BlackCrystal™ Series LED TV
User Manual
BC50R
50” Class
Before operating your LED TV, please read this manual thoroughly.
We Are Here To Help!
Before Returning the Product
Call Our Customer Service at
1-855-868 1928
We can help you with
x Damaged Package
x Missing Parts
x Technical Support
Contents
Congratulations on purchasing your new JVC TV. To get the most out of your JVC LED TV, read these
instructions before making any adjustments, and retain them for future reference.
For assistance, call the JVC Customer Support and Service Center 1-855-868-1928 or visit our website
http://go.jvc.com/HDTVSupport/
We recommend that you register your JVC LED TV either at our wesite http://go.jvc.com/HDTVSupport/
or ll out and mail the Product Registration Card on the back of the manual.
Retain your purchase receipt and write down the model and serial number located at the back of your
LED TV for easy reference when obtaining service support.
Serial Number:
Model Number:
This product qualies for ENERGY STAR in the
“factory default” setting and this is the setting in which
power savings will be achieved. Changing the factory
default picture setting or enabling other features will
increase power consumption that could exceed the
limits necessary to qualify for Energy Star rating.
®
HIGH-DEFINITION MULTIMEDIA INTERFACE
HDMI, the HDMI Logo, and High-Denition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
HE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS;
IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. JVC, THE JVC LOGO, AND OTHER
JVC TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF JVC KENWOOD Corporation.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Copyrights © 2012 AmTRAN Video Corporation. ALL RIGHTS RESERVED.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning ash with arrowhead symbol, within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electric
shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES
AWAY FROM THIS PRODUCT AT TIMES.
CAUTION:
TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient
or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect
the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult
the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance,
(example – use only shielded interface cables when connecting to computer or peripheral devices). Any
changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Responsible Party: AmTRAN Video Corporation
Address: 9 Goddard, Irvine, CA 92618 USA
Telephone No: 949-336-6633
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
2
Important Safety Instructions
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding-type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specied by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
ENGLISH
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15) Apparatus should not be exposed to dripping or splashing, and objects lled with liquids, such
as vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of re or electric
shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in re or electric shock. Never spill or spray any type
of liquid into the unit.
19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static
charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information
with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
20) When replacement parts are required, be sure the service technician uses replacement parts
specied by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in re, electric shock or other hazards.
21) Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.
3
Important Safety Instructions
22) When you connect the product to other equipment, turn o the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious
personal injury. Read the owner’s manual of the other equipment carefully and follow the
instructions when making any connections.
23) Sudden high volume sound may cause hearing or speaker damage. When you use
headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate
level. If you use headphones continuously with high volume sound, it may cause hearing
damage.
24) Do not allow the product to output distorted sound for an extended period of time. It may
cause speaker overheating and re.
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, species that the
cable ground shall be connected to the grounding system of the building, as close to the point
of cable entry as practical.
26) The socket-outlet must be installed near the unit and easily accessible.
CHILD SAFETY:
It Makes A Difference How and Where You Use TV
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger TVs are popular purchases. However, TVs are not
always supported on the proper stands or installed according to the manufacturer’s recommendations.
TVs that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and
cause injury.
THIS MANUFACTURER CARES !
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT t all. Follow the manufacturer’s recommendations for the safe installation and use of your TV.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place TVs on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” TV. Care should be
taken to place or install the display where it cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the TV so that they cannot be pulled or grabbed by curious
children.
4
Important Safety Instructions
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly. When this happens, unit’s
performance will be impaired. To prevent this, let the unit stand in its new surroundings for
about an hour before switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the unit is exposed to the breeze from an air
conditioner. In such cases, change the location of the unit.
HOW TO HANDLE THE LED PANEL
t Do not press hard or jolt the LED panel. It may cause the LED panel glass to break and injury may
occur.
t If the LED panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may
cause skin inammation.
t If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the
liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15
minutes or longer in clean water.
Possible Adverse Effects on LED Panel:
If a xed (non-moving) pattern remains on the LED Panel for long periods of time, the image can become
permanently engrained in the LED Panel and cause subtle but permanent ghost images. This type of
damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is
displaying the following formats or images:
t Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
ENGLISH
t Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9)
media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal
style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation.
t LED Panels are manufactured using an extremely high level of precision technology, however
sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a
sign of a malfunction.
t Do not install the TV near electronic equipment that produces electromagnetic waves. Some
equipment placed too near this unit may cause interference.
t Eect on infrared devices – There may be interference while using infrared devices such as
infrared cordless headphones.
5
Important Safety Instructions
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that
the antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements of the grounding electrode.
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
(NEC SECTION 810-21)
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused
for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable
system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such
power lines or circuits.
6
DTV Transition Advisory
Important Safety Instructions
As of June 12, 2009, all U.S. television stations have switched to digital broadcasting. As a result,
owners of analog television sets must connect a digital-to-analog converter box to the television
set or subscribe to cable or satellite TV to receive over-the-air TV. Analog-only TVs continue to
work as before to receive low power, Class A or translator television stations and with cable and
satellite TV services, gaming consoles, VCRs, DVD players, and similar products.
For more information about the DTV transition, visit
FCC’s Consumer Center
Email: dtvinfo@fcc.gov
Phone: 1-888-CALL-FCC (1-888-225-5322)
Fax: 1-866-418-0232; or writing to:
Mail: Federal Communications Commission
Consumer and Governmental Aairs Bureau
Consumer Inquiries and Complaints Division
445 12th Street, SW
Washington, DC 20554
www.dtv.gov.
ENGLISH
7
Contents
Contents
Contents ...................................................... 1
Important Safety Instructions ....................3
Television Antenna Connection Protection ... 6
External Television Antenna Grounding ....6
DTV Transition Advisory ........................................7
Contents ...................................................... 8
Attaching the Stand ..................................10
BC50R (50”) .........................................................10
Removing the Stand .............................................10
Package Contents ....................................11
Remote Control Batteries ........................11
Parts and Functions .................................12
Front Views ...............................................................12
Rear View ..................................................................12
Remote Control ......................................................13
Making Connections ................................14
Connecting Antenna / Cable .............................14
Connecting HD Devices ......................................14
HDMI .....................................................................14
Component .......................................................15
Composite .........................................................15
Connecting External Speakers / Soundbar / AV
Receivers ...................................................................16
Digital Connection ..........................................16
Analog Connection .........................................16
Connecting Music Port ........................................17
Basic Operations ......................................18
Setup Wizard ...........................................................18
Exit Retail Mode ................................................19
Basic TV Operation ................................................19
Changing Channel ...........................................19
Mute Volume .....................................................20
Set Sleep Timer .................................................20
Display Info.........................................................20
Set Aspect Ratio ...............................................20
Selecting Input Source ........................................21
Multimedia Mode ..................................................21
Playing Multimedia Files ...............................21
Audio Only Mode ...................................................22
Multimedia: Photo ...........................................22
Kensington Lock ....................................................23
Security Deterrent Kensington Lock ...............23
Wall Mount ...............................................................24
Installing Wall Mount ...........................................24
provided with the wall mount kit. ..................24
Wall Mount Specications (VESA) ....................24
Adjusting the Menu Settings ...................25
Quick Menu Operation ........................................25
Input Menu ..............................................................26
Picture Menu ...........................................................26
Picture Mode .....................................................26
Backlight .............................................................26
Contrast ...............................................................26
Brightness ...........................................................26
Color .....................................................................26
Tint ........................................................................27
Sharpness ...........................................................27
Size & Position ...................................................27
Color Temperature ...........................................27
Ambient Light Sensor.....................................27
Advanced Picture .............................................27
Reset Picture Mode .........................................27
Audio Menu .............................................................28
XinemaSound™ 3D ................................................28
XinemaSound™ Leveler .................................28
Bass .......................................................................28
Treble ....................................................................28
Balance ................................................................28
Lip Sync ...............................................................28
TV Speakers ........................................................28
Audio Only ..........................................................28
Digital Audio Out .............................................28
Analog Audio Out ............................................28
Equalizer Settings ............................................28
Reset Audio Mode ...........................................28
Setup Menu .............................................................29
Name Input ........................................................29
CEC Settings .......................................................29
Menu Language ...............................................29
Time & Local Settings .....................................30
Parental Control ................................................30
Setup Wizard ......................................................31
System Information .........................................31
Reset All Settings .............................................31
Closed Caption ............................................................
8
Closed Caption .......................................................32
Channel Menu ........................................................32
Select Antenna / Cable ..................................32
Scan Channels ...................................................32
Add Channel ......................................................33
Delete Channel .................................................33
Sleep Timer ..............................................................33
Appendix ...................................................34
Supported Resolution ..........................................34
Troubleshooting .......................................35
Speciſcations ...........................................36
Limited Warranty ......................................37
Product Registration ................................40
Contents
ENGLISH
9
Attaching the Stand
Removing the Stand
1 Place TV on at surface and the protective
bag. Screen face down.
Attach TV stand to rear of television with the
provided four (4) pan head screw.
2 Mount the base to the stand with the
provided three (3) at head screws
When the TV needs to be transported, remove
the stand and pack the TV back in the carton.
To remove the stand, perform the assemble
steps in reverse order according to your TV
model.
Carefully lift TV up
10
Package Contents
Check if the following items are included in your package.
LED TV
Quick Start Guide
Quick Start
Guide
Remote Control
SLEEP
MEDIA
N
E
U
M
I
N
T
F
U
O
P
N
I
OK
N
W
R
I
U
D
T
E
E
R
A
U
O
I
D
VOL CH
MUTE
1 2 3
4 5 6
7 8 9
_
ENT
0
HDMI PC TV
VIDEO COMP MUSIC
User Manual
User's Manual
Batteries
ENGLISH
Power Cord
Remote Control Batteries
1 Push the tab, then lift to open the cover.
2 Insert the batteries, making sure the [+] and
[-] polarities are correct.
3 Close the battery cover.
Battery Precautions:
Be sure to follow the correct polarity. Incorrect installation
may cause battery leakage or damage the remote control.
Always replace batteries in pair. Do not combine a used
battery with a new one.
Do not use dierent battery types together
(e.g. “Alk aline” and “Carbon-zinc”).
If the remote control is not to be used for a long period of
time, remove the batteries to prevent battery leakage.
11
Front Views
Parts and Functions
Remote control sensor
Rear View
1
Power indicator
t Power ON: White
2
1
AC power in
2
Wall mount holes
3
HDMI -1 (ARC) & HDMI-2
4
USB
7
HDMI
USB
HDMI
AUDIO OUT
OPTICAL
AUDIO OUT
OPTICAL
8
9
10
Component / Composite Video in
5
Component / Composite /
Music port Audio in
6
Antenna in
7
USB port
8
HDMI-3
9
Analog audio / headphone out
12
11
10
Digital optical audio out
11
Control Panel: Power / Channel up/down
/ Volume up/down / Input
6543
Parts and Functions
Remote Control
1 IR Transmitter: Sends remote control signal to
the TV.
2 SLEEP button: Select a sleep mode timer (O,
30 minutes, 60 minutes, 90 minutes, 120 minutes,
180 minutes).
3 Playback controls: The buttons are used for
Photo, Music, Video, and HDMI CEC function.
4 INPUT button: Change the input source.
5 WIDE button: Change the display mode
(Normal, Wide, Zoom Panoramic).
6 MUTE button: Turn the TV audio o or on.
7 VOL (Volume) buttons: Press VOL
increase volume or VOL
to decrease volume.
8 Number pad (0~9, –): Use the number keys to
directly change channel.
9 HDMI button: Press to directly set HDMI as the
input source signal.
10 VIDEO button: Press to directly set Composite
VIDEO as the input source signal.
11 COMP button: Press to directly set Component
as the input source signal.
12 Remote Control LED: Lights red when a
button is pressed.
13 POWER button: Turn the TV on or o.
14 MEDIA button: Enter USB media mode.
15 MENU button: Display the MENU screen.
16 INFO button: Display program information (if
available).
17 Direction buttons
/ / / :
Navigate the menu, select options, or adjust
settings value.
18 OK button: Enter a menu or conrm an option.
19 RETURN button: Return to a previous menu or
screen.
20 AUDIO button: Enter Audio Only mode and
turn the screen o. See page 24.
21 CH (Channel) buttons: Use CH
the channel number or CH
to decrease the
channel number.
22 ENT (Enter) button: Access the entered
channel number or display the Channel list screen.
23 TV button: Directly set TV as the input source
signal.
24 PC button: Directly set PC as the input source
signal. (function available for models with VGA
input)
25 MUSIC button: Directly set Music as the input
source signal.
to
to increase
1
2
3
4
5
6
7
SLEEP
N
E
U
M
T
U
P
N
I
OK
W
I
D
E
A
U
O
I
D
VOL CH
MUTE
MEDIA
I
N
E
R
F
O
N
R
U
T
12
13
14
15
16
17
18
19
20
21
1 2 3
8
4 5 6
7 8 9
_
9
10
11
Notes:
To obtain best results, use the remote control with a proper
distance from the TV and ensure that there are no obstacles
between them.
Aim the remote control transmitter to the remote control
sensor on the TV.
Do not expose the remote control to direct sunlight. This
may aect the performance of the remote control.
HDMI PC TV
VIDEO COMP MUSIC
ENT
0
22
23
24
25
ENGLISH
13
Making Connections
Connecting Antenna / Cable
Connect the 75 ohm coaxial cable directly to the DTV/TV Cable/Antenna jack of the TV.
DTV / TV
CABLE / ANTENNA
75 ohm coaxial cable
Connecting HD Devices
You can connect dierent devices to the TV using HDMI, DVI, Composite, or Component
connections. Check the type of connection available on your device.
HDMI
HDMI connection transmits both digital video and audio signals from an HDMI device to the TV.
Game Console / Blu-ray Player / Cable Box / Satellite
TV
HDMI
Video / Audio IN
HDMI cable
Note: The HDMI cable is not included with the TV.
HDMI
Video / Audio OUT
TM
14
O
Making Connections
Y
Component
Audio cable
Audio OUTAudio IN
Video OUT
Y/N
TV
Pr/CrPb/Cb
COMPONENT
L
AUDIO
R
Video IN
Component cable
Note: The component and audio cable are not included with the TV.
Composite
TV
VIDEO
VIDE
Y/V
AUDIO
L R
Audio IN
Audio OUT
R
AUDIO
L
Pr/Cr
Pb/Cb
Y
R
AUDIO
L
DVD Player / Cable Box / Satellite
VCR / Camcorder / Game Console
ENGLISH
VIDEO
Video IN
Video OUT
Video cable
Note:
t The video and audio cable are not included with the TV.
t When connecting to devices, the Video IN color may not match with the video cable.
15
Making Connections
Connecting External Speakers / Soundbar / AV Receivers
Digital Connection
Connect the SPDIF/Optical audio cable to the Audio OUT optical port of the TV and the optical
port of the soundbar, AV receiver, or audio system.
Digital Audio System
TV
AUDIO OUT
OPTICAL
Audio OUT
Optical audio cable
Audio IN
OPTICAL
Note:
t The optical audio cable is not included with the TV.
Analog Connection
Connect the audio cable to the Audio OUT L/R port of the TV and the port of the soundbar, AV receiver, or
audio system.
Analog connection
AUDIO OUT
AUDIO OUT
AUDIO
R
L
Note:
t The audio cable is not included with the TV.
16
Making Connections
Connecting Music Port
The TV supports music playback from portable music players, such as an MP3 player or iPodTM.
1 Connect one end of an audio cable to the Music Port (shared with component audio in) of
TV, then connect the other end to the Audio OUT port of the music player.
Connect to External Music PLayers
Music Port
COMPONENT/ VIDEO
V
Y
Audio OUT
Music player
Earphone
2 Press MUSIC on the remote control to change to the music port. The Music screen is displayed.
Music playback from the music player is heard through the TV speakers.
ENGLISH
17
Basic Operations
Setup Wizard
The Setup Wizard will assist you with setting up
your TV for the rst time. Please follow the
instruction carefully.
Note: If you would like to setup over-the-air or cable
programming, make sure the antenna or cable TV system is
connected. See page 15 for setup.
1 When you turn on the TV for the rst time, the
Setup Wizard screen will appear.
2 Press or to select the menu language, then
press OK.
TV Mode
Mode Selection
Mode:
Change Select
Home Mode
OK
RETURN
Previous Setup
INFO
Exit
4 Press or to select the Time Zone, then press
OK.
Menu Language
Language Selection
Language:
Change Select
English
OK
INFO
Exit
3 Press or to select the TV Mode, then press
OK.
TV Mode options :
Home Mode: Select this mode for in
home use.
Retail Mode: Select this mode for in
store demo.
High Performance Mode: Select this
mode for high performance picture quality
presets.
Note:
t Retail mode is for retailers only.
t To exit Retail mode, see page 19.
Time Zone
Select the Time Zone
Time Zone:
Change Select
Alaska
OK
RETURN
Previous Setup
INFO
Exit
5 Press or to set Daylight Saving Time “ON” or
“OFF”, then press OK.
Daylight Saving
Daylight Saving Selection.
Daylight Saving:
Change Select
OK
Off
RETURN
Previous Setup
INFO
Exit
6 Press or to select the TV service, then press
OK.
18
Basic Operations
Auto Scan
Select the Signal Type of your TV input
and start auto scan.
Signal Type:
Start Scan
Cable
Exit Retail Mode
1 Press RETURN.
2 Press or to select “OK”, then press OK to
conrm.
Do you wish to exit Retail Mode?
ENGLISH
ChangeMove Select
OK
RETURN
Previous Setup
INFO
Exit
7 Press OK to start channel scan.
Scanning
Channel scan in process, if you want to stop
scanning, please press "Stop Scan".
Scan Status:
Analog Channel:
Digital Channel:
OK
0%
Stop Scan
Select
0
0
Note:
t Scanning may take some time to complete.
t Select Stop Scan to cancel the auto scan at anytime.
8 When auto scan is complete, press OK to
continue.
CancelOK
Basic TV Operation
Changing Channel
Press the number buttons to directly select
channels.
Note: After pressing the number buttons, there will be
a few seconds delay before the TV changes channel. To
change to the channel right away, press ENT after pressing
the number buttons.
To Browse Channel
Press the Channel up/down buttons on the
remote control or
CH
increase or decrease the channel.
CH
,
on the TV to
Scan Finish
Channel scan completed.
Analog Channels:
Digital Channels:
OK
Select
OK
12
26
RETURN
9 Press OK to complete setup.
Finish
Initial Setup has finished, please press "OK" to
exit Setup Wizard.
OK
OK
Select
RETURN
Previous Setup
Previous Setup
INFO
INFO
CH
Press to scroll through the
channels manually.
To Select Analog Channels
1~9 Press 1~9 as needed. Example,
to select channel 2, press 2, then
press ENT.
Exit
10~99 Press the 2 digits in order.
Example, to select channel 15,
press 1, 5, then ENT.
100~135: Press the 3 digits in order,
Example, to select channel 130,
press 1, 3, 0, then press ENT.
Exit
19
Basic Operations
To Select Digital Channels
Press the rst 3 digits, then press
the remaining number. Example, to select channel
15-1, press 1, 5,
To Select by Channel List
All channels found from channel scan are listed on
the Channel List screen. You can select channels
from this screen.
_
, 1, then press ENT.
_
, followed by
1 Press ENT to display the Channel List screen.
2 Press or to select a channel number,
then press ENT.
3 Press RETURN to close the Channel List
screen.
Mute Volume
Press MUTE to turn the sound o. To turn the
sound back on, press MUTE again or any of the
VOL buttons.
Set Aspect Ratio
1 Press WIDE to display the Wide menu.
2 Press WIDE repeatedly or press or to
scroll through the options, then press OK.
Normal
When watching a 4:3 content,
the TV displays a standard
picture with black side bars.
When viewing a 16:9 content,
it displays a full picture.
Wide
When displaying a 4:3
content, the picture is
stretched horizontally to ll
the width of the screen. When
watching a 16:9 content, the
image is slightly overscan.
Set Sleep Timer
Sleep timer sets the TV to automatically turn o
after a preset amount of time. After setting a preset
amount of time, the TV will automatically turn o
after the timer has expired.
1 Press SLEEP to display the Sleep screen.
2 Press SLEEP repeatedly or press or to
scroll through the options, then press OK.
To cancel sleep, set the timer to O.
Display Info
Press INFO to display the channel or input
information on the screen.
Press INFO again to hide the Info screen.
Zoom
The entire picture is uniformly
enlarged to retain its original
proportion. However, some
parts of the picture may be
hidden.
Panoramic
The picture is stretched
horizontally on the left and
right sides to ll the width of
the screen. The center of the
picture is not stretched.
Stretch
The picture is stretched
horizontally on the left and
right sides.
20
Note:
t Panoramic mode is only available on 4:3 contents.
t Stretch is only available on 16:9 contents.
Basic Operations
HDMI PC TV
VIDEO COMP MUSIC
Selecting Input Source
The TV provides various ways to select the input
source:
On the TV Panel
t Press
INPUT
input source options. The highlighted input
source is selected after a few seconds.
On the Remote Control
t Press INPUT repeatedly to scroll through the
input source options, then press OK to select
the input.
t To directly select an input source, press the
direct input button located at the bottom of the
remote control.
repeatedly to scroll through the
Multimedia Mode
The TV allows you to play photos slide shows from
a USB memory stick
Playing Multimedia Files
1 Insert the USB memory stick into the USB slot
of the TV.
TV
(side panel)
USB
2 A message box will appear on the screen.
Press
or to select OK.
Take note of the correct direction.
Do not force the device into the slot.
ENGLISH
USB media detected. Enter multimedia
menu?
CancelOK
3 Press OK to select your option.
21
4 The displayed screen varies depending on the media type you selected.
Basic Operations
Press
, , or to select a le or function, then press OK.
Multimedia: Photo
File Name: P1130130
Resolution:
Size:
1
2
Sort:
View:
3
4
1 Start Slideshow button: Play slide show.
2 Sort button: Change sorting order. The label on this button varies depending on the
current sorting order. (Name A-Z, Name Z-A, Newest First, Oldest First)
3 View button: Change view mode. The button label varies depending on the current view.
(Folders, Thumbnails)
4 Setting button: Change slide show settings.
Photo
768x1024
113KB
Start Slideshow
Name A-Z
Folders
Setting
PATH:/MMP/Photo/
.. P1130130 P1130131
P1130132 P1130133 P1130134
P1130135 P1130136 P1130137
Page 1 of 7
7 To exit USB mode, press
MEDIA
. Or, to go back to a previous screen, press
RETURN.
Note: To playback les in Multimedia mode at a later time, press MEDIA.
Audio Only Mode
While watching TV or playing music, you can set the TV to Audio Only mode to turn o the TV display
and save power.
1 Press AUDIO to activate Audio Only mode. A message appears on the screen, then after a few
seconds, the TV display turns o.
2 Press any button to turn on the display again and exit Audio Only mode.
22
Basic Operations
Kensington Lock
Security Deterrent Kensington Lock
The TV provides you with security deterrent slot hole that are compatible to Kensington Locks. This helps
securely ax the TV physically to other objects. The appearance and locking method diers depending
on the manufacturer. Refer to the manual provided with the Kensington Lock for information on installation.
The location of the security deterrent slot diers depending on the TV model. Please refer to your TV
model and security deterrent slot location below:
ENGLISH
Note: The Kensington Lock is not included with the product.
23
Basic Operations
Wall Mount
Installing Wall Mount
The wall mount kit allows you to mount the TV on the wall. For detailed information on installing the wall
mount, see the instructions provided with the wall mount kit.
Note: The wall mount kit is not included with the product.
For product protection and safety reasons, JVC strongly recommends contacting a technician or professional for assistance installing the wall mount and setting up the TV. If you
decide to install the wall mount and TV without the assistance of a technician or professional, JVC will not be responsible for any damage to the product or injury to yourself or
others.
Do not install your wall mount while your TV is turned on. It can result in personal injury
due to electric shock
1 Disconnect all cables connected to your TV.
2 &DUHIXOO\SODFHWKH79IDFHGRZQRQDÀDWDQGFOHDQVXUIDFH,WLVUHFRPPHQGHG
to place the TV cover or protection sheet between the TV and at surface.
3 Remove the at head screw on the base.
4 Remove the pen head screw on the back of TV.
5 Attach your wall mount and TV to the wall, carefully following the instructions provided with
the wall mount.
Wall Mount Speciſcations VESA
Product Model # VESA hole pattern (mm) Standard Screw Screw Length (mm)
BC50R (50”)
24
400 x 400 M8 16mm
Adjusting the Menu Settings
V
V
Quick Menu Operation
Main Menu
1 Display the menu.
Input
Picture
Audio
Setup
Closed Caption
Wide
Channel
Remote Control TV Panel
Press MENU.
TV
TV
Video
Component
HDMI-1
HDMI-2
HDMI-3
Music
Options or submenu
MENU
Press
ENGLISH
.
2 Select a menu option.
3 Adjust or select the
setting.
1. Press
or to select a
menu or option.
2. Press OK or
to enter a
menu or conrm an option.
1. Press
or to select
an option. Or, press
to adjust a setting, such
as Brightness.
2. Press OK to apply the
settings.
or
1. Press or to
CH
CH
select a menu or option.
2. Press to enter
INPUT
a menu or conrm an
option.
1. Press
CH
or
CH
to
select an option. Or,
_
press
OL
or
OL +
adjust a setting, such as
Brightness.
2. Press
to apply the
INPUT
settings.
to
4 Exit the menu.
To exit the menu, press
RETURN. Or, to return to a
Press
MENU
.
previous screen one at a time,
press MENU or
.
25
Adjusting the Menu Settings
Input Menu
Select the input source signal.
TV: To watch analog or digital TV channels.
Video: To use VCRs, camcorders, or game consoles connected via
composite connection.
TV
TV
Component: To use VCRs, camcorders, or game consoles connected via
component connection.
HDMI 1(ARC): To use devices connected via HDMI connection, or AV
receiver support HDMI ARC (audio return channel).
HDMI 2,3: To use devices connected via HDMI connection.
Music: To play music from a music player connected via music port.
Picture Menu
Adjust picture options such as birghtness, contrast, and advanced picture settings.
Picture Mode
Select the picture mode.
Custom For custom picture settings.
Standard For standard picture settings.
Movie For moving pictures such as movies.
Game
Vivid For bright and vivid picture settings.
Sport Suggested settings for sporting events.
Backlight
For fast and dynamic pictures suitable with playing
games.
Video
Component
HDMI-1
HDMI-2
HDMI-3
Music
Picture Mode
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Size & Position
Color Temperature
Ambient Light Sensor
Advanced Picture
Reset Picture Mode
Standard
85
50
80
60
0
8
Medium
Adjust the backlight that aects the overall brilliance of the picture. (0 ~100)
Contrast
Adjust the white level in the picture. Low contrast makes pictures look dark, high contrast makes
pictures washed out. (0 ~100)
Brightness
Adjust the brightness setting. (0 ~100)
Color
Adjust the amount of color level in the picture. (0 ~100)
26
Adjusting the Menu Settings
Tint
Adjust the picture hue. (-50 ~ 50)
Sharpness
Adjust the sharpness of the edges of elements in the picture.
Size & Position
Horiz. Position / Vertical Positon Adjust the horizontal / vertical position of the picture.
Horizontal Size / Vertical Size Adjust the horizontal / vertical size of the picture.
Color Temperature
Color Temperature
Red / Green / Blue Gain
Red / Green / Blue Oset
Reset Color Temperature Reset the color temperature to default settings.
Apply a preset color temperature setting.
(Custom / Cool / Natural / Warm)
Adjust the red / green / blue gain settings according to your
preference.
Adjust the red / green / blue oset settings according to your
preference.
Ambient Light Sensor
Select the sensitivity of the ambient light sensor to automatically adjust to light changes in the
room. (O / Low / Medium / High)
ENGLISH
Advanced Picture
CrystalColor™
Dynamic Contrast
Local Dimming
Noise Reduction
Digital NR
Film Mode
CrystalColor™ produces more vivid and crisp color
pictures. (Off / Normal / Rich)
Dynamic contrast automatically enhances the
image for greater picture details.
Enable or disable local area backlight dimming
(ON / OFF)
Reduce the noise level.
(O / Low / Medium / High)
Reduce noise level of digital signals.
(O / Low / Medium / High)
Produce smoother motion picture when viewing
movies .
Reset Picture Mode
Reset the picture mode setings to default.
Crystal Color
Dynamic Contrast
Local Dimming
Noise Reduction
Digital NR
Film Mode
TM
Off
Off
Off
Off
Off
Off
27
Adjusting the Menu Settings
Audio Menu
XinemaSound™ 3D
Expansive & immersive, multi-dimensional surround sound experience.
Note:
t When XinemaSound™ 3D is on, Equalizer Settings menu is not available.
XinemaSound™ Leveler
Delivering smooth, steady volume levels from the quietest sound to the
loudest volume with exceptional audio clarity.
Bass
Adjust the bass level to your preference. (-12 ~ 12)
XinemaSound™ 3D Off
XinemaSound™ Leveler Off
Bass 8
Treble 7
Balance 2
Lip Sync 2
TV Speakers Off
Audio Only
Digital Audio Out Off
Analog Audio Out Fixed
Equalizer Settings
Reset Audio Mode
Treble
Adjust the treble level to your preference. (-12 ~ 12)
Balance
Adjust the audio level of the L/R channels of the speakers to your preference. (-10 ~ 10)
Lip Sync
Adjust to match the movements and the lips of the person talking on the screen. (0 ~ 5)
TV Speakers
Turn the internal speakers on or o.
Audio Only
Output audio from the TV speakers but turn o the TV display. See page 24.
Digital Audio Out
Select the type of digital audio output. (O / Dolby Digital / PCM)
Analog Audio Out
Select the type of analog audio output. (Fixed / Variable)
Equalizer Settings
Adjust the equalizer settings. (120Hz / 500Hz / 1.5KHz / 5KHz / 10KHz)
Reset Audio Mode
Reset the audio mode setings to default settings.
28
Adjusting the Menu Settings
Setup Menu
Name Input
The Name Input feature of the TV allows you to add a label name on
an input source.
To label an input source , perform the following steps:
1 Press MENU.
2 Press or to select “Setup”, then press or OK.
3 Press or to select “Name Input”, then press or OK.
4 Press or to select “Input Source”, then press or OK.
5 Press or to select the input source that you want to add
a label name to, then press OK.
6 To select a custom label:
1. Press
then press
2. Press
To enter desired label:
1. Press
2. Press
or to select “Input Labels”,
or OK.
or to select “Custom” and press OK.
or to select the text box, then press OK.
, , or to select a character, then press OK.
Name Input
CEC Settings
Menu Language
Time & Local Settings
Parental Control
Power Indicator
Setup Wizard
System Information
Reset All Settings
Input Source
Input Labels
My Input
ENGLISH
English
On
Component
Custom
3. Press
, , or to select “OK”, then press OK.
Press RETURN to close the menu screen.
CEC Settings
CEC allows you to control devices using your TV remote control when the CEC devices are
connected via HDMI.
CEC Function
Device Search If CEC Function is enabled, select to search for CEC devices.
System Audio Control Connect to your device though Audio Return Channel-enabled HDMI Port
Menu Language
Select the on-screen menu language.
Enable or disable CEC function.
(HDMI 1)
29
Adjusting the Menu Settings
Time & Local Settings
Time Zone Select a location to apply the time zone.
Daylight Saving Enable or disable daylight saving time.
Parental Control
The Parental Control feature allows you to control and restrict TV programs by Channel Lock , TV
Rating, or Movie Rating.
Access Parental Control Menu
The Parental Control menu requires you to enter the password to access its submenu.
1 Press MENU.
2 Press or to select “Setup”, then press or OK.
3 Press or to select “Parental Control”, then press or OK.
4 Enter the 4-digit password. Press , or to select “OK”, then press OK to access the submenu
options.
Please enter password.
CancelOK
Note: The default password is “0000”.
5 Press or to select the submenu options, then press or OK to enter the submenu.
Restrict By Channel
Use the Channel Lock feature to restrict viewing a specied channel. Once locked channel is selected, the
TV displays a blank screen.
1 In the “Parental Control” menu, press or to select “Channel Lock”, then press or OK.
2 Press or to highlight a channel that you want to lock.
3 Press OK to mark and lock the channel.
4 Press to return to the previous screen or press RETURN to close the
menu screen.
Restrict By TV/Movie Rating
You can select which TV/Movie rating to lock for viewing.
Enable Rating
Channel Lock
USA-TV
USA-Movie
CAN-English
CAN-French
Alt. Region Rating
Off
1 In the “Parental Control” menu, press or to select a rating
submenu, then press
t “Enable Rating”: Select “On” to enable rating.
t “USA-TV”: Set the rating by age level and genre.
30
or OK.
Block Unrated Shows
Change Password
Reset Parental Setting
Off
Adjusting the Menu Settings
t “USA-Movie”: Set by USA movie rating standards.
t “CAN-English”: Set by Canadian English movie rating standards.
t “CAN-French”: Set by Canadian French movie rating standards.
t “Block Unrated Shows”: Select “On” to block unrated shows.
2 Press or , then press OK to select the rating.
3 Press to return to the previous screen or press RETURN to close the menu screen.
Change Password
1 In the “Parental Control” menu, press or to select “Change Password”, then press or OK.
2 Enter a new password, then press OK.
3 Re-enter the new password, then press OK to complete.
Setup Wizard
Run the guided setup.
System Information
Display the system information of the TV.
Reset All Settings
ENGLISH
Reset all TV settings to default settings.
31
Adjusting the Menu Settings
Note: Either “Analog Closed Caption” or “Digital Closed Caption” is available depending on your TV service.
Closed Caption
Closed Caption decodes and displays closed caption data of television programs as subtitle. This feature
displays text on the screen or it translates and displays text in another language.
1 Press MENU.
2 Press or to select “Closed Caption”, then press or OK.
3 Press or to select “Analog Closed Caption” or
“Digital Closed Caption, then press
or OK.
Analog Closed Caption
Digital Closed Caption
Digital CC Options
4 Press or to select a closed caption type or select “O” to disable this feature, then press OK.
For digital closed caption, you can select closed caption options, such as text size and text color.
Press
or to select “Digital CC Options”, then press OK. Select desired options.
5 Press RETURN to close the menu screen.
Channel Menu
Select Antenna / Cable
Off
Off
Select Antenna or Cable for the service connected to your TV.
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
TV Mode
Auto Channel Scan
3 Press or to select “TV Mode”, then press or OK.
4 Press or to select “Antenna” or “Cable”, then press OK.
Partial Channel Scan
Find Channel
Channel Management
Scan Channels
Digital MTS
Auto Scan Channels
When you run auto scan, the TV scans for all available channels. Make sure the antenna/cable is
connected properly. See page 15.
Note: Auto scan may take 15 to 30 minutes to nd available channels.
1 Press MENU.
2 Press or to select “Auto Channel Scan”, then press or OK.
3 Press or to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scanning, select “Stop Scan” and press
OK.
Cable
English
32
Adjusting the Menu Settings
Partial Scan Channels
You can partially scan for network signal within a specied range of channels.
1 Press MENU.
2 Press or to select “Partial Channel Scan”, then press or OK.
3 Press or to select “Scan Mode”, then press or OK.
4 Press or to select an option, then press OK.
t “Analog/Digital”: scan for both analog and digital channels
t “Analog”: scan for analog channels
t “Digital”: scan for digital channels
5 Press or to select “From Channel”, then enter a starting channel range.
6 Press or to select “To Channel”, then enter an ending channel range.
7 Press or to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new
channels.
1 Press MENU.
ENGLISH
2 Press or to select “Channel”, then press or OK.
3 Press or to select “Find Channel”, then press or OK.
4 Press or to select “Enter Channel”, then enter a channel.
5 Press to select “Add Channel”, then press OK.
Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
3 Press or to select “Channel Management”, then press or OK.
4 Press or , then press OK to mark the channels that you want to remove from the Channel List.
5 Press RETURN to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn o after a preset amount of time. See page 21.
33
Supported Resolution
Appendix
Supported Video Timing
(NTSC, Composite)
Supported Video Timing
(ATSC, Component, HDMI)
480i
480i, 480p, 720p, 1080i, 1080 24p/60p
34
Troubleshooting
If your TV fails to work properly, check the following guidelines for possible causes and solutions.
Consult your local dealer or service outlet if problems persist.
Problem Solution
No power. t Make sure the power cord is plugged in.
t The power is o, press the Power button to turn on the TV.
t Try another outlet.
t Unplug the unit for an hour, then plug it back in.
Poor sound or no sound. t Press the VOL
button on the TV.
t Press MUTE on the remote control to ensure that mute is not on.
t The channel or cable TV is experiencing problems, tune to
another channel.
t Check the TV audio settings.
t Check for possible sources of interference.
Poor picture or no picture. t The channel or cable TV is experiencing problems, tune to
another channel.
button on the remote control or the VOL +
ENGLISH
t Make sure that channels are set into memory.
t Check the antenna or cable TV connections.
t Check for possible sources of interference.
Poor reception on some
channels.
The remote control does
not work.
TV shuts o. t Sleep timer is set.
No CATV reception. t Check all cable TV connections.
t The channel or cable TV is experiencing problems, tune to
another channel.
t Make sure that channels are set into memory.
t The network signal is weak, adjust the antenna to receive better
reception.
t Check for possible sources of interference.
t Batteries may be weak, dead, or inserted incorrectly.
t Point the remote control directly at the remote sensor on the TV
with an angle of 35º.
t Remove any obstacles between the remote control and the TV.
t Remote control is out of range, move closer to the TV.
t Power is interrupted.
Closed caption is not
activated.
t Set the TV Mode in Channel menu.
t The program tuned is not closed captioned. Try another channel.
t Enable Closed Caption in the menu.
35
Speciſcations
Model Name BC50R
Size Class (Diagonal) 50” (50.5” diagonal)
Resolution/Aspect 1920 x 1080 / 16:9
Backlit Edge LED
Frame Rate 120Hz CrystalMotion™
Contrast Ratio 20M:1 (Dynamic)
Viewing Angle 178/178
Display Color
TV Features
Color Enhancement Yes, CrystalColor™
Built-in NTSC/ ATSC/ Clear QAM tuner Yes
Local Dimming Yes
Close Caption Yes
Parental Control Yes, V-Chip 2.0
Audio Technology
MTS Decode Yes
Speaker Output Power 20W (10Wx2)
Ambient Sensor Yes
Audio Only Mode Yes
HDMI-ARC Yes, HDMI – 1
HDMI-CEC Yes
USB Multimedia Picture
Energy Star
Input / Output
Input Antenna in 1
HDMI 3
Component / Composite (RCA) 1 (shared)
Music port 1 (shared with Component Audio In)
USB 1
Output Optical Digital Audio Out 1
Stereo Audio Out 1 (headphone)
Mechanical
Wall Mount Pattern VESA (400x400mm), M8 screws
Without Stand (approx.) 44.3” x 26.2” x 2”, 34.87 lbs
With Stand (approx.) 44.3” x 28.4” x 11”, 40.7 lbs
Dolby Digital Decode
16.7M
XinemaSound™ 3D
Ye s
Carton (approx.) 51.7” x 30.4” x 5”, 47.08 lbs
Input Voltage 120V AC
Max Power Consumption Max: 125W
Standby: <1W
Note : CrystalMotion™ is a set of motion enhancement technologies including Motion-Estimation/Motion-
Compensation or Backlight Scanning or both.
36
Limited Warranty
ON PARTS AND LABOR
This Limited Warranty covers units that are purchased as new and in the United States Only. This Product
is manufactured, distributed, and warranted by AmTRAN Video Corporation (hereinafter known as
“Warrantor”) under brand license by JVC KENWOOD Corporation. The Warrantor provides a warranty to
the original purchaser of a new Product against defects in materials and workmanship for a period of
one (1) year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by
this warranty is determined to be defective within the warranty period, the Warrantor will either repair or
replace the Product at its sole option and discretion.
To obtain warranty service, contact our Technical Support:
Visit the Web Site: go.jvc.com/HDTVSupport/
Or call our Customer Support and Service Center
1-855-868-1928
ENGLISH
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A DESIGNATED SERVICE
CENTER.
Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a
Product is within the warranty period.
Parts and Labor
TThere will be no charge for parts or labor during the warranty period. Replacement parts and
Products may be new or recertied at the Warrantor’s option and sole discretion. Replacement parts and
Products are warranted for the remaining portion of the original warranty or for ninety (90) days
from warranty service or replacement, whichever is longer.
Type of Service
Defective Products must be sent to the designated service center to obtain warranty service. The
Warrantor is not responsible for the transportation costs to the service center, but will cover the costs for
return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY
PRODUCT TO A DESIGNATED SERVICE CENTER FOR WARRANTY SERVICE.
Product returned to designated service centers must utilize either the original carton box and shipping
material or packaging that aords an equal degree of protection. Technical Support will
provide instructions for packing and shipping the covered Product to the designated service center.
37
Limitations and Exclusions
The Warrantor’s one-year limited warranty only covers defects in materials and workmanship. This
warranty does not cover product issues caused by any other reason, including but not limited to
cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges,
signal issues, damages from shipping, acts of God, any type of customer misuse, modications or
adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by
an authorized service center. Products with unreadable or removed serial numbers, or requiring routine
maintenance are not covered. This one year limited warranty does not cover Products that are sold “AS IS”,
“Open Box”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME
SET FORTH ABOVE. THE WARRANTOR’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES
RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING WARRANTOR’S NEGLIGENCE, ALLEGED
DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL
IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. THE WARRANTOR SHALL NOT BE
RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE
OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK TV.JVC.COM FOR THE MOST CURRENT VERSION.
Personal Data
IIf your Product is capable of storing personal data and other information, all contents and information
will be deleted in the course of some in-home and all ship-in warranty service. If this occurs, your
product will be restored to you congured as originally purchased. You will be responsible for restoring
all applicable data and passwords. Recovery and reinstallation of user data is not covered under this
Limited Warranty. In order to protect your personal information, we recommends that you always clear all
personal information from the unit before it is serviced, regardless of the servicer.
AmTRAN Video Corporation, PO Box 50427 Irvine, CA 92619
38
Product Registration
WůĞĂƐĞĚŽŶŽƚƐĞŶĚƉƌŽĚƵĐƚƐŽƌŽƚŚĞƌ
ĐŽƌƌĞƐƉŽŶĚĞŶĐĞƚŽƚŚŝƐĂĚĚƌĞƐƐ
ƚƚŶWƌŽĚƵĐƚZĞŐŝƐƚƌĂƚŝŽŶ
WKKyϱϬϰϮϳ
/Zs/EϵϮϲϭϵ
KŶůŝŶĞZĞŐŝƐƚƌĂƚŝŽŶ'K:sKD,ds^ƵƉƉŽƌƚ
WZKhdZ'/^dZd/KE
&ŝƌƐƚEĂŵĞ ĂƚĞŽĨWƵƌĐŚĂƐĞ
>ĂƐƚEĂŵĞ DŽĚĞůEƵŵďĞƌ
ĚĚƌĞƐƐ ^ĞƌŝĂůEƵŵďĞƌ
Ɖƚη WƵƌĐŚĂƐĞWƌŝĐĞ
ŝƚLJ ĞĂůĞƌ
^ƚĂƚĞ
ŝƉŽĚĞ
WŚŽŶĞEƵŵďĞƌ
ͲDĂŝůĚĚƌĞƐƐ
W>
^dDW
,Z
ϭͿ tŽƵůĚLJŽƵůŝŬĞƚŽƌĞĐĞŝǀĞƚŚĞ:sŽŵŵƵŶŝƚLJĞͲŵĂŝůŶĞǁƐůĞƚƚĞƌ
ϮͿ tŽƵůĚLJŽƵůŝŬĞƚŽƌĞĐĞŝǀĞƐƉĞĐŝĂůŽĨĨĞƌƐĨƌŽŵ:s
zĞƐ
zĞƐ
EŽ
EŽ
ŽŵŵĞŶƚƐ
d,E<zKh&KZWhZ,^/E'd,/^:sWZKhd
ZĞŐŝƐƚĞƌŝŶŐLJŽƵƌƉƌŽĚƵĐƚǁŝůůĂůůŽǁƵƐƚŽĐŽŶƚĂĐƚLJŽƵŝŶƚŚĞƵŶůŝŬĞůLJĞǀĞŶƚĂ
ƉƌŽĚƵĐƚƐĂĨĞƚLJŶŽƚŝĨŝĐĂƚŝŽŶŝƐƌĞƋƵŝƌĞĚ
dŚŝƐĨŽƌŵŝƐĨŽƌWƌŽĚƵĐƚZĞŐŝƐƚƌĂƚŝŽŶƉƵƌƉŽƐĞƐŽŶůLJ&ĂŝůƵƌĞƚŽƌĞƚƵƌŶƚŚŝƐĨŽƌŵ
ĚŽĞƐŶŽƚĚŝŵŝŶŝƐŚLJŽƵƌƌŝŐŚƚƐĚƵƌŝŶŐƚŚĞǁĂƌƌĂŶƚLJƉĞƌŝŽĚ
/ŶƐƚƌƵĐƚŝŽŶ&ŽůĚĂƚĐƌĞĂƐĞĂŶĚƚĂƉĞŽƉĞŶĞĚŐĞŝŶƚŚĞ
ŵŝĚĚůĞ
We Are Here To Help!
Before Returning the Product
Call Our Customer Service at
1-855-868 1928
We can help you with
x Damaged Package
x Missing Parts
x Technical Support
Loading...