JVC AV32P10EK, AV32L5EK, AV32P10EI, AV32L5EI User Manual

Specifications

SpecificationsSpecifications

COLOUR TELEVISION

Item

Broadcasting systems CCIR I

Colour systems PAL

Channels and frequencies

Sound-multiplex systems NICAM (I) system

Teletext systems FLOF (Fastext), WST (World Standard Text)

Power requirements 220 - 240 V AC, 50 Hz

Power consumption Maximum: 189 W, Average: 140 W, Standby: 2.8 W

Picture tube size Viewable area 76 cm (measured diagonally)

Audio output Rated Power output: 7.5 W + 7.5 W

Speakers (20 cm × 4 cm) oval × 2

EXT-1 terminal Euroconnector (21-pin, SCART)

EXT-2 terminal Euroconnector (21-pin, SCART)

EXT-3 terminal Euroconnector (21-pin, SCART)

EXT-4 terminal RCA connectors × 3

AUDIO OUT terminal RCA connectors × 2

Headphone jack Stereo mini-jack (3.5 mm in diameter)

Dimensions (W × H × D) 901 mm × 556 mm × 557mm

Weight 53.9 kg

Accessories Remote control unit × 1 (RM-C56)

Model

•

E21-E69

•

S-VIDEO connector

•

AAA/R03 dry cell battery × 2

AV32L5EK* (UK model) AV32L5EI* (Ireland model)

The EXT terminals also support the NTSC 3.58/4.43 MHz system.

IR A-J, E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2

Video input, Audio L/R inputs and RGB inputs are available. TV broadcast outputs (Video and Audio L/R) are available.

Video input, S-VIDEO (Y/C) input, Audio L/R inputs and RGB inputs are available. Video and Audio L/R outputs are available. T-V LINK functions are available.

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

× 1

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

Variable audio L/R outputs are available. Variable out 0-1 Vrms, low impedance

COLOUR TELEVISION

AV32P10EK / AV32P10EI / AV32L5EK / AV32L5EI

AV32P10EK

AV32L5EK

(UK model)

AV32P10EI AV32L5EI

(Ireland model)

Contents

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . .4

T-V LINK functions . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Using your TV–the basics. . . . . . . . . . . . . . . . . . . . . .8

Remote control buttons and functions

Using the TV’s menus. . . . . . . . . . . . . . . . . . . . . . . .17

Picture setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Picture features. . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Sound setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

DIGITAL SURROUND (Only AV32P10EK and AV32P10EI)

EXT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Other menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Further preparation . . . . . . . . . . . . . . . . . . . . . . . . . .37

TV buttons and parts . . . . . . . . . . . . . . . . . . . . . . . .41

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

. . . . . . . . . . . . .11

. .23

* A basic model number. The actual model number may have characters added (such as “S” denoting silver) indicating the colour

of the TV set.

We may change the design and specifications without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this would be an infringement of copyright.

VICTOR COMPANY OF JAPAN, LIMITED

LCT0909-001B-U

0106-T-CR-JMUK

INSTRUCTIONS

Thank you for buying this colour television. To make sure you fully understand how to use your new TV, please read this manual thoroughly before you begin.

Safety precautions

Safety precautionsSafety precautions

■■■■

Warning

WarningWarning

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

■■■■

Caution

CautionCaution

To ensure personal safety, observe the following rules regarding the use of this unit.

1 Operate only from the power source specified

(AC 220 – 240 V, 50 Hz) on the unit.

2 Avoid damaging the mains plug and power

cord.

3 Avoid improper installation and never position

the unit where good ventilation is unattainable. When installing this television, distance recommendations must be maintained between the floor and wall, as well as installation in a tightly enclosed area or piece of furniture. Please adhere to the minimum distance guidelines shown for safe operation.

15 cm

■■■■

Warning

WarningWarning

DO NOT cut off the mains plug from this equipment.

power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If a new mains plug has to be fitted, then follow the instruction given below:

If the plug fitted is not suitable for the

Important

Do not

make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-andyellow.

The wires in the mains lead on this product are coloured in accordance with the following code: Blue: Neutral Brown: Live

10 cm 10 cm 15 cm

4 Do not allow objects or liquid into the cabinet

openings.

5 In the event of a fault, unplug the TV and call a

service technician. Do not attempt to repair it yourself or remove the rear cover.

6 The surface of the TV screen is easily

damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

7 The main power button on the TV does not fully

isolate the TV from the mains supply. If you are not going to use this TV for a long period of time, be sure to disconnect the mains plug from the mains outlet.

As these colours may not correspond with the coloured marking identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover.

If in doubt — consult a competent electrician.

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse.

Fuse

■■■■

Guidelines for safe operation

Guidelines for safe operationGuidelines for safe operation

This equipment has been designed and manufactured to comply with international safety standards. However, as with any electrical appliance, care must be taken to ensure optimal results and operational safety.

• Before attempting to use this equipment, read the operating instructions thoroughly.

• Ensure that all electrical connections (including the mains plug, extension leads, etc.) have been made in accordance with the manufacturer’s instructions.

• If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.

• Handle all glass panels or covers with care.

• Never operate this equipment if it appears damaged or operates abnormally. Turn the power off,

disconnect the main power plug and consult your dealer.

• Never remove any affixed panels or covers. Doing so may result in electrical shock.

• Never leave this equipment operating unattended unless otherwise specifically stated that it is designed

to do so or in standby mode. Only use the designated power switch to turn off the power and ensure that all potential users are instructed how to do so. Make special arrangements for infirm or handicapped persons.

• Never listen to headphones at high volume. Doing so may damage your hearing.

• Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a

malfunction or damage.

• Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer’s approved stand or legs, use only the fixtures provided and follow the installation instructions.

• Never allow this equipment to be exposed to rain or moisture.

• Never allow anyone, especially children, to insert anything into an opening in the case. Doing so may

result in a fatal electrical shock.

• Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.

Setting up your TV

Setting up your TVSetting up your TV

Connecting the aerial and video cassette recorder (VCR)

■■■■

Connecting the aerial and video cassette recorder (VCR)Connecting the aerial and video cassette recorder (VCR)

If you are connecting a VCR, follow

→

B → C in the diagram opposite.

If you are not connecting a VCR, follow 1.

• For more details, see the manuals that came with the equipment you want to connect.

• The connecting cables are not provided.

• You can watch a video using the VCR without doing C.

For details, see your VCR instruction manual.

• To connect more equipment, please see “Further preparation” on page 37.

To connect additional audio equipment, see “Using

•

additional audio equipment” on page 39.

• To connect other equipment (such as a DVD player) with a digital output terminal for Dolby Digital, see “Listening to Dolby Digital audio (Only AV32P10EK and AV32P10EI)” on page 38.

• If you connect a decoder to a T-V LINK compatible VCR, set the DECODER (EXT-2) function to ON. For details, see “Using the DECODER (EXT-2) function” on page 35. Otherwise, you will not be able to watch scrambled channels.

To use the T-V LINK functions, you must have a T-V LINK compatible VCR connected by a SCART cable C to the EXT2 terminal on the TV. For details about T-V LINK functions, see “T-V LINK functions” on page 7.

21-pin SCART

cable

VCR

AV IN/OUT

terminal

Back of the TV

COAXIAL

DIGITAL

AUDIO IN

OPTICAL

SUB

WOOFER

AUDIO OUT

EXT-2

EXT-3

EXT-1

SURROUND REAR

75-ohm

coaxial

cable

75-ohm

coaxial

cable

To aerial

input

To aerial

output

Aerial

Connecting the power cord to the mains outlet

■■■■

Connecting the power cord to the mains outletConnecting the power cord to the mains outlet

Caution:

• Use only the power source specified on the unit

(AC 220 – 240 V, 50 Hz).

Putting batteries into the remote control

■■■■

Putting batteries into the remote controlPutting batteries into the remote control

Use two AAA/R03 dry cell batteries. Insert the batteries holding the - end, making sure the + and

- terminals are correctly lined up.

To open the battery compartment, slide the door downwards and lift off. Replace the door by sliding it upwards until it fastens into place.

• Follow the warnings printed on the batteries.

• Battery life is about six months to one year, depending on

how much you use the remote control.

• If the remote control does not work properly, fit new batteries.

• The batteries we supply are only for setting up and testing your TV. Please replace them as soon as you need to.

• Always use good-quality batteries.

Initial settings

■■■■

Initial settingsInitial settings

When the TV is first turned on, it goes into the initial setting mode, and you will see the JVC logo. Follow the instructions on the screen to make the initial settings.

Press the main power button on the TV

The power lamp lights red (for power on), then green (for TV on) and the JVC logo appears.

Setting up your TV

D0001-EK

• If the power lamp stays red and does not change to green:

your TV is in the standby mode. Press the (standby) button on the remote control to turn your TV on.

• If the JVC logo does not appear this is because your TV has already been turned on for the first time:

use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “INSTALL” on page 30.

BACK

button

Press the

The LANGUAGE menu appears.

LANGUAGE

TV OK

D0002(E)-EK

power lamp

power lamp

1 2 3

4 5 6

7 8

PIP

main power button

yellow button

blue button

Press the 5 and 6 buttons to choose ENGLISH

The on-screen display will then be in English.

TV OK

Setting up your TV

4 Press the

button to start the AUTO

PROGRAM function

The AUTO PROGRAM menu appears and the TV channels you receive are automatically stored in the programme numbers list (PR).

AUTO PROGRAM

20%

BACK

TV OK

D0004-EK

CH 10

EDIT

PR ID AV 01 02 03 04 05 06 07 08 09

TV OK

BACK

MOVE

BBC1 BBC2 ITV CH4 CH5

CH CH CH CH CH CH CH CH CH

If “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu:

You can use the ACI (Automatic Channel Installation) function to decode the ACI data and complete the registration of all the TV channels quickly. For details of the ACI function and how to use it, refer to “Using the ACI function” on page 35.

If you don’t want to use the ACI function, press the button to choose ACI SKIP and then press

To cancel the AUTO PROGRAM function:

Press the b button.

After the TV channels have been

registered in the programme numbers list (PR), the EDIT menu appears

If you want to, you can now edit the programme numbers (PR) using the EDIT/MANUAL function. For details, see “EDIT/MANUAL” on page 31.

If you do not want to edit programme numbers (PR), go to the next step.

6 Press the

button to display the T-V

LINK menu

T-V LINK

DOWNLOAD TV VCR

BACK

TV OK

EXIT

D0005-EK

21 22 23 24 25 26 27 28 29

ID INSERT DELETE MANUAL

8 Now, the initial settings are complete,

and you can watch the TV

Note:

For UK model (AV32P10EK/AV32L5EK):

•

BBC1, BBC2, ITV, Channel 4 and Channel 5 are automatically set to the programme numbers PR1 to PR5. If the TV doesn't receive one of these TV channels, that programme number (PR) will not be set. Programme number PR6 is not normally set.

For Ireland model (AV32P10EI/AV32L5EI):

•

If your TV can detect the TV channel name from the TV channel broadcast signal, the TV channel name is assigned to the programme number (PR) to which the TV channel has been set. However, which TV channels are set to which programme numbers (PR) will depend on the area in which you live.

• If a TV channel you want to view is not set to a programme number (PR), you can set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 31.

• The AUTO PROGRAM function does not set the programme number PR 0 (AV) for your video cassette recorder. You will need to set this using the MANUAL function.

• In some areas you may get TV reception from more than one transmitter, for example different ITV regions. In this case each TV channel could be set twice. If this happens, the first set of channels will have the stronger signal. If you want to delete the second set of channels, you will have to do it manually (see page 33).

For users in the UK:

If you have any problems setting up your new TV, please call the Helpline on 0870 330 5000.

For users in the Republic of Ireland:

If you have any problems setting up your new TV, please contact your local dealer.

7 Follow the T-V LINK menu according to

the type of VCR you have connected to the EXT-2 terminal

If you do not have a T-V LINK compatible VCR connected:

Press the b button to leave the T-V LINK menu.

The T-V LINK menu disappears.

If you have a T-V LINK compatible VCR connected:

Follow the operating procedure “Downloading data to a VCR” on page 35 to transmit the programme number (PR) data.

T-V LINK functions

T-V LINK functionsT-V LINK functions

When you have a T-V LINK compatible VCR connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

Pre-set download

■■■■

Pre-set downloadPre-set download

The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.

You can also carry out this function using your VCR controls.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, check that:

• the VCR power is turned on

• the VCR is T-V LINK compatible

• the VCR is connected to the EXT-2 terminal

• the SCART cable is fully wired

Direct Rec

■■■■

Direct RecDirect Rec

“What You See Is What You Record”

You can easily record to VCR the images that you are watching on the TV.

For details, read the manual for your VCR. Use your VCR controls. “VCR IS RECORDING” is displayed.

In the following situations, the VCR will stop recording if the TV is turned off, if the TV channel or input is changed, or if the menu is displayed on the TV:

• when recording images from an external device connected to the TV (for example a camcorder)

• when recording a TV channel after it has been unscrambled on a decoder

• when recording a TV channel by using the TV’s output because the VCR’s own tuner cannot properly receive that channel

• You cannot carry out Direct Rec using your TV’s control.

• Generally, the VCR cannot record a TV channel that it

cannot receive properly on its own tuner, even if you can view that TV channel on the TV. However, some VCRs can record a TV channel by using the TV’s output if that channel can be viewed on the TV. For details, see your VCR instruction manual.

TV auto power on/VCR

■■■■

TV auto power on/VCR TV auto power on/VCR image view

image view

image viewimage view

When the VCR starts playing, the TV automatically turns on and the images from the EXT-2 terminal appear on the screen.

When the VCR menu is operated, the TV automatically turns on and the images from the EXT-2 terminal appear on the screen.

This function does not happen if your TV’s main power is turned off. Set your TV’s main power to on (standby mode).

Note:

• A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier. For details, see your VCR instruction manual.

“Q-LINK” (a trademark of Panasonic Corporation) “Data Logic” (a trademark of Metz Corporation) “Easy Link” (a trademark of Phillips Corporation) “Megalogic” (a trademark of Grundig Corporation) “SMARTLINK” (a trademark of Sony Corporation)

Using your TV–the basics

Using your TV–the basicsUsing your TV–the basics

Turn the main power on

■■■■

Turn the main power onTurn the main power on

Press the main power button on the TV

The power lamp lights red and your TV is in the standby mode.

If the power lamp lights green, the TV is already on.

To turn the main power off:

Press the main power button again.

The power lamp goes off.

The main power button on the TV does not fully cut the TV off from the mains supply. If you are not going to use this TV for a long time, be sure to pull the mains plug out of the mains outlet.

power lamp

main power button

Turn the TV on from standby mode

■■■■

Turn the TV on from standby modeTurn the TV on from standby mode

Press the # (standby) button, the button, the

buttons or the number

buttons

The power lamp goes from red to green and your TV will be turned on.

To turn the TV off:

Press the

The power lamp changes from green to red and the TV goes into standby mode.

Choose a TV channel

■■■■

Choose a TV channelChoose a TV channel

Choose the programme number (PR) that the TV channel has been set to.

Use the 6 buttons:

Press the 6 buttons to choose the programme number (PR) you want.

Use the number buttons:

Enter the programme number (PR) of the channel using the number buttons.

Example

Use the PR LIST:

Press the h (information) button to

(standby) button again.

• PR12

• PR6 → press 6.

→

press 1 and 2.

display the PR LIST

PR LIST

PR ID

AV 01

BBC1

BBC2

ITV

CH4

CH5 06 07 08 09

TV OK

+10-10

D0006-EK

power lamp

1 2 3

4 5 6

7 8 9

TV OK

.T/L

FREEZE

SUB-P

main power button

PIP

number buttons

Using your TV–the basics

Press the 5 and 6 buttons to choose

a programme number (PR). Then press the

button

• For programme numbers (PR) where you have the CHILD LOCK function set, the next to the programme number (PR) in the PR LIST.

• You cannot use the number (PR) which has the CHILD LOCK set.

• Even if you try to choose a programme number (PR) with the CHILD LOCK set, the appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 28.

• If the picture is tilted, correct it. See “PICTURE TILT” on page 20.

Changing the volume

■■■■

Changing the volumeChanging the volume

Press the

(CHILD LOCK) mark appears

buttons to choose a programme

(CHILD LOCK) mark will

buttons to change the

volume.

The volume indicator appears, and the volume changes, as you press the q buttons.

To listen to the sound using headphones:

See “HEADPHONE” on page 22.

Watching images from

■■■■

Watching images from Watching images from external equipment

external equipment

external equipmentexternal equipment

Choose the EXT terminal that the external equipment has been connected to.

Use the

Press the Pressing the

TV mode

Programme

PR 1 to PR 99

numbers

button:

button to choose an EXT terminal.

button changes the choice as follows:

EXT modes

EXT-1

EXT-2

Use the 6 buttons:

Press the 6 buttons to choose an EXT terminal

Use the PR LIST:

Press the h (information) button to

display the PR LIST

Press the 5 and 6 buttons to choose

an EXT terminal. Then press the

• The EXT terminals are listed after programme number PR

99.

• You can choose two types of video input signal: S-VIDEO (Y/C signal) and regular video (composite signal). For details, see “S-IN (S-VIDEO input)” on page 26.

• When listening to Dolby Digital audio, see “Listening to Dolby Digital audio (Only AV32P10EK and AV32P10EI)” on page 38.

• If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 20.

• If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.

• This TV set can automatically change over the input according to a special signal from an external device. (The EXT-4 terminal does not support it.)

To use the programme number PR 0 (AV):

When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 31. Pressing the

Programme

numbers

PR 1 to PR 99

button changes the choice as follows:

TV mode

EXT modes

EXT-1PR 0

EXT-2

button

EXT-4

EXT-3

EXT-4

• The VCR sends its playback image along the aerial cable as an RF (radio frequency) signal.

• Also see your VCR instruction manual.

To return to a TV channel:

Press the buttons.

button, the 6 buttons or the number

EXT-3

Using your TV–the basics

Using the buttons on the TV

■■■■

Using the buttons on the TVUsing the buttons on the TV

Press the P p buttons to turn the TV on from standby mode

Press the P p buttons to choose a programme number (PR) or an EXT terminal

Press the r (volume) button and the

buttons to change the volume

Press the r (volume) button

The volume level indicator appears

Press the q buttons while the volume

level indicator is on screen

• The buttons on the TV cannot be used to change the volume of the headphones.

Behind the Cover

Side of the TV

EXT-2

EXT-3

EXT-1

AUDIO OUT

E X

Remote control buttons and functions

Remote control buttons and functionsRemote control buttons and functions

1 Muting button

Muting button

Muting buttonMuting button

You can turn the sound off instantly.

Press the l (muting) button to turn off the sound. Pressing the

(muting) button again

restores the previous volume level

1 2 3

4 5 6

7 8 9

TV OK

FREEZE

SWAP

SUB-P

Number buttons

Number buttonsNumber buttons

You can choose a programme number (PR) by entering the programme number

Example:

PIP

• PR12 → press 1 and 2.

• PR6 → press 6.

You can also press the an EXT terminal.

ZOOM button

ZOOM buttonZOOM button

You can change the screen size by changing the picture aspect ratio. The normal aspect ratio is 4:3 (width:height). Choose the ideal one from the following ZOOM modes.

button repeatedly to choose

AUTO:

For any picture format except normal picture (4:3 aspect ratio), the picture will be automatically displayed in the ideal screen size.

For normal picture (4:3 Aspect Ratio), you can choose a ZOOM mode from the 4:3 AUTO ASPECT menu. For details, see “4:3 AUTO ASPECT” on page 20.

• AUTO may not work properly with poor signal quality. In this case, choose the best ZOOM mode manually.

• This TV supports WSS (wide-screen signals). When broadcasts with WSS are received with the ZOOM mode set at AUTO, the most suitable ZOOM mode is automatically chosen according to the WSS received.

How to open the cover

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as this is its original shape.

PANORAMIC:

This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural.

• The top and bottom of the picture are slightly cut off.

Remote control buttons and functions

D0043-EK

14:9 ZOOM:

This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.

16:9 ZOOM:

This zooms up the wide picture (16:9 aspect ratio) to the full screen.

16:9 ZOOM SUBTITLE:

This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

FULL:

This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.

Adjusting the visible area of the

Adjusting the visible area of the Adjusting the visible area of the picture

picture

picturepicture

If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually.

Press the

The ZOOM menu appears.

Press the a button to display the ZOOM

button

mode indicator

The indicator appears.

16 : 9 ZOOM

D0010-EK

While it is displayed, press the 6

buttons to change the height of the picture

• You cannot adjust the visible area in REGULAR or FULL mode.

3D Button (Only AV32P10EK and

3D Button (Only AV32P10EK and3D Button (Only AV32P10EK and AV32P10EI)

AV32P10EI)

AV32P10EI)AV32P10EI)

You can turn the 3D-PHONIC function on or off by one-touch operation.

Press the 3D button

Pressing the 3D button changes the function as follows:

• For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the FULL mode to restore the picture to its original shape.

Choose the ZOOM mode

Choose the ZOOM modeChoose the ZOOM mode

Press the

button to display the

ZOOM menu

ZOOM

AUTO REGULAR PANORAMIC 14:9 ZOOM 16:9 ZOOM 16:9 ZOOM SUBTITLE FULL

BACK

TV OK

D0009-EK

Press the 6 buttons to choose a ZOOM

mode. Then press the

The picture expands and the chosen ZOOM mode is displayed in about 5 seconds.

• The ZOOM mode may be automatically changed by the control signal from an external device. When you want to return to the previous ZOOM mode, choose the ZOOM mode again.

button

3D-PHONIC

SURROUND OFF

Previous surround function

• For details, see “3D-PHONIC” on page 23.

• If another surround function is activated before you press

the 3D button, you can return to that surround function.

• The 3D button does not work while the headphones are connected to the TV.

5 Information button

Information button

Information button Information button

You can display the PR LIST or the current time on the screen.

Press the h (information) button

Pressing the h (information) button changes the display as follows:

PR LIST

PR ID

AV 01

BBC1

BBC2

ITV

CH4

CH5 06 07 08 09

TV OK

+10-10

D0011-EK

• You can choose programme numbers (PR) or EXT terminals with the PR LIST. For details, see “Use the PR LIST:” on page 8.

• This TV uses teletext data to set the time. If the TV has not received a TV channel that has teletext programmes since it was turned on, the time display is blank. To see the time, choose a TV channel that has teletext programmes. The time will still be displayed as long as you do not turn off the TV, even if you choose other TV channels.

• When watching videos, the incorrect time is sometimes displayed.

• The h (information) button will also operate menus. For details, see “Using the TV’s menus” on page 17.

TV button

TV buttonTV button

You can return to a TV channel instantly.

12 : 00

No display

Press the b button.

The TV returns to the TV mode and a TV channel appears.

• The

You can adjust the volume.

button will also operate menus. For details, see

“Using the TV’s menus” on page 17.

Buttons

Buttons Buttons

Press the 5 buttons to adjust the sound.

• The 5 buttons will also operate menus. For details, see

“Using the TV’s menus” on page 17.

Standby button

Standby buttonStandby button

Press the # (standby) button to turn the TV on or off.

When the TV is turned on, the power lamp changes from red to green.

Remote control buttons and functions

9 Colour buttons

Colour buttons

Colour buttonsColour buttons

The colour buttons are used for the teletext operations or the menu operations. For details, see “$ Teletext control buttons and VCR P DVD switch” on page 15 or “Using the TV’s menus” on page 17.

OK button

OK buttonOK button

The a button is used to operate menus. For details, see “Using the TV’s menus” on page 17.

You can choose a programme number (PR) or an EXT terminal.

Buttons

Buttons Buttons

Press the 6 buttons to choose a Programme number (PR) or an EXT terminal.

The 6 buttons will also operate menus. For details, see “Using the TV’s menus” on page 17.

VCR/DVD control buttons and

VCR/DVD control buttons andVCR/DVD control buttons and VCR

VCR PPPP DVD switch

VCR VCR

These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control.

Set the VCR

DVD switch

DVD switch DVD switch

DVD switch to the VCR or

PPPP

DVD position.

VCR:

When you are using a VCR, set the switch to the VCR position.

DVD:

When you are using a DVD player, set the switch to the DVD position.

Press the VCR/DVD control button to

control your VCR or DVD player

• If your device is not made by JVC, these buttons will not work.

• Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using.

• You can use the the VCR will receive, or choose the chapter the DVD player plays back.

• Some models of DVD player use the both operating the fast forward/backward functions and for choosing the chapter. In this case, the 1/ ¡ buttons do not work.

buttons to choose a TV channel

buttons for

+ 30 hidden pages