, REAL, UNDER, OVER and 4:3 aspect ratio).
FULL : It displays Full area.
REAL : REAL DOT

UNDER : It displays small.
OVER : It displays large.
4:3 : Aspect ratio is 4:3

*When the resolution of input signal is bigger than the panel pixell, don't disp lay.

1. Press the MENU button to access menu.

2. Press the ▶ button to choose an item.

3. Use the ◀ / ▶button to adjust the setting on
a selected item.

11

CONTROLS AND FUNCTIONS (cont.)

SETUP

1. Press the MENU button to access menu.

2. Use the ▲/▼ button to highlight a selection.

3. Press the ▶ button to choose an item.

4. Use the ▲/▼ button to highlight a selection.

5. Use the ◀ / ▶button to adjust the setting on
a selected item.

■ INPUT : Select an input source for main screen (VIDEO1, VIDEO2, S-VIDEO, RGB PC, HDMI)

■ LANGUAGE : Set to different language mode (ENGLISH, ITALIAN, FRENCH, SPANISH, GERMAN)

■ SOUND MUTE : Turn on/off the sound

* While “SOUND MUTE” is "ON", displays each changing the input source

* After turn off(stand-by mode), “SOUND MUTE” turns to “OFF”.

■ KEY LOCK : Locking the button on the front panel. (Prevent operation)
* Press ▲ &
* After turn off(no AC power supply ), turning “KEY LOCK” to “OFF”.

■ NOISE REDUCTION : Set a noise reduction mode

■ OSD TIME : Set a time duration of OSD menu (5s – 30s : Default setting is 15s)

■ DEFAULT : Factory default setting.

■ NO SYNC ACTION : Set the monitor to turn into Stand-by mode when no sync status continues for about 15 minutes

* NO SYNC ACTION item is for the VIDEO1 / VIDEO2 / S-VIDEO / HDMI input only
*Use "POWER SAVING" mode in RGB PC input
*When turn on, displays “No sync action worked” in a few seconds by this setting.

■ NO OPERATION : Set the monitor to turn into Stand-by mode when no operation status continues for about 4 hours.

*In case of continue to use over 4 hour, change to “OFF”. (Default setting is “ON”.)

*When turn on, a few seconds displays “No operation action worked” in this setting.

■ HDMI AUDIO : Set the output of HDMI AUDIO

DIGITAL – Output the digital audio signal on HDMI.

ANALOG – Output the input signal of AUDIO(PC) jack.
AUTO – Automatically detects the HDMI digital audio. When no detect, output the input signal of AUDIO(PC) jack.

* When AUDIO(PC) jack

◀ buttons simultaneousl y for 5 seconds and turning “KEY LOCK” to “OFF”.

use in RGB PC, set to "DIGITAL".

12

CONTROLS AND FUNCTIONS (cont.)

RGB SETUP

■ H-POSITION : Adjust the horizontal picture position.

■ V-POSITION : Adjust the vertical picture position.

■ CLOCK : Eliminates stripes or flickering by adjusting.

■ PHASE : Eliminates stripes or flickering by adjusting.

■ AUTO ADJUST : Adjust the size and position of picture automatically.

■ POWER SAVING : When no signal in RGB PC input, change to power saving mode at 5s. (POWER LED light to an orange.)

When signal comes in, turn on. (POWER LED light to a green.)

■ AUTO REPEAT : Operate "AUT O ADJUST" automatically, when the input signal source changes.

1. Press the MENU button to access menu.

2. Use the ▲/▼ button to highlight a selection.

3. Press the ▶ button to choose an item.

4. Use the ▲/▼ button to highlight a selection.

5. Use the ◀ / ▶button to adjust the setting on
a selected item.

✓：Acceptable －：Not acceptable
* Some signals may not be displayed normally even if its freque ncy is within the acceptable range.

* "NO SIGNAL" is displayed when no signal or not acceptable sinal come in.

Available signals

Signal type

NTSC（3.58） 15.734 59.94

PAL 15.625 50.0

VGA 31.469 59.94 －

VGA TEXT 31.469 70.00 －

SVGA

XGA

SXGA 63.981 60.020 －

WXGA 47.712 60.015 －
640×480p － － － －
720×480p － － － －
720×576p － － － －

1280×720p － － － －

1920×1080i － － － －

1920×1080p － － － －

Horizontal(kHz) Vertical(Hz) VIDEO 1/2 /S-VIDEO RGB HDMI

35.156 56.251 －

37.879 60.317 －

48.363 60.004 －

60.019 75.024 －

Frequency Input terminals

✓
✓

－ －
－ －

✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓

13

✓
✓
✓
✓
✓
✓

SPECIFICATIONS

GD-W192 GD-W232

Display

Dimension

Screen Size

LCD Panel

Effective screen size

Resolution

Pixel Pitch

Contrast Ratio

Aspect Ratio

Viewing Angle (H/V)

Display Color

Response Time

Video System

Outline Dimension (w/Stand)

Net Weight

Energy Efficiency Class

18.5 “ 23.0 “

active matrix TFT

non-glare

LED back light

Width : 409.8 mm

Height : 230.4 mm

Diagonal: 470.1 mm

1366 x 768 pixels 1920 x 1080 pixels

0.300 x 0.300 mm 0.265 x 0.265 mm
1000:1 1000:1

16:9 16:9

170°/160° 170°/160°

1,670 (10 000) 1,670 (10 000)

5 ms 5 ms

NTSC/PAL NTSC/PAL

448 x 182 x 367 mm 552 x 165 x 419 mm

5.0 kg 6.8 kg
B C

active matrix TFT

non-glare

LED back light

Width : 509.1 mm

Height : 286.4 mm

Diagonal : 584.2 mm

On-mode Power Consumption

Annual Energy Consumption,

Power

Circumstance

Mounts VESA Mounts Size

based on the power consumption of the

television operating 4 hours per day for 365

days. The actual energy consumption will

depend on how the television is used.

Stand-by mode Power Consumption

Electrical Ratings

Operating Temperature

Operating humidity

* Technical specifications are subject to change without notice.

20.7 W 33.3 W

30

kWh/year 49 kWh/year

0.33 W 0.33 W

AC 100~240 V (50Hz/60Hz)

1.2A

0℃~40℃ 0℃~40℃

20%~80%(non-condensing) 20%~80%(non-condensing)

100 × 100 mm

(M4, 8 mm)

AC 100~240 V (50Hz/60Hz)

1.2A

100 × 100 mm

(M4, 8 mm)

14

TROUBLESHOOTING

Troubleshooting Troubleshooting Tip

1. Make sure if the power supply is connected property.

The screen doesn’t show up

The screen is too light or to dark Control the BRIGHTNESS

The screen size is not fit for the PC signal

The screen color shows strange in the PC signal

No sound

Buttons on the monitor do not work.

2. Turn on the power.

3. Select the correct input signal with SOURCE button. .

Press the AUTO key among keys in the front.
(It is used only in the PC signal)

In the FUNCTION menu of OSD menu,
Perform the AUTO-ADJUST.

* Set "SOUND MUTE" in SETUP menu to "OFF".
*.In case of RGB PC input, set"HDMI AUDIO"in SETUP menu

to "DIGITAL".

Press ▲ & ◀ buttons simultaneously for 5s

15

DIMENSIONS Unit: mm [inch]

D

-

D

-

G

W192

G

ⓒ 2012 JVC KENWOOD Corporation

W232

z For easy understanding, pictures and illustrations are shown by being emphasized, omitt

ed or composed, and may be slightly different from actual products.

z Design and specifications are subject to change without notice.
z All company names and product names mentioned herein are used for identification pur

poses only, and may be the trademarks or registered trademarks of their respective com
panies.

16