How it Works
JVC
Loading...
Everio GS-TD1BEK
Basic User's Manual
32 pgs1.86 Mb0
Basic User's Manual
32 pgs1.95 Mb0
Detailed User Manual
150 pgs30.76 Mb0

JVC Everio GS-TD1BEK Detailed User Manual

CAMCORDER
LYT2327-005B
Detailed User Guide
GS-TD1BEK
Table of Contents
Beginner's Guide ............................................................ 4
Getting Started
Types of Usable SD Card ................................................... 17
Names of Buttons and Functions on the LCD Monitor ....... 18
Resetting the Clock ............................................................ 20
Charging the Battery Pack Overseas ................................. 24
Setting the Clock to Local Time when Traveling ................. 25
Setting Daylight Saving Time ............................................. 25
Recording
Zooming ............................................................................. 32
Zooming ............................................................................. 35
Scene Selection ................................................................. 37
Adjusting Focus Manually .................................................. 38
Using Focus Assist ............................................................. 39
Adjusting Brightness .......................................................... 39
Setting Shutter Speed ........................................................ 40
Setting Aperture ................................................................. 40
Setting White Balance ........................................................ 41
Setting Backlight Compensation ........................................ 42
Taking Close-up Shots ....................................................... 42
Setting the USER Button .................................................... 43
Using the Control Dial for Recording .................................. 44
Capturing Smiles Automatically (SMILE SHOT) ................. 46
Playback
Playing a Video with Defective Management Information ... 55
Date Search ....................................................................... 59
Playing Back 3D Images .................................................... 59
Playing Back 2D Images .................................................... 61
Digest Playback on a Blu-ray or DVD Player ...................... 66
Editing
Deleting the Currently Displayed File ................................. 67
Deleting Selected Files ...................................................... 67
Protecting/Releasing Protection of the Currently Displayed
File .................................................................................. 68
Protecting/Releasing Protection of Selected Files .............. 68
Copying
Preparing a DVD Writer (CU-VD50) ................................... 75
Preparing a DVD Writer (CU-VD3) ..................................... 75
Creating a Disc ................................................................... 75
Playing Back with a DVD Writer ......................................... 79
Finalizing Discs After Copying ............................................ 80
Preparing an External Blu-ray Drive ................................... 81
Creating a Disc ................................................................... 81
Playing Back with an External Blu-ray Drive ....................... 84
Preparing a USB External Hard Disk Drive ......................... 87
Copying All Files ................................................................ 87
Playing Back Files in the USB External Hard Disk Drive .... 88
Deleting Folders in the USB External Hard Disk Drive ....... 89
Formatting the USB External Hard Disk Drive .................... 90
Importing Files from the USB External Hard Disk Drive ...... 90
Verifying System Requirements (Guideline) ....................... 95
Installing the Provided Software ......................................... 95
Backing Up All Files ........................................................... 96
Organizing Files ................................................................. 97
Recording Videos to Discs ................................................. 98
Backing Up Files Without Using Provided Software ........... 99
List of Files and Folders ................................................... 100
JVC Software Licence Agreement ................................... 101
Menu Settings
Operating the Main Menu ................................................. 102
Operating the Common Menu .......................................... 102
SCENE SELECT .............................................................. 105
FOCUS ............................................................................ 105
FOCUS ASSIST ............................................................... 105
FOCUS ASSIST COLOR ................................................. 105
BRIGHTNESS ADJUST ................................................... 105
SHUTTER SPEED ........................................................... 105
APERTURE PRIORITY .................................................... 105
WHITE BALANCE ............................................................ 105
BACKLIGHT COMP. ........................................................ 105
TELE MACRO (2D mode only) ........................................ 105
TOUCH PRIORITY AE/AF ............................................... 105
2
DIS ................................................................................... 105
GAIN UP .......................................................................... 106
WIND CUT ....................................................................... 106
GRID ................................................................................ 107
TIME-LAPSE RECORDING ............................................. 107
3D VIDEO REC FORMAT (3D mode only) ....................... 107
VIDEO QUALITY .............................................................. 108
ZOOM (2D mode only) ..................................................... 109
x.v.Color (2D mode only) ................................................. 110
USER BUTTON SETTING ............................................... 110
3D SOUND ...................................................................... 110
MIC LEVEL ...................................................................... 111
MIC LEVEL SETTING ...................................................... 111
HEADPHONE VOL. ADJ. ................................................ 112
SCENE SELECT .............................................................. 115
FOCUS ............................................................................ 115
FOCUS ASSIST ............................................................... 115
FOCUS ASSIST COLOR ................................................. 115
BRIGHTNESS ADJUST ................................................... 115
SHUTTER SPEED ........................................................... 115
APERTURE PRIORITY .................................................... 115
WHITE BALANCE ............................................................ 115
BACKLIGHT COMP. ........................................................ 115
TELE MACRO (2D mode only) ........................................ 115
TOUCH PRIORITY AE/AF ............................................... 115
SMILE SHOT ................................................................... 115
SMILE LEVEL .................................................................. 115
SELF-TIMER .................................................................... 115
GAIN UP .......................................................................... 116
GRID ................................................................................ 116
SHUTTER MODE ............................................................ 117
CONT. SHOOTING SPEED ............................................. 117
IMAGE SIZE ..................................................................... 118
USER BUTTON SETTING ............................................... 118
SEARCH DATE ................................................................ 120
PROTECT/CANCEL ........................................................ 120
COPY ............................................................................... 120
MOVE .............................................................................. 120
TRIMMING ....................................................................... 120
UPLOAD SETTINGS ....................................................... 120
PLAYBACK OTHER FILE ................................................ 120
3D MOTION RELIEF (3D mode only) .............................. 120
SEARCH DATE ................................................................ 121
PROTECT/CANCEL ........................................................ 121
COPY ............................................................................... 121
MOVE .............................................................................. 121
CLOCK ADJUST .............................................................. 124
DATE DISPLAY STYLE ................................................... 124
LANGUAGE ..................................................................... 125
MONITOR BRIGHTNESS ................................................ 125
REC MEDIA FOR VIDEO ................................................. 125
REC MEDIA FOR IMAGE ................................................ 126
OPERATION SOUND ...................................................... 126
AUTO POWER OFF ......................................................... 127
QUICK RESTART ............................................................ 127
REMOTE .......................................................................... 128
DEMO MODE .................................................................. 128
TOUCH SCREEN ADJUST ............................................. 129
3D DISPLAY WARNING (3D mode only) ......................... 130
VIDEO OUTPUT (2D mode only) ..................................... 130
HDMI OUTPUT ................................................................ 131
HDMI CONTROL ............................................................. 132
AUTO FINALIZE .............................................................. 133
FACTORY PRESET ......................................................... 133
UPDATE .......................................................................... 133
FORMAT BUILT-IN MEM. ................................................ 134
FORMAT SD CARD ......................................................... 134
ERASE ALL DATA ........................................................... 135
Names of Parts
Indications on the LCD monitor
Troubleshooting
Maintenance ............................................................... 146
Specifications ............................................................. 147
3
Charging
0
Refer to the operating instructions found in the animation on the Detailed User Guide.
Recording
0
Refer to the operating instructions found in the animation on the Detailed User Guide.
Playback
0
Refer to the operating instructions found in the animation on the Detailed User Guide.
Shooting Tips
Basic Way to Hold a Camcorder ~ Recording Stable Images ~
.
This is the standard way of shooting while standing up. Be sure to master this basic technique in order to achieve stable images.
o
[Getting Ready]
A Open your feet to the width of your shoulders. B Keep the elbow of your right arm, which is holding the camcorder, close
to your side.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
Extending Your Hands to Shoot ~ High-Angle Shooting ~
.
Extend your hand when your subject is being hidden behind a crowd of people.
o
[Getting Ready]
A Open your feet to the width of your shoulders. B Extend your right hand and hold the camcorder over your head. C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
Caution :
0
Use this way of shooting only as a last resort as it is difficult to achieve stable images.
0
Set to the wide angle as much as possible as the image will be prone to camera shake.
0
Be considerate. Do not inconvenience the people around you.
Squatting and Shooting at Eye Level
.
Staying low is a common position to take when shooting small children. By recording from the eye level of the child, you can capture all his cute expressions clearly.
o
[Getting Ready]
A Kneel down with your left knee while keeping your right foot on the
ground.
B Place the elbow of your right arm, which is holding the camcorder, on
your right knee.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
Caution :
0
To record 3D images, refer also to “Precautions on Recording and Playing Back 3D Images”.
“Precautions on Recording and Playing Back 3D Images” (A p. 11)
Beginner's Guide
4
Holiday Season/Christmas
Record the happy Christmas celebration with your family!
.
Photo by 101st CAB, Wings of Destiny
Creative Commons Attribution-No Derivative Works 3.0
Decorating the Tree and Preparing the Dinner
The decoration of tree and preparation of dinner are part of the joy of Christmas. Be sure to record these happy family times!
o
Decorating the tree
.
A tree is the most important thing to bring out the mood of Christmas. Simply the scene of all family members engaging in the decorating of a fir tree with various colorful ornaments is full of the feeling of happiness.
o
Preparing the Dinner
.
Photo by Manicosity
Creative Commons Attribution-No Derivative Works 3.0
Record the scenes as everyone helps to prepare the feast of the night. You can film the mother who is cooking, the children who are helping, and of course, the process of making a cake!
Recording the Christmas Party
.
Photo by InnerSpirit
Creative Commons Attribution-No Derivative Works 3.0
After all preparations, it is finally the Christmas party itself. Not only should you record the candle-blowing scene, but also the smiles of the family while being surrounded by good food, or even the father who is slightly drunk from champagne!
Finding the Presents
.
For children, the greatest joy of Christmas is receiving presents the next morning. Their expression of delight when finding a present next to their pillow is a recording opportunity not to be missed. Get ready to shoot before the children wake up!
Useful Shooting Techniques
5
Wedding
Create an awesome wedding video for the bride and groom!
.
Discussing and Planning Before the Event
Before the day of the wedding reception, it is important to discuss with the bride and groom about various details such as the order of the ceremony and whether there are any entertainment programs or change of clothes. By understanding the preferences of the bride and groom, you will be able to shoot more appropriately.
Finding the Right Angle to Capture Both Bride and Groom
o
Composing the picture with the groom in front and the guests at the back
.
The main characters of a wedding are of course the bride and groom. Record their expressions clearly during the toast, speech, entertainment programs, and other scenes. Another recommendation is to capture the face shots of the guests, then pan towards the groom. Picture composition containing the crowd of guests only lacks fun, so be sure to pay attention to the shooting angle and size.
Recording the Expressions and Comments of Guests
o
Setting the shot from eye level to chest level
.
You can record comments from the guest by going around asking, "Please say a few words for the bride and groom". This can be done at the guests' waiting room, when the bride and groom are changing, or during the entertainment programs.
Closing Up on the Bride's Face During the Thank You Speech
The climax of the event finally comes during the bride and groom’s thank you speech and presentation of flowers. The touching words of appreciation from the bride and tears of joy from the parents are scenes that must not be missed. Start by closing up on the bride’s face using zoom. As the tears start to form in the bride’s eyes, continue shooting for a little longer. Then, slowly zoom out to the wide angle to show the parents who are moved by the speech.
Advanced Operation with Two Camcorders
If video-editing is to be done, record using two camcorders so that a video with varying scenes can be created. You can try asking a close friend who has a camcorder at home. Set the borrowed camcorder on a tripod to focus on taking close-up shots of the bride and groom. In this way, the other camcorder can be moved around to record other scenes, enabling an interesting video with changing scenes to be created through editing and compilation. As most people own at least a digital camera nowadays, even if you are really unable to find an extra camcorder, inserting still pictures to the video at various points is also a good way to add variety. Do give it a try!
o
<Camcorder 1> Closing up on the bride and groom all the time
o
<Camcorder 2> Recording the congratulatory messages from friends at the same time
.
Useful Shooting Techniques
6
Travel
Capture all the good times of your domestic or overseas trips!
.
Bringing the Necessary Equipment
The necessary things to bring on a trip depends on your traveling purpose
and the destination. For overseas trips in particular, you have to think about what to bring in accordance to the local conditions. Here are some suggestions for your consideration.
o
Camcorder
Think about how many hours of shooting you will usually perform in a day. Be sure to prepare enough recording medium especially for long overseas trips. If you are recording in SD cards, get ready the sufficient number of cards, including some for backup.
o
Battery Pack
Prepare a battery pack that is ready for double the expected recording time in a day. For example, if you plan to record for 2 hours a day, prepare a battery pack that is ready for 4 hours (actual recording time). For a day trip, you can prepare a battery with low capacity but for a long trip, do prepare a few batteries with high capacities.
o
AC Adapter
The JVC AC adapter supports voltages from 100 V to 240 V, and hence can
be used anywhere in the world.
Bring along the adapter if you are traveling for a long time. Charge the battery pack while sleeping so that you can record with full battery power the next day.
o
Power Plug Adapter
.
The shape of the power plug varies according to countries. Be sure to check
the shape of the power plug beforehand, and bring the appropriate power
plug adapter.
“Charging the Battery Pack Overseas” (A p. 24)
o
Battery Charger
.
Recording cannot be performed when an AC adapter is connected to the camcorder for battery charging. You can bring an additional battery charger to charge battery packs if you plan to use the camcorder for recording at night. You can also charge multiple battery packs by using both the battery charger and this camcorder at the same time.
o
Tripod
.
A tripod is an essential item to take stable images. Select an appropriate tripod in accordance to your purpose and style of traveling, such as a compact one to be used on a table or one that is at least 1 m tall.
Recording the Excitement Before Departure
It may be a little abrupt to start your travel video at the destination suddenly. Record also the preparations prior to departure if it is a family trip, or the time when everyone is gathered at the meeting place if you are traveling with your friends. For overseas trips, taking a shot of the signs and displays at the airport of the flight you are taking may be useful for future reference.
.
.
Useful Shooting Techniques
7
Using Pan at the Places of Interest
Tourists spots with beautiful scenery or historical sites are places that you would certainly want to record. To capture the magnificence of a scene which cannot be fitted into a single frame, try the panning technique. Refer to the "Shooting Tips" found in this website on how to use panning effectively. In addition, you may also like to take a shot of the signs or monuments that can often be found at the tourist spots.
.
.
Showing Everyone Having a Good Time
When taking a video, it is rather dull to shoot only the scenery or historical sites. Talk about your feelings while recording the breath-taking scenery of an attraction so that it will be an interesting scene to view later.
Useful Shooting Techniques
8
Amusement Park
Take more shots of the smiling faces of everyone in the family!
.
Taking Videos or Still Images According to the Attraction
You may choose to take videos all the time. However, you may want to take some still images too. The following section explains the scenarios suitable for taking videos or still
images.
o
Scenarios suitable for taking videos
.
Scenarios with changes in body movement are suitable for taking videos. This includes situations where there are rapid changes in facial expressions
or voices of surprise and delight.
*Some amusement parks do not allow passengers to perform any recording.
Be sure to check beforehand.
[Examples]
0
Merry-go-round, go kart, coffee cup, etc.
o
Scenarios suitable for taking still images (photos)
.
Scenarios with little movement of the subject are suitable for taking still images. Try to take the still images from an angle such that the surroundings can be seen clearly. [Examples]
0
Carousal, ferris wheel, fun bicycle rides, etc.
Inducing Responses by Calling Out
.
Videos with no waving of hands nor laughter are not only dull when you view them later, but also put the capability of the audio-recording function of the camcorder to a waste. When recording, induce more reactions by enthusiastically waving your hands or shouting out "Is it fun?" and the like.
Capturing the Best Moment in a Video as a Still Image
Shots with the eyes closed are often taken by accident. To reduce such mistakes, make use of the function to capture still images from videos. As videos are actually continuous recording of 60 still images within 1 minute, using this function allows you to select the best moment and save it as a still image. “Capturing a Still Image in the Video during Playback” (A p. 69)
.
Photo by just that good guy jim
Creative Commons Attribution-No Derivative Works 3.0
Video Playback in Progress
.
Photo by talk rhubarb
Creative Commons Attribution-No Derivative Works 3.0
Capturing a Still Image
.
Photo by just that good guy jim
Creative Commons Attribution-No Derivative Works 3.0
Video Playback in Progress
Useful Shooting Techniques
9
Advanced Operation with Backlight Compensation
When the subject’s face is in backlight or when the expression cannot be seen clearly, the Intelligent Auto function of this unit automatically increases its brightness for recording. If Intelligent Auto fails to function as expected or if the brightness correction is insufficient, you can increase the brightness by using backlight compensation in the Manual mode. “Setting Details” (A p. 42)
o
<Without backlight compensation>
.
o
<With backlight compensation>
.
Useful Shooting Techniques
10
Precautions on Recording and Playing Back 3D Images
3D images can be recorded and played back on this unit. You can enjoy realistic and powerful 3D images recorded on this unit by playing back on a 3D compatible TV. Before use, please read the following precautions to ensure safe and comfortable viewing of the 3D images.
Recording 3D Images
This unit makes use of the misalignment between the images that enter the left and right eyes to create the 3D effect during 3D recording. As the images that
enter the left and right eyes are different, fatigue may be experienced. In addition, depending on the content of the video, an illusion of movement may be
experienced and result in motion sickness. Take note of the following when recording 3D images.
o
Basic Way to Hold a Camcorder During 3D Recording (Recording Stable Images)
.
Open your legs slightly
Keep elbows close to your sides to avoid camera shake
Hold the LCD monitor while recording
o
Shooting Distance During 3D Recording (Achieving Comfortable 3D Images)
.
It is recommended to perform 3D recording
within the optimal zone.
Telephoto Optimal
Zone
Wide Angle Optimal
Zone
50 m
5 m
10 m
1 m
Memo :
0
Make sure that you have stable footing during recording.
0
Do not swing the camera horizontally or vertically during recording.
0
If the subject is not recorded within the recommended shooting distance, 3D effect may be weak.
0
When recording night scenes or landscapes, 3D effect of some subjects may be weak.
0
For subjects that appear at the side of the screen, 3D effect may be weak.
0
Operate slowly when using the zoom.
0
If the image is zoomed in too much, 3D effect may be weak.
0
It is recommended to make use of a tripod.
* If you do not take note of the above points during 3D recording, the recorded scenes may be played back in stop-motion during playback.
“3D MOTION RELIEF (3D mode only)” (A p. 120)
Getting Started
11
3D Display on the LCD Monitor
The LCD monitor supports 3D images during both recording and playback. Press the “3D/2D” button on the touch screen to change the display on the LCD monitor between 3D and 2D.
0
When using the 3D recording mode, the image will be recorded in 3D even if the display on the LCD monitor is set to 2D.
0
3D effect appears stronger when viewed at approximately 30 cm from the front.
0
3D effect may be weak if viewed from an angle other than the front.
0
The LCD monitor appears darker when 3D images are displayed. Change the display to 2D when it is difficult to see, such as when using this unit outdoors.
Caution :
0
Recording and viewing of the 3D images is not recommended for people with medical history of photosensitivity, heart diseases, feel sick, suffer from lack of sleep, suffer from fatigue, or are drunk.
Medical conditions may worsen.
0
Do not shoot a subject from a distance shorter than the minimum shooting distance.
The 3D effect may become stronger and result in fatigue or discomfort. The minimum shooting distance of this camera is 80 cm (using wide angle).
0
Be careful not to shake the camera during recording.
Excessive shaking while riding in a vehicle or during walking may result in fatigue or discomfort. To perform recording while moving the camera, keep the speed slow and steady. Keep the camera in a horizontal position, as much as possible, during recording.
0
If you have vision problems such as short-sightedness, long-sightedness, varying vision in the left and right eyes, or astigmatism, it is recommended to correct your vision by wearing glasses, etc. Stop recording or viewing of the 3D images if you see double images.
3D images may appear differently for different people. Correct your vision appropriately before viewing the 3D images.
0
Stop recording or viewing of the 3D images if you experience fatigue or discomfort.
Continual recording or viewing of the 3D images may result in health problems. Take an adequate rest. Recording or viewing of the 3D images in an environment where shaking of the monitor is expected, such as while riding in a vehicle or during walking, may result in fatigue or discomfort.
0
If you experience fatigue or discomfort while recording or viewing of the 3D images on the LCD monitor, set the display to 2D.
Continual recording and viewing of the 3D images may result in health problems.
0
Rest well after recording or viewing of the 3D images.
After recording or viewing of the 3D images, check that you do not experience fatigue or discomfort before driving, etc.
0
Take a break every 30 to 60 minutes when recording or viewing of the 3D images.
Long periods of recording or viewing may cause visual fatigue.
0
Keep a distance of at least 3 times the effective height of the screen when viewing of the 3D images on a 3D compatible TV.
Viewing of the 3D images from a distance shorter than the recommended distance may cause visual fatigue.
TV Size Recommended Distance
54” Approx. 2.0 m
50” Approx. 1.9 m
46” Approx. 1.7 m
42” Approx. 1.6 m
0
Recording and viewing of the 3D images is only recommended for ages 5 to 6 and above.
Guardians should pay close attention to children as health problems may result if fatigue and discomfort are not noticed immediately.
3D Effect Mechanism
.
Right EyeLeft Eye
Slit
Parallax Barrier
3D images on the LCD monitor of this unit are displayed using the parallax barrier system. Placed in front of an image source, a parallax barrier consists of a series of slits arranged alternately for the left and right eyes, allowing each eye to see a different image when viewing from a distance, thus creating the 3D effect. As such, 3D effect may appear weak depending on the angle of viewing.
Getting Started
12
Verifying the Accessories
If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center.
Illustration Description
.
AC Adapter AP-V20M
0
Connects to this unit to charge the battery pack. It can also be used when recording or playing back videos indoors.
.
Battery Pack BN-VF815U
0
Attaches to this unit to supply power.
.
INFO
SNAP
SHOT
START
/STOP
INDEX
Remote Control RM-V760U
0
Operates certain functions from a distance.
.
HDMI Mini Cable
0
Connects this unit to a TV to play back recorded images on the TV in a better quality.
.
AV Cable
0
Connects this unit to a TV to play back recorded images on the TV.
.
USB Cable (Type A - Mini Type B)
0
Connects this unit to a computer.
.
Basic User Guide
0
Read well and keep in a safe place where it can be accessed easily when necessary.
.
CD-ROM
0
For installing the provided software Everio MediaBrowser 3D on a computer.
Memo :
Getting Started
13
SD cards are sold separately. “Types of Usable SD Card” (A p. 17) When using the AC adapter overseas, please prepare a commercially available converter plug for the country or region of visit. “Charging the Battery Pack Overseas” (A p. 24)
Getting Started
14
Charging the Battery Pack
Charge the battery pack immediately after purchase and when the remaining battery power is low. The battery pack is not charged at the time of purchase.
1
Attach the battery pack.
.
0
Align the top of the battery with the mark on this unit, and slide in until the battery clicks into place.
2
Connect the AC adapter to the DC connector.
.
3
Plug in the power.
.
USER
AC Adapter To AC Outlet (110 V to 240 V)
0
The charging lamp blinks when charging is in progress. It goes out when charging is finished.
Caution :
Be sure to use JVC battery packs.
0
If you use any other battery packs besides JVC battery packs, safety and performance cannot be guaranteed.
0
Charging time: Approx. 2 h 40 m (using supplied battery pack) The charging time is when the unit is used at 25°C. If the battery pack is charged outside the room temperature range of 10°C to 35°C, charging may take a longer time or it may not start. The recordable and playable time may also be shortened under some usage conditions such as at low temperature.
Be sure to use the supplied JVC AC adapter.
0
If you use any other AC adapters besides the supplied JVC AC adapter, malfunctions may occur.
Rechargeable Batteries：
0
When using the battery in a low temperature environment (10°C or below), the operating time may be shortened, or it may not function properly. When using this unit outdoors in the winter weather, warm the battery, such as by placing it in the pocket, before attaching it. (Keep away from direct contact with a warm pack.)
0
Do not expose the battery to excessive heat, such as direct sunlight or fire.
0
After removing the battery, store it in a dry place between 15°C to 25°C.
0
Keep a 30 % battery level (X) if the battery pack is not to be used for a long period of time. In addition, fully charge and then fully discharge the battery pack every 2 months, then continue to store it at a 30 % battery level (X).
Memo :
0
You can connect this unit to the AC adapter to record for long hours indoors. (Battery charging begins when the LCD monitor is closed.)
Detaching the Battery Pack
.
Press the battery release lever to detach the battery from this unit.
Approximate Battery Charging Time (Using AC Adapter)
Battery Pack Charging Time
BN-VF815U (Supplied)
2 h 40 m
BN-VF823U 3 h 40 m
0
When the battery life is reached, the recording time becomes shorter even if the battery pack is fully charged. (Replace the battery pack with a new one.)
* The charging time is when the unit is used at 25°C. If the battery pack is charged outside the room temperature range of 10°C to 35°C, charging may take a longer time or it may not start. The recordable and playable time may also be shortened under some usage conditions such as at low temperature. “Approximate Recording Time (Using Battery)” (A p. 52)
Getting Started
15
Grip Adjustment
.
Pad
A Pull back the belt B Adjust the length C Attach the belt
Caution :
0
Be sure to fasten the grip belt properly. If the belt is loose, this unit may drop and result in injuries or damages.
Inserting an SD Card
When a commercially available SD card is inserted, recordings can be made to either the card or built-in memory separately. “Types of Usable SD Card” (A p. 17) “Approximate Video Recording Time” (A p. 51)
1
Open the LCD monitor.
.
2
Press and hold the M button for 2 seconds or more to turn off the power.
3
Open the cover.
.
4
Insert an SD card.
.
Label
0
Insert with the label facing upwards.
Warning
0
Make sure not to insert the card in the wrong direction. It may cause damage to the unit and card.
0
Turn off the power of this unit before inserting or removing a card.
0
Do not touch the metal contact area when inserting the card.
Memo :
0
To record to the card, it is necessary to perform media settings. When no card is available, set media settings to “BUILT-IN MEMORY” for recording.
“REC MEDIA FOR VIDEO” (A p. 125) “REC MEDIA FOR IMAGE” (A p. 126)
0
To use cards that have been used on other devices, it is necessary to format (initialize) the card using “FORMAT SD CARD” from media settings.
“FORMAT SD CARD” (A p. 134)
Getting Started
16
Removing the Card
Push the SD card inward once, then pull it out straight.
.
Types of Usable SD Card
The following SD cards can be used on this unit. Operations are confirmed on the SD cards from the following manufacturers.
0
Panasonic
0
TOSHIBA
0
SanDisk
SD Card
.
0
This unit supports 256 MB to 2 GB SD cards.
0
Use a Class 4 or higher compatible SD card (2 GB) for video recording.
SDHC Card
.
0
Use a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for video recording.
SDXC Card
.
0
Use a Class 4 or higher compatible SDXC card (Max. 64 GB) for video recording.
Memo :
0
Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss.
0
To record videos with “VIDEO QUALITY” set to “THR”, use of a Class 10 card is recommended. (Class 6 or higher SDHC/SDXC card is required.)
0
To record videos with “VIDEO QUALITY” set to “UXP”, use of a Class 6 compliant SDHC/SDXC card is recommended.
0
Class 4 and Class 6 are guaranteed to have a minimum transfer rate of 4 MB/s and 6 MB/s respectively during reading or writing of data.
0
You can also use a Class 10 compliant SDHC/SDXC card.
0
To protect the data, do not touch the terminals of the SD card.
0
Both videos and still images can be recorded on one SD card.
For customers who completed the firmware update：
0
To record in “AVCHD 3D” mode, use of a Class 10 is recommended. (Class 6 or higher SDHC/SDXC card is required.)
When your computer cannot recognize the SDXC card
Confirm and update the OS of your computer.
Windows XP / Windows XP SP1
Necessary to update to SP2 or higher.
Windows XP SP2 / Windows XP SP3
Necessary to download the update software. (KB955704)
http://www.microsoft.com/downloads/details.aspx? FamilyID=1cbe3906-ddd1-4ca2-b727­c2dff5e30f61&displaylang=en
Windows Vista
Necessary to update to SP1 or higher.
Windows Vista SP1 / Windows Vista SP2
Necessary to download the update software. (KB975823)
0
32 bit version
http://www.microsoft.com/downloads/en/ details.aspx?FamilyID=2d1abe01-0942-4f8a­abb2-2ad529de00a1
0
64 bit version
http://www.microsoft.com/downloads/en/ details.aspx?FamilyID=7d54c53f-017c-4ea5­ae08-34c3452ba315
Windows 7 Necessary to download the update software.
(KB976422)
0
32 bit version
http://www.microsoft.com/downloads/en/ details.aspx?FamilyID=3ee91fc2-a9bc-4ee1­aca3-2a9aff5915ea
0
64 bit version
http://www.microsoft.com/downloads/en/ details.aspx?FamilyID=73f766dd-7127-4445­b860-47084587155f
Getting Started
17
Using the Touch Screen
Icon operation buttons, thumbnails, and menu items are displayed on the touch screen according to the mode in use.
0
To operate, tap the icon operation buttons, thumbnails, or menu items on the touch screen lightly.
0
There are two ways to operate the touch screen, namely “tap” and “drag”. The following are some examples.
0
A Tap the displayed button (icon) or thumbnail (file) on the touch screen to make selection.
0
B Drag the thumbnails on the touch screen to search for the desired file.
.
00:01:23 00:12:34
2011
2011
Index ScreenPlayback ScreenRecording Screen
0
The touch screen of this unit is pressure-sensitive. When the touch screen does not respond smoothly, apply slightly more force to your fingertip.
0
Do not press or rub with excessive force.
0
If you apply a protect sheet or a sticker, the touch screen may not respond smoothly.
0
Do not operate the touch screen using an object with a sharp or hard tip.
0
Pressing two or more places at a time may cause a malfunction.
0
Tap the buttons (icons) on the touch screen accurately. The buttons may not respond if they are not tapped on the right area.
0
Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is misaligned with the touched area. (Adjust by lightly tapping with a corner of an SD card, etc. Do not press with an object with a sharp tip or do not press hard.)
“TOUCH SCREEN ADJUST” (A p. 129)
Names of Buttons and Functions on the LCD Monitor
The following screens are displayed during the video and still image modes, and operate as the touch screens.
Recording Screen (Video/Still Image)
.
1
7
2
3 4 65
1
Parallax Adjustment Button
0
Adjusts the 3D effect when 3D images are displayed on the LCD monitor.
“Adjusting Parallax During Recording” (A p. 35)
2
Zoom Button
“Zooming” (A p. 32)
3
Recording/Playback Mode Button
0
Switches between recording and playback modes.
4
Recording Start/Stop Button
0
g: Video Recording Start Button
0
a: Video Recording Stop Button
0
Q: Still Image Recording Button
5
LCD Monitor 3D/2D Display Switching Button
0
Switches the display on the LCD monitor between 3D and 2D. The image will be recorded in 3D even if the display on the LCD monitor is set to 2D.
6
Menu Button
“Operating the Menu” (A p. 102)
7
Display Button
Some displays disappear after approximately 3 seconds. Use the n button to change the displays as shown below.
0
Tap n button Displays appear for approximately 3 seconds with every tap.
0
Tap and hold n button Displays are fixed such that they do not disappear. After setting, the display button changes from n to m. Tap m to release the displays.
Playback Screen (Video)
.
00:01:23 00:12:34
7
2 3
54 6
1
1
Parallax Adjustment Button
0
Adjusts the 3D effect when 3D images are displayed on the LCD monitor.
“Adjusting Parallax During Playback” (A p. 57)
2
Recording/Playback Mode Button
0
Switches between recording and playback modes.
3
Index Screen Button
“Operation Buttons for Video Playback” (A p. 54)
4
Delete Button
“Deleting the Currently Displayed File” (A p. 67)
5
LCD Monitor 3D/2D Display Switching Button
0
Switches the display on the LCD monitor between 3D and 2D.
6
Menu Button
“Operating the Menu” (A p. 102)
7
Operation Buttons
“Operation Buttons for Video Playback” (A p. 54)
Playback Screen (Still Image)
.
8
32465 7
1
1
Group Playback Button
0
Continuous playback of grouped files (such as still images captured by continuous shooting).
“Playing Back Still Images” (A p. 56)
2
Parallax Adjustment Button
0
Adjusts the 3D effect when 3D images are displayed on the LCD monitor.
“Adjusting Parallax During Playback” (A p. 57)
3
Recording/Playback Mode Button
0
Switches between recording and playback modes.
4
Index Screen Button
“Operation Buttons for Still Image Playback” (A p. 56)
5
Delete Button
“Deleting the Currently Displayed File” (A p. 67)
Getting Started
18
6
LCD Monitor 3D/2D Display Switching Button
0
Switches the display on the LCD monitor between 3D and 2D.
7
Menu Button
“Operating the Menu” (A p. 102)
8
Operation Buttons
“Operation Buttons for Still Image Playback” (A p. 56)
Index Screen
.
2011
2011
1
2
3 45
6
7
1
Date Button
“Operation Buttons for Video Playback” (A p. 54) “Operation Buttons for Still Image Playback” (A p. 56)
2
Recording/Playback Mode Button
0
Switches between recording and playback modes.
3
Index Screen Switching Button (Still image only)
0
Switches between the group or full index screen displays.
4
Delete Button
“Deleting Selected Files” (A p. 67)
5
Playback Media Button
0
Switches between SD card and built-in memory.
6
Menu Button
“Operating the Menu” (A p. 102)
7
Page Forward/Back Button
“Operation Buttons for Video Playback” (A p. 54) “Operation Buttons for Still Image Playback” (A p. 56)
Menu Screen
.
TOUCH PRIORITY AE/AF
VIDEO
WIND CUT
GAIN UP
DIS
5
4
3
1 2
1
Help Button
2
Menu Items
3
Return Button
4
Common Menu Button
5
Close Button
“Operating the Menu” (A p. 102)
Clock Setting
The “SET DATE/TIME!” screen appears when you turn on this unit for the first time after purchase, when it has not been used for a long time, or when the clock is not set yet. Set the clock before recording.
1
Open the LCD monitor.
.
0
The unit turns on.
0
When the LCD monitor is closed, the unit turns off.
2
Tap “YES” when “SET DATE/TIME!” is displayed.
.
NOYES
SET DATE/TIME!
3
Set the date and time.
.
20111 1 10 00
SET
TIMEDATE
CLOCK SETTING
0
When the year, month, day, hour, or minute item is tapped, “∧” and “∨” will be displayed.
0
Tap ∧ or ∨ to adjust the year, month, day, hour, and minute.
4
After setting the date and time, tap “SET”.
.
20111 1 10 00
SET
TIMEDATE
CLOCK SETTING
5
Select the region where you live and tap “SAVE”.
.
GMT
SAVE
CLOCK/AREA SETTING
0
The city name and time difference are displayed.
0
Tap “<” or “>” to select the city name.
Memo :
0
The clock can be reset again later.
“Resetting the Clock” (A p. 20)
Getting Started
19
0
When using this unit overseas, you can set it to the local time for recording.
“Setting the Clock to Local Time when Traveling” (A p. 25)
0
“SET DATE/TIME!” is displayed when you turn on this unit after it has not been used for a prolonged period. Connect the AC adapter for more than 24 hours to charge the internal clock battery of this unit before setting the clock.
“Charging the Battery Pack” (A p. 15)
Resetting the Clock
Set the clock with “CLOCK ADJUST” from the menu.
1
Tap “MENU”.
.
2
Tap “Q”.
.
3
Tap “CLOCK ADJUST”.
.
CLOCK ADJUST
COMMON
0
Tap ∧ or ∨ to move upward or downward for more selection.
4
Tap “CLOCK SETTING”.
.
CLOCK SETTING
CLOCK ADJUST
5
Set the date and time.
.
20111 1 10 00
SET
TIMEDATE
CLOCK SETTING
0
When the year, month, day, hour, or minute item is tapped, “∧” and “∨” will be displayed.
0
Tap ∧ or ∨ to adjust the year, month, day, hour, and minute.
6
After setting the date and time, tap “SET”.
.
20111 1 10 00
SET
TIMEDATE
CLOCK SETTING
Getting Started
20
7
Select the region where you live and tap “SAVE”.
.
GMT
SAVE
CLOCK/AREA SETTING
0
The city name and time difference are displayed.
0
Tap < or > to select the city name.
Changing the Display Language
The language on the display can be changed.
1
Tap “MENU”.
.
2
Tap “Q”.
.
3
Tap “LANGUAGE”.
.
COMMON
LANGUAGE
0
Tap ∧ or ∨ to move upward or downward for more selection.
4
Tap to the desired language.
.
ENGLISH
LANGUAGE
0
Tap ∧ or ∨ to move upward or downward for more selection.
Getting Started
21
Holding this Unit
When holding this unit, keep your elbows close to your sides to prevent camera shake.
.
0
Hold the LCD monitor with your left hand and adjust the angle accordingly. Holding the LCD monitor with your left hand helps to stabilize the camera for recording.
Caution :
0
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is being used by children.
Memo :
0
If camera shake is excessive, use the digital image stabilizer.
“Reducing Camera Shake” (A p. 45)
Tripod Mounting
This unit can be mounted on a tripod (or monopod). This is useful for preventing camera shake.
.
0
To prevent this unit from falling off, check the tripod mounting screw holes and positioning holes on the unit carefully before mounting, and turn the screws until they are fastened firmly.
Caution :
0
To prevent injuries or damages which may result if this unit falls off, read the instruction manual of the tripod (or monopod) to be used and make sure that it is securely attached.
Memo :
0
It is recommended to use a tripod or monopod when recording in conditions prone to camera shake (such as in dark places or when zoomed to the telephoto end).
0
Set the digital image stabilizer to Z (OFF) when using a tripod for recording.
“Reducing Camera Shake” (A p. 45)
Using the Remote Control
You can operate this unit from a distance away using the supplied remote control.
.
Remote Sensor
Memo :
0
Point the remote control toward the sensor directly and use it within 5 m from this unit.
0
The transmitted beam may not be effective or may cause incorrect operation when the sensor is directly exposed to sunlight or powerful lighting.
Preparing the Remote Control
Using the Remote Control for the First Time
.
Pull out the insulation sheet
0
A button battery (CR2025) is included inside the remote control at the time of purchase. Remove the insulation sheet before use.
Reinserting the Battery
.
Lock Tab
Button Battery
0
Pull out the battery holder by pressing the lock tab.
0
Insert the button battery with the + side facing upward.
Getting Started
22
Operation Buttons on Remote Control Unit
.
INFO
SNAP SHOT
ST ART /STOP
INDEX
4
5
6
1
2
3
1
Recording Start/Stop Button
0
Starts/stops video recording.
2
Still Image Button
0
Takes a still image.
3
Zoom Button
0
T: Zooms in
0
W: Zooms out
4
Basic Playback Operations
Operation Button Description
Playback/Pause Button d / e
0
Starts/pauses playback of videos or slideshows.
Left Button j
0
Moves the cursor to the left.
0
Performs reverse search during playback.
Right Button i
0
Moves the cursor to the right.
0
Performs forward search during playback.
T Button N
0
Zooms in. (during pause)
0
Turns up (+) the volume during video playback.
W Button O
0
Zooms out. (during pause)
0
Turns down (-) the volume during video playback.
5
Index Button
0
Stops playback and returns to thumbnail display.
6
Info Button
0
Recording: Displays the remaining time (for video only) and battery power.
0
Playback: Displays file information such as recording date.
Attaching Headphones
You can attach optional headphones to this unit.
1
Open the cover of the headphones connector.
.
2
Connect the headphones to the headphones connector.
.
Memo :
0
The volume level of the headphones can be adjusted using “HEADPHONE VOL. ADJ.” in the menu.
“HEADPHONE VOL. ADJ.” (A p. 112)
Getting Started
23
Attaching an External Microphone
You can attach an external microphone (commercially available) to this unit.
1
Attach an external microphone (commercially available) to the shoe.
.
2
Open the cover of the microphone connector and connect the cable of the external microphone.
.
Memo :
0
Do not apply too much force when attaching accessories such as an external microphone.
0
The microphone level display and setting can be changed in the menu.
“MIC LEVEL” (A p. 111) “MIC LEVEL SETTING” (A p. 111)
Using this Unit Overseas
The shape of the power outlet varies according to countries and regions. To charge the battery pack, you need a converter plug that matches the shape of the outlet. “Charging the Battery Pack Overseas” (A p. 24) Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “CLOCK ADJUST”. “Setting the Clock to Local Time when Traveling” (A p. 25) When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is set 1 hour ahead. “Setting Daylight Saving Time” (A p. 25)
Charging the Battery Pack Overseas
The shape of the power outlet varies according to countries and regions. To charge the battery pack, you need a converter plug that matches the shape of the outlet.
.
ABBFCO
North America
United States
Canada
Mexico
A
A
A
India
Indonesia
Singapore
Sri Lanka
Thailand
South Korea
China
Japan
Nepal
Pakistan
Bangladesh
Philippines
Vietnam
Hong Kong Special
Administrative Region
Macau Special
Administrative Region
Malaysia
Ｂ.Ｃ.ＢＦ
Ｃ
Ｂ.ＢＦ
Ｂ.Ｃ.ＢＦ
A.BF.C
A.C
A.B.BF.C.O
A
C
B.C
C
A.BF.O
A.C
B.BF
B.C
B.BF.C
Europe
Iceland
Ireland
United Kingdom
Italy
Austria
Netherlands
Canary Islands
Greece
Switzerland
Sweden
Spain
Denmark
Germany
Norway
Hungary
Finland
France
Belgium
Poland
Portugal
Romania
C
C
B.BF
C
C
C
C
C
C
C
A.C
C
C
C
C
C
C
C
B.C
B.C
C
Asia
Oceania
Australia
Guam
Tahiti
Tonga
New Zealand
Fiji
O
A
C
O
O
O
Argentina
Colombia
Jamaica
Chile
Haiti
Panama
Bahamas
Puerto Rico
Brazil
Venezuela
Peru
O
A
A
B.C
A
A
A
A
A.C
A
A.C
Latin
Middle East
Israel
Iran
Kuwait
Jordan
C
C
B.C
B.BF
Algeria
Egypt
Guinea
Kenya
Zambia
Tanzania
Republic of South Africa
Mozambique
Morocco
A.B.BF.C
B.BF.C
C
B.C
B.BF
B.BF
B.C.BF
C
C
Africa
Getting Started
24
Setting the Clock to Local Time when Traveling
Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “CLOCK ADJUST”.
Restore the region settings after you returned from the trip.
1
Tap “MENU”.
.
2
Tap “Q”.
.
3
Tap “CLOCK ADJUST”.
.
CLOCK ADJUST
COMMON
0
Tap ∧ or ∨ to move upward or downward for more selection.
4
Tap “AREA SETTING”.
.
CLOCK ADJUST
AREA SETTING
5
Select the area you are traveling to and tap “SAVE”.
.
GMT
SAVE
AREA SETTING
0
The city name and time difference are displayed.
0
Tap < or > to select the city name.
Memo :
0
Setting “AREA SETTING” changes the clock time such that time difference is accounted for. After returning to your country, re-select the region that was set initially to restore the original clock settings.
Setting Daylight Saving Time
When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is set 1 hour ahead.
1
Tap “MENU”.
.
2
Tap “Q”.
.
3
Tap “CLOCK ADJUST”.
.
CLOCK ADJUST
COMMON
0
Tap ∧ or ∨ to move upward or downward for more selection.
4
Tap “DST SETTING”.
.
CLOCK ADJUST
DST SETTING
5
Tap “ON”.
.

DAYLIGHT SAVING TIME (DST)
DST SETTING
OFFON
CURRENT SETTING: ON
Memo :
0
What is daylight saving time? Daylight saving time is the system of setting the clock 1 hour ahead for a fixed period in summer. It is used mainly in the Western countries.
0
Restore the daylight saving time settings after you returned from the trip.
Getting Started
25
Optional Accessories
You can record for a longer time by using the optional battery pack.
Product Name Description
Battery Pack
0
BN-VF815U
0
BN-VF823U
0
BN-VF815U is the same battery pack that comes with this unit. BN-VF823U provides a longer recording time than the provided battery pack. It can also be used as a spare battery pack.
Battery Charger
0
AA-VF8
0
Enables the battery pack to be charged without using this unit.
HDMI Cable
0
VX-HD310
0
VX-HD315
0
VX-HD320
0
VX-HD330
0
Allows viewing in high picture quality when connected to a TV.
0
Transmits video, audio, and control signals between devices.
Memo :
0
For more information, consult your JVC dealer.
0
For details on the provided accessories, refer to “Verifying the Accessories”.
“Verifying the Accessories” (A p. 13)
Approximate Recording Time (Using Battery)
o
3D Display on LCD Monitor
Battery Pack Actual Recording Time
3D Recording MP4(MVC) 3D Recording AVCHD 3D * 3D Recording AVCHD
BN-VF815U (Supplied)
55 m 55 m 1 h
BN-VF823U 1 h 20 m 1 h 20 m 1 h 35 m
Battery Pack Continuous Recording Time
3D Recording MP4(MVC) 3D Recording AVCHD 3D * 3D Recording AVCHD
BN-VF815U (Supplied)
1 h 45 m 1 h 45 m 2 h
BN-VF823U 2 h 40 m 2 h 40 m 3 h 5 m
o
2D Display on LCD Monitor
Battery Pack Actual Recording Time
3D Recording MP4(MVC) 3D Recording AVCHD 3D * 3D Recording AVCHD 2D Recording
BN-VF815U (Supplied)
55 m 55 m 1 h 5 m 1 h 20 m
BN-VF823U 1 h 25 m 1 h 25 m 1 h 40 m 1 h 55 m
Battery Pack Continuous Recording Time Continuous Recording
Time
3D Recording MP4(MVC) 3D Recording AVCHD 3D * 3D Recording AVCHD 2D Recording
BN-VF815U (Supplied)
1 h 50 m 1 h 50 m 2 h 10 m 2 h 35 m
BN-VF823U 2 h 45 m 2 h 45 m 3 h 15 m 3 h 50 m
0
The above are values when “MONITOR BRIGHTNESS” is set to “STANDARD”.
0
The actual recording time may be shorter if zooming is used or if recording is stopped repeatedly. (It is recommended to prepare battery packs ready for three times the expected recording time.)
0
When the battery life is reached, the recording time becomes shorter even if the battery pack is fully charged. (Replace the battery pack with a new one.)
* For customers who completed the firmware update
Getting Started
26
Taking Videos in 3D Mode
You can record 3D images by pressing the 3D button to set to the 3D mode. During 3D mode, “3D” is displayed on the LCD monitor.
1
Open the lens cover.
.
2
Open the LCD monitor and select the video mode.
.
0
The video mode icon A appears.
3
Check if the recording mode is P Intelligent Auto.
.
0
If the mode is H Manual, press the H/T button to switch to P Intelligent Auto. The mode changes between Intelligent Auto and Manual with every press.
4
Press the 3D button to set to the 3D mode.
.
0
During 3D mode, “3D” is displayed on the LCD monitor.
0
3D images may be recorded when the 3D button lights up.
5
Start recording.
.
0
Press again to stop.
Memo :
0
To record 3D images, refer also to ““Precautions on Recording and Playing Back 3D Images” (A p. 11) ”.
0
If the left and right images of an object close to the camera do not appear to be in alignment, or the 3D effect of a distant object is weak, adjust the parallax.
“Adjusting Parallax During Recording” (A p. 35)
0
When “PARALLAX ADJUSTMENT” is assigned to the ADJ button, parallax can be adjusted manually using the ADJ button and control dial.
“Using the Control Dial for Recording” (A p. 44)
0
You can change the display on the LCD monitor between 3D and 2D during recording by tapping on the 3D/2D icon. The image will be recorded
in 3D even if the display on the LCD monitor is set to 2D. To record 2D images, press the 3D button to switch to the 2D mode before recording.
“Taking Videos in Intelligent Auto Mode” (A p. 30)
0
If the microphone level is frequently displayed in red, lower the setting in “MIC LEVEL SETTING” such that the display turns green so that more realistic audio sounds can be recorded.
“MIC LEVEL SETTING” (A p. 111)
3D recording formats
There are 2 types of 3D recording formats, namely “AVCHD” and “MP4(MVC)”. By default, “3D VIDEO REC FORMAT” is set to “AVCHD”. “Changing the Setting” (A p. 107)
o
AVCHD
Set to this recording format for higher compatibility.
.
The picture signals for left and right eyes are compressed by 1/2 horizontally and then combined in a side-by-side format.
Side-by-Side
During Recording
Display Example (Line-by-Line)
AVC HD
1080
960
AVCHD 960 × 1080/60i
o
MP4(MVC)
Set to this recording format for higher video quality.
.
Display Example (Frame Sequential)
The 2 channel full HD 60i picture is recorded as the pic­ture signals for left and right eyes.
LR Independent
1920 × 1080/60i Full HD × 2ch
During Recording
1080
1920
MP4(MVC)
Memo :
0
Videos recorded in “MP4(MVC)” format are saved in full high definition and can only be played back on this unit.
0
To record 3D images to a disc with a Blu-ray recorder or a computer, set to “AVCHD”.
0
By dubbing videos recorded in “AVCHD” format to a Blu-ray recorder, the left and right images will be recorded or played back separately, allowing 3D images to be enjoyed when connected to a 3D compatible TV.
0
Videos recorded in “MP4(MVC)” and “AVCHD” are displayed on the playback index screen separately.
Recording
27
3D Recording Formats (For customers who completed the firmware update)
There are 3 types of 3D recording formats, namely “ AVCHD 3D ”, “AVCHD” and “MP4(MVC)”. After the firmware update, “3D VIDEO REC FORMAT” will be set to “ AVCHD 3D ”. “Changing the Setting” (A p. 107)
o
AVCHD 3D
A method to record in high picture quality while maintaining the compatibility. (Videos can be saved to a disc by using the AVCHD 3D compatible Blu-ray recorder. Please check “Copying Your Files” for details).
.
1920
1080
Display Example (Frame Sequential)
During Recording
The 2 channel full HD 60i picture is recorded as the picture signals for left and right eyes.
1920 × 1080/60i Full HD × 2ch
LR Independent
AVCHD 3D
o
AVCHD
Set to this recording format for higher compatibility. (Videos can be saved to a disc by using the AVCHD or AVCHD 3D compatible Blu-ray recorder. Please check “Copying Your Files” for details).
.
The picture signals for left and right eyes are compressed by 1/2 horizontally and then combined in a side-by-side format.
Side-by-Side
During Recording
Display Example (Line-by-Line)
AVC HD
1080
960
AVCHD 960 × 1080/60i
o
MP4(MVC)
A method to record videos that are immersive and with high-resolution.
.
Display Example (Frame Sequential)
The 2 channel full HD 60i picture is recorded as the pic­ture signals for left and right eyes.
LR Independent
1920 × 1080/60i Full HD × 2ch
During Recording
1080
1920
MP4(MVC)
Memo :
0
Videos recorded in “MP4(MVC)” format are saved in full high definition and can only be played back on this unit.
0
To record 3D images to a disc by using a Blu-ray recorder or a computer, set to “ AVCHD 3D ” or “AVCHD”.
0
By dubbing videos recorded in “AVCHD” format to a Blu-ray recorder, the left and right images will be recorded or played back separately, allowing 3D images to be enjoyed when connected to a 3D compatible TV.
0
Videos recorded in “MP4(MVC)”, “AVCHD 3D” and “AVCHD” are displayed on the playback index screen separately.
Recording
28
Taking Still Images in 3D Mode
You can record 3D images by pressing the 3D button to set to the 3D mode. During 3D mode, “3D” is displayed on the LCD monitor.
1
Open the lens cover.
.
2
Open the LCD monitor and select the still image mode.
.
0
The still image icon B appears.
3
Press the 3D button to set to the 3D mode.
.
0
During 3D mode, “3D” is displayed on the LCD monitor.
0
3D images may be recorded when the 3D button lights up.
4
Set the focus on the subject.
.
Press halfway
0
When focused, the focus icon lights up in green.
5
Take a still image.
.
Press fully
0
PHOTO lights up when a still image is being captured.
Memo :
0
When 3D recording is performed, still images will be saved in both 3D and 2D formats.
0
3D still images are saved as MP files (*.mpo).
0
3D still images can only be printed by the 3D printing service. When printing by other than 3D printing service, use the 2D still images (shot simultaneously when 3D still images are shot) for printing.
0
Use the provided software (Everio Media Browser 3D) to transfer 3D still images to a computer for playback.
“Copying to Windows PC” (A p. 94)
0
To record 3D images, refer also to ““Precautions on Recording and Playing Back 3D Images” (A p. 11) ”.
0
If the left and right images of an object close to the camera do not appear to be in alignment, or the 3D effect of a distant object is weak, adjust the parallax.
“Adjusting Parallax During Recording” (A p. 35)
0
When “PARALLAX ADJUSTMENT” is assigned to the ADJ button, parallax can be adjusted manually using the ADJ button and control dial.
“Using the Control Dial for Recording” (A p. 44)
Recording
29
Taking Videos in Intelligent Auto Mode
You can record without worrying about the setting details by using the Intelligent Auto mode.
0
Before recording an important scene, it is recommended to conduct a trial recording.
1
Open the lens cover.
.
2
Open the LCD monitor and select the video mode.
.
0
The video mode icon A appears.
3
Check if the recording mode is P Intelligent Auto.
.
0
If the mode is H Manual, press the H/T button to switch to P Intelligent Auto. The mode changes between Intelligent Auto and Manual with every press.
4
Start recording.
.
0
Press again to stop.
Indications During Video Recording
.
0:00:00 [2:04]
Display Icon Description
1
Parallax Adjustment Value (3D mode only)
Displays the adjusted value when performing parallax adjustment manually. “Adjusting Parallax During Recording” (A p. 35)
2
3D VIDEO REC FORMAT (3D mode only)
Displays the recording format for 3D video recording.
3
Video Quality Displays the icon of the “VIDEO QUALITY”
setting selected in the recording menu. “VIDEO QUALITY” (A p. 108)
4
3D/2D Mode Displays the current recording mode of 3D or
2D. “3D” is displayed during 3D recording, while “2D” is displayed during 2D recording.
5
Image Stabilizer Displays the icon of the “DIS” setting selected
in the recording menu. “Reducing Camera Shake” (A p. 45)
6
Recording Media Displays the icon of the media where videos
are recorded to. You can change the setting with “REC MEDIA FOR VIDEO”. “REC MEDIA FOR VIDEO” (A p. 125)
7
Battery Indicator Displays the approximate remaining battery
power. Details of the battery power can be displayed by pressing the INFO button. “Remaining Recording Time/Battery Power” (A p. 50)
8
Recording Mode Displays the current recording mode of P
(Intelligent Auto) or H (Manual). The mode changes with every press of the i.AUTO button.
9
Remaining Recording Time
Displays the remaining time for video recording.
0
Scene Counter (Recorded Time)
Displays the elapsed time of the video that is currently being recorded.
Recording
30
Loading...
+ 120 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use