JVC DD868EU, HR-DD868EU Instructions Manual

HR-DD868EU
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
VCR
TV
CABLE
/SAT
– –:– –
AUDIO
0000
START DEBUT
STOP
FIN
DATE
TV
PROG
DAILY/QTDN.
VPS/PDC
AUX
WEEKLY/HEBDO
EXPRESS
LCD PROG
ENTER/ENTREE
0
PROG
MENU
OK
30 SEC
T
V
P
R
O
G
+
T
V
P
R
O
G
T
V
T
V
+
PAL
REW
FF
SHUTTLE
TIMER
STANDBY/ON
VIDEO
(MONO)
L –AUDIO– R
REC LINK
TV PROG
TV PROG
REVIEW
SP
VPS/PDC
VCR
+ 8 4
0 6 15dB NORM
S
L
O
W
S
L
O
W
SYNCHRO EDIT
INSERT
A.DUB
JOG
EN
CONTENTS
SAFETY FIRST 2
Safety Precautions ................................... 2
INSTALLING YOUR NEW RECORDER 3
Basic Connections................................... 3
INITIAL SETTINGS 4
Auto Set Up ............................................ 4
Preset Download..................................... 6
Language ................................................ 8
On-Screen Displays ................................ 9
Power Save Mode ................................. 10
T-V LINK 11
T-V Link Functions ................................. 11
INFORMATION ON COLOUR SYSTEM 12
Colour System Set ................................. 12
PLAYBACK 13
Basic Playback ...................................... 13
Playback Features ................................. 14
TimeScan .............................................. 18
RECORDING 20
Basic Recording .................................... 20
Recording Features................................ 21
B.E.S.T. Picture System .......................... 24
TIMER RECORDING 26
SHOWVIEW Timer Programming .............. 26
Express Timer Programming .................. 28
Automatic Satellite
Programme Recording........................... 32
SPECIAL FEATURES 33
Remote Control Functions..................... 33
EDITING 36
Edit From A Camcorder......................... 36
Synchro Editing ..................................... 37
Edit To Or From Another Video
Recorder ............................................... 38
Insert Editing ......................................... 40
Audio Dubbing ..................................... 42
INFORMATION ON J TERMINAL 43 SYSTEM CONNECTIONS 44
Connection To A Satellite Tuner ............. 44
Connecting/Using A Decoder................ 46
Connecting/Using A Stereo System........ 47
SUBSIDIARY SETTINGS 48
Tuner Set ............................................... 48
Video Channel Set................................. 55
Clock Set............................................... 56
SHOWVIEW Setup .................................... 58
TROUBLESHOOTING 59 QUESTIONS AND ANSWERS 61 INDEX 62 SPECIFICATIONS 66
ENGLISH
VIDEO CASSETE RECORDER
INSTRUCTIONS
LPT0250-001A
FIRST
SEE
AUTO SET-UP
ON BACK
2 EN
SAFETY FIRST
Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.
1. DO NOT place the recorder . . .
... in an environment prone to extreme temperatures or
humidity. ... in direct sunlight. ... in a dusty environment. ... in an environment where strong magnetic fields are
generated. ... on a surface that is unstable or subject to vibration.
2. DO NOT block the recorder’s ventilation openings.
3. DO NOT place heavy objects on the recorder or remote control.
4. DO NOT place anything which might spill on top of the recorder or remote control.
5. AVOID violent shocks to the recorder during transport.
MOISTURE CONDENSATION
Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.
ABOUT HEAD CLEANING
Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or inter­rupted. Be sure to contact your nearest JVC dealer if such troubles occur.
IMPORTANT
n Please read the various precautions on this page before
installing or operating the recorder.
n It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video record­ing, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.
Safety Precautions
The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating
current on and off. " " shows electrical power standby and " " shows ON.
Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single-speed video recorder.
n Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder, however, only VHS signals can be played back and recorded.
n HQ VHS is compatible with existing VHS equipment. n SHOWVIEW is a trademark of Gemstar Development Corpora-
tion. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.
CAUTION
n When you are not using the recorder for a long period of
time, it is recommended that you disconnect the power cord from the mains outlet.
n Dangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.
WARNING
There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).
1.This recorder can also receive SECAM-B colour television signals for recording and playback.
2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).
3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.
4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.
For Italy:
"It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.'95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.'95"
The rating plate and the safety caution are on the rear of the unit.
W ARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
PAL
EN 3
Basic Connections
CHECK CONTENTS
1
Make sure the package contains all of the accessories listed in “Specifications” (Z pg. 66).
SITUATE RECORDER
2
Place the recorder on a stable, horizontal surface.
CONNECT RECORDER TO TV
3
The connection method you use depends on the type of TV you have.
RF CONNECTION
To Connect To A TV With NO AV Input Terminals . . .
a– Disconnect the TV aerial cable from the TV. b– Connect the TV aerial cable to the ANT. IN jack
on the rear panel of the recorder.
c– Connect the provided RF cable between the RF
OUT jack on the rear panel of the recorder and the TV’s aerial terminal.
AV CONNECTION
To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
b– Connect an optional SCART cable between the
AV1 IN/OUT socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.
CONNECT RECORDER TO MAINS
4
Plug the end of the mains power cord into a mains outlet.
It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
INSTALLING YOUR NEW RECORDER
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO
OUT
JLIP
SYNCHRO EDIT
21-pin SCART Cable
21-pin SCART connector
Back of TV
Mains Power Cord
Aerial terminal
Rear view
Mains outlet
AV1 IN/OUT
RF Cable (provided)
TV Aerial Cable
After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to page 4 to perform Auto Set Up.
Make A V connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.
4 EN
INITIAL SETTINGS
When the button on the recorder/remote control is pressed for the first time to power on the recorder after you plug the mains power cord into a mains outlet, the Country Set display will appear on the TV screen and the recorder's front display panel. By simply selecting your country*, the Auto Set Up function sets the tuner channels, clock** and Guide Program numbers automatically.
* * If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
** If you live in Hungary (MAGYARORSZAG), Czech Republic (CESKA
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe (OTHER EASTERN EUROPE), set the clock manually.
You can refer to the front display panel and/or the on-screen display to perform this procedure.
Auto Set Up
Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set
TURN ON THE RECORDER
1
Press on the recorder or remote control. The Country Set display appears on the front display panel and/or on the screen.
NOTE:
If you have connected your TV to the recorder with RF connection and the on­screen display appearing on UHF channel 36 looks distorted, perform "Video Channel Set" on page 55.
SELECT COUNTRY
2
If you are referring to the front display panel
Press
%
to select your international telephone country code
of your country referring to the chart in the left column.
If you are referring to the on-screen display
Press
%
to move the highlight bar (pointer) to your country's name.
NOTE:
If you have selected BELGIUM (32) or SUISSE (41), go to step 3. If you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE), press OK. The Clock Set screen will appear. Set the clock manually (Z pg. 56 – 57), then go to step 4. If you have selected any other country name (code), go to step 4.
ATTENTION
Once you have performed Auto Set Up, even if the recorder's memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder's memory and the recorder will not perform Auto Set Up again. You only need to set the clock. (Z pg. 56)
If you have moved to a different area, perform each setting as required.
Video Channel setting (for RF connection users) Z pg. 55
Tuner setting Z pg. 48
Clock setting Z pg. 56
If a new station starts broadcasting in your area, perform tuner setting (Z pg. 48) and, if necessary, video channel setting (Z pg. 55).
(Ex.) DEUTSCHLAND is selected
Before starting, make sure of the following:
The TV aerial cable should be connected to the recorder.
The recorder's mains power cord should be connected to
a mains outlet.
If you want to use the on-screen display, the TV should be set to its AV mode (with AV connection Z pg. 3) or UHF channel 36 (with RF connection Z pg. 3).
BELGIUM
ESKÁ REPUBLIKA DANMARK DEUTSCHLAND ESPAÑA GREECE ITALIA MAGYARORSZÁG NEXT PAGE
[
5
] =
[MENU] : EXIT
BELGIUM
ESKÁ REPUBLIKA DANMARK
DEUTSCHLAND
ESPAÑA GREECE ITALIA MAGYARORSZÁG NEXT PAGE
[
5
] =
[MENU] : EXIT
International Telephone Country Code
BELGIUM : 32 NORGE : 47
ESKÁ REPUBLIKA : 42 ÖSTERREICH : 43 DANMARK : 45 POLSKA : 48 DEUTSCHLAND : 49 PORTUGAL : 351 ESPAÑA : 34 SUISSE : 41 GREECE : 30 SUOMI : 358 ITALIA :39 SVERIGE : 46 MAGYARORSZÁG : 36
OTHER WESTERN EUROPE
:- -
NEDERLAND : 31
OTHER EASTERN EUROPE
:EE
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
EN 5
SELECT LANGUAGE
3
Press OK. The Language Set display appears on the front display panel and/or on the screen.
If you are referring to the front display panel
Press
%
to select your language code.
If you are referring to the on-screen display
Press
%
to move the highlight bar (pointer) to the language of your choice.
PERFORM AUTO SET UP
4
Press OK.
If you are referring to the front display panel
Press
%
to select "Auto" and press OK or #.
If you are referring to the on-screen display
Press
%
to move the highlight bar (pointer) to "AUTO SET" and press OK or #.
"Auto" blinks on the display panel; do NOT press any button on the recorder or remote control until the display panel shows either the display as illustrated on page 7 or "– –:– –".
If you are using the on-
screen display , the AUTO SET screen will appear . As Auto Set Up progresses, the " " mark on the screen moves from left to right.
If "– –:– –" appears on the display panel, refer to
page 7.
NOTES:
Auto channel set function takes place first; it assigns automati­cally all receivable stations in your area.
Auto clock set function sets the clock automatically by reading the clock setting data from a station transmitting a PDC signal while auto channel set is being performed.
During auto channel set, the recorder recognizes each station name of the detected stations and stores them in the recorder's memory, then automatically sets S
HOWVIEW
assigned Guide Program number for those stations according to the broadcast area.
In the area where no TV station transmits a PDC signal, the recorder can perform neither auto clock set nor auto Guide Program number set.
If there is a power cut, or if you press or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.
Auto clock may not function properly depending on the reception condition.
AUTO SET
PLEASE WAIT
[MENU] : EXIT
0
+++
Beginning
End
(Ex.) DEUTSCH is selected for SUISSE
(Ex.) DEUTSCH is selected
International telephone country code
Language code
Language Code
ENGLISH : 01 NEDERLANDS : 06 DEUTSCH : 02 SVENSKA : 07 FRANCAIS :03 NORSK :08 ITALIANO : 04 SUOMI : 09 CASTELLANO : 05 DANSK : 10
AUTO SET
T-V LINK
[
5
] =
[MENU] : EXIT
DANSK SUOMI NORSK SVENSKA NEDERLANDS CASTELLANO ITALIANO FRANCAIS
DEUTSCH
ENGLISH
[
5
] =
[MENU] : ENDE
6 EN
INITIAL SETTINGS (cont.)
Preset Download
When you connect the recorder and your TV via fully-wired 21-pin SCART cable (Z pg. 3), you can set the recorder's tuner channels by downloading preset data from your TV instead of using the Auto Set Up function (Z pg. 4). After downloading is completed, the recorder sets the clock and Guide Program number automatically. For details, refer to the instruction manual for your TV.
PERFORM PRESET DOWNLOAD
1
Press OK.
If you are referring to the front display panel
Press
%
to select "CH – –" and press OK or #.
If you are referring to the on-screen display
Press
%
to move the highlight bar (pointer) to "T-V LINK" and press OK or #.
Preset position on the display panel increases from "CH1"; do NOT press any button on the recorder or remote control until the display panel shows either the display as illustrated on page 7 or "– –:– –".
If "– –:– –" appears on the display panel, refer to page
7.
If you are using the on-
screen display , the T-V LINK screen will appear . Then the GUIDE PROG SET screen will appear during Guide Program number set.
If you press any button
on the recorder or remote control while downloading is in progress, it will be interrupted.
SET VIDEO CHANNEL
2
Set the Video Channel to off manually. (Z pg. 55)
NOTES:
In the area where no TV station transmits a PDC signal, the recorder can perform neither auto clock set nor auto Guide Program number set.
If there is a power cut, or if you press or MENU while downloading or set up is in progress, it will be interrupted; be sure to turn off the recorder power once and try again from the beginning.
Auto clock may not function properly depending on the reception condition.
When you perform T-V LINK function, be sure to use fully­wired 21-pin SCART cable.
On this recorder, the characters available for station’s name (ID) are A–Z, 0–9, –, *, + and (space). Some downloaded station’s name may differ from those of your TV (Z pg. 52).
Perform steps 1 to 3 of "Auto Set Up" on page 4 and 5 before
continuing. You can use this function only with the TV offering T-V Link, etc.*
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NEXTVIEWLINK via fully­wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.
T-V LINK
PLEASE WAIT
[MENU] : EXIT
GUIDE PROG SET
PLEASE WAIT
[MENU] : EXIT
AUTO SET
T-V LINK
[
5
] =
[MENU] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
EN 7
If both auto channel set and auto clock set have been performed successfully:
1
Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the recorder's memory by using the TV PROG button(s).
If station names (ID — Z pg. 53) have also been stored in the recorder's memory, the station name will be displayed at the top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 50 – 54.
If auto channel set has succeeded but auto clock set has not:
1 Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in
the recorder's memory by using the TV PROG button(s).
If station names (ID — Z pg. 53) have also been stored in the recorder's memory, the station name will be displayed at the top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 50 – 54.
2 Perform "Clock Set" on page 56.
If both auto channel set and auto clock set have failed:
1
Make sure the TV aerial cable is connected properly to the recorder and turn off the recorder power once, then turn the recorder power back on again.
The Country Set display appears on the front display panel and/or on the screen; perform steps 2 4 on pages 4 – 5 again or perform the procedure on page 6.
IMPORTANT
n In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not
work properly. If the Guide Program numbers are not set properly, when you timer-record a TV programme using SHOWVIEW, the recorder will record a TV programme of a different station. When programming the timer using SHOWVIEW, be sure to check whether the channel position on which your recorder receives the broadcasting station you wish to record is selected (Z pg. 26, "SHOWVIEW Timer Programming").
n Your video recorder memorizes all detected stations even if reception of some of them is poor. In these cases picture quality
may be poor. To delete those stations with an unacceptable picture Z "Delete A Channel" on page 51.
A
B
C
When auto channel set has been completed successfully but auto clock set has not, "1" (channel position) will be displayed after the OK button is pressed in step 4 on page 5 or in step 1 on page 6.
When neither auto channel set nor auto clock set has been completed success­fully, "– –:– –" will be displayed.
When both auto channel set and auto clock set have been completed success­fully the correct current time will be displayed after the OK button is pressed in step 4 on page 5 or in step 1 on page 6.
You can check if the Guide Program numbers have been set correctly when you perform SHOWVIEW Timer Programming (Z pg. 26); if the correct channel position number is displayed in step 3, this confirms that the Guide Program number for the SHOWVIEW number you enter in step 2 has been set correctly.
Results of Auto Set Up/Preset Download appear on the front display panel
INFORMATION
Language for the on-screen display
Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in step 2 on page 4 (unless you have selected BELGIUM or SUISSE), as shown below.
SUOMI [ SUOMI DANMARK [ DANSK NEDERLAND [ NEDERLANDS PORTUGAL [ ENGLISH ÖSTERREICH [ DEUTSCH GREECE [ ENGLISH DEUTSCHLAND [ DEUTSCH ESKÁ REPUBLIKA [ ENGLISH OTHER WESTERN EUROPE [ ENGLISH POLSKA [ ENGLISH ITALIA [ ITALIANO OTHER EASTERN EUROPE [ ENGLISH NORGE [ NORSK MAGYARORSZÁG [ ENGLISH SVERIGE [ SVENSKA ESPAÑA [ CASTELLANO If you want to change the language setting manually, Z "Language" on page 8.
Just Clock
Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to "ON".
Z "Just Clock" on page 56.
A
B
C
8 EN
INITIAL SETTINGS (cont.)
Language
This recorder offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically (Z pg. 7), you can change the language setting manually using this procedure as required.
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU
2
Press MENU.
ACCESS COUNTRY SET SCREEN
3
Press
%
to move the highlight bar (pointer) to "AUTO CH SET", then press OK or #.
SELECT COUNTRY
4
Press
%
to move the highlight bar (pointer) to your country's name, then press OK or #.
SELECT LANGUAGE
5
Press
%
to move the highlight bar (pointer) to the language of your choice.
You do not have to press
OK; pressing OK enters Auto Set/T-V LINK screen.
RETURN TO NORMAL SCREEN
6
Press MENU.
Turn on the TV and select the VIDEO channel (or AV mode).
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET INITIAL SET REC LEVEL CTL
[
5
] =
[MENU] : EXIT
DANSK SUOMI NORSK SVENSKA NEDERLANDS CASTELLANO ITALIANO FRANCAIS DEUTSCH
ENGLISH
[
5
] =
[MENU] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
EN 9
On-Screen Displays
You can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF. Messages appear in the selected language (Z pg. 7 or 8).
Turn on the TV and select the VIDEO channel (or AV mode).
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU SCREEN
2
Press MENU.
ACCESS MODE SET SCREEN
3
Move the highlight bar (pointer) to "MODE SET" by pressing %fi, then press OK or #.
ENABLE/DISABLE ON-SCREEN DISPLAY
4
The default setting is “ON”, so if you want on-screen displays, leave the setting as it is and go to step 5. If you don’t want the displays to appear , press %fi to move the highlight bar (pointer) to "O.S.D." and press OK or # to set “O.S.D.” to “OFF”.
RETURN TO NORMAL SCREEN
5
Press MENU.
1– Operation mode indicators 2– Tape speed SP/LP/EP (EP is for NTSC playback only) 3– Tape direction 4– Counter display 5– Tape remaining time indicator (Z pg. 21) 6– Audio mode display (Z pg. 17) 7– Tape position indicator (Z pg. 13) 8– Type of Broadcast (Z pg. 23) 9– Current day/month/year 10– Clock display 11– Channel position number and station name/Aux. indicator
(L-1, L-2 or F-1)
12– Timer warning display (Z pg. 27, 29) 13– Cassette loaded mark
The superimposed indication on the TV screen tells you what the recorder is doing.
MODE SET
B. E. S. T . ON PICTURE CONTROL AUTO AUTO TIMER OFF
O. S. D. ON
DIRECT REC ON AUTO SP=LP TIMER OFF POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
q6
PR. 12 ABCD
]
SP
21 : 00
24. 12. 99 – WARNING– TIMER RECORDING TO START SOON
[
]
ST HI FI –1 : 23 : 45
NORM REMAIN 1 : 00
0
++
+
+
1
13
11
10
9
8 7
6
4
5
3
2
12
NOTES:
When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting.
During playback, the operation mode indicators may be disturbed depending on the type of tape being used.
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
10 EN
Power Save Mode
Turn on the TV and select the VIDEO channel (or AV mode).
You can reduce the power consumption while the recorder is turned off.
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU SCREEN
2
Press MENU.
ACCESS MODE SET SCREEN
3
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or #.
SELECT POWER SAVE MODE
4
Press %fi to move the highlight bar (pointer) to "POWER SAVE", then press OK or # to set to "ON".
RETURN TO NORMAL SCREEN
5
Press MENU.
NOTES:
During Power Save, the display panel will be turned off.
The Just Clock function (Z pg. 56) does not work while the Power Save mode is engaged.
While the recorder is in the Power Save mode, the picture may be distorted momentarily when you turn on/off the recorder.
Power Save does not work when ... ... the recorder is in the Timer mode. ... the recorder's power is turned off after timer-recording (or
Instant Timer Recording).
... the Auto Satellite Prog Recording mode is engaged
(Z pg. 32).
... "AV2 SELECT" is set to "DECODER" or "SAT" (Z pg. 39).
INITIAL SETTINGS (cont.)
MAIN MENU
MODE SET
AUTO CH SET MANUAL CH SET INITIAL SET REC LEVEL CTL
T
[
5
] =
[MENU] : EXIT
MODE SET
B. E. S. T . ON PICTURE CONTROL AUTO AUTO TIMER OFF O. S. D. ON DIRECT REC ON AUTO SP=LP TIMER OFF
POWER SAVE ON
NEXT PAGE
[5∞] = [MENU] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
EN 11
T-V LINK
T-V Link Functions
NexTView Link
You can download the EPG (Electronic Programme Guide) information from your TV for timer-programming on the recorder. For details, refer to the instruction manual for your TV.
TV Auto Power On
You can turn on the TV and set it to video mode automatically whenever you play a tape. For details, refer to the instruction manual for your TV.
VCR Auto Standby
You can use your TV's remote control to turn off the recorder. For details, refer to the instruction manual for your TV.
When you connect the recorder and your TV via fully-wired 21-pin SCART cable (Z pg. 3), the following functions are available. You can use these functions only with the TV offering T-V Link, etc.* For details, refer to the instruction manual for your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NEXTVIEWLINK via fully­wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.
Direct Rec
You can start recording the programme that you are watching on your TV with simple operation. Press and hold RECORD and press PLAY on the remote control, or press RECORD on the recorder. Follow the procedure below to use this function.
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU SCREEN
2
Press MENU.
ACCESS MODE SET SCREEN
3
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or #.
SELECT DIRECT REC MODE
4
Press %fi to move the highlight bar (pointer) to "DIRECT REC", then press OK or # to set to "ON".
RETURN TO NORMAL SCREEN
5
Press MENU.
NOTES:
• If "DIRECT REC" is set to "OFF", the RECORD button functions
as described in "Basic Recording" (Z pg. 20).
• During the Direct Rec, "– –" appears on the display panel.
• When you perform T-V LINK functions, be sure to use the
fully-wired 21-pin SCART cable.
• Retake function does not work during Direct Rec (Z pg. 22).
MAIN MENU
MODE SET
AUTO CH SET MANUAL CH SET INITIAL SET REC LEVEL CTL
T
[
5
] =
[MENU] : EXIT
MODE SET
B. E. S. T . ON PICTURE CONTROL AUTO AUTO TIMER OFF O. S. D. ON
DIRECT REC ON
AUTO SP=LP TIMER OFF POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
12 EN
Colour System Set
INFORMATION ON COLOUR SYSTEM
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU SCREEN
2
Press MENU.
ACCESS MODE SET SCREEN
3
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or #.
SELECT COLOUR SYSTEM MODE
4
Press %fi to move the highlight bar (pointer) to "COLOUR SYSTEM", then press OK or # to select the appropriate colour system.
a- PAL/NTSC: To record PAL signals, or play back a
PAL or NTSC tape.
b-MESECAM: To record SECAM signals, or play back a
MESECAM tape.
RETURN TO NORMAL SCREEN
5
Press MENU.
NOTES:
About NTSC Playback
Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.
The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)
The counter and tape remaining time readings will be incorrect.
During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.
Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.
You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this recorder. Follow the procedure below to select the appropriate colour system.
* SECAM signals will be recorded as MESECAM on this recorder;
MESECAM is the designation for tapes with SECAM signals that have
been recorded on a MESECAM-compatible PAL video cassette
recorder.
MAIN MENU
MODE SET
AUTO CH SET MANUAL CH SET INITIAL SET REC LEVEL CTL
T
[
5
] =
[MENU] : EXIT
PREVIOUS PAGE AV2 SELECT AV2
COLOUR SYSTEM PAL/NTSC
TIME SCAN AUDIO ON
[5∞] = [MENU] : EXIT
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO AUTO TIMER OFF O. S. D. ON DIRECT REC ON AUTO SP=LP TIMER OFF POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
EN 13
PLAYBACK
Basic Playback
The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.
Usable cassettes
LOAD A CASSETTE
1
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder. Don’t apply too much pressure when inserting.
The recorder power comes on automatically and the counter is reset to 0:00:00.
If the record safety tab has been removed, playback begins automatically.
FIND PROGRAMME START POINT
2
If the tape is advanced past the start point, press REW or turn the TIME SCAN SHUTTLE ring to the left. To go forward, press FF or turn the TIME SCAN SHUTTLE ring to the right.
START PLAYBACK
3
Press PLAY. “BEST” appears blinking in the recorder's display panel during automatic tracking. (Z pg. 24)
STOP PLAYBACK
4
Press STOP on the remote or STOP/EJECT on the recorder’s front panel. Then press STOP/EJECT to remove the cassette.
Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.
This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back a recorded Super VHS tape.
Turn on the TV and select the VIDEO channel (or AV mode).
Tape Position Indicator
The tape position indicator appears on screen when, from the Stop mode, you press FF, REW or perform an Index Search. The position of “5” in relation to “0” (beginning) or “+” (end) shows you where you are on the tape.
”O.S.D.” (Z pg. 9) must be set to “ON”, or the indicator will not appear.
NOTE:
Depending on the type of tape used, there may be times when the indication is not correct.
3
1:23:45
REMAIN 2:35
0
+++
Beginning End
TIME SCAN SHUTTLE
STOP/EJECT
PLAY
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
FF
PLAY
REW
STOP
14 EN
PLAYBACK (cont.)
Slow Motion
ACTIVATE SLOW-MOTION PLAYBACK
1
Turn the TIME SCAN SHUTTLE ring to the left or press @ during playback to decrease speed in the forward direction. To play in reverse slow-motion (and in reverse play mode), continue to turn the TIME SCAN SHUTTLE ring to the left or press @ after selecting all the forward direction slow-motion modes.
OR
During still picture, turn the TIME SCAN SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion.
OR
During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return to still picture.
OR
During still picture, press and hold @ or #. Release to return to still picture.
To resume normal playback, press PLAY.
Still Picture/Frame-By-Frame Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the TV PROG buttons to correct the picture.
During still picture, the sound from the previous 3 seconds (approx.) will be played back repeatedly (provided there was at least 6 seconds of normal playback prior to engaging the still picture mode).
"TIME SCAN AUDIO" must be set to "ON", or the sound will not be heard. (Z pg. 19)
ACTIVA TE FRAME-BY-FRAME PLAYBACK
2
Turn the JOG dial to the right for forward frame-by­frame playback, or to the left for reverse frame-by-frame playback.
OR
Press PAUSE.
OR
Press @ or #.
To resume normal playback, press PLAY.
A TTENTION
Picture may not appear during high-speed search with an LP-recorded tape.
In the high-speed search, still, slow motion or frame by frame playback mode, the picture will be distorted, and there will be a loss of colour.
Playback Features
PAUSE
TIME SCAN SHUTTLE
PLAY
JOG
TV PROG
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
FF
PLAY
REW
PAUSE
TV PROG
30 SEC
EN 15
Manual Tracking
Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons.
OVERRIDE AUTOMATIC TRACKING
1
Press on the remote to engage manual tracking.
ADJUST TRACKING MANUALLY
2
Press TV PROG + or – to adjust tracking.
RETURN TO AUTOMATIC TRACKING
3
Press on the remote to re-engage automatic
tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic tracking mode automatically.
Index Search
Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
Press @ or # ( or £). “ 1” or “£ 1” is displayed on screen and search begins in the corre­sponding direction.
T o access index codes 2 through 9, press @ or
#
repeatedly until the correct index number is displayed. Ex.: To locate the beginning of B from the current
position, press @ twice. To locate the beginning of D from the current position, press # once.
When the specified index code is located, playback begins automatically.
Current position
Index number
AB C D E F
–2 –1 1 2 3
%
%
£ 2
SKIP OVER UNWANTED SECTIONS
1
Press 30 SEC 1 to 4 times during playback. Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically.
NOTES:
To return to normal playback during a Skip Search, press PLAY.
It will be 9x normal playback speed with TimeScan (Zpg. 18) during a Skip Search.
Skip Search does not work properly during NTSC playback.
Skip Search
High-Speed (Turbo) Search
ACTIVATE HIGH-SPEED SEARCH
1
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, press and hold FF or REW for over 2 seconds during playback or still picture. When released, normal playback resumes.
Next Function Memory
The Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode. a– For Automatic Start Of Playback After Tape Rewind . . . . . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . . . . . press REW, then press within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . . . . . press REW, then press (TIMER) within 2 seconds.
16 EN
PLAYBACK (cont.)
Picture Control
This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS MODE SET SCREEN
2
Move the highlighted bar (pointer) to "MODE SET" by pressing %fi, then press OK or #.
SELECT PICTURE CONTROL SET MODE
3
Move the highlighted bar (pointer) to "PICTURE CONTROL" by pressing %fi, then press OK or # to select the desired mode. AUTO: Provides
optimised picture benefits of B.E.S.T. Picture System. Normally select AUTO.
EDIT: Minimizes picture degradation during editing
(recording and playback).
SOFT: Reduces image coarseness when viewing
overplayed tapes containing a lot of noise.
SHARP:Clearer, sharper-edged picture when viewing
images with lots of flat, same-coloured surfaces such as cartoons.
NOTES:
When you select EDIT, SOFT or SHARP, the selected mode will not change until you select again.
When you select EDIT to dub tapes, be sure to select AUTO after you finish dubbing the tapes.
RETURN TO NORMAL SCREEN
4
Press MENU.
NOTES:
When B.E.S.T. is OFF, "PICTURE CONTROL" switches automatically from AUTO to NORM.
Select EDIT when you are dubbing tapes. Refer to page 38.
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF O. S. D. ON DIRECT REC ON AUTO SP=LP TIMER OFF POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
REVIEW
STOP
REW
PLAY
FF
PAUSE
AUDIO
EN 17
Soundtrack Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO on the remote control changes the soundtrack being played back as follows:
TRACK
Recorder's Front Panel On-Screen Display
USE
+
HI FI
For Hi-Fi stereo tapes
LR
HI FI
For main audio of Bilingual tapes
L
HI FI
For sub audio of Bilingual tapes
R
NORM NORM For audio-dubbed tapes
+
+ NORM
HI FI
For audio-dubbed tapes
NORM
NOTES:
" + " should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.
For instructions on recording stereo and bilingual programmes, refer to page 23.
"O.S.D." must be set to "ON" or the on-screen displays will not appear (Z pg. 9).
Repeat Playback
Your video recorder can automatically play back the whole tape 50 times repeatedly.
START PLAYBACK
1
Press PLAY.
ACTIVA TE REPEAT PLAYBACK
2
Press PLAY and hold for over 5 seconds, then release.
The Play indicator ( ) on the display panel blinks slowly.
The tape plays 50 times automatically, and then stops.
STOP PLAYBACK
3
Press STOP at any time to stop playback.
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
Instant ReView
Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the Timer mode is disengaged.
ACTIVATE INSTANT REVIEW
1
Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.
The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically . You can access a programme as far as 9 index codes away from the current tape position.
NOTES:
Instant ReView is not possible while the recorder is in the Timer mode.
The number of recorded programmes will not be displayed on the front display panel after Auto Satellite Prog recording (Z pg. 32).
18 EN
PLAYBACK (cont.)
TimeScan
Your recorder is equipped with the TimeScan function. TimeScan allows noise free pictures to be displayed on your TV screen in the forward and reverse search modes. Audio will be played back at normal speed during the TimeScan modes (Z pg. 19). TimeScan also allows you to view a programme in search mode while listening to the audio.
NOTES:
"TIME SCAN AUDIO" must be set to "ON", or the sound will not be heard in TimeScan mode. (Z pg. 19)
The audio will not synchronize with the video in TimeScan modes.
In Pause mode 3 seconds (approx.) of audio will be played back repeatedly. (Z pg. 14)
In TimeScan search modes some of the audio information will not be played so that the audio can keep up with the video.
Slow motion is not possible with TimeScan.
1
2345
Audio signal during TimeScan
Sound of 1, 3 and 5 is heard. Sound of 2 and 4 is not heard. Output audio signal is normal (monaural) sound.
Playback tape
If the picture jitters vertically during variable-speed search:
1 Press PAUSE. 2 Press TV PROG + or – so that the vibration stops.
ACTIVATE VARIABLE-SPEED SEARCH
1
During playback, turn the recorder's TIME SCAN SHUTTLE ring. It remains at that position even after you
release it. Each time it passes a click position, the playback speed changes. (Refer to the chart on page 19 for playback speeds).
OR
During playback, press @ or #.
The more times you press, the faster the playback picture moves.
To decrease speed, press the button for the opposite direction. (Refer to the chart on page 19 for playback speeds).
To resume normal playback, press PLAY.
Variable-Speed Search
PLAY
PAUSE
TV PROG
TIME SCAN SHUTTLE
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
PLAY
TV PROG
PAUSE
EN 19
Names of special-effects playback
TimeScan
Speed LP
Speed SP
Audio output
When noise appears or the upper or lower part of the picture is distorted during TimeScan search, press and adjust tracking with TV PROG + or – button.
The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be distorted.)
To resume normal playback, press PLAY.
When using the recorder's TIME SCAN SHUTTLE ring, the playback speed may not change in the correct step if it is turned
too fast.
Picture and audio may become distorted when the recording speed changes. When this happens, resume normal playback once, and then try using TimeScan again.
The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with LP recordings.)
Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search of LP recordings, or depending on the tape being used.
Picture may appear distorted in comparison to normal playback.
Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
TimeScan sound quality will differ in comparison to normal playback.
When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 2x
normal speed, the audio playback may be faster than normal.
When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
Picture will be monochrome with an LP-recorded MESECAM tape during TimeScan.
TimeScan does not work with NTSC playback.
If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below).
TimeScan Audio
The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required. * The default setting is "ON".
1 Press MENU to access the Main Menu screen. 2 Move the highlight bar (pointer) to "MODE SET" by pressing
%
, then press OK or #.
3 Move the highlight bar (pointer) to "TIME SCAN AUDIO"
by pressing %fi, then press OK or # to select "ON" or "OFF".
4 Press MENU to return to the normal screen.
**Still mode cannot be engaged using the remote control's
@
or
#
button. Still mode can be engaged by
pressing the PAUSE button.
PREVIOUS PAGE AV2 SELECT AV2 COLOUR SYSTEM PAL/NTSC
TIME SCAN AUDIO ON
[5∞] = [MENU] : EXIT
MODE SET
B. E. S. T . ON
PICTURE CONTROL AUTO AUTO TIMER OFF O. S. D. ON DIRECT REC ON AUTO SP=LP TIMER OFF POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
Reverse Forward
Search Play Slow-Motion *Still Slow-Motion Play Search
-9x -7x -5x -3x -1x -1/6x -1/18x 0 1/18x 1/6x 1x 2x 3x 5x 7x 9x
-7x -3x -1/6x -1/18x 0 1/18x 1/6x 1x 2x 5x 9x
Audio is output.
Audio is not Audio is Audio is not
Audio is output.
output. output. output.
20 EN
TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.
RECORDING
Basic Recording
Turn on the TV and select the VIDEO channel (or AV mode).
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the channel you wish to record.
SET TAPE SPEED
3
Press SP/LP ( ). Check the SP/LP indicator on the recorder display panel to confirm the selected tape speed.
START RECORDING
4
Press and hold RECORD and press PLAY on the remote control, or press RECORD on the recorder.
PAUSE/RESUME RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on the recorder. Then press STOP/EJECT to remove the cassette.
To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.
Record safety tab
Accidental erasure prevention
B.E.S.T. takes place at the beginning of both the first SP and the first LP recording after inserting the cassette (Z pg. 24).
Recording Resume Function
If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.
If "DIRECT REC" is set to "ON", the programme that appears on the TV screen will be recorded (Z pg. 11).
PLAY
STOP/EJECT
TV PROG
RECORD
PAUSE
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
NUMBER
SP/LP
TV PROG
PLAY
PAUSE
STOP
RECORD
EN 21
Recording Features
Record One Programme While Watching Another
If your recorder is connected to the TV via AV connection, . . .
. . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.
SELECT CHANNEL TO WATCH
1
Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.
The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape.
If a decoder is connected to the recorder (Z pg. 46), you can select a scrambled channel as well with the TV channel controls.
Elapsed Recording Time Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1
Press – –:– – until a counter reading appears on the display panel.
RESET COUNTER
2
Press 0000 before starting recording or playback.
The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.
Tape Remaining Time
DISPLAY REMAINING TIME
1
Press – –:– – until the time remaining on the tape appears.
The display panel shows the tape remaining time with " " displayed.
By pressing the – –:– – button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.
* channel position is not displayed during playback.
NOTE:
Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "– –:– –" may sometimes appear, or the display may blink on occasion.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.
START RECORDING
1
Press RECORD on the recorder.
ENGAGE ITR MODE
2
Press RECORD again. " " blinks and 0:30 appears on
the front display panel.
SET RECORDING DURATION
3
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the recorder's front panel.
TV PROG
RECORD
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
TV PROG
TV/VCR
– –:– –
0000
22 EN
RECORDING (cont.)
Retake
You can cut out unnecessary parts of a TV programme while you're recording it.
ENGAGE RECORD-PAUSE MODE
1
Press PAUSE during recording.
LOCATE START POINT
2
Hold down REW or FF and release it when you reach
the point where you want to resume recording. * Your recorder returns to the Record-Pause mode.
RESUME RECORDING
3
Press PLAY when you wish to resume recording.
End of programme
Programme
Beginning of programme
Programme
Recorded part
Go back to end of programme to cut out unnecessary part
Unnecessary part
Unnecessary part
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
REW
PLAY
AUDIO
FF
PAUSE
NOTE:
Retake function does not work during Direct Rec (Z pg. 11).
EN 23
Receiving Stereo And Bilingual Programmes
Y our recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.
To Record Stereo And Bilingual Programmes (A2)
Stereo programmes are automatically recorded in stereo on the Hi-Fi audio track (with the normal audio track recording mixed L and R channel sound).
Bilingual programmes are automatically recorded in bilingual on the Hi-Fi audio track. The main soundtrack will be recorded on the normal audio track.
Type of Broadcast
On-screen Display
Being Received
A2 Stereo ST A2 Bilingual BIL Regular Monaural (none) NICAM Stereo ST NICAM NICAM Bilingual BIL NICAM NICAM Monaural NICAM
To Record NICAM Stereo And Bilingual Programmes
The NICAM audio programme will be recorded on the Hi-Fi audio track, and the Standard audio programme on the normal audio track.
NOTES:
If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a bilingual programme, refer to "Soundtrack Selection" (Z pg. 17).
To listen to a stereo programme, press AUDIO until " " and " " appear on the front display panel or "HIFI L R" appears on the screen.
To listen to a bilingual programme, press AUDIO until " " or " " appears on the front display panel, or "HIFI L " or "HIFI R" appears on the screen (as required).
To listen to the Standard (regular monaural) audio while receiving a NICAM broadcast, press AUDIO until "NORM" appears on the front display panel or on the screen.
NOTE:
"O.S.D." must be set to "ON" or the on-screen displays will not appear (Z pg. 9).
Hi-Fi Audio Recording Level Control
Your recorder allows manual adjustment of the Hi-Fi audio recording level.
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS HI-FI REC LEVEL CONTROL SCREEN
2
Press %fi to move the highlight bar (pointer) to “REC LEVEL CTL”, then press OK or #.
ADJUST AUDIO RECORDING LEVEL
3
Press % or .
Press % or briefly 5 times to move the on-screen's audio levels by one division on the scale. To move the audio levels faster , keep % or pressed.
Adjust the recording level while watching the recorder's audio level meters. Set the level so that maximum volume causes the meters to vary between 0dB to 4dB.
RETURN TO NORMAL SCREEN
4
Press MENU.
NOTES:
Noise will increase if the recording level is too low, while distortion will increase if the level is too high.
When you finished Hi-Fi Audio recording, be sure to set the level control back to its centre position.
HI-FI REC LEVEL CONTROL
MIN
+
MAX
[
5
]
[MENU] : EXIT
24 EN
B.E.S.T. Picture System
The B.E.S.T. (Biconditional Equalised Signal Tracking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “ON”.
Preparation
Turn on the TV and select the VIDEO channel (or AV mode).
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU SCREEN
2
Press MENU.
ACCESS MODE SET SCREEN
3
Press %fi to move the
highlight bar (pointer) to "MODE SET", then press OK or #.
SELECT B.E.S.T. MODE
4
Press %fi to move the
highlight bar (pointer) to "B.E.S.T.", then press OK or
#
to set to "ON" or "OFF".
RETURN TO NORMAL SCREEN
5
Press MENU.
MAIN MENU
MODE SET
AUTO CH SET MANUAL CH SET INITIAL SET REC LEVEL CTL
[
5
] =
[MENU] : EXIT
MODE SET
B. E. S. T . ON
PICTURE CONTROL AUTO AUTO TIMER OFF O. S. D. ON DIRECT REC ON AUTO SP=LP TIMER OFF POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
RECORD
PLAY
PAUSE
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
PAUSE
RECORD
PLAY
RECORDING (cont.)
EN 25
Recording
START RECORDING
1
Press and hold RECORD and press PLAY on the remote,
or press RECORD on the recorder.
DURING B.E.S.T.
B.E.S.T. COMPLETE
The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.
NOTES:
The B.E.S.T. system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.
The B.E.S.T. system does not work while Auto Satellite Prog recording is in progress (Z pg. 32).
In the case of timer recording, the B.E.S.T. system works before recording is initiated.
Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re­performed.
Pressing the recorder's RECORD button while "BEST" is displayed does not start Instant Timer Recording (Z pg. 21).
Playback
The recorder assesses the quality of the tape once you initiate playback.
START PLAYBACK
1
Press PLAY.
The recorder adjusts the playback picture quality based on the quality of the tape in use.
B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel.
NOTES:
When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.
When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 1 through 5 on page 24.
"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.
ATTENTION
Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:
1) Press and hold PAUSE and press RECORD to engage the RECORD PAUSE mode.
The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re­enters RECORD PAUSE.
2) Press PLAY to start recording.
If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 4 on page 24.
26 EN
ACCESS SHOWVIEW SCREEN
1
Press PROG.
The front display panel looks like this:
ENTER SHOWVIEW NUMBER
2
Press the NUMBER keys to
enter the SHOWVIEW number of a programme you wish to record, then press OK.
If you make a mistake, press and input the correct number .
The SHOWVIEW number you enter appears on the front
display panel:
The display panel can show only a 4-digit number.
ACCESS SHOWVIEW PROGRAM SCREEN
3
The SHOWVIEW Program
screen appears (if you’re just starting out, “P1” appears).
The display panel shows the programme start time. Pressing changes the display to the programme stop time, then the date and channel position.
IMPORTANT
Make sure the channel position number you wish to record is displayed; if not, see "SHOWVIEW Setup" on page 58 and set the Guide Program number for that SHOWVIEW number correctly.
If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid SHOWVIEW number.
If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 27.
SP
SHOWVIEW Timer Programming
Before performing SHOWVIEW Timer Programming:
Make sure that the recorder's built-in clock is set properly.
Insert a cassette with the safety tab in place. The recorder will come on automatically.
Turn on the TV and select the VIDEO channel (or A V mode).
With SHOWVIEW, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.
TIMER RECORDING
SHOWVIEW
[0 – 9] : SHOWVIEW [
+/–
] : EXPRESS PROGRAMING
[PROG] : EXIT
SHOWVIEW
12345678
[0 – 9] = [ ] : DELETE [PROG] : EXIT
– P1 –
SHOWVIEW 123456789
START STOP 21:00 = 22:00
SP VPS/PDC OFF
DATE TV PROG
25.12 1 ARD
: OK
ACCESS SHOWVIEW DISPLAY
1
Press LCD PROG. The LCD panel looks like this:
ENTER SHOWVIEW NUMBER
2
Press the NUMBER keys to enter the SHOWVIEW number of a programme you wish to record, then press .
If you make a mistake, press and input the correct number .
The SHOWVIEW number you enter appears on the LCD panel:
Then go to step 3 in the right column.
You can use the remote control with LCD panel to enter the SHOWVIEW number.
LCD panel
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
NUMBER
PROG
OK
LCD PROG
EN 27
SET TAPE SPEED
4
Press SP/LP ( ) to set the tape speed.
SET VPS/PDC MODE
5
Press VPS/PDC to select "ON" or "OFF".
If "VPS/PDC ON" is displayed on the screen or "VPS/
PDC" is lit on the display panel, VPS/PDC is set to ON.
If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
is not lit on the display panel, VPS/PDC is set to OFF.
Z "VPS/PDC Recording" on page 29.
RETURN TO NORMAL SCREEN
6
Press PROG or OK. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen appears.
Repeat steps 16 for each additional programme.
ENGAGE RECORDER’S TIMER MODE
7
Press (TIMER). The recorder turns off automatically
and appears on the display panel.
To disengage the timer, press (TIMER) again.
NOTES:
To Change The Stop Time . . . . . . press STOP +/– in step 3. You can compensate for anticipated programme schedule delays this way.
To Timer-Record Weekly Or Daily Serials . . . . . . in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.
Y ou can programme this recorder to timer -record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. T o record the extra programme, you must first cancel any unnecessary programmes (Z pg. 30).
It is not possible to timer-record a TV programme with a S
HOWVIEW
number which starts with "0".
ATTENTION
Regarding Guide Program Number Set
"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.
Press the NUMBER keys or %fi to input the channel position number on which your recorder receives that station, then press OK or # to set the Guide Program number. The SHOWVIEW program screen appears.
(Ex.) To timer-record a ZDF programme with SHOWVIEW. * If your recorder receives
ZDF on the channel position 2, press OK or
#
after entering "2".
Satellite Tuner Users
To timer-record a satellite broadcast using SHOWVIEW:
1 Set "AV2 SELECT" to "AV2" (Z pg. 39). 2 Perform steps 17. 3 Set the satellite tuner to the appropriate channel before
the selected programme begins.
4 Leave the satellite tuner's power on.
GUIDE PROG SET
GUIDE PROG TV PROG
2 – –
[
5
] =
[PROG] : EXIT
Timer Warning
If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.
NOTES:
The warning only appears if you’re not in the Timer mode at that time.
If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.
The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .
– WARNING– TIMER RECORDING TO START SOON
[ ]
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
DAILY
WEEKLY
SP/LP
VPS/PDC
PROG
STOP+/–
28 EN
Express Timer Programming
TIMER RECORDING (cont.)
If you don’t know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.
ACCESS SHOWVIEW SCREEN
1
Press PROG.
ACCESS PROGRAMME SCREEN
2
Press START +/–. (If you’re
just starting out, “P1” appears.)
The front display panel looks like this:
ENTER PROGRAMME START TIME
3
Press START +/– to enter
the time you want recording to start.
Press and hold START +/– to move in 30-
minute increments, or press and release repeatedly to move 1 minute at a time.
The front display panel looks like this:
ENTER PROGRAMME STOP TIME
4
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
SP
SP
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set properly.
Insert a cassette with the safety tab in place. The recorder will come on automatically.
Turn on the TV and select the VIDEO channel (or A V mode).
– P1 –
START STOP
– –:– – = – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– – – –
[+/–] = [PROG] : EXIT
– P1 –
START STOP
21:00 = – –:– –
SP VPS/PDC OFF
DATE TV PROG
– –.– – – –
[+/–] = [PROG] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
DAILY
WEEKLY
VPS/PDC
PROG
STOP+/–
SP/LP
TV PROG+/–
DATE+/–
START+/–
EN 29
ENTER CHANNEL POSITION
6
Press TV PROG +/–.
SET TAPE SPEED
7
Press SP/LP ( ) to set the tape speed.
SET VPS/PDC MODE
8
Press VPS/PDC to select "ON" or "OFF".
If "VPS/PDC ON" is displayed on the screen or "VPS/ PDC" is lit on the display panel, VPS/PDC is set to ON.
If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
is not lit on the display panel, VPS/PDC is set to OFF.
Z "VPS/PDC Recording" in the right column.
RETURN TO NORMAL SCREEN
9
After confirming all information is correct, press PROG
or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears.
Repeat steps 19 for each additional programme.
ENGAGE RECORDER’S TIMER MODE
10
Press (TIMER). The recorder turns off automatically
and appears on the display panel.
To disengage the timer, press (TIMER) again.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.
SP
Satellite Tuner Users
To timer-record a satellite broadcast using Express Timer Programming:
1 Set "AV2 SELECT" to "AV2" (Z pg. 39). 2 Perform steps 110. Enter "L-2" for the channel
position in step 6.
3 Set the satellite tuner to the appropriate channel before
the selected programme begins.
4 Leave the satellite tuner's power on.
NOTE:
Y ou can programme this recorder to timer -record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. T o record the extra programme, you must first cancel any unnecessary programmes (Z pg. 30).
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times you may have preset into the timer . This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.
NOTES:
When you use Express Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.
VPS/PDC recording is also possible when a satellite tuner or a cable system is connected to AV2 IN/DECODER on your recorder.
VPS/PDC recording is also possible via the AV1 IN/OUT connector.
How to check if the station being received transmits a VPS/PDC signal
1 Press – –:– – until the channel position appears on the
display panel.
2 Hold down START+ for about 5 seconds.
"VPS/PDC" appears blinking on the display panel.
If a VPS/PDC signal is detected from the station
, "VPS/
PDC" will stop blinking.
If no VPS/PDC signal is detected from the station
, "VPS/
PDC" will blink at a slower rate.
3 Press – –:– – or START+ again to return to normal display.
– P1 –
START STOP
21:00 = 22:00
SP VPS/PDC OFF
DATE TV PROG
25.12 1
ARD
[+/–] = [PROG] : EXIT
Timer Warning
If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.
NOTES:
The warning only appears if you’re not in the Timer mode at that time.
If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.
The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .
– WARNING– TIMER RECORDING TO START SOON
[ ]
30 EN
Check, Cancel And Replace Programmes
DISENGAGE TIMER MODE
1
Press (TIMER), then press .
ACCESS PROGRAM CHECK SCREEN/DISPLAY
2
Press .
ACCESS PROGRAM SCREEN/ DISPLAY
3
Press again to check
more information. Each time you press , the next programme's information appears.
The display panel shows the programme start time. Pressing OK changes the display to the programme stop time, then the date and the channel position.
SP
To cancel or replace a programme...
CANCEL OR REPLACE A PROGRAMME
4
Press to cancel a programme. To replace a
programme, press the appropriate button: START+/–, STOP+/–, DATE+/–, TV PROG+/–, VPS/PDC, SP/LP ( ).
RETURN TO NORMAL SCREEN/ DISPLAY
5
Press as many times as necessary. If there are still
some programmes remaining, go on to step 6.
RETURN TO TIMER MODE
6
Press (TIMER).
NOTE:
You can also check the programmes on the display panel even if the recorder's power is off (unless the recorder is in the Power Save mode Z pg. 10) or the recorder is in the Timer mode; however, it is not possible to cancel or replace the programmes.
TIMER RECORDING (cont.)
PR START STOP CH DATE 1 8:00 10:00 3 24.12 2 10:00 10:45 2 25.12 3 11:30 13:00 1 25.12 4 5 6 7 8
[
] : NEXT
– P1 –
START STOP
8:00 = 10:00
SP VPS/PDC OFF
DATE TV PROG
24.12 3
WDR
[
] : NEXT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
VPS/PDC
PROG
STOP+/–
SP/LP
TV PROG+/–
DATE+/–
START+/–
EN 31
Auto SP→LP Timer
If, when timer-recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode to allow complete recording.
For Example . . .
Recording a programme of 210 minutes in length onto a 180­minute tape
NOTES:
If you have programmed the recorder to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set "AUTO SP→LP TIMER" to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.
In order to ensure that the recording fits on the tape, this feature may leave a slight non-recorded section at the end of the tape.
There may be some noise and sound disturbance at the point on the tape where the recorder switches from SP to LP mode.
The Auto SP→LP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly with any tapes longer than E-180 or with some tapes of shorter lengths.
If you perform timer recording with both VPS/PDC and the Auto SP→LP Timer activated, and the programme goes beyond its originally scheduled length, there may be times when the programme cannot be recorded in its entirety.
Total 210 minutes
Approximately 150 minutes Approximately 60 minutes
SP mode LP mode
Make sure you set "AUTO SPLP TIMER" to "ON" at the Mode Set screen before the timer-recording starts.
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS MODE SET SCREEN
2
Press %fi to move the highlight bar (pointer) to "MODE
SET", then press OK or #.
SELECT MODE
3
Press %fi to move the
highlight bar (pointer) to "AUTO SPLP TIMER", then press OK or # to select "ON".
RETURN TO NORMAL SCREEN
4
Press MENU.
MODE SET
B. E. S. T . ON PICTURE CONTROL AUTO AUTO TIMER OFF O. S. D. ON DIRECT REC ON
AUTO SP=LP TIMER ON
POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
1 2 3 4 5 6 7 8 9
2
3
4
1
2
3
4
0
OK
MENU
Auto Timer
When the Auto Timer is set to ON the timer is automatically engaged when the recorder power is turned off and automati­cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS MODE SET SCREEN
2
Press %fi to move the
highlight bar (pointer) to "MODE SET", then press OK or #.
SELECT MODE
3
Press %fi to move the
highlight bar (pointer) to "AUTO TIMER", then press OK or # to select either "ON" or "OFF".
RETURN TO NORMAL SCREEN
4
Press MENU.
NOTE:
For safety, when Auto timer is set to "OFF", all other recorder functions are disabled while the Timer mode is engaged. To disengage the timer, press ‰ (TIMER).
MODE SET
B. E. S. T. ON PICTURE CONTROL AUTO
AUTO TIMER ON
O. S. D. ON DIRECT REC ON AUTO SP=LP TIMER OFF POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
MAIN MENU
MODE SET
AUTO CH SET MANUAL CH SET INITIAL SET REC LEVEL CTL
T
[
5
] =
[MENU] : EXIT
32 EN
This facility allows you record automatically a satellite programme which is timer-programmed on your external satellite tuner. Connect a satellite tuner to the recorder's AV2 IN/DECODER connector (Z pg. 44, 45) and programme the timer on the satellite tuner; the recorder starts recording when the signals input from the satellite tuner to the A V2 IN/DECODER connector, and when there is no input signals the recorder stops recording and the power shuts off.
Automatic Satellite Programme Recording
ATTENTION
Be sure not to turn on the satellite tuner before the programme is executed; otherwise, the recorder will start recording when the satellite tuner's power is turned on.
If you have connected another appliance other than a satellite tuner to the AV2 IN/DECODER connector, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the recorder will start recording when the connected appliance's power is turned on.
Auto Satellite Prog recording and timer-recording cannot be done at the same time.
Before performing the following steps:
Make sure the satellite tuner is connected to the recorder's AV2 IN/DECODER connector. (Z pg. 44, 45)
Programme the timer on the satellite tuner.
Insert a cassette with the safety tab in place.
SELECT AV2 SELECT MODE
1
Set "AV2 SELECT" to "AV2" (Z pg. 39).
When you select "SAT", refer to "IMPORTANT" on page 44.
SET TAPE SPEED
2
Press SP/LP ( ) to set the tape speed.
ENGAGE AUTO SATELLITE PROG REC MODE
3
Press and hold REC LINK on the recorder for about 2
seconds. The button lights up and the recorder turns off automatically.
To disengage the Auto Satellite Prog Rec mode, press REC LINK. The button's light goes off.
If the recorder's power is off, it is not possible to engage the Auto Satellite Prog Rec mode.
NOTES:
Auto Satellite Prog recording is possible with the AV2 IN/DECODER connector only. (Z pg. 44, 45)
For timer programming of the satellite tuner, refer to the instruction manual of the satellite tuner.
Auto Satellite Prog recording is not possible if your satellite tuner does not have a timer.
The button's light blinks while Auto Satellite Prog recording is in progress.
Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengage the Auto Satellite Prog Rec mode.
If there are more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set the different tape speed per each; the tape speed selected in step 2 will be applicable to all the programmes for Auto Satellite Prog recording.
The B.E.S.T. system (Z pg. 24) does not work while Auto Satellite Prog recording is in progress.
Just Clock (Z pg. 56) does not work when the Auto Satellite Prog Rec mode is engaged.
Depending on the type of satellite tuner , the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.
If you engage the Auto Satellite Prog Recording mode when the satellite tuner's power is on, the recorder will not start Auto Satellite Prog recording even though the button's light blinks. When the satellite tuner shuts off once and is turned back on again, the recorder starts recording.
When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON".
After Auto Satellite Programme recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function (Z pg. 17).
You can also record a programme from your cable system in the same way if the system has a timer.
When you press and hold the recorder's REC LINK button to engage the Auto Satellite Prog Rec mode, if the button does not light but instead blinks quickly even though your satellite tuner's power is off, Auto Satellite Prog Recording will not work properly with that satellite tuner*. If this is the case, perform "Express Timer Programming" (Z pg. 28) to timer-record a satellite programme.
* Some satellite tuners output signals even if the power is off. Auto Satellite Prog Recording is not possible with those satellite tuners.
REC LINK
TIMER RECORDING (cont.)
EN 33
Remote A/B Code Switching
The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.
REMOVE POWER SUPPLY
1
Unplug the mains power cord from the mains outlet.
SET REMOTE CONTROL CODE
2
Press and hold VCR on the remote control for over 2
seconds, press the NUMBER key "2" and then press OK.
RE-SUPPLY POWER
3
Plug the mains power cord back into the mains outlet.
TURN THE RECORDER ON
4
Press on the remote control. The recorder will now
only respond to B code signals.
NOTE:
To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.
SPECIAL FEATURES
Remote Control Functions
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
VCR
NUMBER "1"
NUMBER "2"
OK
34 EN
SPECIAL FEATURES (cont.)
SET TV BRAND CODE
1
Refer to the chart below. Press and hold TV on the
recorder's remote control for over 2 seconds, enter your TV’s brand code using the NUMBER keys, then press OK. Check if the TV's power goes on as it should. If it does, try other operations (Z step 2).
Once you have set the remote control to operate the TV, you don't have to repeat this step until you replace your remote control's battteries.
JVC or SAMSUNG has more than one code. If the TV does not function with one code, try entering another.
OPERATE TV
2
First, press TV to set the remote control to TV mode, then
press the corresponding button: , TV PROG +/–, TV/VCR, TV +/– (Volume), (Muting), NUMBER keys.
For some brands of TV, you must press OK after having pressed the NUMBER keys.
IMPORTANT
Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.
TV Multi-brand Remote Control
Y our remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled.
Before you start . . .
Turn off the TV using its remote control.
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
TV/VCR
NUMBER
OK
TV
+/–
TV PROG+/–
TV
Control Your TV Using Additional Buttons
Use the NUMBER keys, and the button, button or button to select the TV’s channel.
With televisions under Code 01, 02, 07, 10, 11, 14, 20, 23, 24, 25, 27, 33 or 35, the button corresponds to the 1-digit/2-digit entry switching button (often labelled – /– –) of your TV’s remote control.
With televisions under Code 01, 28, 29 or 34, the button corresponds to the 10 + button, and the button corre­sponds to the 20 + button of your TV’s remote control.
NOTE:
The way these buttons are used is determined by your TV. Use these buttons as instructed for your TV’s remote control.
TV BRAND NAME CODE
JVC 01, 23, 24, 25 BLAUPUNKT 19 BRANDT 26 FERGUSON 27 FINLUX 30 FUNAI 32 LG/GOLDSTAR 18 GRAETZ 28 GRUNDIG 19 HITACHI 10 ITT 28 LUXOR 28 MITSUBISHI 03 MIVAR 29 NEC 20 NOKIA 31 NORDMENDE 26 PANASONIC 1 1 PHILIPS 02 SABA 26 SALORA 28 SAMSUNG 02, 12, 33, 34, 35 SELECO 28 SHARP 06 SONY 07 TELEAVIA 26 TELEFUNKEN 26 THOMSON 26 TOSHIBA 14
EN 35
Satellite Tuner Multi-Brand Remote Control
Y our remote control can operate the basic functions of your satellite tuner set. In addition to JVC satellite tuners, other manufacturer’s satellite tuners can also be controlled.
Before you start . . .
Turn off the satellite tuner using its remote control.
SET SATELLITE TUNER BRAND CODE
1
Refer to the chart below . Press and hold CABLE/SAT on
the recorder's remote control for over 2 seconds, enter your satellite tuner’s brand code using the NUMBER keys, then press OK. Check if the satellite tuner's power goes on as it should. If it does, try other operations (Z step 2).
Once you have set the remote control to operate the satellite tuner, you don't have to repeat this step until you replace your remote control's battteries.
Some satellite tuner brands have more than one code. If the satellite tuner does not function with one code, try entering another.
OPERATE SATELLITE TUNER
2
First, press CABLE/SAT to set the remote control to
satellite tuner mode, then press the corresponding button: , TV PROG +/–, NUMBER keys.
For VIDEOWAY or some brands of satellite tuner, you must press after having pressed the NUMBER keys.
The NUMBER buttons may not function with some satellite tuners.
IMPORTANT
Although the provided remote control unit is compatible with JVC satellite tuners, as well as many other models, it may not work with your satellite tuner, or in some instances, may have limited function capability.
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
CABLE/SAT
NUMBER
TV PROG+/–
OK
SATELLITE TUNER BRAND CODE
JVC 72, 73 AMSTRAD 60, 61, 62, 63 BT 72 CANAL + 81 FINLUX 68 GRUNDIG 64, 65 HIRSCHMANN 64 ITT 68 JERROLD 75 KATHREIN 70, 71 LUXOR 68 MASPRO 70 NOKIA 68 PACE 65, 67 PANASONIC 74 PHILIPS 66 RFT 69 SALORA 68 SIEMENS 64 SKYMASTER 69 VIDEOWAY 76 WISI 64
36 EN
EDITING
Edit From A Camcorder
You can use a camcorder as the source player and your video recorder as the recorder.
MAKE CONNECTIONS
1
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/VIDEO input connectors.
When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder.
When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder’s instruction manual for operating procedure.
SET RECORDER’S INPUT MODE
2
Press NUMBER key “0” and/or TV PROG so that “F-1”
appears in place of a channel position number.
SET EDIT MODE
3
See "Picture Control" on page 16.
START CAMCORDER
4
Engage its Play mode.
START RECORDER
5
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
You can also use another video recorder as the player instead of a camcorder.
When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
TV PROG
NUMBER "0"
Mini-Plug Cable (not provided) (JVC camcorder only)
Recorder
To rear panel PAUSE connector
AUDIO OUT
Audio/Video Cable (not provided)
VIDEO OUT
EDIT
Camcorder
Player
VIDEO input
AUDIO input
EN 37
The Synchro Editing function synchronizes the start of the playback and recording operations when starting an edit operation using a camcorder with LANC connector and your video recorder.
Synchro Editing
MAKE CONNECTIONS
1
Connect your recorder to camcorder (Z pg. 36), and
connect your recorder's SYNCHRO EDIT connector to the camcorder's LANC connector.
SET RECORDER'S INPUT MODE
2
Press NUMBER key “0” and/or TV PROG so that “F-1”
appears in place of a channel position number.
SET EDIT MODE
3
See "Picture Control" on page 16.
LOCATE START POINT
4
Start playback of the tape in the camcorder, and pause
playback when you find the point where you want to start editing. Press and hold PAUSE and press RECORD on your recorder so that the recorder enters the Record­Pause Mode.
START SYNCHRO EDITING
5
Press SYNCHRO EDIT.
PAUSE SYNCHRO EDITING
6
Press SYNCHRO EDIT again.
Repeat steps 4 – 6 as necessary.
NOTES:
The Synchro Editing function may not work with the initial part of a camcorder tape.
The Synchro Editing function cannot be used when using the JLIP function. (Pressing SYNCHRO EDIT cancels the JLIP function.)
The Synchro Editing function may not work properly with some type of camcorder.
When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO
OUT
JLIP
SYNCHRO EDIT
LANC Cable (not provided)
Camcorder
Recorder
SYNCHRO EDIT connector
Player
To LANC connector
SYNCHRO EDIT
RECORD
PAUSE
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
TV PROG
NUMBER "0"
38 EN
NOTES:
All necessary cables can be obtained from your dealer.
When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (Z pg. 9).
When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.
Edit To Or From Another Video Recorder
You can use your video recorder as the source player or as the recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on page 39.
A
When Using Your Video Recorder As The Source Player ...
... connect its AV1 IN/OUT connector to the recording deck.
BWhen Using Your Video Recorder As The Recording
Deck ...
... connect its AV2 IN/DECODER or AV1 IN/OUT connector to the source player.
SET RECORDING DECK’S INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select “L-1” for the AV1 IN/ OUT connector, or “L-2” for the AV2 IN/DECODER connector, depending on the connector being used.
When using the AV2 IN/DECODER connector, make sure "AV2 SELECT" is set to "AV2" (Z pg. 39).
SET EDIT MODE
3
See "Picture Control" on page 16.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
EDITING (cont.)
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
TV PROG
NUMBER "0"
EN 39
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO OUT
JLIP
SYNCHRO EDIT
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO OUT
JLIP
SYNCHRO EDIT
Another recorder
RF Cable (provided)
Another recorder
Recorder
21-pin SCART Cable (not provided)
Player Your recorder Recorder Your recorderTV Receiver
TV Receiver
RF Cable (provided)
21-pin SCART Cable (not provided)
Player
VIDEO CHAN­NEL or AV mode
VIDEO CHANNEL or AV mode
A
B
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO AUTO TIMER OFF O. S. D. ON DIRECT REC ON AUTO SP=LP TIMER OFF POWER SAVE OFF NEXT PAGE
[5∞] = [MENU] : EXIT
AV2 SELECT Setting
Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN/DECODER connector of this recorder.
1 Press MENU to access the Main Menu screen. 2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
#
.
3 Press %fi to move the highlight bar (pointer) to "AV2 SELECT". 4 Press OK or
#
to select "AV2", "DECODER" or "SAT".
a–AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector, or to use the satellite tuner connected to the AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector. c–SAT : T o view a satellite programme with the TV set while the recorder is in Timer
mode, in Stop mode, recording or turned off. (Z pg. 44)
5 Press MENU to return to normal screen.
If you have a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2 SELECT" back to "DECODER" after editing.
If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT" set to "AV2".
The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder , "A V2" will be automatically selected when the power is restored to the recorder. If you are using a decoder, be sure to set "AV2 SELECT" back to "DECODER".
PREVIOUS PAGE
AV2 SELECT AV2
COLOUR SYSTEM PAL/NTSC TIME SCAN AUDIO ON
[5∞] = [MENU] : EXIT
40 EN
TV PROG
JOG
PAUSE
TIME SCAN SHUTTLE
Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.
Insert Editing
MAKE CONNECTIONS
1
Connect the player's VIDEO OUT and AUDIO OUT
connectors to your recorder's VIDEO and AUDIO input connectors on the front panel.
SET INPUT MODE
2
Press NUMBER key "0" and/or TV PROG so that "F-1"
appears in place of a channel number.
LOCATE END POINT
3
Load the recording cassette into your recorder , and play
it back to determine the edit-out point (the end of the segment to be replaced) using the TIME SCAN SHUTTLE ring or the JOG dial or pressing
@ #
and PAUSE.
RESET THE COUNTER
4
Press 0000 to change the counter display to "0:00:00".
LOCATE START POINT
5
Determine the edit-in point (the beginning of the
segment to be replaced) using the TIME SCAN SHUTTLE ring or the JOG dial or pressing
@ #
and PAUSE.
Be sure to engage the Still mode at the edit-in point.
Before insert editing
After insert editing
Source tape
Recorded tape
Recorder Your recorder
Player
Audio/Video signal
Another recorder
Video/Hi-Fi audio track
Normal Audio track
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
PAUSE
TV PROG
NUMBER "0"
0000
EDITING (cont.)
EN 41
ENGAGE INSERT EDITING
6
Press INSERT.
Your recorder enters the Insert-Pause mode. (" ", " " and " " light up on the front display panel.)
The TV screen changes from the still picture to the input source you are going to record.
START EDITING
7
Load the source cassette and play back the segment that
is to be inserted. When you reach the start of the section of the source tape that you wish to insert, press PLAY to start the tape in your recorder; Insert Editing begins at this point.
" " and " " are displayed on the front display panel.
END INSERT EDITING
8
At counter "0:00:00", Insert Editing will stop automati-
cally while the tape continues running in the Play mode. If you wish to stop Insert Editing before the specified edit-out point, press 0000.
FOR AV INSERT EDITING
If you want to replace the picture, Hi-Fi audio soundtrack and normal audio soundtrack all at the same time... ...
In step 6 above, after you press INSERT, press A. DUB also. (" " and " " blink and " " lights up on the front display panel.)
NOTES:
Suitable leads can be obtained from your dealer.
Insert editing is not possible with cassettes whose safety tab
has been removed.
When insert editing is performed on a tape that has been
recorded on another video recorder, the inserted portion may
appear distorted.
In insert editing, the recording speed (SP/LP) is determined by
the previous recording to be replaced. If the previous
recording's speed changes within a single edit, the inserted
picture will be distorted at the switching point.
A small portion of the recording which precedes an insert edit
may become erased.
Insert Editing is also possible using the rear panel AV1 IN/
OUT or AV2 IN/DECODER connector. When using these
connectors, make sure to select the correct input mode in step
2.
PLAY
INSERT
A. DUB
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
0000
PLAY
42 EN
PLAY
TV PROG
STOP
PAUSE
A. DUB
Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack.
Audio Dubbing
Original sound AUDIO OUT
Audio mixer
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO L + R
connectors on the recorder's front panel.
When connecting monaural equipment, use only the recorder's AUDIO L connector.
SET INPUT MODE
2
Press NUMBER key "0" and/or TV PROG so that "F-1"
appears in place of a channel number.
LOCATE START POINT
3
Press PLAY to start playback of the tape in your
recorder, and press PAUSE when you find the point where you want to start dubbing.
ENGAGE AUDIO DUBBING
4
Press A. DUB.
Your recorder enters the Audio Dubbing Pause mode. (" " blinks, " " and " " light up on the front display panel.)
To perform audio dubbing with audio mixing, press AUDIO on the remote control to select " + (L+R)" at this point. * Audio dubbing with audio mixing is not possible if
you're using a monaural audio component, or if you don't have an audio mixer.
START DUBBING
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your recorder. Audio dubbing begins at this point.
" " blinks and " " is displayed on the front display panel.
To stop dubbing temporarily, press PAUSE. Press PLAY to resume dubbing.
END AUDIO DUBBING
6
Press STOP to stop the tape in your recorder, and
engage the audio component's Stop mode.
Audio-dubbed tape
CD Player etc.
Mixer output
Pre-recorded tape
Normal audio track
Video/Hi-Fi audio track
NOTES:
When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the mixed sound (Hi-Fi + Normal soundtracks), press AUDIO on the remote control to select " + (L+R)+NORM" (Z pg. 17).
Audio dubbing stops automatically when the counter reaches "0:00:00", and the recorder enters the Play mode. Check the counter reading before dubbing.
Audio dubbing is also possible using the rear panel A V1 IN/OUT or AV2 IN/DECODER connector. When using these connectors, make sure to select the correct input mode in step 2.
Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.
When playing back an audio-dubbed tape, press AUDIO on the remote control to select the soundtrack you wish to hear (Z pg. 17).
CD Player etc.
EDITING (cont.)
EN 43
INFORMATION ON J TERMINAL
J Terminal (JLIP(Joint Level Interface Protocol) Connector)
The J Terminal is used to connect the recorder to a personal computer or similar device to allow computerized control of the recorder during editing and certain other operations.
Examples:
With the optional JLIP VIDEO CAPTURE BOX GV-CB3E:
Enables Random Assemble Editing of up to 99 segments, using this recorder as the playback unit.
Allows you to capture still images from the recorder into a personal computer.
For further details consult your nearest JVC dealer.
JLIP ID Number
Your recorder has its own JLIP ID number. This ID number must be unique when your recorder is connected to another device via its J terminal. The ID Number is preset to "1" at the factory. You can change this number to any number between "1" and "99". If it is necessary to change the JLIP ID number perform the following steps.
J terminal
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS INITIAL SET SCREEN
2
Press %fi to move the highlight bar (pointer) to
"INITIAL SET", then press OK or #.
ACCESS JLIP ID NO. SET SCREEN
3
Press %fi and move the
highlight bar (pointer) to "JLIP ID NO. SET", then press OK or #.
SET JLIP ID NUMBER
4
Press NUMBER keys to
enter the desired ID number.
RETURN TO NORMAL SCREEN
5
Press OK.
JLIP ID NO. SET
1
CLOCK SET
[0-9] = [MENU] : EXIT
INTIAL SET
CLOCK SET GUIDE PROG SET
JLIP ID NO. SET
[
5
] =
[MENU] : EXIT
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO OUT
JLIP
SYNCHRO EDIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
NUMBER
OK
MENU
44 EN
SYSTEM CONNECTIONS
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO
OUT
JLIP
SYNCHRO EDIT
DECODER VCR TV
Connection To A Satellite Tuner
If you don't have a decoder
. . .
Connect the satellite tuner to the video recorder's AV2 IN/ DECODER connector, then connect the recorder's AV1 IN/OUT connector to the TV's 21-pin SCART connector.
NOTES:
Set "AV2 SELECT" to "AV2". (Z pg. 39)
You can use Automatic Satellite Program Recording function (Z pg. 32) with this connection.
T o view a programme via the satellite tuner, select L-2 mode by pressing NUMBER keys and/or TV PROG so that "L-2" appears on the display panel.
For details, refer to the instruction manual for the satellite tuner.
Mains outlet
TV Aerial cable
Aerial connector
Satellite Tuner Unit
Satellite Cable
Outdoor Unit
Aerial
Back of TV
21-pin AV input connector (SCART)
RF OUT
ANT. IN
Back of Recorder
IMPORTANT
When you set "AV2 SELECT" to "SAT" (Z pg. 39), it is possible to view a satellite broadcast with the TV set to its AV mode even if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR indicator on the display panel.
EN 45
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO
OUT
JLIP
SYNCHRO EDIT
DECODER VCR TV
EXT.2 EXT.1
If you have a decoder . . .
Connect the decoder to the satellite tuner's connector, AV1 IN/ OUT connector to TV's connector, and AV2 IN/DECODER connector to the satellite tuner's connector. Then connect the satellite tuner and TV.
Mains outlet
TV Aerial cable
Aerial connector
Satellite Tuner Unit
Satellite Cable
Outdoor Unit
Aerial
Back of TV
21-pin AV input connector (SCART)
RF OUT
ANT. IN
Back of Recorder
Decoder
NOTES:
Set "AV2 SELECT" to "AV2". (Z pg. 39)
You can use Automatic Satellite Program Recording function (Z pg. 32) with this connection.
To view a programme via the satellite tuner, select L-2 mode by pressing NUMBER keys and/or TV PROG so that "L-2" appears on the display panel.
To receive a scrambled broadcast, descramble the signal with the satellite tuner.
For details, refer to the instruction manual for the satellite tuner and decoder.
46 EN
The AV2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels.
SELECT INPUT MODE
1
Set "AV2 SELECT" to "DECODER". (Z pg. 39)
CONNECT DECODER
2
Connect your recorder's AV2 IN/DECODER connector
to the decoder's Euroconnector using a 21-pin SCART cable.
SET TUNER
3
Perform the procedure as described in "When Receiving
A Scrambled Broadcast" on page 51.
Connecting/ Using A Decoder
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO OUT
JLIP
SYNCHRO EDIT
TV Receiver
TV Aerial Cable
RF Cable (provided)
AV1 IN/OUT
Decoder
AV2 IN/DECODER
SYSTEM CONNECTIONS (cont.)
EN 47
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO
OUT
JLIP
SYNCHRO EDIT
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Connecting/ Using A Stereo System
These instructions enable you to connect your video recorder to your Hi-Fi stereo system (if you have one) and listen to the soundtrack through the stereo.
Television
Speaker Speaker
AUDIO OUT
FM Tuner
CD Player
Stereo Amplifier
AUX IN or TAPE MONITOR
Audio Cable (not provided)
Mains outlet
Rear View
MAKE CONNECTIONS
1
Connect the AUDIO OUT L and R connectors on your
video recorder to the AUX IN or TAPE MONITOR terminals on your stereo system’s receiver or amplifier.
NOTES:
When connecting your recorder’s audio output connectors to a stereo amplifier, make sure you connect L and R correctly.
If stereo or bilingual TV broadcasts are receivable in your area, this recorder can record them independently of the TV set and play them back through the connected stereo system.
When listening to sound through the connected stereo system, turn the TV’s volume down completely.
CAUTIONS:
This recorder has a dynamic range of more than 80 dB with regards to its Hi-Fi audio capability. It is recommended that you check the maximum level if you are going to listen to the Hi-Fi audio signals through a stereo amplifier. A sudden surge in the input level to the speakers may damage them.
Some speakers and televisions are specially shielded to prevent television interference. If both are of the non-shielded type, do not place the speakers adjacent to the TV set as this can adversely affect the video playback picture.
48 EN
SUBSIDIARY SETTINGS
Tuner Set
IMPORTANT
Perform the following steps only if — — Auto Channel Set has not been set correctly by Auto Set
Up function or by Preset Download (Z pg. 4, 6).
— you have moved to a different area or if a new station
starts broadcasting in your area.
Turn on the TV and select the VIDEO channel (or AV mode).
Your recorder needs to memorize all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the TV PROG buttons without going through any vacant channel.
TURN ON THE RECORDER
1
Press .
ACCESS MAIN MENU SCREEN
2
Press MENU.
ACCESS AUTO CH SET SCREEN
3
Press
%
to move the highlight bar (pointer) to "AUTO CH SET", then press OK or #.
SELECT COUNTRY
4
Press
%
to move the highlight bar (pointer) to your country's name, then press OK or #.
SELECT LANGUAGE
5
Press
%
to move the highlight bar (pointer) to the language of your choice.
Auto Channel Set
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET INITIAL SET REC LEVEL CTL
[
5
] =
[MENU] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
TV PROG
EN 49
PERFORM AUTO CHANNEL SET
6
Press OK twice.
You can set up the
recorder's tuner also by Preset Download (Z pg. 6).
The Auto Set screen
appears, and remains on screen while the recorder searches for receivable stations. As Auto Channel Set progresses, the " " mark on the screen moves from left to right. Wait until the screen as shown in step 7 appears.
VIEW CONFIRMATION SCREEN
7
After "SCAN COMPLETED"
is displayed on the screen for about 5 seconds, the Confirmation screen looking like the one to the right appears. The stations your recorder located appear on a Confirmation screen — channel positions (PR), channels (CH) and station names (ID – Z pg. 53). The blueback screen and the programme currently being broadcast by the blinking station appear alternately for 8 seconds each. To view the next page, use the %fi
@ #
button on the
remote control.
The stations located in the selected country appear at
the top of the list.
The Guide Program numbers will also be set
automatically during Auto Channel Set.
RETURN TO NORMAL SCREEN
8
Press MENU.
Using the Confirmation screen, you can skip or add
channel positions, enter station names and perform other operations. Refer to pages 50 – 54 for the procedures.
Depending on reception conditions, the stations may
not be stored in order, and the station names may not be stored correctly.
For information on scrambled broadcasts, refer to
page 51.
IMPORTANT
In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly . If the Guide Program numbers are not set properly , when you timer-record a TV programme using SHOWVIEW, the recorder will record a TV programme of a different station. When programming the timer using SHOWVIEW, be sure to check whether the channel position on which your recorder receives the broadcasting station you wish to record is selected (Z pg. 26, "SHOWVIEW Timer Programming").
Your video recorder memorizes all detected stations even if reception of some of them is poor . In these cases picture quality may be poor. To delete those stations with an unacceptable picture Z "Delete A Channel" on page 51.
NOTES:
Fine tuning is performed automatically during Auto Channel Set. If you want to perform it manually, refer to page 54.
If you perform Auto Channel Set when the aerial cable is not connected properly, "SCAN COMPLETED -NO SIGNAL-" appears on the screen in step 7. When this happens, make sure of the aerial connection and press OK; Auto Channel Set will take place again.
C: Cable
0
+++
End
Beginning
AUTO SET
PLEASE WAIT
[MENU] : EXIT
PR CH ID PR CH ID
01 25 ARD 08 C26 E-SP
02 C08 SKY1 09 55 WEST 03 10 ZDF 10 C24 SAT1 04 C65 RAI1 11 C23 OSF 05 C31 BBC1 12
– – – –
06 C32 BBC2 13
– – – –
07 C33 3SAT 14
– – – –
[
5
]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
50 EN
SUBSIDIARY SETTINGS (cont.)
ATTENTION
Guide Program numbers are not set when channels are stored manually. If an attempt is made at timer program­ming with SHOWVIEW in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen. Z “ATTENTION – Regarding Guide Program Number Set” on pg. 27. Or perform “Guide Program Number Set” (Z pg. 58).
Storing Channels Manually
Store channels that were not stored during Auto Set Up (Z pg. 4), Preset Download (Z pg. 6) or Auto Channel Set (Z pg. 48).
SELECT BAND
4
Press
%
to change the band between CH (regular) and CC (cable), then press #.
INPUT CHANNEL
5
Press the NUMBER keys to input the channel number you
want to store.
Input "0" before any single number entries.
To input the registered station name (ID – Z pg. 53),
press # until "----" (ID setting) begins blinking, then press
%
.
For fine tuning adjustment, press # until "+/–" begins
blinking, then press
%
. While tuning, “+” or “–”
appears.
When storing a channel that sends scrambled
broadcasts, press # until "OFF" (Decoder setting) blinks, then press %fi to set "DECODER" to "ON" ("OFF" is the default setting).
When "AV2 SELECT" is set to "AV2", the "DECODER"
setting cannot be changed (Z pg. 39).
ENTER NEW CHANNEL INFORMATION
6
Press OK and the Confirmation screen appears.
Repeat steps 3 through 6 as necessary.
CLOSE CONFIRMATION SCREEN
7
Press MENU.
To change positions, see "Change Station Channel
Position" (Z pg. 51).
If you wish to set station names other than the ones
registered in your recorder, Z "Set Stations (B)" on page 52.
The blueback screen and the programme currently being broadcast by the selected channel appear alternately for 8 seconds each.
The blueback screen and the programme currently being broadcast by the selected channel appear alternately for 8 seconds each.
ACCESS MAIN MENU
1
Press MENU.
ACCESS CONFIRMATION SCREEN
2
Press %fi to move the highlight bar (pointer) to “MANUAL CH SET”, then press OK or #. The Confir­mation screen appears.
SELECT POSITION
3
Press
%
@ #
until an open position in which you want to store a channel begins blinking, then press OK. The Manual Channel Set screen appears.
(Ex.) To store in position 12.
PR CH ID PR CH ID 01 25 ARD 08 C26 E-SP 02 CDB SKY1 09 55 WEST 03 10 ZDF 10 C24 SAT1 04 C65 RAI1 11 C23 OSF
05 C31 BBC1 12
– – – –
06 C32 BBC2 13
– – – –
07 C33 3SAT 14
– – – –
[
5
]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
PR CH ID FINE DECODER
12 CH01
– – – –
+/– OFF
[
5
] : SELECT
[
] : CURSOR +=
: OK
[MENU] : EXIT
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
NUMBER
OK
MENU
EN 51
Perform steps 1 and 2 of "Storing Channels Manually" on page 50 to access the Confirmation screen before continuing.
Change Station Channel Position
SELECT ITEM
1
Press
%
@ #
until the item you want to move begins blinking. Then press OK and the station name (ID) and its channel (CH) number begin blinking.
SELECT NEW POSITION
2
Press
%
@ #
to move the station to the new channel position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions 2 and 3 each move down one space.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
SELECT ITEM
1
Press
%
@ #
until the item you want to delete begins blinking.
DELETE CHANNEL
2
Press .
The item directly beneath the cancelled one moves
up one line.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Delete A Channel
Perform steps 1 and 2 of "Storing Channels Manually" on page 50 to access the Confirmation screen before continuing.
SELECT DECODER MODE
1
Set "AV2 SELECT" to "DECODER" (Z pg. 39).
ACCESS CONFIRMATION SCREEN
2
Perform steps 1 and 2 of "Storing Channel Manually" on
page 50.
SELECT POSITION
3
Press
%
@ #
to select the channel position broadcast-
ing scrambled programmes, then press OK twice.
CHANGE DECODER SETTING
4
Press # until "OFF" (decoder setting) begins blinking,
and set it to "ON" by pressing
%
.
RETURN TO CONFIRMATION SCREEN
5
Press OK.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
When Receiving A Scrambled Broadcast
PR CH ID PR CH ID 01 25 ARD 08 C26 E-SP 02 C08 SKY1 09 55 WEST 03 10 ZDF 10 C24 SAT1
04 C65 RAI1 11 C23 OSF
05 C31 BBC1 12 C25 ESPN 06 C32 BBC2 13
– – – –
07 C33 3SAT 14
– – – –
[
5
] : MOVE
: MANUAL CH SET
[MENU] : EXIT
PR CH ID PR CH ID 01 25 ARD 08 C26 E-SP
02 C65 RAI1 09 55 WEST
03 C08 SKY1 10 C24 SAT1 04 10 ZDF 11 C23 OSF 05 C31 BBC1 12 C25 ESPN 06 C32 BBC2 13
– – – –
07 C33 3SAT 14
– – – –
[
5
] : MOVE =
[MENU] : EXIT
ATTENTION
If channel positions are changed or deleted, the Guide Program numbers that have been set are reset.
Example 1:If a channel is deleted, all the Guide Program numbers are reset.
Example 2:If a channel is changed from position 4 to position 2, the Guide Program numbers above position 4 are reset.
Example 3:If a channel is changed from position 4 to position 6, the Guide Program numbers above position 6 are reset.
* In Examples 2 and 3, if the channel is moved to position
10 before OK is pressed, the Guide Program numbers above position 10 are reset. If an attempt is made at timer programming with SHOWVIEW in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen.
Z “ATTENTION – Regarding Guide Program Number
Set” on pg. 27. Or perform “Guide Program Number Set” (Z pg. 58).
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –, *, +, (space) (maximum of 4).
52 EN
SUBSIDIARY SETTINGS (cont.)
SELECT STATION NAME CHARACTER
1
Press # until the first letter
of the station name begins blinking.
ENTER NEW CHARACTER
2
Press %fi to cycle through the characters (A–Z, 0–9, –,
*
, +, (space) ) and stop when the desired character
is indicated, then press
#
to enter. Enter the remaining characters the same way (maximum of 4). After entering all characters, press OK.
The Confirmation screen appears.
If you make a mistake, press @ until the incorrect
character begins blinking. Then enter the correct character by pressing %fi.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Set Stations (B)
Perform steps 1 and 2 of "Storing Channels Manually" on page 50 to access the Confirmation screen before continuing.
SELECT ITEM
1
Press %fi
@ #
until the item you want begins blinking.
ACCESS MANUAL CHANNEL SET SCREEN
2
Press OK twice.
SELECT NEW STATION
3
Press # until the station name (ID) begins blinking, then press %fi until the new station’s name (ID) you want to store begins blinking. Registered station names (Z pg. 53) appear as you press %fi.
SWITCH STATIONS
4
Press OK.
The Confirmation screen appears.
Repeat steps 1 through 4 as necessary.
CLOSE CONFIRMATION SCREEN
5
Press MENU.
Set Stations (A)
Set station names that are registered in your recorder.
Perform steps 1 and 2 of "Storing Channels Manually" on page 50 to access the Confirmation screen and then perform step 1 and 2 of "Set Stations (A)" on the left before continuing.
Set station names other than the ones registered in your recorder.
PR CH ID FINE DECODER
06 CH45
– – – –
+/– OFF
[
5
] : CHANGE ID
[
] : CURSOR +=
: OK
[MENU] : EXIT
PR CH ID FINE DECODER
06 CH45 ARD +/– OFF
[
5
] : A-Z, 0-9
[
] : CURSOR +=
: OK
[MENU] : EXIT
EN 53
TV Station And ID List
ID* STATION NAME
1000 TV1000 3SAT 3SAT ADLT ADULT ANT3 ANTENA3 ARD ARD ARTE ARTE BBC BBC GROUP BBC1 BBC1 BBC2 BBC2 BR3 BAYERN3 C+ CANAL PLUS C1 PORTUGUSES CAN5 CANALE5 CANV KETNET CANVAS CH4 CHANNEL4 CH5 CHANNEL5 CHLD CHILD CINE CINEMA CLUB TELECLUB CMT CMT CNN CNN CSUR ANDALUCIA DISC DISCOVERY DR DR TV DRS DRS DSF DSF ETB1 ETB1 ETB2 ETB2 EURO EURONEWS EUSP EUROSPORTS FEMM FEMMAN FILM FILM FNET FILMNET FR2 France2 FR3 France3 GALA GALAVISION HR3 HESSEN3 INFO INFO-KANAL ITA1 ITALIA1 ITA7 ITALIA7 ITV ITV JSTV JSTV KA2 KA2 KAB1 KABEL1 KAN2 KANAL2 LOCA LOCAL M6 M6 MBC MBR MCM MCM MDR MDR MOVE MOVIE MTV MTV MTV3 MTV3 N3 NORD3 N-TV N-TV NBC NBC SUPER NDR3 NDR3 NED1 NED1 NED2 NED2 NED3 NED3 NEWS NICK NICKELODEON NRK NRK NRK2 NRK2 ODE ODEON ORF1 ORF1
ID* STATION NAME
ORF2 ORF2 ORF3 ORF3 OWL3 OWL3 PREM PREMIERE PRO7 PRO7 RAI1 RAI1 RAI2 RAI2 RAI3 RAI3 RET4 RETE4 21 TELE21 RTBF RTBF1 or 2 RTL RTL RTL2 RTL2 RTL4 RTL4 RTL5 RTL5 RTP RTP S4 SCHWEIZ4 SAT1 SAT1 SBS SBS SHOW SHOW SIC SOCIEDADE SKY SKY CHANNEL SKYN SKY NEWS SPRT SPORT SRTL SUPER RTL STAR ST AR-TV SVT1 SVT1 SVT2 SVT2 SWR SUEDWEST3 TCC TCC TELE TELE TEL5 TELE5 TF1 TF1 TM3 TM3 TMC TELEMONTECARLO TNT TNT INT TRT TRT INT TSI TSI TSR TSR TV1 BRTN TV1 TV2 TV2 TV3 TV3 TV4 TV4 TV5 TV5 TV6 TV6 TVE1 TVE1 TVE2 TVE2 TVG TV GALICIA TVI TV INDEPENDENT TVN TV NORGE VCR VIDEO VERO VERONICA VH-1 VH-1 VIVA VIVA VIV2 VIVA2 VMTV VIDEO MUSIC VOX VOX VT4 VT4 VTM VTM WDR1 West1 WDR3 West3 YLE1 YLE1 YLE2 YLE2 ZDF ZDF ZTV ZTV
* The "ID" abbreviation is what is shown on-screen in lieu of the
station name. The "ID" abbreviation is listed in the Confirma­tion screen and is displayed on the TV screen when the recorder is tuned to a different station.
54 EN
SUBSIDIARY SETTINGS (cont.)
Perform steps 1 and 2 of "Storing Channels Manually" on page 50 to access the Confirmation screen before continuing.
SELECT CHANNEL TO FINE-TUNE
1
Press
%
@ #
until the channel you want to tune begins
blinking.
ACCESS MANUAL CHANNEL SET SCREEN
2
Press OK twice. The Manual Channel Set screen
appears.
PERFORM TUNING
3
Press # until "+/–" begins blinking, then press
%
until
the picture is its clearest. Then press OK.
The Confirmation screen appears.
Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION SCREEN
4
Press MENU.
Fine-Tuning Channels Already Stored
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
EN 55
Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.
If you have connected the video recorder to your TV via both the provided RF cable and a 21-pin SCART cable (AV connection), since you do not need the video channel you have to set the video channel to off.
If you have connected the video recorder to your TV via the RF cable only (RF connection), you have to set the correct video channel.
Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.
ACCESS VIDEO CHANNEL SET MODE
1
Hold down STOP (5/8) on the recorder until the
display panel shows the following.
SET RF OUTPUT SYSTEM
2
The blinking number on the display indicates the RF
output system of your country. If you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting (pg. 4, 8), press
%
to set to "2". For other countries, set to "1". Then press OK. (1: B/G 2: D/K)
SET VIDEO CHANNEL
3
With AV Connection
Press TV PROG – until the display panel shows
"1OUT
– –
" (or "2OUT
– –
").
Now the video channel is set to off.
With RF Connection
Press TV PROG + or – to set the video recorder to a
vacant channel between 22 and 69 which is not occupied by any local station in your area.
(Ex.) If channel 50 is available in your area
With AV Connection: To view picture signals from the video recorder, set your TV to its AV mode.
With RF Connection: The channel on which the screen in step 3 appears clearly is your video channel. To view picture signals from the video recorder, set your TV to the Video Channel.
Then set your TV to UHF channel 50.
If the two vertical white bars appear clearly on the screen as shown to the right, go to step 4.
If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.
NOTES:
If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.
If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.
EXIT VIDEO CHANNEL SET MODE
4
Press OK on the remote control.
IMPORTANT
Perform the following steps only if — — interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in
your area.
— you change the connection between your recorder and TV from RF connection to AV connection, or vice versa.
Video Channel Set
56 EN
Just Clock
The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "OFF"). Press OK until the Just Clock setting begins blinking, then press %fi to change the setting.
IMPORTANT: If you turn off Just Clock, the accuracy of your recorder's built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to "OFF".
TURN THE RECORDER ON
1
Press .
ACCESS MAIN MENU SCREEN
2
Press MENU.
ACCESS INITIAL SET SCREEN
3
Move the highlight bar (pointer) to "INITIAL SET" by pressing %fi, then press OK or #.
ACCESS CLOCK SET SCREEN
4
Move the highlight bar (pointer) to "CLOCK SET" by pressing %fi, then press OK or #. The Clock Set screen appears.
NOTE:
When you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting (Z pg. 4,
8), you cannot use Just Clock function. Skip steps 6 and
7 on page 57.
SET DATE AND TIME
5
Press %fi to set the time, then press OK or #. The "date" display begins blinking. Repeat the same procedure to set the date and year.
When you set the time, press and hold %fi to change the time by 30 minutes.
When you set the date, press and hold %fi to change the date by 15 days.
Clock Set
Turn on the TV and select the VIDEO channel (or AV mode).
IMPORTANT
If you performed Auto Set Up (Z pg. 4), Preset Download (Z pg. 6) or Auto Channel Set (Z pg. 48), without ever having set the clock previously, the recorder's built-in clock is also set automatically. Perform the following steps only if — — Auto Clock Set has not been performed correctly by
Auto Set Up, Preset Download or Auto Channel Set.
or
— the recorder's memory backup has expired.
or
— you want to change Just Clock setting (Z "Just Clock"
in the left column).
CLOCK SET
TIME DATE YEAR 0: 00 01 . 01 99
JUST CLOCK : OFF TV PR. : 1
[
5
] =
[MENU] : EXIT
INTIAL SET
CLOCK SET
GUIDE PROG SET JLIP ID NO. SET
[
5
] =
[MENU] : EXIT
SUBSIDIARY SETTINGS (cont.)
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
EN 57
NOTES:
Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
Just Clock is not effective when . . . – the recorder’s power is on. – the recorder is in the Timer mode. – a difference of more than 3 minutes exists between the
built-in clock’s time and the actual time.
– the recorder is in the Auto Satellite Prog Rec mode
(Z pg. 32).
– the recorder is in the Power Save mode (Z pg. 10).
If Just Clock is set to "ON", the recorder’s clock is automati­cally adjusted at the start/end of Summer Time.
Just Clock may not function properly depending on the reception condition.
SET JUST CLOCK
6
The default setting is “OFF”. Set as desired by pressing
%fi, then press OK or #.
For the Just clock function, Z "Just Clock" on page 56.
If you set to “OFF”, you can disregard the next step as
you won’t be able to receive regular clock adjustments.
SET CLOCK DATA SOURCE CHANNEL POSITION
7
The recorder is preset to receive clock setting and
adjustment data from channel position 1. Press %fi to set the channel position to the number representing the station transmitting clock setting data, then press OK or #.
START CLOCK OPERATION
8
Press MENU.
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
OK
MENU
58 EN
SHOWVIEW Setup
IMPORTANT
Normally, Auto Set Up (Z pg. 4), Preset Download (Z pg. 6) or Auto Channel Set (Z pg. 48) sets the Guide Program Numbers automatically . You need to set the Guide Program Numbers manually only in the following cases.
When timer-programming with S
HOWVIEW
, the channel position, where the station you wish to record is received on your
recorder, is not selected or when you add a channel after Auto Set Up or Auto Channel Set has taken place.
— Set the Guide Program Number for that station manually.
When you delete a channel or change channel positions manually after Auto Set Up or Auto Channel Set has taken place.
— Set the Guide Program Numbers for all the receivable stations manually.
When you wish to timer-record a satellite programme with S
HOWVIEW
.
— Set the Guide Program Numbers for all satellite broadcasts received on your satellite tuner.
Turn on the TV and select the VIDEO channel (or AV mode).
Guide Program Number Set
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS INITIAL SET SCREEN
2
Press
%
to move the highlight bar (pointer) to
"INITIAL SET", then press OK or #.
ACCESS GUIDE PROG SET SCREEN
3
Press
%
to move the highlight bar (pointer) to "GUIDE
PROG SET", then press OK or #.
ENTER GUIDE PROG NUMBER
4
Press
%
or NUMBER keys to enter the Guide Program number for the desired station as shown in the TV listings. Then press OK or #.
(Ex.) When inputting the
Guide Program number 2 for ZDF.
ENTER RECEIVING CHANNEL POSITION NUMBER
5
Press
%
or NUMBER keys to input the number of the recorder's channel position on which the Guide Program number's broadcast is received. Then press OK or #.
If the satellite broadcast
is received on your recorder's auxiliary channel "L-2", select "L-2" for the channel position.
Repeat steps 4 and 5 as necessary.
RETURN TO NORMAL SCREEN
6
Press MENU.
(Ex.) If ZDF is received on
channel position 2.
Guide Program Number
"Guide Program (GUIDE PROG) number" refers to the assigned TV station numbers, according to broadcast area, for SHOWVIEW timer recording. The Guide Program numbers can be found in most TV listings.
GUIDE PROG SET
GUIDE PROG TV PROG
25
[
5
] =
[MENU] : EXIT
GUIDE PROG SET
GUIDE PROG TV PROG
22
ZDF
[
5
] =
[MENU] : EXIT
SUBSIDIARY SETTINGS (cont.)
EN 59
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair.
POSSIBLE CAUSE
The mains power cord is discon­nected.
“ is displayed on the display panel with Auto Timer set to "OFF".
The batteries are discharged.
SYMPTOM
1. No power is applied to the recorder.
2. The clock is functioning properly, but the recorder cannot be powered.
3. The remote control won't function.
CORRECTIVE ACTION
Connect the mains power cord.
Press the button to turn the ““ indicator off.
Replace the dead batteries with new ones.
SYMPTOM
1. The tape does not run during recording.
2. The tape will not rewind or fast­forward.
CORRECTIVE ACTION
Press PLAY to turn the “ “ indicator off.
Check the cassette.
SYMPTOM
1. The playback picture does not appear while the tape is running.
2. Noise appears during visual search.
3. Noise appears during normal playback.
4. The playback picture is blurred or interrupted while TV broadcasts are clear.
5. Breaks are noticeable in Hi-Fi soundtrack.
POSSIBLE CAUSE
If you’re using the RF OUT connec­tion . . . . . . the TV receiver’s channel selector is not set to the VIDEO channel. . . . the recorder's VIDEO channel has not been correctly set.
If you’re using the AV connection, the TV receiver is not set to the A V mode.
This is normal during visual search other than TimeScan.
The automatic tracking mode is engaged.
The video heads may be dirty.
Automatic tracking is engaged.
CORRECTIVE ACTION
If you are using the RF OUT connec­tion . . . . . . set the TV receiver to the VIDEO channel. . . . perform "Video Channel Set". (Z pg. 55) If you are using the AV connection, set the TV to its AV mode.
Try manual tracking. (Z pg. 15)
Consult your JVC dealer.
Engage and adjust tracking manually. (Z pg. 15)
POSSIBLE CAUSE
“ “ is displayed on the display panel.
The tape is already fully rewound or fast-forwarded.
CORRECTIVE ACTION
Insert a cassette, or using adhesive tape, reseal the slot where the tab was removed.
Set to the desired channel.
Confirm that the source is properly connected.
Confirm that all units’ power switches are turned on. Set the input mode to “L-1”, “L-2” or “F-1”.
Confirm that the camcorder is properly connected.
Set the input mode to “L-1”, “L-2” or “F-1”.
POSSIBLE CAUSE
There is no cassette loaded, or the cassette loaded has had its Record Safety tab removed.
“L-1”, “L-2” or “F-1” has been selected as the input mode.
The source (another video recorder, camcorder) has not been properly connected.
All necessary power switches have not been turned on.
The input mode is not correct.
The camcorder has not been
properly connected.
The input mode is not correct.
SYMPTOM
1. Recording cannot be started.
2. TV broadcasts cannot be recorded.
3. Tape-to-tape editing is not possible.
4. Camcorder recording is not possible.
POWER
PLAYBACK
RECORDING
TAPE TRANSPORT
60 EN
CORRECTIVE ACTION
Re-perform the clock and/or timer settings. Press and confirm that ““ is displayed on the display panel.
Timer programming can’t be performed while a timer recording is in progress. Wait until it finishes.
Load a cassette with the Record Safety tab intact, or cover the hole using adhesive tape.
Remove the cassette and cover the hole with adhesive tape, or insert a cassette with the Record Safety tab intact.
Check the programmed data and re­program as necessary, then press again.
The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.
Refer to "Guide Program Number Set" and re-perform the procedure (Z pg. 58).
SYMPTOM
1. Timer recording won’t work.
2. Timer programming is not possible.
3. ““ and “]“ on the display panel won’t stop blinking.
4. The cassette is automatically ejected, and ““ and “]“ on the display panel won’t stop blinking.
5. ““ blinks for 10 seconds and the Timer mode is disengaged.
6. The cassette is automatically ejected, the power shuts off and ““ and “]“ won’t stop blinking.
7. SHOWVIEW does not timer-record properly.
POSSIBLE CAUSE
The clock and/or the timer have been set incorrectly.
The timer is not engaged.
Timer recording is in progress.
The timer is engaged but there’s no
cassette loaded.
The loaded cassette has had its Record Safety tab removed.
‰ has been pressed when there are no programs in memory, or the timer record information has been programmed incorrectly.
The end of the tape was reached during timer recording.
The recorder’s channel positions have been set incorrectly.
CORRECTIVE ACTION
Position the camcorder so its microphone is away from the TV. Turn the TV’s volume down.
If you need the skipped channels, restore them (Z pg. 50).
Press PAUSE to pause the recording, change channels, then press PLAY to resume recording.
Perform manual setting again.
Connect the TV aerial cable to the recorder properly and turn off the recorder power once, then turn the recorder power back on again. The recorder will try Auto Set Up again (Z pg. 4).
Re-set the remote control to the correct brand (Z pg. 34, 35).
SYMPTOM
1. Whistling or howling is heard from the TV during camcorder record­ing.
2. When scanning channels, some of them are skipped over.
3. The channel cannot be changed.
4. Channel settings that were made manually seem to have changed or disappeared.
5. No channels are stored in the recorder's memory.
6. The remote control won’t operate the TV or satellite tuner.
POSSIBLE CAUSE
The camcorder’s microphone is too close to the TV.
The TV’s volume is too high.
Those channels have been desig-
nated to be skipped.
Recording is in progress.
After the manual settings were
made, Auto Channel Set was performed.
The TV aerial cable was not connected to the recorder when Auto Set Up was performed.
The remote control brand setting is incorrect.
TIMER RECORDING
OTHER PROBLEMS
TROUBLESHOOTING (cont.)
EN 61
QUESTIONS AND ANSWERS
PLAYBACK
Q. What happens if the end of the tape is reached
during playback or search?
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
A. The tape is automatically rewound to the beginning.
Q. Can the video recorder indefinitely remain in the
still mode?
A. No. It stops automatically after 5 minutes to protect
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
the heads.
Q. When returning from multi-speed search to normal
playback, the picture is disturbed. Should I be concerned about this?
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
A. No, it is normal.
Q. Sometimes, during Index Search, the video recorder
can’t find the programme I want to see. Why not?
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
A. There may be index codes too close together.
RECORDING
Q. When I pause and then resume a recording, the end
of the recording before the pause is overlapped by the beginning of the continuation of recording. Why does this happen?
A. This is normal. It reduces distortion at the pause and
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
resume points.
Q. Can the video recorder indefinitely remain in the
Record-Pause mode?
A. No. The video recorder goes to its Stop mode
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
automatically after 5 minutes to protect the heads.
Q. What happens if the tape runs out during recording? A. The video recorder automatically rewinds it to the
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
beginning.
TIMER RECORDING
Q. " " and "" remain lit on the display panel. Is there
a problem?
A. No. This is a normal condition for a timer recording in
○○○○○○○○○○○○○○○○○○○○○○○○○○○
progress.
Q. Can I programme the timer while I’m watching a
tape or a TV broadcast?
A. You won’t see the picture as it is replaced by the on-
screen menu, but the audio from the programme or
○○○○○○○○○○○○○○○○○○○○○○○○○○○
tape you’re viewing can be heard.
Q. Is it possible to timer-record a TV programme
broadcast in 2000?
○○○○○○○○○○○○○○○○○○○○○○○○○○○
A. Yes, it is possible.
ATTENTION
This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the recorder off and unplug the mains power cord. Then plug it in again and turn the recorder on. Take out the cassette. After checking the cassette, operate the unit as usual.
62 EN
INDEX
FRONT VIEW
REW
FF
SHUTTLE
SYNCHRO EDIT
TIMER
STANDBY/ON
VIDEO
(MONO)
L –AUDIO– R
REC LINK
TV PROG
TV PROG
REVIEW
SP
VPS/PDC
VCR
+
8 4 0
6
15dB
NORM
S
L
O
W
S
L
O
W
INSERT
A.DUB
JOG
1 2 3
$
*&^%9 !0
4
5 6
7
#
8
@
1 STANDBY/ON Button Z pg. 4 2 TIMER Button Z pg. 27, 29 3 REVIEW Button Z pg. 17 4 Cassette Loading Slot 5 PLAY Button Z pg. 13 6 JOG Dial Z pg. 14 7 TIME SCAN SHUTTLE Ring Z pg. 13, 14, 18 8 VIDEO/AUDIO Input Connectors Z pg. 36, 40 9 TV PROG +/– Buttons Z pg. 20
0 REC LINK Button Z pg. 32 ! SYNCHRO EDIT Button Z pg. 37 @ Display Panel Z pg. 63 # Infrared Beam Receiving Window $ RECORD Button Z pg. 20 % PAUSE Button Z pg. 14 ^ INSERT Button Z pg. 40 & A. DUB [Audio Dubbing] Button Z pg. 42 * STOP/EJECT Button Z pg. 13
Attach the provided connector cover when you do not use the front panel connectors.
EN 63
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO
OUT
JLIP
SYNCHRO EDIT
2 5
6
8 9
1
7
4
3
REAR VIEW
DISPLAY PANEL
@!
09
#
$8
1 5 763 42
REVIEW
SP
VPS/PDC
VCR
+
8 4
0 6
15dB
NORM
5 ANT. IN Connector Z pg. 3 6 AV2 IN/DECODER Connector
Z pg. 38, 44 – 46
7 AUDIO OUT (L/R) Connectors Z pg. 47 8 Remote PAUSE Connector Z pg. 36 9 RF OUT Connector Z pg. 3
1 Mains Power Cord Z pg. 3 2 AV1 IN/OUT Connector
Z pg. 3, 37, 38, 44 – 46
3 J terminal [JLIP (Joint Level Interface Protocol)
Connector] Z pg. 43
4 SYNCHRO EDIT Connector Z pg. 37
1 B.E.S.T. Picture System Display Z pg. 24
Audio Level Indicator Z pg. 23
2 Programme Time Indicators Z pg. 28 3 Symbolic Mode Indicators
4 "Timer" Indicator Z pg. 27, 29 5 Channel/Clock Display Z pg. 7 6 Tape Speed Indicators Z pg. 20
* EP is only for NTSC playback
7 Instant REVIEW Indicator Z pg. 17 8 Audio Mode Indicator Z pg. 17 9 Tape Remaining Time Indicator Z pg. 21 0 "Cassette Loaded" Mark ! VPS/PDC Indicator Z pg. 27, 29 @ VCR Indicator Z pg. 21 # Counter/Remain Display $ Mode Display (L-1, L-2 or F-1)
STILL: SLOW:
RECORD: RECORD PAUSE:
PLAY: FF/REW VARIABLE SHUTTLE SEARCH:
AUDIO DUBBING: AUDIO DUBBING PAUSE: INSERT: INSERT PAUSE: AUDIO DUBBING INSERT: AUDIO DUBBING INSERT PAUSE:
64 EN
REMOTE CONTROL
1 2 3 4 5 6 7 8 9
1
2
3
4
1
2
3
4
VCR
TV
CABLE
/SAT
TV/VCR
– –:– –
AUDIO
0000
START
DEBUT
STOP
FIN
DATE
TV
PROG
DAILY/QTDN.
VPS/PDC
AUX
WEEKLY/HEBDO
EXPRESS
LCD PROG
ENTER/ENTREE
0
PROG
MENU
OK
30 SEC
T
V
P
R
O
G
+
T
V
P
R
O
G
T
V
T
V
+
W
q
T
3
9
7
2
!
4
0
#
% ^
* ( )
i
t
e
w
u
p
R
&
Y
1
5 6
8
@
Q
$
E
r
y
o
Buttons with a small dot on the left side of the name can also be used to operate your TV. ( Z pg. 34)
1 LCD Panel Z pg. 26, 65 2 TV Button Z pg. 34, 65 3 VCR Button Z pg. 33, 65 4 AUDIO Button Z pg. 17
(TV Muting) Button Z pg. 34
5 LCD PROG Button Z pg. 26 6 NUMBER Keys Z pg. 20, 26 7 DAILY Button Z pg. 27, 29 8 VPS/PDC Button Z pg. 27, 29 9 Button Z pg. 26, 30
0000 Button Z pg. 21, 41
0 Button Z pg. 30 ! PROG Button Z pg. 26 @ START +/– Button Z pg. 28 # STOP +/– Button Z pg. 28 $ Rewind [REW] Button Z pg. 13, 15 % Play Button Z pg. 13 ^ Record Button Z pg. 20 & %fi Button Z pg. 4
TV PROG +/– Z pg. 34
* CABLE/SAT Button Z pg. 35, 65 ( STANDBY/ON Button Z pg. 4 ) – – : – – Button Z pg. 21 q TV/VCR Button Z pg. 21, 34 w REVIEW Button Z pg. 17 e 30 SEC Button Z pg. 15 r WEEKLY Button Z pg. 27, 29
t Button Z pg. 26 y AUX Button Z pg. 36
u Button Z pg. 27, 29 i (Auto Tracking) Button Z pg. 15
SP/LP Button Z pg. 20
o OK Button Z pg. 5 p MENU Button Z pg. 8 Q TV PROG +/– Button Z pg. 20 W DATE +/– Button Z pg. 28 E Fast Forward [FF] Button Z pg. 13, 15 R Stop Button Z pg. 13, 20 T Pause Button Z pg. 14
Y
@ #
Button Z pg. 14, 18
TV +/–Button Z pg. 34
How To Use
The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets and satellite tuners of JVC and other brands. (Z pg. 34, 35)
Point the remote control toward the sensor window.
The maximum operating distance of the remote control is
about 8 m.
NOTES:
When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.
If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.
INDEX (cont.)
EN 65
Remote Control LCD
The remote control can operate not only the video recorder but also some of your TV and satellite tuner's functions. The LCD indicates which of these (VIDEO, TV or CABLE/SAT) the remote control can currently operate. When you first purchase the remote control, or after you have just replaced the batteries, VIDEO A (A code) is selected.
1 To operate your video recorder, first press the VCR button to set the remote
control to the Video mode (Z pg. 33).
2 To operate your TV, first press the TV button to set the remote control to the TV
mode (Z pg. 34).
3 To operate your satellite tuner, first press the CABLE/SAT button to set the
remote control to the Satellite tuner mode (Z pg. 35).
NOTES:
Even if “TV” is displayed on the LCD, the following operations can be performed without switching the mode.
Basic operations for the recorder After an operation is completed, “TV” reappears on the LCD.
Express Timer Programming and S
HOWVIEW
Timer Programming operations
To perform a TV operation again, switch to TV mode first.
Accessing main menu To perform a TV operation again, switch to TV mode first.
66 EN
SPECIFICATIONS
GENERAL
Power requirement : AC 220 – 240 V`, 50/60 Hz Power consumption
Power on : 22 W
Power off : 5.5 W Temperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 400 x 94 x 347 mm Weight : 4.1 kg Format : VHS PAL standard Maximum recording time
(SP) : 240 min. with E-240 video
cassette
(LP) : 480 min. with E-240 video
cassette
VIDEO/AUDIO
Signal system : PAL-type colour signal and CCIR
monochrome signal, 625 lines 50 fields
Recording system : DA4 (Double Azimuth) head
helical scan system Signal-to-noise ratio : 45 dB Horizontal resolution : 250 lines Frequency range : 70 Hz to 10,000 Hz
(Normal audio)
20 Hz to 20,000 Hz
(Hi-Fi audio) Input/Output : 21-pin scart connectors :
IN/OUT x 1, IN/DECODER x 1
RCA connectors:
VIDEO IN x 1, AUDIO IN x 1,
AUDIO OUT x 1
TUNER/TIMER
TV channel storage capacity : 99 positions
(+AUX position) Tuning system : Frequency synthesized tuner Channel coverage : VHF 47 – 89/104 – 300/
302 – 470MHz
UHF 470 – 862MHz Aerial output : UHF channels 22 – 69
(Adjustable) Memory backup time : Approx. 60 min.
ACCESSORIES
Provided accessories : RF cable,
Infrared remote control unit,
"R6" battery x 2
Specifications shown are for SP mode unless otherwise specified. E.& O.E. Design and specifications subject to change without notice.
EN 67
MEMO
HR-DD868EU
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
EU
Auto Set Up – referring to the display panel
The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.
BEFORE YOU START PLEASE MAKE SURE THAT:
n The TV aerial cable is connected to the ANT.IN jack on the rear panel of the video recorder. n The video recorder's mains power cord is connected to a mains outlet. n The video recorder is turned off. n Load batteries into the remote control.
1
Press (recorder/remote).
2
Press %fi (remote) to select the international telephone country code.
If you have selecte d a country code other than 32 (BELGIUM) or 41 (SUISSE), go to step 3.
If you have selected 36 (MAGYARORSZAG), 42 (CESKA REPUBLIKA), 48 (POLSKA) or EE (OTHER EASTERN
EUROPE), press OK. Clock Set screen will appear.
Set the clock manually (Z pg. 56 – 57), then go to step 3.
If you have selected 32 (BELGIUM) or 41 (SUISSE), press OK (remote) and select the language code by pressing %fi (remote), then
go to step 3.
(Ex.) DEUTSCHLAND is selected.
Language Code
ENGLISH : 01 NEDERLANDS : 06 DEUTSCH : 02 SVENSKA : 07 FRANCAIS : 03 NORSK : 08 ITALIANO : 04 SUOMI : 09 CASTELLANO : 05 DANSK : 10
Language Code
(Ex.) FRANCAIS is selected for BELGIUM
International Telephone Country Code
FOR MORE INFORMATION SEE INSTRUCTIONS/P4
EN
International Telephone Country Code
BELGIUM : 32 NORGE : 47
ESKÁ REPUBLIKA : 42 ÖSTERREICH : 43 DANMARK : 45 POLSKA : 48 DEUTSCHLAND : 49 PORTUGAL : 351 ESPAÑA : 34 SUISSE : 41 GREECE : 30 SUOMI : 358 ITALIA : 39 SVERIGE : 46 MAGYARORSZÁG : 36
OTHER WESTERN EUROPE
:- -
NEDERLAND : 31
OTHER EASTERN EUROPE
:EE
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Malaysia 0599IYV
*ID*
PJ1
3
Press OK (remote). "Auto" appears on the display panel.
4
Press OK (remote) to start Auto Set Up. Do NOT press any button on the video recorder or remote control during "Auto" is blinking.
If "– –:– –" appears on the display panel, see page 7 of the instructions.
*
Once you have performed Auto Set Up, even if the recorder's memory backup has expired, the recorder will not perform Auto Set Up again. Perform tuner setting (
Z
pg. 48) and/or clock setting (Z pg. 56) as required.
Loading...