JVC AV-25MT16, AV-29BA16, AV-29MT16, AV-21BA16, AV-29ST16 Instructions Manual
...
INSTRUCTIONS
GGT0121-001A-H
AV-29BA16 AV-21BA16
AV-29MT16 AV-21MT16
AV-29ST16 AV-21VT16
AV-29VT16
AV-25MT16
COLOR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features .......................................................3
Remote control buttons and basic functions ..............................4
TV buttons and functions ............................................................6
Setting up your TV ......................................................................7
Basic setting for picture ..............................................................9
Advanced setting for picture ..................................................... 11
Basic setting for sound .............................................................12
Advanced setting for sound ......................................................13
DVD Menu ................................................................................15
Customized setting ...................................................................16
TV channel presetting ..............................................................18
Additional preparation ..............................................................19
Troubleshooting ........................................................................20
Specifi cations ...........................................................................21
2
15 cm
10 cm 10 cm
15 cm
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE
FOLLOWING RULES REGARDING THE USE OF THIS TV.
1 Operate only from the power source indicated on the rear of the TV.
2 Avoid damaging the power cord and mains plug. When unplugging the
TV, grasp the mains plug. Do not pull on the power cord.
3 Never block or cover the ventilation openings.
Never install the TV where good ventilation is unattainable.
When installing this TV, leave spaces for ventilation around the TV of
more than the minimum distances as shown.
4 Do not allow objects or liquid into the cabinet openings.
5 In the event of a fault, unplug the unit and call a service technician.
Do not attempt to repair it yourself or remove the rear cover.
6 The surface of the TV screen is easily damaged. Be very careful with it
when handling the TV. Should the TV screen become soiled, wipe it with
a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent
on it.
7 This TV can be turned on/off power by connecting/disconnecting the AC
plug into AC outlet. While this TV is being installed, enough space should
be reserved for connection/disconnecting the AC plug into AC outlet by
hand.
8 The apparatus shall not be exposed to dripping or splashing and that
no objects fi lled with liquids, such as vases, shall be placed on the
apparatus.
WARNING: <AV-21M, AV-25M, AV-29M, AV-21B, AV-29B Series>
YOU CAN DETACH THE PROTECT SHEET ON THE TOP
AND BOTTOM OF FRONT FRAME IF YOU NEEDED.
THE FRONT BUTTON DOOR OF THE TV SHOULD BE
PULLED OUT FROM ITS BOTTOM. DO NOT PRESS THE
UPPER PART, OR YOUR FINGER MAY BE PINCHED.
Thank you for buying this JVC color television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
✓
PULL PULL
3
Knowing your TV’s features
EXIT
CLOSED
CAPTION
VNR
ECO
CINEMA
SURROUND
BASS
RM-C1287
100+
COLOR
Confi rm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number.
The model number is indicated at the rear of your TV. When you press a button concerned to a function that
is not available for your TV, it does not work and the logo “Ø” appears on the screen.
NO.
Model No.
Function
AV-29BA16
AV-29MT16
AV-29ST16
AV-29VT16
AV-25MT16
AV-21BA16
AV-21MT16
AV-21VT16
1
MaxxBass
—OOOO—OO
—
PICTURE TILT
OOOO————
—
MTS
—OOOO—OO
2
AI ECO SENSOR
—OOOO—OO
2
ECO MODE
O————O——
Main features
DVD MENU Just connect DVD player to the television. The television will detect DVD signal and display
picture on the screen automatically and you can adjust pictures and sound while you are
watching DVD as your desire. When disconnect DVD player, the television will display the
previous channel.
MaxxBass MaxxBass enhances bass sound that cannot be reproduced by normal speakers to be
heard by our ears.
MTS You can listen the stereo sound or SAP from TV program broadcating by MTS system.
(SAP: Second audio program.)
CLOSED CAPTION You can display dialog on the screen from TV broadcasting with Closed caption system.
You also may be able to display some information in text form if available.
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
AI ECO SENSOR TV detects the brightness of your room and automatically adjust the picture brightness to
a suitable level for a better eyecare.
ECO MODE You can adjust TV screen contrast according to the brightness of your room to suitable
level for a better eyecare.
AI VOLUME TV adjusts the volume automatically to the same level for all TV channels to avoid sudden
change of the volume when selecting different TV channels or selecting Video Mode.
VNR You can reduce the picture noise when viewing noisy TV programs or video sources.
TINT You can adjust TINT setting for all color systems, including PAL.
4
Remote control buttons and basic functions
1
6
3
7
9
5
8
2
!
4
EXIT
CLOSED
CLOSED
CAPTION
CAPTION
100+
VNR
RM-C1287
COLOR
"
#
No. Press To
1
POWER Turn on or off the TV from standby mode.
2
MENU/OK Display menu and confi rm selected function.
3
5 / ∞ / 2 / 3 Select and adjust menu function.
4
CHANNEL -/+ Select the desired channel number.
5
VOLUME -/+ Adjust the volume level.
6
TV/VIDEO
EXIT
Select TV or video terminal input.
On the other hand, you can use this button to EXIT from the menu.
7
MUTING Turn off the volume.
Press this button again to resume the volume.
8
DISPLAY
/BACK
Display the program number or video terminal number on the screen.
On the other hand, you can use this button to return to the previous menu.
9
0~9, 100+ Select the program number. For three digits program number, press 100+, then press the number
button.
!
RETURN+ a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
"
CLOSED
CAPTION
Display information in text which are broadcasted by some TV channels.
#
FAVORITE
CHANNEL
(color buttons:
red, green,
yellow, blue)
Register and recall 4 favorite channels.
1. Choose the TV channel you want to register then press and hold a color button until
“PROGRAMMED! ■" appears.
2. To register other favorite channels, repeat step 1.
To recall the favorite channel, press the color button.
When the TV is in menu mode, the favorite channel function is not available.
5
Remote control buttons and basic functions (continued)
The following chart shows locations of functions in menus. In this manual,
location of a function is described as follows:
Note: Some functions have the 4th menus as the sub-menus.
How to operate menus and menus locations
To Operation Note
Display the MENU
Press the MENU/OK button 2.
PICTURE MENU is displayed on
fi rst press.
To exit the MENU,
press the DISPLAY/
BACK button 8 or
choose EXIT menu
or TV/VIDEO/EXIT
button 6.
Choose a Top
menu
Press 2/3 buttons 3 to choose
a menu title when the cursor is
pointing at MENU.
—
Choose a 2nd
menu
Press 5/∞ buttons 3 to choose a
2nd menu title.
Press ∞ button 3
to display the next
functions.
Display the 3rd
menu
Press 5/∞ buttons 3 to choose a
2nd menu title. Then press MENU/
OK button 2.
Return to the
previous menu
Press the DISPLAY/BACK button
8.
—
Choose the setting
of a function
Press 5/∞ buttons 3 to choose
a function. Then press the 2/3
buttons 3 to change the setting.
Press the TV/ VIDEO/
EXIT button 6 to exit
from the menu.
Adjust the effect
level of a function
Press 5/∞ buttons 3 to choose
a function. Then press the 2/3
buttons 3 to adjust the effect
level.
Display the sub
menu of a function.
Press the 5/ ∞ buttons 3 to
choose a function. Then press
MENU/OK button 2 to display
the sub menu.
—
Top menu 2nd menu Location 3nd menu Location
MENU
PICTURE PICTURE MODE P.9 – –
PICTURE SETTING P.10 PICTURE P.10
BRIGHT P.10
DETAIL P.10
COLOR P.10
TINT P.10
WHITE BALANCE P.10 – –
VNR P.16 – –
SOUND MTS P.13 – –
AI VOLUME P.14 – –
SOUND MODE P.12 – –
EQUALIZER P.14 – –
BALANCE P.12 – –
CINEMA SURROUND
P.13 – –
MaxxBass P.13 – –
FEATURES DVD MENU P.15
AUTO SIGNAL DETECT
P.15
DVD PICTURE MODE
P.15
DVD THEATER STATUS
P.15
DVD SOUND MODE
P.15
ON TIMER P.16 CH P.16
ON TIMER P.16
OFF TIMER P.17 – –
CHILD LOCK P.16 – –
COMPRESS (16:9)
P.11 – –
AI ECO SENSOR/
ECO MODE
P.11 – –
INSTALL AUTO PROGRAM P.18 – –
CHANNEL SUMMARY
P.18 – –
COLOR SYSTEM P.9 – –
VIDEO-2 SETTING P.17 – –
BLUE BACK P.11 – –
CLOSED CAPTION P.16 CAPTION P.16
TEXT P.16
PICTURE TILT P.11 – –
BEEP P.17 – –
Top menu 2nd menu 3rd menuMENU
Top menu 2nd menuMENU
6
TV buttons and functions
The illustrations shown below is for AV-21BA16 and AV-29ST16 only, which are used for explanation purpose.
Your TV may not look exactly the same as illustrated.
POWER
TV/VIDEO
MENU/OK
CHANNEL
VOLUME
RVL/MONO
IN(VIDEO-3)
Front of the TV
AV-29ST16
Rear of the TV
AV-29ST16
POWER
VOLUME
CHANNEL
MENU
OK
VR
L / MONO
IN (VIDEO-3)
6
,22,
-/./
9
#
"
#
2
6
6
3
/6%2
,
2
-/./
/54054
6)$%/
#/-0/.%.4
6)$%/
).054
).054
AV-21BA16
No. Button/terminal Description Page
1
L (main power)
Press to turn on or turn off the TV’s main power. –
2
POWER lamp Indicate the TV’s status. –
No color : TV’s main power is being turned off.
Red : TV’s main power is being turned on.
Blink :
While the TV is in standby mode, ON TIMER funciton is in used.
While the TV is in turn on mode , OFF TIMER function is in used.
Note: When you turn off the power switch while TV is in standby mode,
the power lamp will go off in 10 -15 seconds.
When you operate the TV, POWER Lamp will be blink.
3
ECO sensor –
4
Remote control sensor –
5
TV/VIDEO
Press to select TV or Video terminal input or exit from menu.
–
6
VOLUME -/+ Press to adjust the volume level. –
7
CHANNEL -/+
Press to select the desired channel (Both of RF and Video input.)
–
8
MENU/OK Press to display the menu. –
9
IN (VIDEO-3) Video and audio input jacks for VIDEO-3 mode. 19
!
Headphone jack. 19
"
Aerial socket. 7
#
OUTPUT Video and audio output jacks. (The component video
signal cannot be output.)
19
$
COMPONENT
(VIDEO-2) INPUT
Video or component video, and audio input jacks for VIDEO-2
mode. You can select the input signal by setting the “VIDEO-2
SETTING” function (see page 17).
19
%
VIDEO-1 INPUT
Video or S-VIDEO, and audio input jacks for VIDEO-1 mode. 7
How to operate the menus with the TV button
TV button
Work as same as the button on
the remote control unit
Note
MENU MENU/OK button To display main menu and exit menu after
fi nish setting.
CHANNEL -/+ ∞/5 button To select menu function.
VOLUME -/+ 2/3 button To choose a Top menu and adjust the
desired menu function.
7
2 Connecting the main plug to the AC outlet.
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
)1
(
)2
(
)3
(
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
1 Connecting the aerial cable.
3 Inserting batteries into the remote control.
Insert two batteries by following the + and - polarities
and inserting the - end fi rst.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fi t
new batteries. The supplied batteries are for testing,
not regular use.
4 Turn on the TV by pressing the main power button.
JVC logo appears on the screen.
V
LRRL
/
MONO
Y
C
B
C
R
/
V
V
S
OVER
L
R
/
MONO
OUTPUT
VIDEO-1
COMPONENT
(VIDEO-2)
INPUT
INPUT
Rear of TV
AV-29ST16
VHF/UHF outdoor aerial
VCR
If you connect a VCR, connect the aerial output jack of your VCR and
the aerial jack on the TV with aerial cable. Then connect the output
jacks of your VCR and the VIDEO-1 input jacks of the TV with the
video cable (or S-VIDEO cable if available) and audio cables. For
details, see the manual of your VCR.
The illustration shown is just a sample. It may not be same as your TV.
JVC logo will appear on the screen again at the phase of “SETUP
TOUR RESTART?” function. Then the initial setting can be performed
according to page 8.
Note:
While in the INSTALL menu with the cursor pointing at INSTALL, pressing
the blue button will also display the JVC logo.
Matching aerial
adapter (supplied)
8
5 Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by
following the steps below:
• Press 5/∞ button or
CH +/- key to select
AIR or CABLE, press
the MENU/OK button.
• TV will start searching
for the channels.
To stop AUTO
PROGRAM, press
MENU/OK button.
Setting up your TV (continued)
• To complete the initial
setting, press the
MENU/OK button.
To set undesired
channels to be
skipped, see page 18.
• “SETUP TOUR
RESTART?” will be
displayed.
Press the MENU/OK
button to cancel
the SETUP TOUR
RESTART function.
If you want to make
initial settings again
when the next time
you turn on the TV,
press the Red button
to activate the SETUP
TOUR RESTART
function.
AUTO PROGRAM
MENU : OK
DISPLAY : BACK
TV/VIDEO : EXIT
AUTO PROGRAM
MENU : OK
10%
CHANNEL SUMMARY
MENU : OK
■
SKIP
■
CANCEL
CH/CC SKIP
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
AUTO PROGRAM
MENU : NO
SETUP TOUR RESTART?
■
: YES
AIR
CABLE
■
■
■
■
When turn on the TV at
the next time
Loading...