JVC AV-29SX28, AV-29SX18 Instructions Manual

Download

Page 1

COLOUR TELEVISION INSTRUCTIONS

AV-29SX28 AV-29SX18

GGT0240-001B-H

Safety precautions ............................... 2

Connections

......................................... 3

TV buttons and functions ..................... 3

Remote control buttons and

basic functions ..................................... 4

Initial settings ....................................... 5

Registering / Editing channels ............. 5

PREPARATION

Picture setting ...................................... 6

Sound setting ...................................... 6

Useful functions ................................... 7

Teletext operation ................................ 9

Watching Video or DVDs ................... 10

CH/CC List ..........................................11

Troubleshooting ................................. 12

Speciﬁcation ...................................... 13

FUNCTIONS

REFERENCE

Contents

ENGLISH

POWER

Page 2

POWER

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

CAUTION

TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV.

• Operate only from the power source indicated on the rear of the TV.

• Avoid damaging the power cord and main plug. When unplugging the TV, grasp the main plug. Do not pull on the power cord.

• This TV can be turned on/off power by connecting/ disconnecting the AC plug into AC outlet. While this TV is being installed, enough space should be reserved for connection/ disconnecting the AC plug into AC outlet by hand.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

• Never block or cover the ventilation openings.

• Never install the TV where good ventilation is unattainable.

• When installing this TV, leave spaces for ventilation around the TV of more than the minimum distances as shown.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

• Do not allow objects or liquid into the cabinet openings.

• The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

In the event of a

fault, unplug the unit and

call a service technician. Do

not attempt to repair it yourself

or remove the

rear cover.

• Never listen to headphones at high volume!

- It may damage your hearing.

Page 3

CAUTION

Ensure to turn off all equipments including the TV before connecting the AC main plug to the AC outlet.

Connections

TV buttons and functions

Video and audio input jacks for VIDEO-3 mode

Remote control sensor

TV’s main power on/off

Power lamp - Indicates the TV’s status. No colour: TV’s main power is being turned off. Red: TV’s main power is turned on. Blink: While the TV is in standby mode, ON TIMER function is in used. While the TV is in turn on mode, OFF TIMER function is in used.

VHF/UHF outdoor aerial

Rear of VCR

Connecting to the aerial cable and VCR

(Connect directly if not using a VCR)

RF output

(Connect via a VCR)

RF input

TV rear terminals

Connecting to the front video input terminal

Camcorder or TV game

Headphones

After all the connections have been made, insert the main plug to the AC outlet.

• When connecting to COMPONENT (VIDEO-2) input, depending on the connection, choose the appropriate video input using the menu (\ page 10).

DVD player (with component video signals input)

VCR (for playing) DVD player (composite signals)

VCR (for recording)

Connecting to the rear component/video input terminal and output terminal

Aerial cable

Video output

Audio output

Channel selection, To select menu function

Display the menu and exit after finish setting

Volume level adjustment, To choose a Top menu and adjust the desired menu function

Headphone jack

75-ohm coaxial cable (not supplied)

ECO sensor

TV or Video terminal input selection, Exit from the menu

Page 4

Remote control buttons and basic functions

COLOUR SOUND

SYSTEM

POWER

FAVORITE CHANNEL

TV/VIDEO

DISPLAY MUTING

DVD MENU

ECO

BASS

CHANNEL VOLUME

-/--

RM-C1171

PICTURE PICTURE

BOOSTER MODE

CINEMA

SURROUND

SOUND

MODE



+ +

RETURN+

Turn the TV on from standby and vice versa

TV or video terminal input selection, Exit from the menu

Turn the volume Off / On

Programme number selection

For two digits :

Adjust the volume level, Turn off Muting

Channel selection

Select the desired channel number.

For Hyper Scan

Press and hold

RETURN PLUS function

Return to the frequently viewed channel.

PR chan ges without changing the pi ct u re . Onc e you stop pre s si n g CHANNEL+ or CH ANNEL – button, picture will change to the desired PR.

• Insert two batteries by following the and polarities and inserting the end first.

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use.

WARNING:

Batteries shall not be exposed to excessive heat such as direct sunshine, ﬁre or the like.

RETURN function

If you have not set or have cancelled the RETURN PLUS channel, this will return to the previously viewed channel.

Press and hold

RETURN PLUS

PROGRAMMED!

Choose the channel you want to programme

FAVORITE CHANNEL

Programme and recall 4 favourite channels

(colour buttons: red, green, yellow, blue)

Choose the TV channel you wish to programme

Press and hold

any button

PROGRAMMED! ■

Repeat to programme another favourite channel.

To recall the favourite channel, press the corresponding colour button.

• When the TV is in Text function or MENU mode, the favourite channel function is not available.

Press and hold

RETURN PLUS

CANCELED!

To cancel

If this symbol is shown, it is only valid in the European Union.

• Display the programme or video terminal number.

• To return to the previous menu

Page 5

Initial Settings

Registering / Editing channels

TEXT LANGUAGE

GROUP-1 GROUP-2 GROUP-3 GROUP-4

MENU : EXIT

DISPLAY : BACK

OK / : SELECT

AUTO PROGRAM

10%

/ : EDIT

COLOUR SYSTEM PAL

AUTO PROGRAM

MENU SET UP

EDIT / MANUAL

TEXT LANGUAGE

LANGUAGE

MENU : EXIT

OK / : SELECT

MENU TV/VIDEO

CH 02

CH 05 CH 06 CH 07 CH 08

CH 04

CH 03

3 4 5 6

EDIT

PR CH/CC

MENU : EXIT

MOVE

DELETE

MANUAL

INSERT

FRANÇAIS

LANGUAGE

ENGLISH

MENU : EXIT

DISPLAY : BACK

OK / : SELECT



ﻲﺑﺮﻋ ﯽﺳﺭﺎﻓ

INSERT / DELETE

CH 02

CH 05 CH 06 CH 07 CH 08

CH 04

3 4 5 6

EDIT

PR CH/CC

CH03

DISPLAY : BACK

STORE

CH 02

CH 05 CH 06 CH 07 CH 08

CH 04

3 4 5 6

EDIT

PR CH/CC

MENU : EXIT

DISPLAY : BACK 0-9

CH/CC

- -

CH 02

CH 05 CH 06 CH 07 CH 08

CH 04

CH 03

3 4 5 6

EDIT

PR CH/CC

MENU : EXIT

SYSTEM

SEARCH+

FINE-

SEARCH-

FINE+

4. Searching for the channels (AUTO PROGRAM)

1. Turn on the TV.

5. Check what was registered.

3. Select the Teletext language group.

1. Select “SET UP”

1. Select item.

2. Set or adjust.

You can edit the channel list or register new channel manually.

1. Display “SET UP” menu.

2. Select item.

To complete Setup Tour

• If you want to edit channel, read the next column.

2. Start to use “SET UP” menu

MOVE

MOVE a channel position.

INSERT / DELETE a channel.

• Delete a channel by press

(Yellow)

button.

MANUAL

(Blue)

• Channel ﬁne tunning

(Yellow)

(Blue)

• If the sound is unnatural

➡

for select sound system.

1. Beginning channel search

From high frequencies

From low frequencies

(Red)

(Green)

or wait 15 seconds to run Setup Tour

JVC logo appears.

2. Select a language.

1. Select item

2. Set

To restart Setup Tour after above setup has completed.

(While the cursor is pointing to PICTURE MODE and hold for 3 seconds)

1. Select a CH/CC

2. Enter a number 0-9 buttons then, receives the broadcast signal.

• “CH/CC List” (P. 11)

1. Select item

2. Set

To stop or wait until AUTO PROGRAM finishes

3. Enter

1. Select

2. Move

Finish

Page 6

Picture Setting

1. Display “PICTURE” menu.

Sound Setting

1. Select “SOUND”

2. Start to use “SOUND” menu

• To return the sound setting to default, press the Blue button.

“MaxxAudio” is a registered trademark of Waves Audio Ltd. in the USA, Japan and other countries.

PICTURE SETTING

VNR OFF

WHITE BALANCE NORMAL

MENU PICTURE

MENU : EXIT

PICTURE MODE

USER

/ : SELECT

MaxxBass

USER

MaxxAudio

MaxxTreble

BALANCE

MaxxStereo

MENU SOUND

MENU : EXIT

/ : SELECT

AI VOLUME

OFF

CINEMA SURROUND OFF

PICTURE MODE

You can choose the desired picture setting. USER :

You can change this picture setting as you like.

(

CONTRAST, BRIGHT, SHARP, COLOUR, TINT

) VIVID : Heightens contrast and sharpness. SOFT : Softens contrast and sharpness. SHARP : To sharpen the picture. (For DVD mode) CLEAR : To softens the picture. (For DVD mode)

PICTURE SETTING

You can adjust the desired picture setting when selecting USER in PICTURE MODE.

CONTRAST : Lower

Higher

BRIGHT : Darker

Brighter

SHARP : Softer

Sharper

COLOUR : Lighter

Deeper

TINT : Reddish

Greenish

•

To return the setting to default, press the Blue button.

WHITE BALANCE

When DVD THEATER STATUS set to ON, WHITE BALANCE is not available in VIDEO-2.

You can change the white balance of the picture to better match the type of video being viewed. NORMAL : Normal white balance. COOL : Bluish white. WARM : Reddish white.

VNR

Only available in RF, VIDEO-1 and VIDEO-3.

Reduce the amount of noise in original picture. OFF : VNR is turned off. AUTO : Effect of VNR is automatically controlled. MIN : Effect of VNR becomes minimum level. MAX : Effect of VNR becomes maximum level.

AI VOLUME

Prevent sudden increase or decrease of sound when changing channels. (ON / OFF)

MaxxAudio

You can enjoy the sound setting that you like. OFF : MaxxAudio is turned off. USER : Change the sound setting as you like. (MaxxBass, MaxxTreble, MaxxStereo) MUSIC : Emphasize on music effect. THEATER : Emphasize on movie sound.

MaxxBass

Compensates low frequencies to widen the frequency band.

MaxxTreble

Compensates high frequencies to widen the frequency band.

MaxxStereo

Expands the stereo sound naturally.

BALANCE

You can change the speaker balance. (Left Stronger

Right Stronger)

CINEMA SURROUND

You can enjoy an enhanced sound for wider audience. (ON / OFF)

1. Display “SOUND” menu.

2. Select item and setting or adjust.

1. Select item.

2. Set or adjust.

1. Select “PICTURE”

2. Start to use “PICTURE” menu

3. Enter

BRIGHT

TINT

COLOUR

SHARP

PICTURE SETTING

CONTRAST

MENU : EXIT

DISPLAY : BACK

/ : SELECT

RESET

1. Select item.

2. Set or adjust.3. Enter

Page 7

Useful Functions

MENU FEATURES

MENU : EXIT

/ : SELECT

BLUE BACK OFF

BEEP OFF

PICTURE TILT

OFF TIMER

AI ECO SENSOR OFF

CHILD LOCK OFF

MENU FEATURES

ON TIMER

VIDEO-2 SETTING VIDEO

MENU : EXIT

OK / : SELECT

1. Select “FEATURES”

2. Start to use “FEATURES” menu

1. Display “FEATURES” menu.

ON TIMER

TV to turn on automatically from standby mode at a set time.

1. Select PR channel that you want to watch.

2. Set the ON TIMER to your desired period of time.

You can set the period of time to a maximum of 12 hours in 15-minute intervals. To off the ON TIMER, set ON TIMER to OFF.

Note : If TV is not in standby mode when ON

TIMER is reach the setting time, this case is not available.

OFF TIMER

TV to turn off automatically to standby mode after a set time.

You can set the period of time to a maximum of 120 minutes in 10 minutes intervals.

Note : When the remaining elapse time is

automatically to one minute, “GOOD NIGHT!” appears on the screen.

CHILD LOCK

Disables the side control buttons of the TV. (ON / OFF)

AI ECO SENSOR

You can automatically adjust TV screen contrast according to the brightness of your room to suitable level for a better eyecare. (OFF / MODE-1 / MODE-2 / DISPLAY )

• You can operate the ECO function by press

ECO

button.

BLUE BACK

Display a blue screen and mute the sound when the signal is weak or absent. (ON / OFF)

PICTURE TILT

You can correct the picture tilt caused by the earth’s magnetic force.

2. Select item and setting or adjust.

1. Select item.

2. Set or adjust.3. Enter

PR 01

ON TIMER

ON TIMER 00:15

MENU : EXIT

DISPLAY : BACK

/ : SELECT

2. Set or adjust.

1. Select item

2. Set or adjust.

1. Select PR channel

OFF TIMER 10

PICTURE TILT

MENU : EXIT

DISPLAY : BACK

1. Tilt the picture becomes level

To conﬁrm

1. Select a time in minutes by press ( / ) button.

Page 8

Useful Functions (continued)

BEEP

You can use the BEEP function to alert you during AUTO SIGNAL DETECT, AI ECO SENSOR Detect, Stereo Detect, ON TIMER / OFF TIMER operations and when some buttons on the remote control are pressed. (ON / OFF)

COLOUR SYSTEM

You can select the appropriate colour system when the picture is not clear or no colour appears. (RF mode : AUTO / PAL / SECAM / NTSC 3.58) (VIDEO mode :

AUTO / PAL / SECAM / NTSC 3.58 /

NTSC 4.43)

1. Display “SET UP” menu.

• You can operate the COLOUR SYSTEM function by press

COLOUR

button.

SOUND SYSTEM

You can select an appropriate sound system when abnormal sound occurs even when the picture appears normal. (B/G, I, D/K, M)

• You can operate the SOUND SYSTEM function by press

SOUND

button.

2. Start to use “SET UP” menu

1. Select “SET UP”

COLOUR SYSTEM PAL

AUTO PROGRAM

MENU SET UP

EDIT / MANUAL

LANGUAGE TEXT LANGUAGE

MENU : EXIT

/ : SELECT

Colour and Sound system in your country or region.

Area Country or Region

Sound

system

Colour

system

Asia,

Middle East

Bahrain , Kuwait, Oman, Qatar, United Arab Emirates, Yemen, Indonesia, Malaysia, Singapore, Thailand, India, etc.

B/G

PAL

China, Vietnam, etc. D/K

Hong Kong, etc. I

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM

Philippines, Taiwan, Myanmar, etc. M NTSC

Europe

Russia, etc.

D/K

SECAM

Czech Republic, Poland, etc.

PALGermany , Holland, Belgium , etc. B/G

UK, etc. I

Oceania Australia, New Zealand, etc. B/G PAL

Africa

Republic of South Africa, etc. I

PAL

Nigeria, etc.

B/G

Egypt, Morocco , etc. SECAM

Page 9

You can watch the Teletext broadcast channel with TEXT functions.

TV mode ➝ TEXT mode ➝ MIX mode

TEXT

2. Select other Teletext pages.

OR OR

TEXT

TV/VIDEO

to return to the TV mode.

You can also operate the teletext using the following buttons:

Teletext operation

(Hold)

Hold a teletext page. To Cancel, press the button again.

(Reveal)

Display the hidden text (example: answers to a quiz). To Cancel, press the button again.

(Size)

Enlarge the teletext display.

(Index)

Return to the index page instantly.

(Cancel)

Watch TV programme while waiting for a teletext page. When the teletext page is found, a page number appears at the upper left of the screen. Press the button to view the teletext page.

(Sub-page)

Sub-page numbers are displayed at the left of the screen. To cancel sub-page function, press the button again.

GROUP-1

English, German, Swedish, Finnish, Danish, Hungarian, Italian, French, Spanish, Portuguese, Turkish

GROUP-2

Polish, German, Estonian, Slovenian, Czech, Slovakian, Rumanian

GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian

GROUP-4

English, Polish, French, Turkish, Arabic, Farsi

1. Display “SET UP” menu.

1. Select “SET UP”

2. Start to use “SET UP” menu

2. Select item.

You can set the Teletext language group that corresponds to the programmes.

TEXT LANGUAGE

1. Select “TEXT LANGUAGE”

2. Set Text language group.

COLOUR SYSTEM PAL

AUTO PROGRAM

MENU SET UP

EDIT / MANUAL

TEXT LANGUAGE

LANGUAGE

MENU : EXIT

OK / : SELECT

• Only available AV-29SX28.

Page 10

VIDEO-2 SETTING

OFF TIMER

AI ECO SENSOR OFF

CHILD LOCK OFF

MENU FEATURES

ON TIMER

VIDEO-2 SETTING VIDEO

MENU : EXIT

/ : SELECT

Switch between video and component signal (VIDEO / COMPONENT)

1. Select “FEATURES” menu.

1. Select “VIDEO-2 SETTING”

2. Set to VIDEO or COMPONENT

2. Select “VIDEO-2 SETTING”. Then set to VIDEO or COMPONENT.

1. Select “FEATURES”

2. Start to use “FEATURES” menu

AUTO SIGNAL DETECT

Automatically change the input mode to

Video-2 when the DVD input signal is detected. Automatically change the input mode to RF previous input mode when the DVD input signal is not detected. (ON / OFF)

DVD THEATER STATUS

Enjoy an enhanced picture quality for movie

playback in a dark room, like watching a movie in the theater. (ON / OFF)

Function for watching DVDs

PICTURE SETTING

DVD THEATER STATUS ON

AUTO SIGNAL DETECT ON

DVD MENU PICTURE

MENU : EXIT

PICTURE MODE

USER

/ : SELECT

Available for component signal only.

1. Select “DVD MENU PICTURE” menu.

1. Select item.

2. Set or adjust.

2. Select item and setting.

1. Select “DVD MENU PICTURE”

2. Start to use

“DVD MENU PICTURE” menu

Watching Video or DVDs

• When you set DVD THEATER STATUS set to ON, AI ECO SENSOR and WHITE BALANCE adjustment become unavailable.

Only available in VIDEO-2 mode.

• You can operate the DVD function by press

DVD MENU

button.

Page 11

CH / CC List

To use the INSERT function (P. 5), ﬁnd the “CH/CC” number corresponding to the TV’s channel number from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc. AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.

CC 24 K S-24 CC 25 L S-25 CC 26 M S-26 CC 27 N S-27 CC 28 O S-28 CC 29 P S-29 CC 30 Q S-30 CC 31 R S-31 CC 32 S S-32 CC 33 T S-33 CC 34 U S-34 CC 35 V S-35 CC 36 W S-36 CC 37 W+1 S-37 CC 38 W+2 S-38 CC 39 W+3 S-39 CC 40 W+4 S-40 CC 41 W+5 S-41 CC 42 W+6 CC 43 W+7 CC 44 W+8 CC 45 W+9 CC 46 W+10 CC 47 W+11 CC 48 W+12 CC 49 W+13 CC 50 W+14 CC 51 W+15 CC 52 W+16 CC 53 W+17 CC 54 W+18 CC 55 W+19 CC 56 W+20 CC 57 W+21 CC 58 W+22 CC 59 W+23 CC 60 W+24 CC 61 W+25 CC 62 W+26 CC 63 W+27 CC 64 W+28 CC 75 X CC 76 Y R3 CC 77 Z R4 AU-3 CC 78 Z+1 R5 CC 79 Z+2 AU-4 CC 95 A-5 CC 96 A-4 CC 97 A-3 CC 98 A-2 CC 99 A-1

CH 48 US-48, W+63 E48 CH 49 US-49, W+64 E49 CH 50 US-50, W+65 E50 CH 51 US-51, W+66 E51 CH 52 US-52, W+67 E52 CH 53 US-53, W+68 E53 CH 54 US-54, W+69 E54 CH 55 US-55, W+70 E55 CH 56 US-56, W+71 E56 CH 57 US-57, W+72 E57 CH 58 US-58, W+73 E58 CH 59 US-59, W+74 E59 CH 60 US-60, W+75 E60 CH 61 US-61, W+76 E61 CH 62 US-62, W+77 E62 CH 63 US-63, W+78 E63 CH 64 US-64, W+79 E64 CH 65 US-65, W+80 E65 CH 66 US-66, W+81 E66 CH 67 US-67, W+82 E67 CH 68 US-68, W+83 E68 CH 69 US-69, W+84 E69

Channel

US CCIR OIRT AUSTRALIA

CC 01 S-1 AU-5 CC 02 S-2 CC 03 S-3 CC 04 S-4 CC 05 S-5 CC 06 S-6 AU-5A CC 07 S-7 CC 08 S-8 CC 09 S-9 CC 10 S-10 CC 11 S-11 CC 12 S-12 CC 13 S-13 CC 14 A S-14 CC 15 B S-15 CC 16 C S-16 CC 17 D S-17 CC 18 E S-18 CC 19 F S-19 CC 20 G S-20 CC 21 H S-21 CC 22 I S-22 CC 23 J S-23

Channel

US CCIR OIRT AUSTRALIA

CH 02 US-02 E2 R1 AU-0 CH 03 US-03 E3 AU-1 CH 04 US-04 E4 R2 AU-2 CH 05 US-05 E5 R6 AU-6 CH 06 US-06 E6 R7 AU-7 CH 07 US-07 E7 R8 AU-8 CH 08 US-08 E8 R9 AU-9 CH 09 US-09 E9 CH 10 US-10 E10 R10 AU-10 CH 11 US-11 E11 R11 AU-11 CH 12 US-12 E12 R12 CH 13 US-13 CH 14 US-14, W+29 CH 15 US-15, W+30 CH 16 US-16, W+31 CH 17 US-17, W+32 CH 18 US-18, W+33 CH 19 US-19, W+34 CH 20 US-20, W+35 CH 21 US-21, W+36 E21 CH 22 US-22, W+37 E22 CH 23 US-23, W+38 E23 CH 24 US-24, W+39 E24 CH 25 US-25, W+40 E25 CH 26 US-26, W+41 E26 CH 27 US-27, W+42 E27 CH 28 US-28, W+43 E28 CH 29 US-29, W+44 E29 CH 30 US-30, W+45 E30 CH 31 US-31, W+46 E31 CH 32 US-32, W+47 E32 CH 33 US-33, W+48 E33 CH 34 US-34, W+49 E34 CH 35 US-35, W+50 E35 CH 36 US-36, W+51 E36 CH 37 US-37, W+52 E37 CH 38 US-38, W+53 E38 CH 39 US-39, W+54 E39 CH 40 US-40, W+55 E40 CH 41 US-41, W+56 E41 CH 42 US-42, W+57 E42 CH 43 US-43, W+58 E43 CH 44 US-44, W+59 E44 CH 45 US-45, W+60 E45 CH 46 US-46, W+61 E46 CH 47 US-47, W+62 E47

Page 12

Troubleshooting

No picture, no sound Page

Deactivate the BLUE BACK function if it is turned on. 7

Choose the appropriate sound system. Refer to “SOUND SYSTEM”. 8

Snowy picture

Check the aerial cable and TV connections. 3

Stripes appear on the picture

Interference caused by devices such as an ampliﬁer, personal computer, or a hair drier. Move it away from your TV.

Double-pictures (ghosting) occur

Interference occurs caused by signal reﬂecting from mountains or building. Try to adjust the aerial’s direction or use another antenna.

Poor picture

Choose the appropriate colour system. Refer to “COLOUR SYSTEM”. 8

Adjust the COLOUR or BRIGHT setting. Refer to “PICTURE SETTING”. 6

White and bright still image look as if it was coloured

Inevitable phenomenon due to the nature of the picture tube. This is not a malfunction.

Top of the image from software products or video tape is distorted

Due to the condition of the video signal, the image was not properly recorded. This is not a malfunction.

Poor sound

Adjust the sound frequency properly. Refer to “SOUND SYSTEM”. 8

Cannot operate the remote control

The batteries may be exhausted. Replace with new batteries. Ensure that you are operating the remote control at less than seven meters from the front of your TV.

Cannot operate the menus

Press TV/VIDEO button to return to TV mode and try operating the menus.

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

Cannot operate the front control buttons Page

Deactivate the CHILD LOCK function if it is turned on. 7

Colour patches appear at the corner of the screen

This maybe due to magnetized device such as a speaker placed near to your TV. Move it away from your TV. Alternatively, you can also use the magnetic shielded speaker.

Picture is tilted

This maybe due to the earth magnetism. To “PICTURE TILT” to correct the tilt.

Image takes a short period to be displayed

Image required time to stabilize before display. This is not a malfunction. --

TV may emit crackling sound

This is due to a sudden change in temperature and it is not a malfunction. If the crackling sound is too frequent, request your service technician for inspection.

Feel a slight electric shock when touching the TV screen

This is due to the static electricity of the picture tube and it will not harm the human body. This is not a malfunction.

AUTO SIGNAL DETECT does not work

Set the AUTO SIGNAL DETECT function to ON. Turn the VCR or DVD Player off and on again. Check that the video cable connection on VIDEO-2 is properly connected.

Suddenly, the TV input changes to VIDEO-2

Check whether the AUTO SIGNAL DETECT function is on or off. AUTO SIGNAL DETECT function may work when you operate the VCR or DVD player even if you do not make it to playback.

AUTO SIGNAL DETECT does not work correctly

Check the video cable connection. Some VCR or DVD player may output the video signal discontinuously. If this happens, AUTO SIGNAL DETECT function cannot work correctly.

Page 13

Speciﬁcation

TV RF systems B, G, I, D, K, M

Colour systems (RF mode) PAL, SECAM, NTSC 3.58 MHz

(VIDEO mode) PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz

Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)

Receives cable channels in mid band, super band and hyper band.

Power requirements AC 110 to 240 V, 50 Hz / 60 Hz

External input / output VIDEO-1 VIDEO input, AUDIO L/R input

VIDEO-2/COMPONENT VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input

VIDEO-3 VIDEO input, AUDIO L/R input

OUTPUT VIDEO output, AUDIO L/R output

Headphone jack Stereo mini jack (3.5 mm diameter)

Teletext system FLOF (Fastext), WST (World Standard Text)

Design and specifications subject to change without notice.

Page 14

MEMO

Page 15

MEMO

Page 16