JVC AV-29ED5BN, AV-29ED5SN User Guide

AV-29ED5BN AV-29ED5SN

DEUTSCH

ENGLISH

FARBFERNSEHGERÄT BEDIENUNGSANLEITUNG

COLOUR TELEVISION

INSTRUCTIONS

	50066129
©2005 Victor Company of Japan, Limited	0205TKH-VT-VT

Contents					Safety Precautions
Safety Precautions .................................................		17			1. Power Source
Remote Control Buttons ........................................		18			The receiver should be operated only from a 220-240V AC,
Control Panel Buttons		19			50 Hz. outlet. Ensure you select the correct voltage setting
					for your convenience.
Antenna Connections .............................................		19			2. Power Cord
Preparation ..............................................................		20			The power supply cord should be placed so that they are not
Features		20			likely to be walked on or pinched by items placed upon them
					or against them. Pay particular attention to cord where they
Before Switching on your TV		20
					enter the plug, power outlet, and the point where they exit
Power connection		20			from the receiver.
Aerial Connections ..........................................................		20			3. Moisture and Water
How to connect the external equipments		20
					Do not use this equipment in a humid and damp place (avoid
Inserting batteries in the remote control handset		20
					the bathroom, the sink in the kitchen, and near the washing
Switching the TV ON/OFF		20
					machine). Do not expose this equipment to rain or water and
To switch the TV on.........................................................		20			do not place objects filled with liquids on it as this may be
To switch the TV off .........................................................		20			dangerous.
Initial Settings .........................................................		20			4. Cleaning
T-V LINK .........................................................................		21			Before cleaning, unplug the receiver from the main supply
Operating with the onset buttons .....................................		22			outlet. Do not use liquid or aerosol cleaners. Use with soft
Operating with Remote Control ........................................		22			and dry cloth.
Menu System ...........................................................		22			5. Ventilation
..................................................................Picture Menu		22			The slots and openings on the receiver are intended for venti-
Sound Menu....................................................................		23			lation and to ensure reliable operation. To prevent overheating,
Install (Installation) Menu.................................................		24			these openings must not be blocked or covered in anyway.
Using the Decoder (EXT-2) function .................................		26			6. Lightning
Feature Menu ..................................................................		27
					In case of storm and lightning or when going on holiday, dis-
Other Features		28
					connect the power cord from the wall outlet.
Sound Mute ....................................................................		28			7. Replacement Part
Stereo / Bilingual .............................................................		28
					When replacement parts are required, be sure the service
Information on Screen .....................................................		28
To Display the Time.........................................................		28			technician has used replacement parts which are specified
Picture ............................................................................		28			by the manufacturer or have the same specifications as the
VCR / DVD Control Buttons and VCR /	/ DVD Switch 28				original one. Unauthorized substitutions may result in fire,
					electrical shock, or other hazards.
Teletext ....................................................................		28
To operate Teletext ..........................................................		28			8. Servicing
					Please refer all servicing to qualified personnel. Do not re-
To select a page of Teletext .............................................		28
To Select Index Page ......................................................		29			move cover as this may result in electric shock.
Searching for a teletext page while watching TV		..............29			9. Flame sources
To Select Double Height Text		29
					Do not place naked flame sources on the apparatus.
To Reveal “concealed” Information		29
					10. Stand-By
To Stop Automatic Page Change .....................................		29
..............................................To Select a Subcode Page		29			Do not leave your TV stand-by or operating condition when you
To exit Teletext ................................................................		29			leave your house.
Fastext and Toptext ........................................................		29			Warning!
Connect the External Equipments		30
					Any intervention contrary to regulations, in particular, any
Via the Euroconnector.....................................................		30			modification of high voltage or a replacement of the picture
T-V LINK compatible VCR ...............................................		30			tube may lead to an increased concentration of x-rays. Any
RGB mode ......................................................................		30			television modified in this way no longer complies with license
EXT-2 S Mode .................................................................		30			and must not be operated.
Via the RCA jacks ...........................................................		30			Instructions for waste disposal:
Via the ANT (aerial) socket ..............................................		30			Packaging and packaging aids are recyclable and should
TV and Video Recoder (VCR)		30
					principally be recycled. Packaging materials, such as foil
NTSC Playback		30
					bag, must be kept away from children.
Copy Facility		30
					Batteries, including those which are heavy metal-free, should
Connecting Headphones		30
					not be disposed of with household waste. Please dispose of
Tips		32
					used batteries in an environmentally sound manner. Find out
Specifications..........................................................		32			about the legal regulations which apply in your area.

ENGLISH - 17 -

			Remote Control Buttons
		= Stand By / Power
	0 - 9 = Direct Program
	Yellow Button / Factory Settings in Picture Menu
	Blue Button
	PICTURE = Picture Mode Change
	(	) = Programme Up (Cursor Up)
	MENU = Menu Button
	( ) = Cursor Right / Volume +
	(	) = Programme Down (Cursor Down)
	Teletext / VCR /DVD Control Buttons
		= VCR /	/ DVD Switch
		= Stereo / Bilingual Button
		= Information Button / T-V Link in Program Menu
	(	) = Cursor Left / Volume -
	AV = AV Button
	= Teletext Button
£ Ç ZOOM = Zoom (Picture Size) Change / Red Button
£ n		= Hyper Sound / Green Button
£ ™	= Mute

CAUTION

RISK OF ELECTRIC SHOCK

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

ENGLISH - 18 -

Control Panel Buttons

Antenna Connections

ENGLISH - 19 -

Preparation	• Replace the battery cover.
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. To prevent any fault and unsafe situations, please do
not place any objects on top of the set.
“Use this apparatus in tropical and moderate climates.”

Features

• It is a remote controlled colour television.

	• 200 programmes from VHF, UHF bands or cable channels
	can be preset.		NOTE: Remove batteries from remote control handset when it is
	• It can tune cable channels.
			not to be used for a long period. Otherwise it can be damaged
	• Controlling the TV is very easy by its menu driven system.
			due to any leakage of batteries.
	• It has two Euroconnector sockets for external devices (such
			Switching the TV ON/OFF
	as video recorder, video games, audio set, etc.)
	• Front AV (EXT-3) Input available.		You can operate your TV either using the remote control
	• Stereo sound systems (German+Nicam) are available.		handset or directly using the TV onset buttons.
	• 3D Sound (3-Dimensional Sound).		To switch the TV on
	• Full function Teletext (Fastext, Toptext).
			Your TV will switch on in two steps:
	• It is possible to connect headphone.
			1- Press the power button located on the front of the TV. Then
	• Direct channel access.
			the TV switches itself to standby mode and the RED LED
	• A.P.S. (Automatic Programming System).		located below the TV turns on.
	• All programmes can be named.		2- To switch on the TV from stand-by mode either:
	• Forward or backward automatic tuning.		Press a digit button on the remote control so that a program-
	• Sleep timer.		me number is selected,
			or,
	• Child Lock.
			Press Standby / Power Button or Programme Up and Down
	• Blue Background.
			buttons on the TV or on the remote control respectively, so
	• Comb Filter : Digital circuitry to make adjustments providing
			the TV will switch on and the RED Led will turn GREEN.
	outstanding picture quality with sharp, crisp edges, while vir-		IMPORTANT:
	tually eliminating dot crawl.
	• CTI : (Colour Transient Improvement) Improvement of hori-		• If no aerial signal is received at the selected program for a
	zontal transitions of chrominance (colour) signals.		period of 5 minutes then your TV automatically switches
	• T-V Link.		into stand-by mode.
	• Automatic sound mute when no transmission.		To switch the TV off
	• When no valid signal is detected, after 5 minutes the TV		• Press the stand-by button on the remote control, so the TV
	switches itself automatically to stand-by mode.
			will switch to stand-by mode and the GREEN LED will be-
	• WSS (Wide Screen Signaling).
			come RED, or,
	• NTSC Playback.		• Press the power button located on the front of the TV.
			NOTE: If you have switched of the TV set from the power but-
	Before Switching on your TV
			ton instead of the remote control, next time you press the
	Power connection		power button, the TV set will switch on without going to the
	Important: The TV set is designed to operate on 220-240 V		stand-by mode.
	AC, 50 Hz.
			Initial Settings
	• After unpacking, allow the TV set to reach the ambient room
			When the TV is first turned on. It enters the initial setting
	temperature before you connect the set to the mains.
			mode, and the AUTOSTORE menu is displayed. Follow the
	Aerial Connections
			instructions below to do the initial settings.
	• Connect the aerial plug to the aerial input socket located at
	the back of the TV.
	How to connect the external equipments
	See “Connect the External Equipments” on page 31.					/$1*8$*(
	• See the instruction manuals provided with the external de-					&28175<
	vices too.
	Inserting batteries in the remote control handset					&RQWLQXH
	• Remove the battery cover located on the back of the hand-
	set by gently pulling upwards from the indicated part.
	• Insert two AAA (R03) or equivalent type batteries inside.
	ENGLISH - 20 -

•The AUTOSTORE menu does not appear when your TV has been turned on once. In this case, use the “LANGUAGE”, “COUNTRY” and “AUTOSTORE” items in the INSTALL menu to make the initial settings. For details, see “Install (Installation) Menu” on page 24.

•If you want to do the initial settings later, press PICTURE button to turn the menu off.

1. Press "" or "" button to select "LANGUAGE" item. Then press the “” or “” button to enter the "LANGUAGE" sub-menu.

2.Press "" or "" button to select a language. Then press the “” or “” button to store it.

3.Press the MENU button to return to the AUTOSTORE menu.

4.Press "" or "" button to select "COUNTRY" item. Then press the “” or “” button to enter the "COUNTRY" sub-menu.

5.Press "" or "" button to select the country where you are now located. Then press the “” or “” button to store it.

6.Press the MENU button to return to the AUTOSTORE menu.

7.Press “” or “” button to select “Continue” item.

Then press “” button to start the AUTOSTORE function. The AUTOSTORE function automatically stores the received channels in your TV's programme numbers.

$36 ,6 5811,1* 3/($6( :$,7

$36 ,6 5811,1* 3/($6( :$,7

APS: Automatic Programming System

After the AUTOSTORE is finalized, “PROGRAM” menu appears. You can delete a channel or change a programme number. For details, see “Program Menu” on page 26.

352*5$0

FKDQJH

GHOHWH

L7 9 /LQN

8.If you do not have a T-V LINK compatible VCR, press “PICTURE” button to exit the menu.

If you have a T-V LINK compatible VCR connected to the

EXT.2 terminal, press “” button to display “T-V LINK”

menu. Then follow the operating procedure “Downloading data to VCR” in the following “T-V LINK” section.

If a channel you want to view is not stored, store it using the TUNING menu. For details, see “Tuning Menu” on page 24.

T-V LINK

When a T-V LINK compatible VCR is connected to the EXT.2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

To use T-V LINK functions:

A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier. For details, see your VCR instruction manual.

“Q-LINK” (a trademark of Panasonic Corporation) “Data Logic” (a trademark of Metz Corporation) “Easy Link” (a trademark of Phillips Corporation) “Megalogic” (a trademark of Grundig Corporation) “SMARTLINK” (a trademark of Sony Corporation)

Downloading data to VCR:

The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the programme channels on your VCR manually.

The “T-V LINK” menu will be displayed when you press the

“” button while “PROGRAM” menu is displayed, or when-

ever the “INSTALL” menu operations are performed.

Press “” button to start downloading data to VCR.

ENGLISH - 21 -