JVC AV-29QS27, AV-29QX17, AV-29QX17B, AV-29RS28, AV-29RX18 User Manual

...

Download

Page 1

COLOUR TELEVISION

INSTRUCTIONS

ENGLISH

AV-29QS27 AV-29QX17 AV-29QX17B AV-29RS28 AV-29RX18 AV-29RX58 AV-29RX78 AV-29SS27 AV-29SX57

This illustration shows AV-29SX77.

The illustrations of AV-29SX77 is used in this instruction manual for explanation purpose. Your TV may not look exactly the same as illustrated.

AV-29SX77

AV-21QS27 AV-21QX17 AV-21QX17B AV-21RS28 AV-21RX18 AV-21RX58 AV-21RX78 AV-21SS27 AV-21SX57 AV-21SX77

GGT0153-001A-H

Page 2

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

Thank you for buying this JVC colour television.

TO PREVENT FIRE OR SHOCK HAZARD, DO

WARNING

• Operate only from the power source indicated on the rear of the TV.

• Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug. Do not pull on the power cord.

• This TV can be turned on/off power by connecting/ disconnecting the AC plug into AC outlet. While this TV is being installed, enough space should be reserved for connection/disconnecting the AC plug into AC outlet by hand.

fault, unplug the unit and

call a service technician. Do

not attempt to repair it yourself

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

In the event of a

or remove the

rear cover.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

• Do not allow objects or liquid into the cabinet openings.

TO ENSURE PERSONAL SAFETY, OBSERVE THE

CAUTION

• Never block or cover the ventilation openings.

• Never install the TV where good ventilation is unattainable.

• When installing this TV, leave spaces for ventilation around

• The surface of the TV screen is easily

FOLLOWING RULES REGARDING THE USE OF THIS TV.

the TV of more than the minimum distances as shown.

damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

Page 3

Knowing your TV’s features

Please see the chart below and check the function are equipped for your TV's model number. The model number is indicated at the rear of your TV. When you press a button concerned to a function that is not available for your TV, it does not work and the logo "Ø" appears on the screen.

Model No.

Function

AV-21SS27

AV-29SS27

AV-29SX57

AV-29RS28

AV-29RX18

AV-29RX58

AV-29QS27

AV-29QX17

AV-29QX17B

•

I/II (STEREO/I†II) PIP control buttons (Green label) – – – – – TELETEXT control buttons (Black label) PICTURE TILT MaxxBass – – – AI ECO SENSOR – – – ECO MODE

Features Descriptions

DVD MENU Just connect DVD player to the television. The television will detect DVD signal and

MaxxBass MaxxBass enhances bass sound that cannot be reproduced by normal speakers to be

PIP (Picture in Picture) You can view two screens (Main picture and Sub picture) at the same time. TELETEXT You can view teletext programmes which are broadcasted by some TV channels. Teletext

FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press. A2/NICAM

(STEREO / I AI ECO SENSOR TV detects the brightness of your room and automatically adjust the picture brightness to

ECO MODE You can adjust TV screen contrast according to the brightness of your room to suitable

AI VOLUME TV adjusts the volume automatically for all TV channels to avoid sudden change of the

TINT You can adjust TINT setting for all colour systems, including PAL.

II)

†

display picture on the screen automatically and you can adjust pictures and sound while you are watching DVD as your desire. When disconnect DVD player, the television will display the previous channel.

heard by our ears.

programme is an information in text form.

You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 or NICAM Sound-multiplex system.

a suitable level for a better eyecare.

level for a better eyecare.

volume when selecting different TV channels or selecting Video Mode.

––•–––•––•––•–––•––

•

––•––

••••••••••

•••

•••••••

–––––––

AV-29RX78

••–••

AV-29SX77

AV-21QS27

–––––

–––––––––– ––– –––

•••

AV-21RS28

AV-21QX17

––•––

AV-21RX18

AV-21QX17B

••–••

•••••••

–––––––

AV-21RX58

Note : Some functions written in this instruction manual may not be available for your TV.

AV-21SX57

AV-21RX78

••–•

Knowing your TV’s features ...................3

Connections ..........................................4

Initial settings .........................................5

Remote control buttons and basic

functions ................................................6

TV buttons and functions .......................7

AV-21SX77

Operating the menus .............................7

Picture setting ........................................9

Picture in picture (PIP) operation ........10

Teletext operation ................................11

Sound setting ......................................11

Customized setting ..............................13

TV channel presetting .........................15

Troubleshooting ...................................17

Specifications ......................................18

PREPARATION FUNCTIONS REFERENCE

Page 4

Connections

The illustration of AV-29SX77 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated.

CAUTION

Ensure to turn off all equipments including the TV before connecting the AC mains plug to the AC outlet.

Connecting to the aerial cable and VCR

TV rear terminals

Rear of VCR

Audio output

Video output

S-video output

Aerial cable

RF input

(Connect directly if not using a VCR)

RF output

(Connect via a VCR)

VHF/UHF outdoor aerial

75-ohm coaxial cable (not supplied)

Connecting to the rear component/video input terminal and output terminal

VCR (for playing) DVD player (composite signals)

DVD player (with component video signals input)

VCR (for recording)

• When connecting to COMPONENT (VIDEO-2) input, depending on the connection, choose the appropriate video input using the menu (\ page 14).

Connecting to the front video input terminal

RVL/MONO

IN(VIDEO-3)

Headphones

After all the connections have been made, insert the mains plug to the AC outlet.

Camcorder or TV game

Page 5

Initial settings

Turn on the TV

or wait 15 seconds to run Setup Tour

JVC logo appears

Select a language

LANGUAGE

ENGLISH

FRANÇAIS

OK / : SELECT DISPLAY : BACK MENU : EXIT

Select the Teletext language group

TEXT LANGUAGE



This on screen of Language menu and Text Language menu are used

TEXT LANGUAGE

GROUP–1

GROUP–2

GROUP–3

GROUP–4

OK / : SELECT DISPLAY : BACK MENU : EXIT



Select

Confirm



Select

Confirm and proceed to AUTO

PROGRAM

For details, \ page 11.

for explanation purpose only. Your TV may not show the same as this on screen.

Searching for the channels (AUTO PROGRAM)

AUTO PROGRAM

22%

OK / : EDIT

To stop or wait until AUTO PROGRAM finishes

Edit the channel list

%$)4

02  #(## !6

  #(   #(   #(   #(   #(   #(

-/6%  -%.5%8)4

).3%24

$%,%4%

-!.5!,

To edit the channel list, \ page 15.

To complete Setup Tour

To restart Setup Tour after above setup has completed

(while the cursor is pointing to PICTURE MODE and within 3 seconds)

PREPARATION

Page 6

Remote control buttons and basic functions

• Insert two batteries by following the and polarities and inserting the end first.

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use.

Operating the menus (\ page 7)

• Display the programme or video terminal number and stereo/bilingual broadcast system.

• To return to the previous menu

RETURN PLUS function

Return to the frequently viewed channel.

Choose the channel you want to programme

Press and hold

To cancel

RETURN PLUS

PROGRAMMED!

Turn the TV on from standby and vice versa

Programme and recall 4 favourite channels

(colour buttons: red, green, yellow, blue)

Choose the TV channel you wish to programme

Press and hold

any button

Repeat to programme another favourite channel.

To recall the favourite channel, press the

corresponding colour button.

• When the TV is in Text function or MENU mode, the favourite channel function is not available.

• When the TV is in PIP function, the favourite channel function cannot be programmed but can recall the favourite channel.

TV or video terminal input selection, Exit from the menu

Turn the volume Off / On

Programme number selection

For two digits :

PROGRAMMED! ■

Press and hold

RETURN function

If you have not set or have canceled the RETURN PLUS channel, this will return to the previously viewed channel.

RETURN PLUS

CANCELED!

Adjust the volume level, Turn off Muting

Channel selection

Select the desired channel number.

For Hyper Scan

Press and hold

PR changes without changing the picture. Once you stop pressing CHANNEL+ or CHANNEL– button, picture will change to the desired PR.

Page 7

TV buttons and functions

The illustration of AV-29SX77 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated.

TV or Video terminal input selection, Exit from the menu

Display the menu and exit after finish setting

ECO sensor

Remote control sensor

Power lamp - Indicates the TV’s status. No colour: TV’s main power is being turned off. Red: TV’s main power is turned on. Blink: While the TV is in standby mode, ON TIMER function is in used.

While the TV is in turn on mode, OFF TIMER function is in used. Note: When you turn off the power switch while TV is in standby mode, the power lamp will go off in 5-10 seconds. When you operate the TV, POWER Lamp will blink.

TV’s main power on/off

Channel selection, To select menu function

Volume level adjustment, To choose a Top menu and adjust the desired menu function

Operating the menus

TOP menuMENU 2nd menu 3rd menu

Example:

SET UP menuMENU EDIT/MANUAL EDIT

PREPARATION

Video and audio input jacks for VIDEO-3 mode

Headphone jack

To display the MENU.

To select a Top menu. To select a second menu. To select, adjust or

Select

When the cursor is at MENU.

To display other pages.

To return to the previous menu.

To select for go to third menu.

Select

Adjust

Depend to the on screen guide.

choose the setting of a function.

Select

Depend to the on screen guide.

To exit.

Page 8

Operating the menus (continued)

You can use the DVD MENU by switch channel to VIDEO-2. See the menus location in the below table.

Top menu Page 2nd menu 3rd menu / Adjustments 3rd menu / Adjustments

PICTURE MODE USER / VIVID / SOFT

PICTURE

DVD MENU

PICTURE

SOUND

DVD MENU

SOUND

FEATURES

SET UP

PICTURE SETTING

WHITE BALANCE NORMAL / COOL / WARM

VNR

(Only available in RF, VIDEO-1 and VIDEO-3)

AUTO SIGNAL DETECT

(Only available in VIDEO-2)

DVD THEATER STATUS

(Only available in VIDEO-2)

STEREO / I.II (Only available in RF) AI VOLUME ON / OFF ON / OFF

SOUND MODE USER / MUSIC / CINEMA / NEWS USER / MUSIC / CINEMA / DRAMA

EQUALIZER (SOUND MODE set to USER

and CINEMA SURROUND set to OFF only)

BALANCE Left Stronger / Right Stronger Left Stronger / Right Stronger

CINEMA SURROUND ON / OFF ON / OFF

MaxxBass OFF / HIGH / LOW OFF / HIGH / LOW

ON TIMER Set timer for turn on the TV Set timer for turn on the TV

OFF TIMER Set timer for turn off the TV Set timer for turn off the TV

CHILD LOCK ON / OFF ON / OFF

COMPRESS (16:9 ) ON / OFF ON / OFF

AI ECO SENSOR or

ECO MODE

VIDEO-2 SETTING VIDEO / COMPONENT VIDEO / COMPONENT

BLUE BACK ON / OFF ON / OFF

PICTURE TILT Tilt the picture. Tilt the picture.

BEEP ON / OFF ON / OFF

AUTO PROGRAM Register the TV channel. Register the TV channel.

EDIT / MANUAL MOVE / INSERT / DELETE / MANUAL MANUAL / MOVE / DELETE / INSERT

COLOUR SYSTEM AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43

LANGUAGE Select the languages. Select the languages.

TEXT LANGUAGE Select the Text language. Select the Text language.

PICTURE MODE set to USER : CONTRAST / BRIGHT/ SHARP/ COLOUR / TINT PICTURE MODE set to SOFT or VIVID:

OFF / AUTO / MIN / MAX

–

/ / I / II

Adjust the sound level of each frequencies. Adjust the sound level of each frequencies.

OFF / MODE-1 / MODE-2 / DISPLAY or OFF / ECO-1 / ECO-2

For RF / Video-1 / Video-3 (MENU) For Video-2 (DVD MENU)

DVD THEATER STATUS set to OFF : USER / SHARP / CLEAR / VIVID / SOFT DVD THEATER STATUS set to ON : USER / SHARP / CLEAR

PICTURE MODE set to USER : CONTRAST / BRIGHT/ SHARP / COLOUR / TINT

–

PICTURE MODE set to SHARP or CLEAR or SOFT or VIVID :

DVD THEATER STATUS set to OFF : NORMAL / COOL / WARM DVD THEATER STATUS set to ON :

–

ON / OFF

–

DVD THEATER STATUS set to OFF : OFF / MODE-1 / MODE-2 / DISPLAY or OFF / ECO-1 / ECO-2 DVD THEATER STATUS set to ON :

ViDEO-2 SETTING set to COMPONENT : AUTO ViDEO-2 SETTING set to VIDEO : AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43

–

* For DVD THEATER STATUS set to ON only

–

Page 9

Picture setting

COLOUR SYSTEM

You can select the appropriate colour system when the picture is not clear or no colour appears.

You can also operate this function from the menu.

For the colour system in each country or region, see the table below:

Area Country or Region System

Asia, Middle East

Europe

Oceania Australia, New Zealand, etc. PAL

Africa

WHITE BALANCE

You can change the white balance of the picture to better match the type of video being viewed.

NORMAL Normal white balance COOL Bluish white WARM Reddish white

When DVD THEATER STATUS set to ON, WHITE BALANCE is not available. \ Page 8.

COMPRESS (16:9)

You can convert a normal picture (4:3 aspect ratio) into a wide picture (16:9 aspect ratio).

AUTO → PAL → SECAM → NTSC3.58 → NTSC4.43

SET UP menuMENU COLOUR SYSTEM

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, Indonesia, Malaysia, Singapore, Thailand, India, China, Vietnam, Hong Kong, etc.

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM

Philippines, Taiwan, Myanmar, etc. NTSC

Russia, etc. SECAM

Czech Republic, Poland, Germany, Holland, Belgium, UK, etc. PAL

Republic of South Africa, Nigeria, etc. PAL

Egypt, Morocco, etc. SECAM

PICTURE menuMENU WHITE BALANCE

FEATURES menuMENU

COMPRESS (16:9)

(Choose ON or OFF)

PAL

PICTURE MODE

You can choose the desired picture setting with one-touch.

USER You can change this picture setting (CONTRAST,

SHARP To sharpen this picuture. VIVID Heightens contrast and sharpness. SOFT Softens contrast and sharpness. CLEAR To soften the picture.

BRIGHT, SHARP, COLOUR, TINT) as you like. (\ PICTURE SETTING)

You can also operate this function from the menu.

PICTURE menuMENU PICTURE MODE

To return the USER setting to default, press the blue button when the PICTURE SETTING menu is displayed. See details for the location menus in "Operating the menus"

\ Page 8.

PICTURE SETTING

You can adjust the desired picture setting when selecting USER in PICTURE MODE.

1 2

CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker 3 : Brighter SHARP 2 : Softer 3 : Higher COLOUR 2 : Lighter 3 : Deeper TINT 2 : Reddish 3 : Greenish

PICTURE menuMENU PICTURE MODE USER

PICTURE menuMENU PICTURE SETTING

See details for the location menus in “Operating the menus” \ Page 8.

BLUE BACK

You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna.

FEATURES menuMENU BLUE BACK

This function is only available in RF mode.

(Choose ON or OFF)

FUNCTIONS

Page 10

Picture setting (continued)

AI ECO SENSOR (ECO)/ECO MODE

You can automatically adjust TV screen contrast according to the brightness of your room.

OFF Cancel the function. MODE-1/ECO-1 Mild contrast (recommended). MODE-2/ECO-2 Even contrast. DISPLAY (for Al ECO SENSOR only) Display the graphic of the function.

You can also operate this function from the menu.

FEATURES menuMENU AI ECO SENSOR / ECO MODE

Note: Al ECO SENSOR for S and R series.

ECO MODE for Q series.

When DVD THEATER STATUS set to ON, Al ECO SENSOR / ECO MODE is not available.

\ Page 8.

Correcting the Slanting Picture (PICTURE TILT)

You can correct the picture tilt caused by the earth’s magnetic force.

FEATURES menuMENU PICTURE TILT

The following display appears.

PICTURE TILT

DISPLAY : BACK

MENU : EXIT

Tilt the picture becomes level

Picture in picture (PIP) operation

You can display a sub picture within the main picture on the screen.

to display the sub picture.

You can hear the sound from the main picture only.

When main picture and sub picture are the same TV channel:

Press SUB-P -/+ Main picture will be changed TV channel follow as sub

(Input) To change sub picture to video mode.

Press

Press CHANNEL -/+ Sub picture will be changed TV channel follow as Main

Press CHANNEL -/+ Until main picture change to video mode.

To cancel, press the PIP button again.

While a sub picture is being displayed, you can perform the following functions.

(SUB-P)

(Input) Select the input source for the sub picture. (Swap) Swap between the main picture and sub picture. (Position) Change the sub picture position.

(Freeze) Freeze the sub picture.

When VIDEO-2 is set to component, you cannot select VIDEO-2 for sub picture. When VIDEO-2 is set to component and if the input source of the main picture is set to VIDEO-2 with component, PIP button is disabled and sub picture cannot be displayed.

picture.

Select the desired TV channel for sub picture.

lower right → lower left

upper right → upper left

To confirm

Page 11

Teletext operation Sound setting

TELETEXT

You can watch the Teletext broadcast channel with TEXT function.

TV mode → TEXT twin mode → TEXT mode

2 Selecting other Teletext pages.

OR OR

You can also operate the teletext using the following buttons:

(Hold) Hold a teletext page.

(Reveal) Display the hidden text (example: answers to a quiz).

(Size) Enlarge the teletext display. (Index) Return to the index page instantly. (Cancel) Watch TV programme while waiting for a teletext page.

(

Sub-page

TEXT LANGUAGE

You can set the Teletext language group that corresponds to the programmes.

GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian, Italian,

GROUP-2 Polish, German, Estonian, Slovenian, Czech, Slovakian, Rumanian GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian GROUP-4 English, Polish, French, Turkish, Arabic, Farsi

Depending on the broadcast, the language set may not display properly (\ page 5).

To cancel, press the button again.

When the teletext page is found, a page number appears at the upper left of the screen. Press the button to view the teletext page.

) Sub-page numbers are displayed at the left of the screen.

To cancel sub-page function, press the button again.

SET UP menuMENU TEXT LANGUAGE

French, Spanish, Portuguese, Turkish

to return to the TV mode.

MaxxBass

You can enjoy an enhanced bass sound which cannot be played by normal speakers.

You can also operate this function from the menu.

SOUND menuMENU MaxxBass

"MaxxBass" is a registered trademark of Waves Audio Ltd. in the USA, Japan and other countries.

CINEMA SURROUND

You can enjoy an enhanced sound for wider audience.

You can also operate this function from the menu.

SOUND menuMENU

EQUALIZER

You can adjust the sound level of each frequencies when selecting USER mode in SOUND MENU.

1 2

SOUND menuMENU SOUND MODE USER

SOUND menuMENU EQUALIZER

3 Select and adjust the desired frequencies.

Adjust high frequency will affect higher pitch sound and vice versa. When CINEMA SURROUND set to ON, you cannot adjust EQUALIZER (\ page 8).

OFF MaxxBass is turned off. HIGH MaxxBass effect is high. LOW MaxxBass effect is low.

OFF Cancel the function. ON Listen to sound with wider audience effect.

CINEMA SURROUND

%15!,):%2

))

))))))))

)

)))))))

)))))))))))))

  + + +(Z

  3%,%#4 $)30,!9"!#+

-%.5%8)4

FUNCTIONS

Page 12

Sound setting (continued)

STEREO / IßII ( I/II)

You can enjoy the stereo and bilingual broadcasted programmes.

Select stereo sound.

This function is only available in RF mode. You can also operate this function from the menu.

SOUND menuMENU

Select monaural sound.

Select bilingual I (sub I). Select bilingual II (sub II).

STEREO/I

†

AI VOLUME

You can adjust the volume of all the channels and video inputs to the same level automatically depends on the strength of signal of the sources.

SOUND menuMENU AI VOLUME

(Choose ON or OFF)

SOUND SYSTEM

You can select an appropriate sound system when abnormal sound occurs even when the picture appears normal.

B/G → I → D/K → M

BALANCE

You can adjust the volume balance between the left and right speakers.

SOUND menuMENU BALANCE

SOUND MODE

You can choose the desired sound setting.

USER Change the sound setting as you like.

CINEMA Emphasize on movie sound. MUSIC Emphasize on music effect. NEWS Emphasize on vocal sound. DRAMA Emphasize on drama sound.

Select USER and adjust the frequencies in EQUALIZER (100, 300, 1K, 3K, 8K Hz), \ page 11.

You can also operate this function from the menu.

SOUND menuMENU SOUND MODE

When SOUND MODE is set to other than USER, EQUALIZER function becomes unavailable.

See details for location menus in "Operating the menus"

\ Page 8.

This function is not available in video mode. For the sound system in each country or region, see the table below:

Area Country or Region System

Asia, Middle East

Europe

Oceania Australia, New Zealand, etc. B/G

Africa

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, Indonesia, Malaysia, Singapore, Thailand, India, etc.

China, Vietnam, etc. D/K

Hong Kong, etc. I

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G

Philippines, Taiwan, Myanmar, etc. M

Russia, Czech Republic, Poland, etc. D/K

Germany, Holland, Belgium, etc. B/G

UK, etc. I

Republic of South Africa, etc. I

Nigeria, Egypt, Morocco, etc. B/G

B/G

Page 13

Customized setting

AUTO SIGNAL DETECT

When the DVD input signal is detected, the input mode will automatically change to VIDEO-2 and when the DVD input signal is not detected, the input mode will automatically change to RF previous input mode. DVD players: Press the “POWER ON” button on the player for signal detection. VCRs: Press the “POWER ON” button on the device, followed by the “PLAY” button, signal detection and DVD menu display.

PICTURE menuMENU

AUTO SIGNAL

DETECT

Only available in VIDEO-2 mode. \ Page 8.

(Choose ON or OFF)

VNR

You can reduce the picture noise.

PICTURE menuMENU VNR

OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level.

If you select MAX, the picture becomes softer even if the original picture is sharp. Only available in RF, VIDEO-1 and VIDEO-3. \ Page 8.

DVD THEATER STATUS

You can enjoy an enhanced picture quality for movie playback in a dark room, like watching a movie in the theater.

PICTURE menuMENU

OFF Cancel the function. ON Enjoy movie playback with suitable colour temperature, sharp

subtitles and improved gradation for black, like in a theater.

When you set DVD THEATER STATUS to ON, Al ECO SENSOR / ECO MODE and WHITE BALANCE adjustment become unavailable.

Only available in VIDEO-2 mode.

DVD THEATER

STATUS

\ Page 8.

LANGUAGE

You can choose the desired on screen display language.

SET UP menuMENU LANGUAGE

FUNCTIONS

Page 14

Customized setting (continued)

ON TIMER

You can set the TV to turn on automatically from standby mode at a set channel and time.

FEATURES menuMENU ON TIMER

/.4)-%2

02  /.4)-%2

  3%,%#4 $)30,!9"!#+

-%.5%8)4



2 Choose the PR (channel) that you want to watch when the TV turns on. External input, AV position and any un-preset channel cannot be

chosen for PR.

3 Set the ON TIMER to your desired period of time. When the ON TIMER is set to other than 00:00, the ON TIMER is

activated. You can set the period of time to a maximum of 12 hours in 15-minute intervals.

4 To off the ON TIMER, set the time to 00:00.

Note: If TV is not in standby mode when ON TIMER is reach the setting

time, this case is not available.

OFF TIMER

You can set the TV to turn off automatically to standby mode after a set time.

FEATURES menuMENU OFF TIMER

OFF TIMER 10

2 You can set the period of time to a maximum of 120 minutes in 10

minutes intervals.

3 When the remaining elapse time is one minute, “GOOD NIGHT!”

appears on the screen.

4 You can display the OFF TIMER screen again to confirm or change the

remaining time.

5 To off the OFF TIMER, select OFF or turn off the TV’s main power.

BEEP

You can use the BEEP function to alert you during AUTO SIGNAL DETECT, Al ECO SENSOR Detect, Stereo Detect, ON TIMER/OFF TIMER operations and when some buttons on the remote control are pressed.

MENU BEEP

FEATURES menu

(Choose ON or OFF)

CHILD LOCK

You can disable the front control buttons of the TV.

FEATURES menuMENU CHILD LOCK

(Choose ON or OFF)

VIDEO-2 SETTING

You can set the VIDEO-2 SETTING according to the video signal output from external devices connected to the VIDEO-2 terminal.

FEATURES menuMENU VIDEO-2 SETTING

VIDEO If a normal video signal (composite video signal) is input. COMPONENT If a component video signal (Y/CB/CR) is input.

You must choose a setting according to the signal that you input to VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you must set VIDEO-2 SETTING to VIDEO.)

For connection, \ page 4.

(Factory setting is COMPONENT)

Page 15

TV channel presetting

To register the TV channels automatically (AUTO PROGRAM)

You can register the TV channels automatically.

1 2

SET UP menuMENU AUTO PROGRAM

AUTO PROGRAM

22%

OK / : EDIT

(red) (green)

to search for the TV channel.

7 Searching stops when a channel is found and displayed.

If the reception is poor

If noisy sound is heard

Press the red or green button to fine tune the TV channel.

Press the 3 button to choose an appropriate sound system.

8 to exit. 3 to stop or when AUTO PROGRAM finishes. 4 The EDIT menu appears.

To edit the channel list Proceed to Step 2 of “To edit the channel list” on this

If a channel is not registered

To exit the menu Press the MENU button.

To register the TV channels manually (MANUAL in the EDIT menu)

You can register the TV channels into the TV’s channel list manually.

SET UP menuMENU EDIT/MANUAL

page. Proceed to Step 3 of “To register the TV channels

manually” on this page.

%$)4

02  #(## !6    #(   #(   #(   #(   #(   #(

-/6%  -%.5%8)4

).3%24

$%,%4%

-!.5!,

3 Choose the channel which you want to register. 4

the channel appears at the right of the CH/CC number.)

to activate the MANUAL function. (The sound system of

(blue)

5 to choose an appropriate sound system.

For details, see “SOUND SYSTEM”. \ Page 12

To edit the channel list (MOVE, DELETE and INSERT in the EDIT menu)

You can edit the TV channel list as you like.

After this operation, other channel’s PR number will be changed.

1 Repeat Steps 1 and 2 of “To register the TV channels manually

(MANUAL in the EDIT menu)”, \ see left.

2 Choose the channel which you want to change its PR number, or

delete, or register a new channel.

To change the

PR number (MOVE)

To delete the channel (DELETE)

To add the new channel (INSERT)

Press the 3 button. Then move it to the new PR number you want to use for the channel by pressing the 5/∞ button. Finally press the 2 button.

Press the yellow button.

If you add a new TV channel of NTSC-M system, press the SOUND SYSTEM button to change the sound system to M. Press the green button, then press the 3 button to choose “CC” or “CH”. Enter the CH/CC number for the channel you wish to add. The TV starts to search for the channel. When a TV channel has already been registered in PR99, using the INSERT function deletes that TV channel.

4 to exit.

FUNCTIONS

Page 16

TV channel presetting (continued)

CH/CC number

When you want to use the INSERT function on page 15, find the CH/CC number corresponding to the channel number of the TV channel from this table.

Channel No. Country

US United States, Philippines, etc..

CCIR Middle East, Southeast Asia, etc..

OIRT Eastern Europe, Russia, Vietnam,

AUSTRALIA Australia, etc..

Channel

CH US CCIR OIRT AUSTRALIA

CH 02 US-2 E2 R1 AU-0 C

30 H CH 04 US-4 E4 R2 AU-2 CH 05 US-5 E5 R6 AU-6 CH 06 US-6 E6 R7 AU-7 CH 07 US-7 E7 R8 AU-8 CH 08 US-8 E8 R9 AU-9 CH 09 US-9 E9 CH 10 US-10 E10 R10 AU-10 CH 11 US-11 E11 R11 AU-11 CH 12 US-12 E12 R12 CH 13 US-13 CH 14 US-14, W+29 CH 15 US-15, W+30 CH 16 US-16, W+31 CH 17 US-17, W+32 CH 18 US-18, W+33 CH 19 US-19, W+34 CH 20 US-20, W+35 CH 21 US-21, W+36 E21 CH 22 US-22, W+37 E22 CH 23 US-23, W+38 E23 CH 24 US-24, W+39 E24 CH 25 US-25, W+40 E25 CH 26 US-26, W+41 E26 CH 27 US-27, W+42 E27 C C C C C

etc..

3-S

U82 H U92 H

,03-S

U03 H

W U13 H U23 H

34+W ,82-S 44

+W ,92-S

54+

+W ,13-S

74+W ,23-S

-UA

82-UA82 92-UA92 03-UA03

23-UA/13-UA

3-U

CH US CCIR OIRT AUSTRALIA

HC C C C CH 38 US-38, W+53 E38 AU-39/AU-40 C C

HC C

HC CH 45 US-45, W+60 E45 AU-47/AU-48

HC CH 52 US-52, W+67 E52 AU-55/AU-56

HC C

CH 59 US-59, W+74 E59 AU-63/AU-64

HC CH 65 US-65, W+80 E65 CH 66 US-66, W+81 E66 CH 67 US-67, W+82 E67 CH 68 US-68, W+83 E68 CH 69 US-69, W+84 E69

CC US CCIR OIRT AUSTRALIA

CC CC 14 A S-14 CC 15 B S-15 CC 16 C S-16 CC 17 D S-17

,33-SU33 H

84+W

3-SU43

94+W

+W ,53-SU53 H

15+

W ,63-SU63 H

3-SU73 H

93 H 04 H

,14-SU

,44-SU

,64-SU

,94-SU

05 HC

,15-SU

,45-SU

,65-SU

06 HC

,16-SU16 HC ,26-

,46-SU

0 C

60 CC

63E

45+W ,93-SU

E55+W ,04-

65+W

E E

5+W ,24-

95+W

16+W

46+W

66+W

96+W

7+W

77+W

97+W

2-S20 CC 3-

4-S40 CC

S50 CC

-S70 CC

S80 CC

9-S90 CC

S01 CC

11-S11 CC 21-S 31-S31

43-UA33E 53-UA43 63-UA53E05

3-UA

7 83-UA73E25+W ,7

14-UA93 24-UA 34-UA14

4-U

54-UA34E85+W ,34-SU34 HC 64-UA44

94-UA64E 05-UA74E26+W ,74-SU74 HC 15-UA84E36+W ,84-SU84 HC 25-UA94 35-UA05E56+W ,0545-UA15E

75-UA35E86+W ,35-SU35 HC 85-UA45 95-UA55E07+W ,55-SU55 HC 06-UA65E1 16-UA75E27+W ,75-SU75 H 26-UA85E37+W ,85-SU85 HC

6-UA06E57+W ,06-

5 66-UA16E6 76-UA26 86-UA36E87+W ,36-SU36 HC 96-UA46

5-UA1-S10 CC

A5-UA6

CC US CCIR OIRT AUSTRALIA

CC 18 E S-18 CC 19 F S-19 CC 20 G S-20 CC 21 H S-21 CC 22 I S-22 CC 23 J S-23 CC 24 K S-24 CC 25 L S-25 CC 26 M S-26 CC 27 N S-27 CC 28 O S-28 CC 29 P S-29 CC 30 Q S-30 CC 31 R S-31 CC 32 S S-32 CC 33 T S-33 CC 34 U S-34 CC 35 V S-35 CC 36 W S-36 CC 37 W+1 S-37 CC 38 W+2 S-38 CC 39 W+3 S-39 CC 40 W+4 S-40 CC 41 W+5 S-41 CC 42 W+6 CC 43 W+7 CC 44 W+8 CC 45 W+9 CC 46 W+10 CC 47 W+11 CC 48 W+12 CC 49 W+13 CC 50 W+14 CC 51 W+15 CC 52 W+16 CC 53 W+17 CC 54 W+18 CC 55 W+19 CC 56 W+20 CC 57 W+21 CC 58 W+22 CC 59 W+23 CC 60 W+24 CC 61 W+25 CC 62 W+26 CC 63 W+27 CC 64 W+28

CC 95 A-5 CC 96 A-4 CC 97 A-3 CC 98 A-2 CC 99 A-1

X57 CC

3RY67 CC

5R1+Z87 CC

3-UA4RZ77 CC

4-UA2+Z97 CC

Page 17

Troubleshooting

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

Problem Cause / Solution Page

No picture, no sound • Deactivate the BLUE BACK function if it is

Snowy picture • Check the aerial cable and TV connections. 4 Stripes appear on the

picture

Double-pictures (ghosting) occur

Poor picture • Choose the appropriate colour system. Refer

White and bright still image look as if it was coloured

Top of the image from software products or video tape is distorted

Poor sound • Adjust the sound frequency properly. Refer to

Stereo or bilingual sound is unclear

Cannot operate the remote control

Cannot operate the menus

Cannot operate the front control buttons

turned on.

• Choose the appropriate sound system. Refer to “SOUND SYSTEM”.

• Interference caused by devices such as an amplifier, personal computer, or a hair drier. Move it away from your TV.

• Interference occurs caused by signal reflecting from mountains or building. Try to adjust the aerial’s direction or use another antenna.

to “COLOUR SYSTEM”.

• Adjust the COLOUR or BRIGHT setting. Refer to “PICTURE SETTING”.

• Inevitable phenomenon due to the nature of the picture tube. This is not a malfunction.

• Due to the condition of the video signal, the image was not properly recorded. This is not a malfunction.

“SOUND SYSTEM”.

• TV channel reception is poor. Change the stereo/bilingual mode to mono sound.

• The batteries may be exhausted. Replace with new batteries.

• Ensure that you are operating the remote control at less than seven meters from the front of your TV.

• Press TV/VIDEO button to return to TV mode and try operating the menus.

• Deactivate the CHILD LOCK function if it is turned on.

Problem Cause / Solution Page

Colour patches appear at the corner of the screen

–

Picture is tilted • This maybe due to the earth magnetism. Refer

Image takes a short period to be displayed

–

TV may emit crackling sound

–

Feel a slight electric shock when touching

the TV screen AUTO SIGNAL DETECT

does not work

–

Suddenly, the TV input

–

changes to VIDEO-2

AUTO SIGNAL DETECT does not work correctly

“PLEASE DISCONNECT VIDEO-1 CABLE!” appears on the screen.

–

• This maybe due to magnetized device such as a speaker placed near to your TV. Move it away from your TV. Alternatively, you can also use the magnetic shielded speaker.

to “PICTURE TILT” to correct the tilt.

• Image required time to stabilize before display. This is not a malfunction.

• This is due to a sudden change in temperature and it is not a malfunction. If the crackling sound is too frequent, request your service technician for inspection.

• This is due to the static electricity of the picture tube and it will not harm the human body. This is not a malfunction.

• Set the AUTO SIGNAL DETECT function to ON.

• Turn the VCR or DVD Player off and on again.

• Check that the video cable connection on VIDEO-2 is properly connected.

• Check whether the AUTO SIGNAL DETECT function is on or off.

• AUTO SIGNAL DETECT function may work when you operate the VCR or DVD player even if you do not make it to playback.

• Check the video cable connection.

• Some VCR or DVD player may output the video signal discontinuously. If this happens, AUTO SIGNAL DETECT function cannot work correctly.

• Please disconnect either S-VIDEO cable or video input cable from video-1 input.

–

– –

–

– –

–

REFERENCE

Page 18

Specifications

TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)

Receives cable channels in mid band, super band and hyper band.

Power requirements AC 110 to 240 V, 50 Hz / 60 Hz External input / output

VIDEO-1 S-video input, VIDEO input, AUDIO L/R input

VIDEO-2/COMPONENT VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/C

VIDEO-3 VIDEO input, AUDIO L/R input

OUTPUT VIDEO output, AUDIO L/R output

Headphone jack Stereo mini jack (3.5 mm diameter)



Sound-multiplex systems A2 (B/G) or NICAM (B/G, I, D/K)



Teletext system FLOF (Fastext), WST (World Standard Text)



Language displayed by teletext Refer to the table in the description “TEXT LANGUAGE” (\ page 11).



Depending on the models, STEREO/I†II function for the Sound-multiplex systems or Teletext function may not be available.

Design and specifications subject to change without notice.

B/CR

) input

Page 19

Memo

REFERENCE

Page 20

JVC AV-29QS27, AV-29QX17, AV-29QX17B, AV-29RS28, AV-29RX18 User Manual

WARNING

CAUTION

Contents

Connections

Initial settings

Remote control buttons and basic functions

TV buttons and functions

Operating the menus

Picture setting

Picture in picture (PIP) operation

Teletext operation Sound setting

Customized setting

TV channel presetting

Troubleshooting

Specifications