1. T he des i gn of th is pr od uct con ta ins speci al har d ware , many
circuit s and components specially for saf ety purposes. For
con tinu ed pr ot ecti on , n o chan g es sh ould b e ma de to the o rig i nal
d esign un less a uth or ized in writi n g by th e manu fac t urer .
Replacem ent p arts m ust b e i d entic al to thos e u sed in th e or i gi n al
ci rcu its. S er v i ce sho ul d b e p er for m ed by qu alif ied p ers on nel
on ly.
2. Alte r ation s of the desi g n or circui tr y of t he prod ucts s h oul d not be
made. Any design alterations or additions will void the
manu fac t urer 's warra nt y and will f urth er r el i eve t he ma nufac tu rer
of r esp onsib ili ty for per s o na l injury or pr operty d am ag e res ul t ing
th erefr om.
3. M an y el ectr i cal an d mech anic a l p ar ts i n th e pr od uc ts ha v e
special safety-related chara cteristics. T hese characteristics are
oft en no t e vi den t f r om v i sua l insp ecti on nor ca n t he pro tect io n
aff orde d by th em nece ssarily be ob tain ed b y u s in g r ep l ac em en t
com po nents rated for hig he r vo l tag e, watt age, etc . R ep lac em en t
p arts whic h have th ese sp ecial s afet y ch ar act erist ics ar e
ide ntified in the parts list of Ser vic e manua l. El ectric al
components having such features are ide ntified by shading
on the sche mat ic s and b y (
manual. The us e of a sub sti tu te r ep lac em en t which do es n ot
h ave th e sam e s af ety c h ar ac t erist ics as t he reco mmen ded
replac ement par t sh ow n i n th e parts list of Ser v i ce man ual m ay
cause shock, fire, or other hazards.
!!!!
) on the parts list in Service
4. Don't shor t between the LIVE s ide ground and ISOLATED
(NE UTRAL) side ground or EARTH side ground when
repairing.
Some model's power circuit is partly different in the GND. The
diff erenc e of th e G ND i s sho wn b y th e LIVE : (") side GND, the
ISO LATE D(N EU TR AL) : (#) si de G ND and EART H : ($) side
GND. D o n't sh ort b et ween th e LIV E s i d e GND an d
ISO LATE D(N EU TR AL) si de GND or EAR TH side GN D an d
n ever mea sure w it h a mea sur i ng a ppa r atus ( osci l lo scop e etc.)
th e LI VE sid e GN D an d IS OLA TED(NE UTRAL ) s ide G ND or
EARTH sid e GND at the s ame time.
If above not e will not be kept, a fuse or any parts will be broken.
5. If any repair has been made to the chassis, it is recommended
th at t he B1 set ting shou l d b e c h ec ked or adju ste d ( Se e
ADJUSTM ENT OF B 1 POW E R SUPPLY).
6. The hi gh vol ta ge app lie d t o th e pi ctu r e tu be mu s t c on form with
th at sp ecifi ed i n S ervi ce man ual . E xc essi ve h i gh volt ag e c a n
cau se an i ncr e ase i n X- R ay em iss i on , arci ng an d possi b le
component damage, therefore operation under excessive high
voltage conditions should be kept to a minimum, or should be
preve nt ed. If s ever e arc ing occur s, r emov e t he AC power
immed iate l y and de ter m i ne th e ca us e b y vi sua l insp ec t ion
(incor r ec t in stal lat i on, cr ac ke d or melte d hi gh vo lt age harn ess,
p oor so ld er ing, et c.) . T o m ai nt ain the prope r mi n imu m le vel of
sof t X- R ay em iss i on, c omp on en ts i n th e hi gh voltag e c i r cuitr y
incl ud i ng t he pict ure tu be must be t he e xact r ep lacem e nts or
alte rn at ives ap pr ove d b y th e manuf ac t urer of th e c omplet e
prod uct.
7. Do not c hec k hi gh volt ag e by dr aw i ng an arc. Use a hi gh volt age
meter or a hig h v oltag e pr ob e wit h a V TVM . Discha rg e th e
picture tube before attempting meter connection, by connecting
a cl i p le ad to th e gr ou nd f rame and conn ecti n g th e oth er end of
the lead through a 10kΩ 2W resi sto r to the anod e butt on .
8. When se r vic e is r equ ire d, ob serve th e or i gina l lea d dr ess. E x tr a
prec aut i on sh ou ld b e given t o assur e cor r ect l ea d dress in th e
high vol tag e circui t a rea. W her e a s hor t c i r cuit h as occ u rr e d,
th ose co mpon ent s tha t indica te evide nce of ove r hea ting should
b e r e place d. A lways u s e th e manuf act ur er 's rep lacem ent
components.
9. Isol ation Check
(1) Dielectric Strength Test
(2) Leakage Current Check
(Safety for Electrical Shock Hazard)
Af ter r e- ass embl in g th e p r odu ct, always per f orm an i solat io n
ch eck on the expo s ed me tal p ar ts of t he cabin et ( a nte nn a
ter m i na ls, vid eo /au dio i npu t and outpu t t ermi n al s, C on trol kn obs,
metal cabin et, sc r ew he ad s, ea rph one j ack, con tr ol s haf ts, etc.)
to be su re th e p r odu ct is s af e t o o pe rate with ou t d an ger of
elect rical shoc k.
The iso lation be tw een the AC pr im a ry ci rcu it an d al l me tal p arts
exp osed t o the us er, p ar ticular ly an y e xpos ed met al p art having a
retu rn p ath to t he c hass is sho uld withs tan d a vol t age of 3000 V
AC (r.m. s.) for a period of one sec ond.
(. . . . W it hstan d a v o lt age of 110 0V A C (r .m. s.) t o an ap plianc e
rate d up to 12 0V , an d 3 00 0V AC ( r.m. s.) to an ap pl i an c e r at ed
200V or more, for a period of one second.)
This meth od of test r equi res a test equipment n ot g enerall y fou nd
in t he serv ic e trad e.
Plug th e AC l in e c ord d irect ly into the A C ou tlet ( d o not use a lin e
isol ati o n transf orm er du r ing this ch eck.). U sin g a " Lea kag e
Current T este r", me as ur e th e l ea k ag e cu rr e nt f rom eac h ex p os ed
metal p ar t of the cabine t, p art icu lar ly any e x pos ed me tal p art
h aving a re turn pa th to the ch assis , to a kn own go od ea rt h
grou nd (w a ter pip e, e tc.). An y l eaka ge c ur r en t must n ot e xceed
0.5mA AC (r.m.s.).
Howev e r, in trop ic al ar ea , th is mu st no t ex ce ed 0.2 mA AC
(r.m.s.).
""""
Alte rn at e Che ck M et hod
Plug th e AC l in e c ord d irect ly into the A C ou tlet ( d o not use a lin e
isol ati o n tran sfor m er dur i ng this c he c k.). Use an AC vo lt meter
h aving 1 00 0 oh ms pe r vol t or mor e s ens it i vity i n th e fo llowi ng
mann er . C on nec t a 1 50 0Ω 10W res ist or par a lle le d b y a 0 .1 5µF
AC-type c apa cit or bet ween an expo sed met al pa rt and a kno wn
g ood e ar th gr o und (water pi pe , etc.) . M eas ur e th e A C volt ag e
acr os s th e res ist or wi th th e AC vo l tm eter. Move th e r es i stor
con nec tion to e ach exp ose d me tal part, p art i cularly any exp osed
metal p ar t havi n g a r etu rn pat h to the ch assis, and m easu r e th e
AC vol tag e ac ros s the res ist or. No w , re v er se th e pl u g in th e AC
ou tl et and re pe at eac h mea suremen t. An y vol t ag e me asu re d
must no t e xc eed 0 .7 5V AC (r.m. s.) . This c orre spo nds to 0 .5mA
AC (r.m. s.).
Howeve r, in tropica l area, this must n ot exce ed 0 .3V AC ( r .m.s.).
This corresponds to 0.2mA AC (r.m.s.).
AC VOLT MET ER
(HAVING 1000 Ω /V,
OR MOR E SENSIT IVITY)
0.15μF AC-T YPE
PLACE THIS PROBE
1500 Ω 10W
GOOD EARTH GROUND
ON E A C H EX PO SE D
ME T AL PA RT
4
No.51945
Page 5
A
A
A
FEATURES
V32H20EUS
V28H20EUS
V28H20EUB
"
New c hassi s d esign ena bl e us e of an inte rac tive on screen
control.
"
The TELETEXT SYSTEM has a built-in FASTEXT (UK system),
TOP (Germ an syst em) and W ST (world stan dard system)
system.
"
Be caus e th is TV un i t corr esp on ds t o m ultipl e x br oa dca s t, u ser s
can enjoy music programs and sporting events with live realism.
In ad dition , BI LIN GU AL pro gr am s can be h ear d in th ei r or i g in al
language.
TVEXT-1EXT-3
EXT-2
"
Users can make VCR dubbing of picture and sound by controlling
th e AV sel ec tor to s e le c t an o pti o na l so urc e at th e EXT- 2 outp ut
sh own i n figu re.
EXT-4
MAIN DIFFERENCE LIST
Model Name
!
Par t Name
MAIN PWB ASSYSMF-1401A-U2SMF-1402A-U2
POWER & DEF PWB ASSYSMF-2401A-U2SMF-2402A-U2
CRT SOCKET PWB ASSYSMF-3401A-U2SMF-3402A-U2
FRONT C ONT ROL PW B ASSYSMF- 84 01A- U2SMF- 8402 A- U2
!
FRONT C AB I NET A SS YLC10 376- 020A -ULC 1066 2-02 3A-ULC 1066 2-02 4A-U
2. Rem ov e t he 12 (28 ” m od el s), 13 ( 32 ” m ode l) scr ews ma r ked A
as s hown in t he F i g. 1.
3. Withdr a w t he r ear co ver to wa rd you .
REMOVING THE CHASSIS
"
After removing the rear cover.
1. Sli ght ly rai se th e bo th si de s of the c hass i s by h and and r e mo ve
th e two c l aws u nd er th e b oth sid es of the chass i s fr om t he fro nt
cab inet .
2. Withdr a w t he chass is backw a rd .
(If necessary, take off the wire clamp, co nnectors etc.)
REMOVING THE SPEAKER
"
After removing the rear cover.
1. Remove t he 2 scr ew s m ar ked B, and r em ove th e sp eake r hold er
as s hown in Fi g. 1.
NOTE : When r em oving t he sc r ew s marked B of t he sp eake r
remove t he lo w er side sc r ew fi r s t, an d t hen remove th e
up per one .
2. Remove the 2 screws C a ttac hing th e sp eak er.
3. Fol l ow th e s am e st eps wh en rem oving the oth er ha nd spe ake r.
REMOVING THE AV TERMINAL BOARD
" After removing the rear cover.
1. Remove the 3 scr ew s m ar ked D as shown in t he F ig. 1 .
2. Remove the 2 cla ws mark ed E under the CHASSIS as shown in
Fig. 2.
3. Remove the AV TERMINAL BOARD slightly in the direction of
arrow F as shown in Fig. 2.
REMOVING THE POWER & DEF PWB
" After removing the rear cover.
"
After removing the rear CHASSIS.
1. Remove the 3 scr ew s marked G .
2. Rem ove the PO WER & DEF PW B.
CHECKIN G THE PW BOARD
To c h ec k the back s i de of th e PW B oard.
1) Pull out the ch assis. ( Refer to REMOVIN G TH E CH AS SIS ).
2) Erect the c hassis vertically so that you c an easily check the
b ack side of the PW B oard.
[CAUTION]
"
When erecting the chassis, be careful s o that there will be no
con tact ing with ot her PW Boar d.
"
Be fore tur n ing on po wer, ma ke sur e tha t the wire co nnecto r is
prop er l y con nected .
"
W hen co ndu cti ng a c h ec k wi th p ow er su pplied , b e sure to c onfir m
th at t he CRT E AR T H WI RE (B RAIDED AS S’Y) is co nne c ted t o
th e C R T SOC KE T PW b oard.
WIRE CLAMPIN G AND CABLE T Y ING
1. Be sur e t o clamp th e wire.
2. Never r em ove th e c able tie use d f or tying th e wires to ge the r.
Should it be inadver t ent ly removed , b e sure to tie th e wires wi th
a n ew c able tie.
AV SW PWB
AV TERMINAL
BOARD
E
E
Fig . 2
6
No.51945
Page 7
A
A
A
FRONT CABINET
(
)
(×3)
(
)
(
)
FRONT
C ONT RO L
PWB(1/2 )
CRT
SOCKET
PWB
FRONT
C ONT RO L
PWB(2/2 )
V32H20EUS
V28H20EUS
V28H20EUB
B
×
2
SP EAKER
C
G
×
3
×
2
MICOM PWB
100Hz PWB
POWER & DEF.
PWB
CLAW
REAR COVER
AV TERMINAL
BOARD
AV SW
PWB
CLAW
MAIN
PWB
CHASSIS
D
POWER CORD
Thi s expl o de d vi ew des cribe s ab out
AV 28H2 0EUS / AV28 H20EUB.
Alth ou gh AV 32 H 20E US are sl i ght ly
diff erent from t his f ig ur e, you c an use
th e e xpl od ed vi ew f or disass em bl i ng
th e A V32 H 20E U S in sam e ste p as
AV 28H2 0EUS / AV28 H20E UB.
(×12 : 28” mod el s)
A
(×13 : 32” mod el )
Fig . 1
No.51945
7
Page 8
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
REMOVING THE CRT
∗
Replacem en t of th e CRT s ho ul d be p er for m ed b y 2 or mor e
p ers ons.
• After removing the cover, chassis etc.,
1. Putti ng the CRT chan ge table o n sof t cl oth , th e C R T cha nge ta ble
sh ould al so b e c over e d w i th s uch soft clot h (s ho wn i n Fig. 3) .
2. W hile kee pin g the s urfac e of C RT down , mou nt the TV s et o n t he
CRT change table balanced will as shown in Fig.4.
3. R em ov e 4 sc rews mark e d by arro ws with a box ty p e scr e w dri ver
as s hown in Fig. 4.
• Si nc e the cab i net will drop w h en scr ews h ave b een rem o ve d, be
sure t o su pp ort t he cabinet with hands.
4. After 4 screws have been removed, put the cabinet slowly on
cloth (At th is time, be ca refully so as not to damage th e front
sur fac e of th e c abin et) s h ow n i n Fig.5 .
• The CRT sh ould b e ass embled accor di n g to th e o pp osi te
sequence of its dismounting steps.
∗
The C RT cha ng e t able sh ould pr ef erab ly b e smaller that th e CRT
sur fac e, and its h ei gh t be abo ut 35c m.
CRT CHANGE TABLE
AP PROX.
35 cm
CLOTH
Fig. 3
CRT
CRT
CHANGE
TABLE
BOX
TYPE
SCREW
DRI VER
CABINET
Fig. 4
CRT
CRT
CHANGE TABLE
Fig. 5
8
No. 51945
Page 9
A
A
A
REPLACEMENT OF CHIP COMPONENT
! CAUTIONS
1. Avoid heating for more than 3 seconds.
2. Do n ot ru b the elect ro des an d the r esist p arts of the p att ern.
3. W hen r em oving a chip par t, mel t th e s older ad equately.
4. Do n ot reuse a ch ip p ar t afte r re mo v ing it .
! SOLDERING IRON
1. Use a hig h i ns ulatio n s ol der i ng i r on with a thi n poin ted e nd of it.
2. A 3 0 w s older i ng iron is r ec ommend ed for easily r em oving p ar ts.
!
REPLACEMENT STEPS
1. How to remove Chip parts
####
Resi st o rs, capacitors , etc
(1) As sh own in the f ig ur e, pu sh th e pa rt w ith tw ee zer s and
alte rn at ely melt the s ol de r at eac h end.
(2) Sh if t with tweeze rs and r em ove th e c h i p p art.
#### Tran s istor s, diodes , variabl e r esistor s, etc
(1) Ap pl y e xt ra so ld er to eac h le ad .
SOLDE RSOLDE R
V32H20EUS
V28H20EUS
V28H20EUB
2. How to install Chip parts
####
Resi st o rs, ca pacit ors , etc
(1) Apply sold er to the pattern as indic ate d in the figure.
(2) Gr asp the c h i p p art with tw ee zer s and pl ac e it on th e s old er.
The n hea t and me lt th e so lder a t both ends of t he chi p part.
#### Tran s istor s, diodes , variabl e r esistor s, etc
(1) Apply sold er to the pattern as indic ate d in the figure.
(2) Gr asp th e ch ip p art wit h t we ezers an d pl ac e it on th e so l der .
(3) First s older lead A as i ndica ted in the fi gure.
A
(2) As sh own in the f ig ur e, pu sh th e pa rt w ith tw ee zer s and
alte rn at ely melt th e sol d er at each le ad . S hi ft an d r em ove the
chip part.
(4) The n so lder le ads B and C.
Note : A fte r re moving t he part, r emove rem ain ing solder fr o m the
pattern.
C
A
C
No.51945
B
B
9
Page 10
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
REPLACEMENT OF MEMORY ICs
1. Memory ICs
This TV use memory ICs. In the memory ICs, there are memorized data
for correctly op er atin g th e video an d def l ection circ u its . Wh en r ep lac i ng
memory ICs, be s ure t o us e IC s wr itte n with the i ni tial values of da ta.
2. Procedure for replacin g memory ICs
PROCEDURE
(1) Power off
Switch the p ow er of f and un plug th e pow er cor d f ro m t he ou tlet.
(2) R epla ce ICs.
Be sure to use memory ICs written with the initial data values.
(3) Powe r o n
Plug th e pow er c ord int o th e outl et a nd s wit ch t he powe r on .
(4) Check and s et SY STEM CONSTANT SET :
It must not adjust wit hout s ign al.
****
1) Pr es s th e INFO RMATI ON ke y and the MUT ING key of th e
REMO TE CONTROL UNIT simultaneous ly.
2) The SERVICE MENU screen of Fig. 1 will be displayed.
3) W hile th e S ERVICE ME NU is d is playe d, pr es s th e
INFORMATION key and MUTING key s imultaneously, and the
SYSTEM CONSTANT SET screen of Fig. 2 will be displayed.
4) Check th e se tti ng va lu es of the S YSTEM CONSTA NT SET of
Table 1. If the valu e is dif fere nt, sel ect th e s etting item with th e
FUNCTION UP/ DOWN ke y, and s et the corr ect va lue with th e
FUNCTION -/+ ke y.
5) Press the MENU key to memorize the setting value.
6) Pr ess t he IN F OR M ATION ke y t wice, a nd r etu rn t o th e no rmal
screen.
SE RV ICE MEN U
1. IF2. V/C
3. A UDI O4. D EF
5. VSM P RESET 6. S TAT US
7. P IP8. ---
9. SHIPPING (OFF) 0. BUS FREE
1 -9 : SE LE CT
SYS TE M C ONS TA NT S ET
1. DESTINATION EU
- /+: STORE i : EXIT
OK
Fig.1
Fig.2
i
: EXI T
NAME OF REMOTE CONTROL KEY
(5) Se tt in g of re ceive chann e ls
Names of key
ke y
Se t th e r ec eiv e ch anne l.
For setting , r ef er to the OPE RATING INS TRUCTIONS.
(6) U ser se tting s
INFORMATI ON
MU T I N G
iiii
Check th e us er s ett ing values of T ab le 2, and if sett in g value is
diff erent , set th e c orrec t val u e.
For setting , r ef er to the OPE RATING INS TRUCTIONS.
(7) Setting of SERVICE MENU
Ve rif y the set ting it ems of the SE R VICE ME NU of Tab l e 3, and rese t
ME NU
FUNCTION UP/ DO WN
OK
▼
▼
where n ecessary.
For setting , r ef er to the SE RVIC E ADJUSTMENTS.
FUNCTION -/+
▼
▼
10
No. 51945
Page 11
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
SETT ING VALU ES OF SYST EM CO NS TANT SE T (TABLE 1)
Setting itemSetting contentSetting valueSetting itemSetting contentSetting value
DESTIN A TIONEUDOLB YNO
CRT TYPE16:9BBEYE S
EKEUEI
4:316 :9
YE SNO
YE SNO
PURITYNOPROGRESSIVENO
PICTURE TILTYESTDA9178NO
DIGIP URE PRONOTONE ICNO
PIPNOFLATYE S
PIC&TE XTNO
1TUNERNO
NO
YE SNO
YE SNO
YE SNO
2TUNER
YE S
NO
YE SNO
YE SNO
YE S
YE SNO
USER SETTING VALUES (TABLE 2)
PICTURE SE TTINGEXT SET TI NG
TINTCOOL
CONTRAST / BRIGHT
SHAR P / COLO UR
PICTURE FEATURESFEATURE S
DIGITAL VNRAUTO
COLO UR S YSTE MT V : Acco rd in g t o pr eset CH
4:3 AUTO ASPECTPA NORAMIC
SOUND SET TINGINSTALL
BA SS / T REBL E / BALANCELANGUAGEENGLISH
HYPE R S OU ND
BB E
REFER to VSM PRESET
EXT : AUTO
CENTER
OFF
ON
ID
S-IN
DUBBING
SLEEP TIMER
BLUE BA CK
EDIT/MANUALPRESET CH only
BLANK
BLANK
EXT- 1→EX T-2
OFF
ON
The others : BLA NK
SERVICE MENU SETING ITEMS (TABLE 3)
Setting itemSetting valueSetting itemSetting value
1. IF
2. V / C
3.A UD IO
(Do not adjust)
9.S HIPPI NG
(Do not adjust)
1. V CO
2. ATT ON /OFF
1. RGB BLK
2. W D R R
3. W D R G
4. W D R B
5. BRIGHT
6. CONTRAST
7. COLO UR
8. HUE
9. SHAR P
10. VC O A DJ .
11 . VID AGC
12 . SY C SL I
13 . A M OV I E
1. ER R LI MIT
2. A2 ID THR
3. Q-PEA K
ON/OFF
4. DEF.
5. VSM P RESET
COOL
NORMA L
WARM
6.S TATUS
(Do not a dju st)
1. V-SHIF T
2. V-SIZE
3. H-CENT
4. H-S IZ E
5. TR APE Z
6. EW - PIN
7. COR-P IN
8. COR-UP
9. COR-LO
10. ANGLE
11 . BOW
12. V-S.CR
13 . V- LIN
1. CONT.
2. BRIGHT
3. SHAR P
4. COLO UR
5. HUE
6. W D R R
7. W D R G
8. W D R B
VP S
PDC
**** : Do not adjust
No. 51945
11
Page 12
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
SERVICE ADJUSTMENTS
BEFORE STARTING SERVICE ADJUSTMENT
1. Ther e ar e 2 w ays of ad ju st in g this TV: One is wi th t h e
REMOTE CONTROL UNI T and the other is the conventional
method using adjustment parts and components.
2. The setting (adjustment) us ing the REMOTE CONTROL
UNIT is made on the ba sis of th e initial se tting values . Th e
se tting va lu es whic h adjust the sc ree n to the o p t imum
condition can be different from the initial setting values.
3. M ak e s ure th at conn ect i on i s c orrec t ly ma de t o AC p ower
source.
4. T ur n on th e powe r of th e TV a nd m easu r in g i nstr um en t for
warmin g up f or at least 30 min ut es bef ore sta rt in g adju stm ent .
5. If th e r ec ei ve or i np ut sig nal is not sp eci fi ed , use t he m ost
ap pr op ri a te s ig na l f or a dj ust me nt.
6. Nev er tou ch p ar ts ( s uch as var i ab le r es ist ors, tr an s for m er s an d
condensers) not shown in the adjustment items of this service
adjustment.
7. Pr ep ar atio n f or ad j ustm en t (pr es etti n g) :
Unles s oth erw is e sp eci fi ed in th e a dj us t ment it em s , p res e t th e
follo win g fu nct ions with th e REMOTE CONTROL UNIT.
"
Setti ng positi on
PICTURE MODE (VSM)NORMAL
SLEEP TIMEROFF
TONE BALAN CECENTER
ZO OMFULL
MEASURING INSTRUMENT AND FIXTURES
1. DC voltmet er (or digit al voltmeter)
2. Oscilloscope
3. Si gn al g en erat or (Patt er n g en er at or) [ PAL / SE CA M / N TSC]
4. Remote control unit
ADJUSTMENT ITEMS
●
Check ing i t ems.
●
Adjustm en t of FOCU S & SC R EEN
●
VS M p r es et adju st s etti n g.
●
VIDEO / CHROMA circ uit adjustment.
●
DEFLECTION c ircuit adjustment.
●
AUDIO circuit adjustment. (Do not adjust)
12
No. 51945
Page 13
A
A
A
ADJUSTMENT LOCATIONS
(
)
5
)
)
FRONT
FRONT CONTROL PWB (1/2
REMOCO NLED
F90 1POWER SW
PW
CN002
FRONT CONTROL PWB (2/2
JJ
UP DOWN
SP R
VLHPR
F
SP L
V32H20EUS
V28H20EUS
V28H20EUB
S
FRONT
AV SEL PW B
MAIN PWBPOWE R&DE F PWB
CN001
TUNER
CN002
MIC OM
100Hz
CN013
WDEG
CN004
CN005
HV
CN006
CN014
FRONT
HVT
X
1
CRT SOCKET PWB
TP-E
SOLDER SIDE
T P- 47B
TOP
E1
FOCUS
SCREEN
1pin:B1( TP-91)
2pin:NC
3pin:X-ray
4pin:X-ray
5pin:T P-E
28"MODEL
FOCUS 1
FOCUS 2
CN014
CN013
TP-Y
32"MODEL
No. 51945
SCREEN
13
Page 14
A
V32H20EUS
A
A
y
y
V28H20EUS
V28H20EUB
BASIC OPERATION SERVICE MENU
1. TOOL OF SERVICE MENU OPE RATION
Operate the SERVICE MENU with the REMOTE CONTROL UNIT.
2. SE RVICE MENU ITEM S
With the SERVI CE MENU, var i ou s sett ings ( ad ju s tm en ts) c an b e m ade , a nd th ey are b r oad ly classif i ed i n th e f ol lowing ite ms of set tings
(adjus tments ):
(1) 1. IF ・・・・・・・・・・・・・・・・・・・・ ・・・ This m ode adjust s the se tting values of the IF circu it.
(2) 2.V /C ・・・・・・・ ・・・・・・・・・・・・・ ・・ This m ode adjust s th e se tti ng valu es o f th e VIDEO / CHROMA circu it.
(3) 3.AUDIO・・・・・・・ ・・・・・・・・・・・・ This mode adjusts the setting values of the multiplicity SOUND circuit.
(4) 4. DEF ・・・・・・・ ・・・・・・・・・・・・・・ T his m ode adjust s th e setti ng valu es o f th e DE FLECTION ci r c ui t f or eac h as pect m od e gi ven be lo w .
FULL (100/120Hzi)
PA NO RA MIC ( 100 /12 0H z i )
SUBTITLE (100/120Hzi)
COMP RE SS (F ixed va lu e) (100 /1 20Hzi)
(5) 5.V SM PR ESE T
(VSM : Video Status Memory)
3. BASIC OPERATION OF SERVICE MENU
(1) Ho w to enter SERVICE MENU
Press the “INFORM ATI ON” key and th e “MUT ING” ke y of the
REMO TE CONTROL UNIT simultaneous ly, and the
SERVICE MENU screen of Fig.1 will be displayed.
(2) Selection of SUB MENU SCREEN
Press one of keys 1~5 of the REMOTE CONTROL UNIT
an d sele ct th e S UB MENU SCREEN (See F i g. 3 ), fo rm the
SERVICE MENU.
SERVICE MENU → SUB MENU
・・・・・・・ ・・・・・・
1. IF
2. V / C
3. AUDIO
4. DEF.
5. VSM PRESE T
6. STATUS
7. PI P
8. ---
9. SHIP PING (OFF )
0. BUS FREE
Thi s m od e adjust s th e in iti a l s ett in g va l ues of CO OL, NORMAL an d WAR M .
SE RVICE MENU
SE RVIC E ME N U
1. IF2. V/C
3. AUDIO4. DEF
5. VS M PRES ET6. ST ATU S
7. PIP8. ---
9. SH I PP I NG (OF F) 0 . BUS F R EE
****
: Do not adjust
1- 9 : SEL ECT
NAME OF REMOTE CONTROL KEY
Names of ke
INFORMA TION
MU T I N G
ME N U
FUNCTION UP/DOWN
FUNCTION -/+
Fig.1
Fig.2
i
: EXI T
ke
iiii
OK
▼
▼
▼
▼
14
No. 51945
Page 15
A
A
A
SE RVICE MENU
SERVICE ME NU
1. I F2. V /C
3. AUDIO4. DEF
5. VSM PRESET6. STATUS
7. PIP (O FF)8. - - -
9. SHIPPING (OFF) 0. BUS FREE
1-9 : SELE CT: E X ITi
V32H20EUS
V28H20EUS
V28H20EUB
1. V- SHIFT
2. V- SIZE
3. H-CENT
4. H-SIZE
5. TRAPEZ
6. EW -PIN
7. COR-PIN
8. COR-UP
9. COR-LO
10. A NGLE
11. B OW
12.V- S.C R
13.V-LIN
DE F *** Hz FULL
1. V- SHIFT
: STORE i : EXIT
OK
- / +
4. DEF
***
1.IF(VCO)
IF SER VICE M ENU
1. VCO
2. ATT ON/ O FF
1-2 : SELECT i : EXIT
2. V/C
PAL
****
1. RGB_BLK
OK
- / +
V/C
: STORE i : EXIT
Do no t move
1. RGB BLK
2. WDR R
3. WDR G
4. WDR B
5. BRIGHT
6. CONTRAST
7. COLOUR
8. HUE
9. SHARP
10. VCO ADJ
11. VID AGC
12. SYC SLI
13. A MO VIE
COOL
NORMAL
WARM
1. CONT.
2. BRIGHT
3. SHARP
4. COLOUR
5. HUE
6. WDR R
7. WDR G
8. WDR B
5. VSM PRESET
VSM PRESET NORMAL
1.CONT
OK
- / +
: STORE i : EXIT
***
- / +
Fig.3 SUB MENU SCREE N
No. 51945
3. AUDIO
AUDIO
1. ERR LIMIT 100H
ERROR RATE =
OK
: STORE i : EXIT
* ** *** **
Do no t adjust
1. ERR L IMIT
2. A2 ID THR
3. Q P EAK
15
Page 16
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
(3) M eth od of Set ting
1) Meth od of Set ting 1.IF
[VCO] ・・・・・・・ ・・・・・・・・・・・・・ ・・・・・・・・・・・・ ・・・ It must n ot adjust witho ut signal.
① 1 K ey・・・・・・・ ・・・・・・・・・・・・・ ・・・・・・・・・・・・ Select 1.IF.
② 1 K ey・・・・・・・ ・・・・・・・・・・・・・ ・・・・・・・・・・・・ Sele ct 1.VCO(CW)
Make sure that the arrow position between the ABOVE REF and BELOW REF.
③ INFOR MAT ION Key ・・・・・・・ ・・・・・・・・・・・・ Return t o th e SERVICE MENU screen.
2) Meth od of s ett in g 2.V/C, 3.AUDI O, 4.DEF and 5 .VSM PRESET.
① 2 ~5 K ey・・・・・・・・・・・・・・・・・・・・ ・・・・・・・・・ Select one from 2.V/C, 3.AUDIO, 4.DEF an d 5.VSM PRESET.
②
FUNCTION UP / D OWN ( / ) Key
③
FUNCTION - /+ ( / ) Ke y
④
ME NU K ey
⑤
INFORM ATION K ey
・・・・・・・ ・・・・・・・・・・・・・ ・・・・・・・
・・・・・・・ ・・・・・・・・・・・・
・・・・・・・ ・・・・・・
・・・・・
Select s etting items.
Set ( ad just) th e se tting values of the settin g items.
Memorize th e s etting value.
(Bef ore st orin g t he sett in g values in m emor y, do not pres s th e C H , T V, POWE R ON /
OFF k e y - if you d o, the value s will n ot be s tor ed in me mo r y. )
Retu rn t o the SE R VICE ME NU scr een.
3) Do not setting 6.STATUS , 7.PIP, 8.--- , 9.SHIPPING(OFF) & 0.BUS FREE.
(4) R ele ase o f SER V ICE M ENU
1) Af ter co mpl eti ng the s e tting , ret urn t o t he SERVICE ME NU, then agai n p ress th e I NFOR M ATIO N ke y.
16
No. 51945
Page 17
A
A
A
ADJUSTMENTS
y
CHECK ITEM
Item
B1
Powe r Suppl
che ck
Measuring
instrume nt
Signal
generator
DC v oltm et er
Remote
control unit
Test pointAd justment partDescription
TP-91(B1)
TP-E(####)
[X connector
on POWER
DE F PW B ]
1.R G B BL K1. Rec ei ve a an y broa dca st.
2. Pu sh t he “ZOOM ” k e y an d s elec t the FU LL mode .
3. Se lect 2. V/ C from the SERVICE MENU.
4. Se lect 1. RGB BLK with f un cti on UP / DOWN ( / ) key.
5. Press the function + ( ) key to find th e cut off screen (Bla ck
screen).
6. Con nect a D C voltmet er t o TP- 9 1(B 1) a nd TP-E( #).
7. Make sure t hat th e volt age is D C 13 9.9 ±2.0V.
8. Pr ess the function – ( ) key t o retu rn to service menu..
V32H20EUS
V28H20EUS
V28H20EUB
Hi gh Vo l t ag e
che ck
Signal
generator
DC volunteer
Remote
control unit
VCO chec kRemo t e
control unit
IF S ERVICE MEN U
1. VCO
2. ATT ON/OFF
1-2 : SELECT
TO O HI GH
ABOVE REF
JUST REF
BELOW REF
TO O LO W
VCO(CW)
MAI N
CRT anode
Chass is
GND
i : EXIT
****
MHz
i : EXIT
1.R G B BL K1. Rec ei ve a an y broa dca st.
2. Pu sh t he “ZOOM ” k e y an d s elec t the FU LL mode .
3. Se lect 2. V/ C from the SERVICE MENU.
4. Se lect 1. RGB BLK with f un cti on UP / DOWN ( / ) key.
5. Press the function + ( ) key to find th e cut off screen (Bla ck
screen).
6. Connect a DC voltmeter t o CRT ANODE and chassis GND.
7. Make sure t hat th e volt age is D C 3 1.0kV .
8. Pr ess the function – ( ) key t o retu rn to service menu.
1. VC O
"
U nd er n orma l c ondi tions , no ad just ment is r e quir ed .
" Conf irm at ion a dj ust me nt.
1. Se lect 1.IF f rom the SERVICE M ENU .
2. Then se lect 1.VC O fr om th e IF S ERVICE MENU.
3. Recei ve an y bro adc ast.
←←←←
) p ositi on be tween th e AB OVE REF . an d
(Do not move)
4. Chec k t he arrow (
BE LOW REF.
+1kV
-1.5kV
No. 51945
17
Page 18
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
FOCU S & SCREEN ADJUSTMENT
Item
FOCUS
adjust me nt
[28” M ODEL]
Measuring
instrume nt
Signal
generator
HVT
Test pointAd justment partDescription
FOCUS VR
SCREEN VR
FOCUS VR
[In HVT]
[28”MODEL]
1. Recei ve a cross -hatc h sign al .
2. Press the “ZOOM” ke y and select the FULL mode.
3. While watc hing th e scr een, a dj us t th e F OC US VR to m ak e th e
ver tic al and hori zo nta l l in es as f in e a nd sha rp as possib le.
4. Make sure th at when the sc re en is dar k e ned , the li nes r e mai n
in good focus.
FOCUS
adjus tme nt
[32” M ODEL]
SCREEN
Ad j ust men t
Signal
generator
FOCUS 1
HVT
Signal
generator
1. RGB BLK
- / +
OK
0 0 0 0 0 1 0 0
FOCUS 2
V/C
: STORE i : EXIT
PAL
00
FOCUS2(F2)
FOCUS1(F1)
SCREEN1(S1)
FOCUS 1
FOCUS 2
[In HVT]
SCREEN VR
[In HVT]
CLOW
status
[32”MODEL]
1. Rec ei ve a cross - h atch signa l.
2. Pu sh t he “ZOOM ” k e y an d s elec t the FU LL mode .
3. By turnin g th e FOCU S2 VR , and a djust t he pict ure s o tha t th e
“ “ part vertical lin e may become thinnest.
4. By turnin g th e FOCU S1 VR , and a djust t he pict ure s o tha t th e
3rd h or i zont al line fr om the upp er m ay bec ome un i for m at th e
line c ent er an d its periph ery.
5. Carry out adjustm ent b y rep eat in g the ste ps 3 an d 4 ab ove .
6. Make sure th at when the sc re en is dar k e ned , the li nes r e mai n
in good focus.
1 Pr ess a wh ol e b la c k s i gn al
2 Press the “ZOOM” key and s elect the FULL mode.
3 Se lect 2 . V/ C from th e SERVICE MENU.
4 T ur n t he SC REEN V R c l ockw is e f r om th e f ul l co unt er
cl ockw is e pos i ti on and st op i t a t th e po i nt w h ere “ C LOW ” stat us
(mark e d i n F i g.) c h ang es f rom 1 t o 0 to 1 ( which i s
ind icated at th e 3 rd colu mn from the right.)
5 The n turn th e SCREEN V R cou nt erclo ckwis e, an d st op wher e
th e “ C LOW ” stat us ch anges 1 t o 0
* “CLOW ” : c ontr o l l oop ou t of w indo w.
SERVICE MODE SCREEN
18
No. 51945
Page 19
A
A
A
VSM PR ESET AD JUST SET TIN G
g
Item
VS M PRESET
se tting
COOL+160-10+10-27-120
Measurin
instrume nt
Remote
control unit
1.CONT.2.BRIGHT3.SHARP4.COLOUR5. HUE6.WDR R7.WDR G8.WDR B
Test pointAd justment partDescription
1. C ONT .
2. BR I G HT
3. SHARP
4. COLOUR
5. HUE
6. W DR R
7. W DR G
8. W DR B
V32H20EUS
V28H20EUS
V28H20EUB
1. S elect COOL with the MENU key of the remote control unit.
2. Selec t 5 .VS M P RESET from th e S ERVICE ME NU.
3. Ad just t he FUNCTIO N UP/DOWN ( / ) and -/+ ( / )ke y to
bring th e set va l ues of 1.CONT ~ 8. W DR B to the val ues
sh own i n the ta bl e.
4. Pr ess the ME NU key a nd m em or iz e the s et va l ue.
5. Respectively s elect the VSM PRESET mode for NORMAL and
WAR M, an d make simi l ar a dj ust me nt as in 3 abo ve.
6. Pr ess the ME NU key a nd m em or iz e the s et va l ue.
* Refer t o OP ERATING I NS TRUC TION S for the PICTURE
MO DE .
32 ”NORMAL00-1000000
WARM-130-12-10+500
COOL+130 -120 0-28-120
28 ”NORMAL-30-1200000
WARM-130-12-10+400
SE TTING VALU ES OF VSM PRESET
No. 51945
19
Page 20
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
VIDEO / CHROMA CIRCUIT ADJUSTMENT
The setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values.
The setting values which adjust the scr een to the optimum condition can be different from the initial setting values.
Setting item
(Adjustment item)
2. V/CPALSE CAMNT SC
1.R G B BL K
2.WDR R00 00
3.WDR G00 00
4.WDR B (Do not adjust)-012
5. BR IG HT00 00
6.CONTRAST0060
7.COL O UR00 00
8. HUE00 20
9.SHARP (Do not adjust)00 07
Initial setting value
10.VCO ADJ. (Do not adjust)
11 .VI D AGC (Do no t adjust)00 00
12.SY C SLI ( Do not adjust)00 07
13.A MOVIE (Do not adjust)0001
****
: Do not adjust
20
No. 51945
Page 21
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
Item
WHITE
BALANCE
(High Light)
adjust me nt
SUB BRIGHT
adjus tme nt
Measuring
instrume nt
Signal
generator
Remote
control unit
Remote
control unit
Test pointAd justment partDescription
2. W DR R
3. W DR G
4. W DR B
(Do not adjust)
5. BR I G HT1. Rec ei ve an y br o adc ast.
" Se t th e P IC TURE MODE to NORMAL.
1. Recei ve a bl ack a nd w hi te sign al (col o ur of f).
2. Se le ct 2.V/C f r om the SE RV IC E M ENU.
3. M odi f y 2. W DR R and 3. WDR G d ata to adjust th e whi te
balance ( high light ).
4. Press the ME NU key a nd m em or iz e the s et va l ue.
5. Change the c ontras t a nd bri gh tnes s wi th th e rem ot e co ntr ol up
& d ow n from low–light to hi g h– light an d ch eck that th e tr acki ng
of th e white ba lanc e is g ood .
2. Se le ct 2.V/C f r om the SE RV IC E M ENU.
3. Se lect 5.BRIGHT with th e FU NCTION UP/DOW N ( / ) key.
4. Set the initial setting value with t he FUNCTION -/+ ( / )key.
5. If th e b ri gh tn ess is no t th e be st wi th th e initial se tti ng val ue ,
make fine adjustment until you get the best brightness.
6. Press the ME NU key a nd m em or iz e the s et va l ue.
SUB CONT.
Ad j ust men t
Remote
control unit
6.CO NT .1. Rec eive any br o adcast.
2. Select 2 .V/C f rom the SE RVICE MENU .
3. Select 6.CONT with the FUNCTION UP/DOWN ( / ) key.
4. Set the initial s etting value with the FUNCTION - / + ( / )
key.
5. If the con tras t is n ot t he best w ith t he i ni tial s e tting va lu e, make
fine adjustment until you get the best contrast.
6. Pr ess the ME NU k ey a nd m emor iz e the s et va lue.
No. 51945
21
Page 22
A
V32H20EUS
A
A
ey
V28H20EUS
V28H20EUB
Item
SUB CO LO UR
adjus tme nt
instrume nt
Remote
ⅠⅠⅠⅠ
control unit
Measuring
Test pointAd justment partDescription
7.COL O UR
(PAL~~~~NT S C)
PAL COLOUR(PAL COLOUR)
CH. key
SECAM COLOUR
MENU
( OK ) k ey
NTSC COLO UR
[Method of adjustm ent without measuring instrument]
1. Recei ve PA L br oadcast.
2. Select 2 .V/C f rom the SE RVICE MENU .
3. Se lect 7.COLOUR with th e FUNCTIO N UP/DOW N ( / ) ke y.
4. Set the initial setting value f or PAL COLOUR with the
FUNCTION - or + ( / ) key.
5. If t he co l our i s no t the bes t with th e in iti al set value, ma k e
fine adjustment until you get the best colour.
6. Pr ess the ME NU k ey a nd m emor iz e the s et va lue.
(SECAM C OLO UR)
1. Recei ve a SECAM b roadc ast.
2. Mak e fi n e a djustme nt of SE CA M C OLOUR in the s ame
mann er as fo r abo v e.
(NTSC 3.58 COLOUR)
1. Input a NTSC 3 .58MHz COMPOS ITE VIDEO sig na l from the
EXT t erminal .
2. Make si milar f in e ad jus tm en t of NT SC 3. 58 COLO UR in th e
sam e mann er as f or a bo ve .
FUNCTION k
( INFORMATI ON ) keyi
REMOTE CONTROL KEY
(NTSC 4.43COLOUR)
1. When NTSC 3.58 COLOUR set, NTSC 4.43 COLOUR will
automatically set.
22
No. 51945
Page 23
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
Item
SUB CO LO UR
adjus tme nt
Measuring
instrume nt
Signal
Ⅱ
Ⅱ
ⅡⅡ
generator
Oscilloscope
Remote
control unit
Test pointAd justment partDescription
TP-47B
####
TP-E(
[CRT
SOCKET
PWB ]
7.COL O UR
(PAL~~~~NT S C)
)
PAL COLOUR(PAL COLOUR)
SECAM COLOUR
[Method of adjustm ent using measur ing instrument]
1. Recei ve a PAL fu ll f i el d co lour b ar s ign al ( 75% whi te ).
2. Select 2 .V/C f rom the SE RVICE MENU .
3. Se lect 7.COLO UR with th e FU NCTION UP/DOW N ( / ) ke y.
4. Set the initial setting value of PAL COLOUR with the
FUNCTION - or + ( / ) key.
5. Con nect th e osc illosc ope be tw ee n TP -4 7B an d T P- E( #).
6. Ad just P AL COLO UR an d br in g th e val u e of (A) in the
illustration to the values as shown giv en billow (Voltage
diff erenc e betwee n wh i te ( W) and blu e ( B) ) .
7. Pr ess the ME NU k ey a nd m emor iz e the s etti n g value.
VOLTAGE (W-B) +5V
(SECAM C OLO UR)
1. Recei ve a SECAM fu ll fi el d colour b ar sign al (75 % white ).
2. Set the initial setting value of SECAM CO LOUR with the
FUNCTION - /+ ( / ) key.
3. Adju s t SE CAM CO LOU R an d b rin g t he va lu e of (A) in t he
illu s tr ation t o th e values as s hown gi ven b ill ow ( Vol t ag e
diff erenc e betwee n wh i te ( W) and blu e ( B) ) .
4. Pr ess the ME NU k ey a nd m emor iz e the s etti n g value.
YG R
WCyMgB
NTSC COLO UR
(A)
(-)
(+)
VOLTAGE (W-B) +4V
(NTSC 3.58 COLOUR)
1. Input a NTSC 3.58MHz COMPOS ITE VIDEO sign al ( fu ll fie ld
colo ur bar with 75% whit e) from th e EXT t erminal.
2. Set th e ini ti al setti ng val ue of N T SC 3.58 COLO UR wit h th e
FUNCTION - /+ ( / ) key.
3. Ad ju st NTS C 3.5 8 C OLO UR a nd bring th e v alu e of (A) in the
illustration to the values as shown giv en billow (Voltage
diff erenc e betwee n wh i te ( W) and blu e ( B) ) .
4. Pr ess the ME NU k ey a nd m emor iz e the s etti n g value.
32” 28”
VOLTAGE (W-B) +5V +6V
(NTSC 4.43COLOUR)
0
1. When NTSC 3.58 COLOUR set, NTSC 4.43 COLOUR will
automatically set.
No. 51945
23
Page 24
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
Item
SUB HUEⅠⅠⅠⅠ
adjust me nt
Ad j ust men t
of
SUB HUE
ⅡⅡⅡⅡ
Measuring
instrume nt
Remote
control unit
Signal
generator
Oscilloscope
Remote
control unit
YGR
Test pointAd justment partDescription
8.HUE[Method of adjustm ent without measuring instrument]
NTSC 3.58 HUE[NTSC 3.58 HUE]
1. Inp ut a NTSC 3.5 8 MH z COMPOSI TE V IDEO sign al (f ul l fi e ld
colo ur bar with 75% whit e) from th e EXT t erminal.
2. Select 2 .V/C f rom the SE RVICE MENU .
3. Se lect 8. HUE wi th t he FUNCTION UP /DOW N ( / ) ke y.
4. Se t the initia l sett in g value of N TSC 3. 58 H UE w i th th e
FUNCTION - /+ ( / ) key.
5. If you cannot get the best hue with the initial setting value,
make fine adjustment until you get the best hue.
6. Pr ess the ME NU k ey a nd m emor iz e the s et va lue.
NTSC 4.43 HUE(NTS C 4.43 HUE)
1. W hen NTS C 3 .58 is s et , NT SC 4.4 3 will be au tomat ic all y s et at
the respective values
TP-47B
TP-E(#### )
[CRT
SOCKET
PWB]
8. HUE[Method of adjustm ent using measur ing instrument]
NTSC 3.58 HUE[NTSC 3.58 HUE]
1. Inp ut a NTSC 3.5 8 MH z COMPOSI TE V IDEO sign al (f ul l fi e ld
colo ur bar with 75% whit e) from th e EXT t erminal.
2. Select 2 .V/C f rom the SE RVICE MENU .
3. Se lect 8. HU E wi th t he FUNCTION UP /DOW N ( / ) ke y.
4. Se t the initia l sett in g value of N TSC 3. 58 H UE w i th th e
FUNCTION - or + ( / ) key.
5. Con nect th e osc illosc ope be tw ee n TP -4 7B an d T P- E( #)
6. Adjust NTSC 3. 58 H UE t o bring th e val u e of (B) in the
illu s tr ation t o the values as s hown gi ven b i llo w ( volta ge
diff erenc e betwee n wh i te ( W) an d mag en ta ( Mg )) .
(B)
(-)
7. Press the MENU key and memoriz e the settin g value
0
WCyMgB
24
(+)
NTSC 4.43 HUE(NTSC 4.43 HUE)
1. W hen N T SC 3. 58 CO LOUR se t, NT SC 4 .43 COLO UR wil l
automatically set.
No. 51945
VOLTAGE (W-Mg)-8V-3V
32”28 ”
Page 25
A
A
A
DEFLECTION CIRCUIT ADJUSTMENT
(
)
(
)
(
)
(
)
Th ere are 4 as pe ct mode s ( ①①①①FULL, ②②②②PANORAMIC, ③③③③ SUBTIT LE , ④④④④ COMPRES) of the adjustment ( 1 ) 100Hz i mode,
( 2 ) 120Hz i mode ・・・・・・
"
When the 100 Hz FU LL mode has be en establ ished, the se ttin g of oth er mode s will be done automatically.
Ho wever, if the picture quality has not been optimized, adjust each mode again, respectively.
" The adjustment using the remote control unit is made on the basis of the initial setting values.
"
The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
・・・・ ・・ depending upon the kin d of signals ( vertical frequency 100Hzi / 120Hzi ).
・・・・ ・・・・・・ ・・
V32H20EUS
V28H20EUS
V28H20EUB
Initial setting value (AV32H20EUS)
Initial setting value
Setting itemAdjustment nam e
1. V- SH IF TVert ic al cent er-001+00100 0000 00+01200 00000000 00
2. V- SIZEVe rt ic al heig ht+002-001+00200 00+00800 00- 01400 00
3. H-CENTHor i zont al cente r-005+004- 002000000 0000 0000 0000 00
4. H-S IZEHorizont al width0000-004-0030000000000 00000000 00
5. TRAPE ZTr ap ez oida l di sto rt ion c orrec tion-013- 002- 0030000-002000000 0000 00
6. EW - PINSi de pin cor r ectio n- 041000000 000000000000 0000 0000 00
1. Receive a cir c l e p att ern s ig na l of ve rt ic al fr eque ncy 5 0H z.
2. Select 4 .DEF f rom t he SERVI CE M ENU.
3. Select 1.V-SHIFT with the FUNCTION UP / DOWN ( / ) key.
4. Ad just V-SHIFT to make A = B.
5. Check the ad j ustm en t val u e abo ve in o the r zoom mode . If i t i s a
wrong adjustment, re-adjust in PANORAMIC mode and adjust
A
B
by 1.V-SHIFT.
6. Pres s the ME NU key a nd m emor iz e th e s et va lue.
V-SIZ E
adjust me nt
Screen size
Scr e en
size
Picture size 100%
ASPECT MODEFULLPANORAMICSUBTITLE
SCREEN
TOP
SCREEN
BOTTOM
92 %87 %70%
92 %87 %83%
[ SCREEN SIZE ]
2.V-SI ZE1. R ecei v e a cross - h atch signa l.
2. Select 2.V-SIZE and set the initial s etting valu e.
3. Ad ju st V- S IZE a nd m ak e s ure t hat th e vert ic al sc r een siz e of
4. Pr ess the ME NU k ey a nd m emor iz e the s et va lue.
5. Input a NTSC VID EO si g nal ( 60 Hz) fr om the E XT ter m in al ,
6. Press the MENU key and memoriz e the set value
Picture
size
10 0%
th e p ict ur e s ize is in t he bellow t able.
an d m ake sure th at t he ver t ic al sc r een s iz e is i n th e ta ble
below.
26
No. 51945
Page 27
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
Item
H. CENTER
adjus tme nt
H.S IZ E
adjus tme nt
Measuring
instrume nt
CD
90 %
Test pointAd justment partDescription
3. H-CENT.1. Recei ve a c ircle p atter n s igna l.
2. Select 3.H-CENT and set the initial s etting value.
3. Ad ju s t H - CE NT to ma ke C=D.
4. Press the MENU key a nd m emoriz e th e s et va lue.
90 %
4. H- SIZ E1. Receive a circle pattern signal.
2. Select 4.H-SIZE and set the initial setting value.
3. Ad jus t H- S IZE an d m ake su re th at th e ho ri zo nta l scr e en si ze
4. Press the MENU key a nd m emoriz e th e s et va lue.
5. Inp ut a N T SC V IDEO sign al (6 0H z) f r om th e EXT ter m i na l,
6. Press the MENU key a nd m emoriz e th e s et va lue.
of th e p ict ure s i ze is in th e b ellow t abl e .
an d m ake su re tha t th e h orizo nt al scr een si ze of the each
ASPECT mode is in the below table.
AS PE CT
H SI Z E
EW-PIN
adjus tme nt
MODE
FULLPANORAMICSUBTITLE
92 %95 %
[ SCR EEN S IZ E ]
6.E W-PI N1. Se le ct 6 .EW - PIN an d s et t he ini tial s etti ng valu e
Straight
92 %
2. Ad jus t EW -PIN an d m ak e th e 2nd .v e rt ic al lines at th e l eft a nd
right ed ges of the s cree n str a i ght . A ls o make sur e th at th e 3rd
vertical lines are straight.
3. Press the MENU key a nd m emoriz e th e s et va lue.
No. 51945
27
Page 28
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
Item
TR APEZIU M
adjus tme nt
COR. UP/LO
adjus tme nt
StraightStraight
Measuring
instrume nt
Signal
generator
Remote
control unit
Signal
generator
Remote
control unit
Test pointAd justment partDescription
5. TRA PEZ1. R eceiv e a cross - h atch s igna l.
2. Select 5.TRAPEZ with the FUNCTION UP/DOWN ( / ) key.
3. Se t th e in it ial sett ing value of TRAPEZ with th e FU NCTION
- or + ( / ) key.
Paralle l
7.COR-PIN
8.COR-UP
9.COR-LO
4. Ad ju st TRAPE Z an d b r in g the VE RTICA L l i nes at th e ri gh t a nd
left edges of the scr een par al l el .
5. Pr ess the ME NU k ey a nd m emor iz e the s et va lue.
1. Se lect 8.COR-UP wit h the FUNCTION UP / DOW N ( / )
key.
2. Set the initial setting value of COR.-UP with the FUNCTION
- or + ( / ) key.
3. Ad ju st C OR - UP , an d br in g t he st raight l i ne a t the u pp er c orne r.
4. Se lect 9.COR-LO with th e FUNCTION UP / D OWN ( / )
key.
5. Set the initial setting value of COR-LO with the FUNCTION
- or + ( / ) key.
6. Ad ju st C OR - LO, an d brin g t he s tr aigh t l i ne at the l ow co rner .
7. Pr ess the ME NU k ey a nd m emor iz e the s et va lue.
8. If the e xt re am e u pper & low er c or n er s are a l itt le pi n or ba rrel
ch ose 7.C OR -P IN an d adju st.
9. Press the MENU key and memoriz e the set value
ANGLE
adjus tme nt
Fig. A
28
10. ANGLE• In case where ther e is a para lle logrammi cal dis tort ion of
images o n t he screen. (F ig.A )
1. Se lect 10.ANGLE with the FUNCTION UP / DOW N ( / )
key.
2. Ad ju st AN GE L, an d b ri n g t he VERTICAL l i nes str ai gh t..
3. Pr ess the ME NU k ey a nd m emor iz e the s et va lue.
No. 51945
Page 29
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
Item
BOW
adjus tme nt
V-S.CR
&
V. LI NE AR IT Y
adjus tme nt
Measuring
instrume nt
Test pointAd justment partDescription
11.B OW• In case where there is a bow-shaped distortion of images
on the sc ree n. ( Fig.B)
1. Se lect 11.BOWwith th e FU NCTIO N UP/DOW N ( / ) key.
2. Ad ju st BO W, an d b ri n g t he VERTICAL l i nes str ai gh t.
3. Pr ess the ME NU k ey a nd m emor iz e the s et va lue.
Fig. B
12.V- S.CR
13.V- LIN
TOP
• Whe n the vertica l li neari ty h a s been det e riorat ed
remark ably, perform the following steps
1. Rec ei ve a cross - h atch signa l.
2. Se lect 13.V-LIN wit h t he FUNCTION UP/ DOW N ( / )k ey.
3. Set the initial setting value of 13.V-LIN with the FUNCTION
- / + ( / ) key.
4. Select 1 2.V -S .COR with t he FUNCTION UP / DOW N ( / )
key.
5. Se t th e in it ial sett ing value of 12.V-S.COR with th e FU NCTION
- / + ( / ) key.
6. Ad ju st 13 .V-LI N an d 12.V -S.COR so tha t th e s p ac es of eac h
line on TO P, CE NTE R and BO T T OM bec ome u ni fo rm.
.
CENTER
BOT TOM
No. 51945
NO T E : Do not ad just PA NO RAMIC & SUBTIT LE mode.
At first the adjustment in 100Hz FULL mode should be done,
th en th e d at a f or the ot her asp ec t mo de is cor rec t ed in the
resp ecti ve value a t t he s am e time. A nd co nfir m th e d efl ec ti o n
ad justmen t in iti a l setti ng va lue i n 12 0Hz (NT SC EXT m od e)
FU LL m od e. If the adj u s tm en t in 10 0H z eac h asp ec t mode h as
b een don e and sto re d, th e d ata f or th e s am e as pect m od es i n
12 0Hz i s c or re cte d i n the res pect i ve va lue. Onl y t he da ta fo r th e
oth er as pect mod e in 12 0Hz i s co rrect ed f or its elf.
29
Page 30
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
AUDIO CIRCU IT ADJ USTMENT
"
Do not tou ch 3. AUDIO a djust ment of t he SER V ICE MEN U as it re qu ir e s no ad justmen t.
If values ha d ch an ge d for th e s o me r eas on, s et the ini tial values in t he fol l ow i ng ta bl e.
3. AUDIO (Do not adjust)
Setting itemVariabl e rangefixed value
1. ER R LI MIT00 0H~FF0H100H
2. A2 ID THR00H~FFH19H
3. Q-P EA K00 00 H ~7FFFH---
30
No. 51945
Page 31
SCHEMATIC DIAGRAMS
COLOUR TELEVISION
BASIC CHASSIS
AV32H20EUS
AV28H20EUS
AV32H20EUS
AV28H20EUS
AV28H20EUB
1 2 3
4 5 6
7 8
0
P
TVOK
P
TV
AV28H20EUB
CD-ROM No.SML200205
9
AV
MENU
CONTENTS
NOTE ON USING CIRCUIT DIAGRAMS
SEMICONDUCTOR SHAPES
BLOCK DIAGRAM
CIRCUIT DIAGRAMS
PATTERN DIAGRAMS
COPYRIGHT 2002 VICTOR COMPANY OF JAPAN, LTD.
2-1
2-2
2-3
2-5
2-21
No.51945
May 2002
Page 32
AV32H20EUS
STANDARD CIRCUI T DIAGRAM
NOTE ON USING CIRCUIT DIAGRAMS
1.SAFETY
The components identified by the symbol and shading are
critical for safety. For continued safety replace safety critical
components only with manufactures recommended parts.
2.SPECIFIED VOLTAGE AND WAVEFORM VALUES
The voltage and waveform values have been measured under the
following conditions.
(1)Input signal: Colour bar signal
(2)Setting positions of
each knob/button and
variable resistor
(3)Internal resistance of tester
:DC 20k
/V
(4)Os c illo scope sw eeping time
:H
20µS/div
:V
5mS/div
:Others
Sweeping time is
specified
(5)Voltage values
:All DC voltage values
Since the vol tage values o f signal cir cuit vary to some extent
according to adjustments, use them as reference values.
3.INDICATION OF PARTS SYMBOL [EXAMPLE]
In the PW board
:R1209
R209
4.INDICATIONS ON THE CIRCUIT DIAGRAM
(1)Resistors
Resistance value
No unit:[
]
K
:[K
]
M
Rated allowa ble power
No indication:1/ 16 [W]
Others:As specified
Type
No indication
:Carbon resistor
OMR
:Oxide metal fi lm resistor
MFR
:Metal film resistor
MPR
:Metal plate resistor
UNFR
:Uninflammable resistor
FR
:Fusible resistor
Composition resist or 1/2 [W] is specified as 1/2S or C omp.
(2)Capacitors
: Original setting position
when shipped
5.NOTE FOR REPAIR ING S ERVI CE
This mode l's p ower circu it is pa rtly diffe rent in th e GND . The
difference of the GND is shown by the LIVE : ( ) side GND and the
ISOLATED(NEUTRAL) : ( ) side GND.Therefore, care must be
taken for the following points.
(1)Do not touch the LIVE side GND or the LIVE side GND and the
ISOLATED(NEUTRAL) side GND simultaneously. If the above
caution is not respected, an electric shock may be caused.
Therefore, make sure that the power cord is surely removed from
the receptacle when, for example, the chassis is pulled out.
(2)Do not short between the LIVE side GND an d ISOLATED(NEUTRAL)
side GND or never measure with a measuring apparatus measure
with a measuring apparatus ( oscilloscope, etc.) the LIVE side GND
and ISOLATED(NEUTRAL) side GND at the same time.
If the above precaution is not respected , a fuse or any parts will be broken.
Since the circuit diagram is a standard one, the ci rcuit and
circuit constants may be subject to change for improvement
without any notice .
NOTE
Due improvement in performance, some part numbers show
in the circuit diagram may not agree with those indicated in
the part list.
When ordering parts, pl ease use the numbers t hat appear
in the Pa rts List.
Type
MM
:M eta lized mylar capa c ito r
PP
:Polypropylene capacitor
MPP
:Metalized polypropylene capacitor
MF
:Metal ized film capacitor
TF
:Thin film capacitor
BP
:Bipolar electrolytic capacitor
TAN
:Tantalum capacitor
(3)Coils
No unit
:[
µ
H]
Others
:As specified
(4)Power Supply
:B1
:9V
:5V
Respective voltage values are indicated
(5)Test p oint
:T est point
:Only test point display
(6)Connecting meth od
:Connector
:Wrapping or so ldering
:Receptacle
(7)Ground symbol
:LIVE side ground
:ISOLATED(NEUTRAL) s ide groun d
:EARTH ground
:DIGITAL ground
:[M]
Capacitance value
1 or higher:[pF]
less than 1
:[µF]
Withstand voltage
No indication :DC50[V]
Others:DC withstand voltage [V]
AC indicated
:AC withstand voltage [V]
Electrolytic Capacitors
47/50[Example]:Capacitance value [µF]/withstand voltage[V]
No indication
:Ceramic capacitor
:B2 (12V)
AV32H20EUS / AV28H20EUS / AV28H20EUB
AV28H20EUS
AV28H20EUB
FRONT CONTROL PWB PATTERN [2/2]
AV32H20EUS
AV28H20EUS
AV28H20EUB
2-32
W025
CKF1432-B01-1 /2!
1
5
2
R008
Q001
R004
D008
W033
J
W020
151012
W028
W027
5
1
W026
2
15
10
10
CN002
20 24
W031
IC001
C022
R003
R020
W036
W030
W024
W023
W022
15
25
13
2
D014
W035
R038
R006
R018
C003C004
W034
W032
D018
R035
25
TAKADA
01.02.09
2420
UL MARK
C019
FRONT
D009
ECOTIMER
Q005
R036
R037
ISOLATED
HYPER
SOUND
D007
CDS
Q007
Q006
1
W
2
W001
D012D013
Q002
R005
Y901
Y902
Q004
D011
D010
POWER
W037
R039
Q003
C901
VA901
LIVE
Y903
Y904
LF901
No.51945
S901
PW
250V
T3.15AH
12
F901
VP0205
DP8080
May 2002 No. 51945
Page 33
AV32H20EUS
12
43
78 101311
15129
14
1
87
396
54
2
MENUDOWNUP
56
13
51
9
CKF1432-B01-1 /2!
01.02.09
TAKADA
3
1
R017
C001
C002
C010C011
W021
F
SL
SR
J001
R021
R022
S001S002
S003
Y004
C005
W016
W018
J003
UL MARK
1
5
1012
CL009
R007
R015
R016
Y001
W019
J
Y002
L012
L001
C021
L002
L003
L010
L011
R001
R002
R010
R012
R013
Y009
W014
W015
C006
LC001
LC002
Y005
Y006
Y007
Y008
AV28H20EUS
AV28H20EUB
CONTENTS
AV32H20EUS
AV28H20EUS
AV28H20EUB
FRONT CONTROL PWB PATTERN [1/2]
SEMICONDUCTOR SHAPES
BLOCK DIAGRAM
CIRCUIT DIAGRAMS
MAIN PWB CIRCUIT DIAGRA M
POWER & DEF PWB CIRCUIT DIAGRAM
AV SW PWB CIRCUIT DIAGRAM
MICOM PWB CIRCUIT DIAG RAM
100Hz PWB CIRCUIT DIAG RAM
CRT SOCKET PWB CIRCUIT DIAGRAM
FRONT CONTROL PWB CIRCUIT DIAG RAM
P ATTERN DIAGRAMS
MAIN PWB PATTERN
POWER & DEF PWB PATTERN
AV SW PWB PATTERN
CRT SOCKET PWB PATTERN
MICOM PWB PATTERN
100Hz PWB PATTERN
FRONT CONTROL PWB PATTERN [1/2]
HOME AV NETWORK BUSINESS UNIT. 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama, Kanagawa-prefecture, 221-8528, Japan
Printed in Japan
VP 0205
DP8080
Page 49
A
V32H20EUS
A
A
V28H20EUS
V28H20EUB
PARTS LIST
CAUTION
! The pa rts identified b y th e ! sym bol are import ant for t he safe ty. Wh ene ver r epl acing the se par ts, be sure t o use s pec if i ed o nes to se cure
the safety .
!
The pa rts n ot i nd ic ated in th is P ar ts L ist a nd tho se whi c h ar e fil l ed with lines in the Parts No. columns will no t be supplied.
! P. W. Board Ass'y will not be supplied, but those which are filled with the Parts No. in the Parts No. columns will be supplied.
ABBREVIATIONS OF RESISTOR S, CAPACITORS AND TOLERANCES
RESISTORSCAPACITORS
C RCarbon ResistorC CAP.Ceramic Capacitor
F RFusible ResistorE CAP.Electrolyt ic Capacitor
P RPlat e Res istorM CAP.Mylar Capacitor
V R
HV RHigh Voltage ResistorMF CAP.Metalized Film Capacit or
MF RMetal Film ResistorMM CAP.Metalized Mylar Capacitor
C1001NCB31HK-222XC CAP.2200pF 50V K
C1002QETN1HM-106ZE CAP.10µF 50V M
C1004NCB31CK-104XC CAP.0.1µF 16V K
C1005QETN1CM-108ZE CAP.1000µF 16V M
C1006NCB31HK-103XC CAP.0.01µF 50V K
C1007QETN1HM-106ZE CAP.10µF 50V M
C1009NCB31CK-104XC CAP.0.1µF 16V K
C1010QETN1HM-106ZE CAP.10µF 50V M
C1101NCB31CK-104XC CAP.0.1µF 16V K
C1102QETN1HM-106ZE CAP.10µF 50V M
C1103NCB31CK-104XC CAP.0.1µF 16V K
C1104QETN1CM-107ZE CAP.100µF 16V M
C1105QETN1HM-106ZE CAP.10µF 50V M
C1106-07NCB31CK-104XC CAP.0.1µF 16V K
C1108NDC31HJ-680XC CAP.68pF 50V J
C1111NCB31HK-103XC CAP.0.01µF 50V K
C1116NCB31HK-472XC CAP.4700pF 50V K
C1117-18NCB31HK-103XC CAP.0.01µF 50V K
C1119-20NDC31HJ-2R0XC CAP.2.0pF 50V J
C1121NCB31HK-103XC CAP.0.01µF 50V K
C1122-23NDC31HJ-102XC CAP.1000pF 50V J
C1124-25QETN1HM-106ZE CAP.10µF 50V M
C1126NCB31CK-104XC CAP.0.1µF 16V K
C1127QETN1HM-106ZE CAP.10µF 50V M
C1128NCB31CK-104XC CAP.0.1µF 16V K
C1129NCF31AZ-105XC CAP.1µF 10V Z
C1130QETN1HM-106ZE CAP.10µF 50V M
C1151-54NCF31AZ-105XC CAP.1µF 10V Z
C1155-56NDC31HJ-102XC CAP.1000pF 50V J
C1301QETN1CM-107ZE CAP.100µF 16V M
C1302-03NCB31CK-104XC CAP.0.1µF 16V K
C1305-09NCB31CK-104XC CAP.0.1µF 16V K
C1310QETN1AM-228ZE CAP.2200µF 10V M
C1311NCB31CK-683XCHIP CAP.0.068 µF 16V K
C1312NDC31HJ-221XC CAP.220pF 50V J
C1313-15NCB31HK-223XC CAP.0.022 µF 50V K
C1316-18NCB31HK-103XC CAP.0.01µF 50V K
C1320QETN0JM-228ZE CAP. 2200µF 6.3V M
C1321-23NCB31HK-223XC CAP.0.022 µF 50V K
C1324NDC31HJ-820XC CAP.82pF 50V J
C1351QENC1EM-106ZBP E CAP.10µF 25V M
C1401NCB31CK-104XC CAP.0.1µF 16V K
C1402QETN1CM-107ZE CAP.100µF 16V M
C1403-04NCB31CK-104XC CAP.0.1µF 16V K
C1453NCB31HK-103XC CAP.0.01µF 50V K
C1454NCB31EK-333XC CAP.0.033 µF 25V K
C1455-56NCB31CK-104XC CAP.0.1µF 16V K
C1457NCB31EK-333XC CAP.0.033 µF 25V K
C1458NCB31CK-104XC CAP.0.1µF 16V K
C1471NCB31CK-104XC CAP.0.1µF 16V K
C1472NCB31HK-103XC CAP.0.01µF 50V K
C1473NCB31CK-104XC CAP.0.1µF 16V K
C1474NCB31EK-333XC CAP.0.033 µF 25V K
C1475NCB31CK-104XC CAP.0.1µF 16V K
C1491NCB31EK-473XC CAP.0.047 µF 25V K
C1501-02NDC31HJ-150XC CAP.15pF 50V J
C1551-52NCF31CZ-224XC CAP.0.22µF 16V Z
C1553QETN1EM-476ZE CAP.47µF 25V M
C1554-55NCF31CZ-224XC CAP.0.22µF 16V Z
C1560QETN1CM-107ZE CAP.100µF 16V M
Symbol No.Part No.Part NameDescription
!
CAPACITOR
C1561NDC31HJ-561XC CAP.560pF 50V J
C1562QETN1HM-105ZE CAP.1µF 50V M
C1564NCB31CK-104XC CAP.0.1µF 16V K
C1591NDC31HJ-471XC CAP.470pF 50V J
C1596NCB31CK-104XC CAP.0.1µF 16V K
C1600QETN1HM-226ZE CAP.22µF 50V M
C1606-07QETN1CM-227ZE CAP.220µF 16V M
C1616QETN1HM-105ZE CAP.1µF 50V M
C1618QETN1HM-105ZE CAP.1µF 50V M
C1628QETN1HM-107ZE CAP.100µF 50V M
C1629QETN1HM-106ZE CAP.10µF 50V M
C1630NCF21HZ-224XC CAP.0.22µF 50V Z
C1632NCF21HZ-224XC CAP.0.22µF 50V Z
C1634QETM1HM-228E CAP. 2200 µF 50V M
C1641-42NCF21HZ-224XC CAP.0.22µF 50V Z
C1646-47NCB31HK-103XC CAP.0.01µF 50V K
C1648-49QETM1VM-108E CAP. 1000 µF 35V M
C1673-74NCF31 AZ-105XC CAP.1µF 10V Z
C1675QETN1EM-476ZE CAP.47µF 25V M
C1676-77NDC31HJ-151XC CAP.150pF 50V J
C1678-79NDC31HJ-150XC CAP.15pF 50V J
C1680NCF31AZ-105XC CAP.1µF 10V Z
C1681NCB31HK-332XC CAP.3300pF 50V K
C1682NCB31EK-333XC CAP.0.033 µF 25V K
C1683QETN1EM-476ZE CAP.47µF 25V M
C1684NCB31HK-332XC CAP.3300pF 50V K
C1685NCB31EK-333XC CAP.0.033 µF 25V K
C1686NCF31AZ-105XC CAP.1µF 10V Z
C1687QETN1HM-106ZE CAP.10µF 50V M
C1688QETN1EM-476ZE CAP.47µF 25V M
C1689NCB31CK-104XC CAP.0.1µF 16V K
C1695NRSA63J-0R0XMG R0.0Ω 1/16W J
C1698NRSA63J-0R0XMG R0.0Ω 1/16W J
C1699NCB31HK-103XC CAP.0.01µF 50V K
C1701QETN1HM-106ZE CAP.10µF 50V M
C1702NCB31CK-563XCHIP CAP.0.056µF 16V K
C1951QETN1CM-477ZE CAP.470µF 16V M
C1952-53NCB31CK-104XC CAP.0.1µF 16V K
C1954QETN1AM-477ZE CAP.470µF 10V M
C1955QETN1AM-227ZE CAP.220µF 10V M
C1956QETN1AM-107ZE CAP.100µF 10V M
COIL
L1001QQL244K-270ZPEAKING COIL
L1002-03QQL244K-100ZCOIL10µH K
L1101QRN143J-0R0XC R0.0Ω 1/4W J
L1102QQL244K-4R7ZCOIL4.7µH K
C0002NCF31CZ-104XC CAP.0.1µF 16V Z
C0003NCB11CK-225XC CAP.2.2µF 16V K
C0004QETN0JM-108ZE CAP. 1000µF 6.3V M
C0005-06NCB11CK-225XC CAP.2.2µF 16V K
C0007NEH71CM-476XE CAP.47µF 16V M
C0012-13NCF31CZ-104XC CAP.0.1µF 16V Z
C0014NCB31HK-682XC CAP.6800pF 50V K
C0017NDC31HJ-150XC CAP.15pF 50V J
C0019NEH71CM-476XE CAP.47µF 16V M
C0020NCF31CZ-104XC CAP.0.1µF 16V Z
C0021NEH71CM-476XE CAP.47µF 16V M
C0022NCF31AZ-105XC CAP.1µF 10V Z
C0023NCB31EK-333XC CAP.0.033µF 25V K
C0024NCF31CZ-104XC CAP.0.1µF 16V Z
C0027-28NEH71CM-476XE CAP.47µF 16V M
C0029NDC31HJ-151XC CAP.150pF 50V J
C0030-32NCF31CZ-104XC CAP.0.1µF 16V Z
C0034-39NCF31CZ-104XC CAP.0.1µF 16V Z
C0111-12QETN1CM-477ZE CAP.470µF 16V M
C0113-14NCB31HK-102XC CAP.1000pF 50V K
C0115-17QETN1HM-106ZE CAP.10µF 50V M
C0118-19QETN1HM-105ZE CAP.1µF 50V M
C0120NCB31HK-103XC CAP.0.01µF 50V K
C0121QETN1HM-105ZE CAP.1µF 50V M
C0122QETN1HM-106ZE CAP.10µF 50V M
C0123QETN1HM-105ZE CAP.1µF 50V M
C0124NCB31HK-103XC CAP.0.01µF 50V K
C0125NCB31HK-102XC CAP.1000pF 50V K
C0126-28QETN1HM-106ZE CAP.10µF 50V M
C0129QETN1HM-105ZE CAP.1µF 50V M
C0130NCB31HK-103XC CAP.0.01µF 50V K
C0131QETN1HM-105ZE CAP.1µF 50V M
C0132NCB31HK-103XC CAP.0.01µF 50V K
C0133QETN1HM-106ZE CAP.10µF 50V M
C0134QETN1HM-105ZE CAP.1µF 50V M
C0135QETN1HM-106ZE CAP.10µF 50V M
C0136QETN1HM-105ZE CAP.1µF 50V M
C0137NCB31HK-103XC CAP.0.01µF 50V K
C0138-39QENC1HM-105ZE CAP.1µF 50V M
C0140QENC1EM-106ZBP E CAP.10µF 25V M
C0141-47NCB31HK-103XC CAP.0.01µF 50V K
C0148QETN1HM-106ZE CAP.10µF 50V M
C0149QENC1EM-106ZBP E CAP.10µF 25V M
C0150-51QETN1CM-107ZE CAP.100µF 16V M
C0152QETN1CM-477ZE CAP.470µF 16V M
C0153NCB31HK-103XC CAP.0.01µF 50V K
C0154QETN1CM-107ZE CAP.100µF 16V M
C1001NCB31HK-222XC CAP.2200pF 50V K
C1002QETN1HM-106ZE CAP.10µF 50V M
C1004NCB31CK-104XC CAP.0.1µF 16V K
C1005QETN1CM-108ZE CAP.1000µF 16V M
C1006NCB31HK-103XC CAP.0.01µF 50V K
C1007QETN1HM-106ZE CAP.10µF 50V M
C1009NCB31CK-104XC CAP.0.1µF 16V K
C1010QETN1HM-106ZE CAP.10µF 50V M
C1101NCB31CK-104XC CAP.0.1µF 16V K
C1102QETN1HM-106ZE CAP.10µF 50V M
C1103NCB31CK-104XC CAP.0.1µF 16V K
C1104QETN1CM-107ZE CAP.100µF 16V M
C1105QETN1HM-106ZE CAP.10µF 50V M
C1106-07NCB31CK-104XC CAP.0.1µF 16V K
C1108NDC31HJ-680XC CAP.68pF 50V J
C1111NCB31HK-103XC CAP.0.01µF 50V K
C1116NCB31HK-472XC CAP.4700pF 50V K
C1117-18NCB31HK-103XC CAP.0.01µF 50V K
C1119-20NDC31HJ-2R0XC CAP.2.0pF 50V J
C1121NCB31HK-103XC CAP.0.01µF 50V K
C1122-23NDC31HJ-102XC CAP.1000pF 50V J
C1124-25QETN1HM-106ZE CAP.10µF 50V M
C1126NCB31CK-104XC CAP.0.1µF 16V K
C1127QETN1HM-106ZE CAP.10µF 50V M
C1128NCB31CK-104XC CAP.0.1µF 16V K
C1129NCF31AZ-105XC CAP.1µF 10V Z
C1130QETN1HM-106ZE CAP.10µF 50V M
C1151-54NCF31AZ-105XC CAP.1µF 10V Z
C1155-56NDC31HJ-102XC CAP.1000pF 50V J
C1301QETN1CM-107ZE CAP.100µF 16V M
C1302-03NCB31CK-104XC CAP.0.1µF 16V K
C1305-09NCB31CK-104XC CAP.0.1µF 16V K
C1310QETN1AM-228ZE CAP.2200µF 10V M
C1311NCB31CK-683XCHIP CAP.0.068 µF 16V K
C1312NDC31HJ-221XC CAP.220pF 50V J
C1313-15NCB31HK-223XC CAP.0.022 µF 50V K
C1316-18NCB31HK-103XC CAP.0.01µF 50V K
C1320QETN0JM-228ZE CAP. 2200µF 6.3V M
C1321-23NCB31HK-223XC CAP.0.022µF 50V K
C1324NDC31HJ-820XC CAP.82pF 50V J
C1351QENC1EM-106ZBP E CAP.10µF 25V M
C1401NCB31CK-104XC CAP.0.1µF 16V K
C1402QETN1CM-107ZE CAP.100µF 16V M
C1403-04NCB31CK-104XC CAP.0.1µF 16V K
C1453NCB31HK-103XC CAP.0.01µF 50V K
C1454NCB31EK-333XC CAP.0.033 µF 25V K
C1455-56NCB31CK-104XC CAP.0.1µF 16V K
C1457NCB31EK-333XC CAP.0.033µF 25V K
C1471NCB31CK-104XC CAP.0.1µF 16V K
C1472NCB31HK-103XC CAP.0.01µF 50V K
C1473NCB31CK-104XC CAP.0.1µF 16V K
C1474NCB31EK-333XC CAP.0.033 µF 25V K
C1475NCB31CK-104XC CAP.0.1µF 16V K
C1491NCB31EK-473XC CAP.0.047 µF 25V K
C1501-02NDC31HJ-150XC CAP.15pF 50V J
C1551-52NCF31CZ-224XC CAP.0.22µF 16V Z
C1553QETN1EM-476ZE CAP.47µF 25V M
C1554-55NCF31CZ-224XC CAP.0.22µF 16V Z
C1560QETN1CM-107ZE CAP.100µF 16V M
C1561NDC31HJ-561XC CAP.560pF 50V J
C1562QETN1HM-105ZE CAP.1µF 50V M
C1564NCB31CK-104XC CAP.0.1µF 16V K
C1591NDC31HJ-471XC CAP.470pF 50V J
Symbol No.Part No.Part NameDescription
!
CAPACITOR
C1596NCB31CK-104XC CAP.0.1µF 16V K
C1600QETN1HM-226ZE CAP.22µF 50V M
C1606-07QETN1CM-227ZE CAP.220µF 16V M
C1616QETN1HM-105ZE CAP.1µF 50V M
C1618QETN1HM-105ZE CAP.1µF 50V M
C1628QETN1HM-107ZE CAP.100µF 50V M
C1629QETN1HM-106ZE CAP.10µF 50V M
C1630NCF21HZ-224XC CAP.0.22µF 50V Z
C1632NCF21HZ-224XC CAP.0.22µF 50V Z
C1634QETM1HM-228E CAP. 2200 µF 50V M
C1641-42NCF21HZ-224XC CAP.0.22µF 50V Z
C1646-47NCB31HK-103XC CAP.0.01µF 50V K
C1648-49QETM1VM-108E CAP. 1000 µF 35V M
C1673-74NCF31AZ-105XC CAP.1µF 10V Z
C1675QETN1EM-476ZE CAP.47µF 25V M
C1676-77NDC31HJ-151XC CAP.150pF 50V J
C1678-79NDC31HJ-150XC CAP.15pF 50V J
C1680NCF31AZ-105XC CAP.1µF 10V Z
C1681NCB31HK-332XC CAP.3300pF 50V K
C1682NCB31EK-333XC CAP.0.033 µF 25V K
C1683QETN1EM-476ZE CAP.47µF 25V M
C1684NCB31HK-332XC CAP.3300pF 50V K
C1685NCB31EK-333XC CAP.0.033 µF 25V K
C1686NCF31AZ-105XC CAP.1µF 10V Z
C1687QETN1HM-106ZE CAP.10µF 50V M
C1688QETN1EM-476ZE CAP.47µF 25V M
C1689NCB31CK-104XC CAP.0.1µF 16V K
C1695NRSA63J-0R0XMG R0.0Ω 1/16W J
C1698NRSA63J-0R0XMG R0.0Ω 1/16W J
C1699NCB31HK-103XC CAP.0.01µF 50V K
C1701QETN1HM-106ZE CAP.10µF 50V M
C1702NCB31CK-563XCHIP CAP.0.056µF 16V K
C1951QETN1CM-477ZE CAP.470µF 16V M
C1952-53NCB31CK-104XC CAP.0.1µF 16V K
C1954QETN1AM-477ZE CAP.470µF 10V M
C1955QETN1AM-227ZE CAP.220µF 10V M
C1956QETN1AM-107ZE CAP.100µF 10V M
COIL
L1001QQL244K-270ZPEAKING COIL
L1002-03QQL244K-100ZCOIL10µH K
L1101QRN143J-0R0XC R0.0Ω 1/4W J
L1102QQL244K-4R7ZCOIL4.7µH K
C2529QFZ0197-154MPP CAP.0.15µF 250V J
C2530QCB32HK-561ZC CAP.560pF 500V K
C2531QFZ0194-534MPP CAP.0.53µF 250V J
C2532QETM2CM-227E CAP. 220µF 160V M
C2533QETN2EM-475ZE CAP. 4.7µF 250V M
C2541QENC1HM-105ZE CAP.1µF 50V M
C2551QCB32HK-152ZC CAP.1500pF 500V K
C2552QETN1CM-108ZE CAP.1000µF 16V M
C2553QCB32HK-152ZC CAP.1500pF 500V K
C2554QETN1CM-108ZE CAP.1000µF 16V M
C2555QCB32HK-102ZC CAP.1000pF 500V K
C2556QETN2EM-106ZE CAP. 10µF 250V M
C2558QETN1CM-477ZE CAP.470µF 16V M
C2559QEHR1CM-227ZE CAP.220µF 16V M
C2581QETN1CM-107ZE CAP.100µF 16V M
C2582QETN1EM-476ZE CAP.47µF 25V M
C2583QETN2AM-106ZE CAP. 10µF 100V M
C2584QETN1AM-227ZE CAP.220µF 10V M
C2901QFZ9072-473MM CAP.0.047µFAC275V K
!
!
C2902QFZ9072-104MF CAP.0.1µFAC275V K
!
C2903QFZ9072-473MM CAP.0.047µFAC275V K
C2904QCZ9054-472C CAP.4700pFAC250V Z
C2905QCZ9054-472C CAP.4700pFAC250V Z
C2906QCZ9054-472C CAP.4700pFAC250V Z
C2907QEZ0199-227E CAP.220µF 400V M
C2908QCB32HK-103C CAP.0.01µF 500V K
Symbol No.Part No.Part NameDescription
!
CAPACITOR
C2909QCZ0340-391C CAP.390pF 2kV K
C2910QETN1HM-476ZE CAP.47µF 50V M
C2911QCB31HK-102ZC CAP.1000pF 50V K
C2912QCZ0340-561C CAP.560pF 2kV K
C2914QCB31HK-471ZC CAP.470pF 50V K
C2915QFLC1HJ-104ZM CAP.0.1µF 50V J
C2916QCB32HK-152ZC CAP.1500pF 500V K
C2931QCZ90 54-472C CAP.4700pFAC250V Z
!
!
C2932QCZ9054-472C CAP.4700pFAC250V Z
!
C2933QCZ9054-472C CAP.4700pFAC250V Z
C2934QETM2GM-226E CAP. 22µF 400V M
C2941QTMN1CM-477ZE CAP.470µF 16V M
C2942QETN1AM-337ZE CAP.330µF 10V M
C2951QEZ0203-227E CAP.220µF 160V M
C2952QETN1CM-108ZE CAP.1000µF 16V M
C2955QETM1VM-228E CAP.2200µF 35V M
C2956QETN1AM-108ZE CAP.1000µF 10V M
C2957QETN1AM-228ZE CAP.2200µF 10V M
C2959QFV71HJ-684ZMF CAP.0.68µF 50V J
C2960QCZ0325-821C CAP.820pF 2kV K
C2972-73QETN1AM-477ZE CAP.470µF 10V M
C2974QETN0JM-228ZE CAP. 2200µF 6.3V M
C2975QETN1AM-228ZE CAP.2200µF 10V M
C2991QCZ9079-222C CAP.2200pFAC250V M
C3104QCB31HK-103ZC CAP.0.01µF 50V K
C3106QETN1HM-335ZE CAP. 3.3µF 50V M
C3107QETN1CM-107ZE CAP.100µF 16V M
C3110QETN2CM-106ZE CAP.10µF 160V M
C3111QCB32HK-472ZC CAP.4700pF 500V K
C3113QETN2CM-106ZE CAP.10µF 160V M
C3114QCB32HK-472ZC CAP.4700pF 500V K
C3116-17QETN1AM-107ZE CAP.100µF 10V M
C3118QETN1AM-337ZE CAP.330µF 10V M
C3120-21NDC31HJ-221XC CAP.220pF 50V J
C3201-03NDC31HJ-100XC CAP.10pF 50V J
C3204-06NCF31CZ-104XC CAP.0.1µF 16V Z
C3207-09QETN1EM-476ZE CAP.47µF 25V M
C3210-12QFK62EK-104ZMM CAP.0.1µF 250V K
C3213-15NDC31HJ-181XC CAP.180pF 50V J
52
No. 51945
Page 71
A
A
!
Symbol No.Part No.Part NameDescription
CAPACITOR
C3216QETN1CM-107ZE CAP.100µF 16V M
C3218QETM2EM-336E CAP.33µF 250V M
C3219QFZ0097-223MM CAP.0.022µF 1250V K
C3221QETN2EM-106ZE CAP. 10µF 250V M
C3302QETN1HM-476ZE CAP.47µF 50V M
COIL
L3101QQL244K-5R6ZCOIL5.6µH K
L3204QQL26AJ-102ZCOIL1mH J