JVC AV 24F702 User Manual

COLOR TELEVISION USER'S GUIDE

For model:

AV-24F702

CATV

VCR

DVD

POWER

STANDARD

INPUT

BBE

DISPLAY

RETURN

SLEEP TIMER

C.C.

AUDIO SELECT

LIGHT

RM-C309G

ENTER

MUTING

VOL VOL

EXITMENU

– VCR CHANNEL

VCR/DVD

TV/VCR

PREV NEXT

POWER

PLAY

STOPREC

OPEN/CLOSE STILL/PAUSE

FFREW

PAUSE

POWER

IMPORTANT NOTE TO THE CUSTOMER:

In the space below, enter the serial number for your

television (located on the rear of the television cabinet).

Staple your sales receipt or invoice to the inside cover of this guide.

Keep this user's guide in a convenient place for future reference.

Keep the carton and original packaging for future use.

Serial Number

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules

could void the user's authority to operate this equipment.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE:

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installations such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contacts your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

13. LIGHTNING

To protect your unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c . If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by

the operating instructions, as an improper adjustment of other controls may result in damage and will often require

extensive work by a qualified technician to restore the unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f . When the unit exhibits a distinct change in performance, this indicates a need for service.

20. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

23. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC

ELECTRIC SERVICE EQUIPMENT

NEC-NATIONAL ELECTRICAL CODE

S2898A

SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION

810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

FEATURES

• Flat Picture Tube - It reduces the influence of surrounding light resulting in outstanding image detail and clarity.

• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are available in

your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in your area or your cable system.

• On-Screen 3 Language Display - Consists of channel, sleep timer, volume level, muting, text/caption indicators and picture control adjustments. These can be displayed in English, Spanish or French.

• ON/OFF Timer - Allows you to automatically turn on or off your TV at a set time.

• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off automatically.

• V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this

information. The V-Chip will allow you to set a restriction level (US only).

• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, COLOR, CONTRAST, SHARPNESS, TINT and COMPONENT.

• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.

• Stereo/SAP Reception - This TV is designed to receive stereo and separate audio program (SAP) broadcasts where available.

• BBE- BBE gives you the vivid sound with so much presence.

• Video Input Jacks - This unit is equipped 3 types of video input jacks. The component video in jacks and S-video in jack enable

you to watch the DVD player or the video devices with high quality picture.

• Remote Control - You can operate your VCR, Cable Box, Satellite Dish and DVD after you have registered the 3-digit codes for their brand name.

LOCATION OF CONTROLS

BACKFRONT

POWER

ON TIMER

CHANNEL VOLUME

VIDEO 3 IN

VIDEO L/MONO

AUDIO R

1524 673

1. POWER Button - Press to turn the TV on or off.

2. Remote Sensor - Signals from the Remote Control unit

are received here.

3. ON TIMER Indicator - This indicator lights up when the

powered up. It also lights up when ON TIMER program is turned ON while power is OFF.

4. CHANNEL +/– Buttons - Press to select a higher or

lower numbered channel set into memory.

5. VOLUME +/– Buttons - Press to raise or lower the

volume of the sound.

6. VIDEO 3 IN Jacks (Front) - Audio and video signal

cables from an external source can be connected here.

7. HEADPHONES JACK - Plug an earphone or headphones

with an 1/8 miniplug into this jack for listening.

8. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF antenna

or CATV cable to this jack.

OUTIN

ANT(75Ω)

S-VIDEO

VIDEO

L/MONO

AUDIO

VIDEO

L/MONO

AUDIO

VIDEO 2VIDEO 1

810 12119

HOW TO OPEN THE FRONT DOOR

9. VIDEO 1 IN Jacks (Rear) - Audio and video signal

cables from an external source (ex. VCR) can be connected here. If your video device has S-video out jack, connect to S-video in jack.

10. VIDEO 2 IN Jacks - Audio and video signal cables from an external source (ex. DVD) can be connected here. If you have a DVD with component video out jacks, connect to the component video in jacks. If you have a video device without the component video out, connect to video in jack.

11. REAR AUDIO (L / R) /VIDEO OUT Jacks - Used to output audio and video signals to a TV, amplifier or VCR. NOTE: This video out jack does not output the signal from component video in jacks.

12. AC Power Cord - Connect to a 120V, 60Hz outlet.

REMOTE CONTROL

VCR

DVD

CATV

POWER

STANDARD

3 4

5 6

BBE

DISPLAY

SLEEP TIMER

RM-C309G

123 456 789

C.C.

AUDIO SELECT

INPUT

RETURN

LIGHT

12 13

15 16

MUTING

VOL

VCR CHANNEL

PREV NEXT

REC

OPEN/CLOSE

1. TV/CATV Switch - Used to select the TV or Cable Box to be operated. (You can operate your cable box after you have programed the remote control.)

2. VCR/DVD switch - Used to select the VCR or DVD to be operated. (You can operate your VCR or DVD after you have programed the remote control.)

3. BBE Button - Press to turn BBE On or Off.

4. DISPLAY Button - Displays the current status time,

channel (or Input), the present settings on the TV screen.

5. SLEEP TIMER Button - Sets the TV to turn off automatically after up to 120 minutes.

6. C.C. (Closed Caption) Button - Switches between Caption, Text and TV modes for Closed-Captioned programs.

7. MUTING Button - Press to turn off the sound. Press again to turn the sound back on.

8. CH +/– Buttons - Press the + button to change to a higher numbered channel set into memory. Press the – button to change to a lower numbered channel set into memory. Press to select the desired item during OnScreen operations.

9. MENU Button - Press to display the On-Screen menu function.

VCR /DVD

PLAY FFREW

STOP

VOL

POWER

PAUSE

STILL/PAUSE

ENTER

EXIT

TV/VCR

17 18

19 20

10. VCR or DVD Operation Buttons - Press to operate your VCR or DVD.

11. POWER Button - Press to turn the TV on or off.

12. STANDARD Button - Press to reset the On-Screen

picture adjustments or Audio adjustment to their factory preset positions.

13. INPUT Button - Switches between the TV and external input sources.

14. 10-key pad - Allows direct access to any channel of the TV, VCR or Cable box.

15. RETURN Button - Switches between the present channel and the last channel selected.

16. LIGHT Button - Press to turn the illumination on for CH +/– and VOL +/– buttons.

17. AUDIO SELECT Button - Switches sound between mono and stereo, and SAP when receiving broadcasts in stereo or SAP.

18. ENTER Button - Press to enter selected setup.

19. VOL +/– Buttons - Press the + button to increase, or

the – button to decrease the volume level. Press to select the desired setting or arrangement during OnScreen operations.

20. EXIT Button - Press to exit the On-Screen menu function.

REMOTE CONTROL (CONTINUED)

BATTERY INSTALLATION

1. Slide the battery compartment cover in the direction of the arrow.

2. Install two “AA” (penlight size) batteries, paying attention to the polarity diagram in the battery compartment.

BATTERY PRECAUTIONS

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

6.When you change the batteries, try to complete the task within three minutes. If you take longer than three minutes, the remote control codes for your Cable Box may have to be reset (see page 8).

3. Replace the compartment cover.

EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

15 FEET

30˚ 30˚

NOTES: • When there is an obstacle between the TV and the transmitter, the transmitter may not operate.

• When direct sunlight, an incandescent lamp, ﬂuorescent lamp or any other strong light shines on the

Remote sensor of the TV, the remote operation may be unstable.

VCR

CATV

BBE

DISPLAY

SLEEP TIMER

DVD

POWER

STANDARD

INPUT

123 456 789

RETURN

C.C.

AUDIO SELECT

LIGHT

REMOTE CONTROL BASICS

• Before you can operate the remote control, you must first install

the batteries (included). See “Changing the Batteries” on this page above for instructions. (For an illustration, please see page 6.)

• Press the POWER button to turn the television on or off.

• Make sure the TV/CATV switch is set to TV. Move the switch to

CATV only if you need to operate a cable box.

• Slide the VCR/DVD selector switch to VCR to control a VCR, slide to DVD to control a DVD player. Please see pages 8 to 10 for instructions on programming your remote control to operate a Cable box, VCR or DVD player.

• Press the CH + and CH – buttons to scan through the channels. Tap the CH + or CH – button to move through the channels one channel at a time.

• Press VOL + or VOL – to raise or lower the volume. An indicator bar will appear onscreen to show you the television volume level.

• The CH +/– and VOL +/– buttons are also used to navigate JVC’s onscreen menu system.

• You can directly access specific channels using the 10-key pad.

• This remote includes illuminated buttons for key features like CH +/–

buttons, and VOL +/– buttons. Press the LIGHT button to turn

the

illumination on.

RM-C309G

MUTING

VOL

VCR CHANNEL

PREV NEXT

REC

OPEN/CLOSE

VCR /DVD

POWER

PLAY FFREW

STOP

ENTER

VOL

EXIT

TV/VCR

PAUSE

STILL/PAUSE

CHANGING THE BATTERIES

Push down on the remote’s back cover and slide towards the bottom to remove it. Insert two AA batteries (supplied), carefully noting the “+” and “–” markings on the batteries and on the remote control. To avoid a potential short circuit, insert the “–” end first. Be sure to use only size AA batteries. When batteries are installed, slide the cover back into place (until it clicks into position).

• If the remote control acts erratically, replace the batteries. Typical

battery life is six months to one year. We recommend using alkaline batteries for longer battery life.

When you change the batteries, try to complete the task within three minutes. If you take longer than three minutes, the remote control codes for

be reset (pages 8-10).

your VCR, DVD, and/or Cable Box may have to

REMOTE CONTROL (CONTINUED)

REMOTE PROGRAMMING

Setting the CATV, VCR and DVD Codes

You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.

Cable Box or Satellite setup

The remote control is programmed with CATV and/or Satellite codes for power on, power off, channel up, channel down, and 10 key operation.

1) Find the CATV/Satellite brand from the list of codes shown below.

2) Slide the 2-way selector switch to “CATV ”.

3) Press and hold down the DISPLAY button.

4) With the DISPLAY button held down, enter the first code number listed using the 10 key pad.

5) Release the DISPLAY button.

6) Confirm the operation of the Cable Box/Satellite receiver.

• If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not respond to any code, try the Search Codes Function as shown below.

Cable Box CODES Cable Box CODES

ABC Archer Cableview Citizen Curtis Diamond Eagle Eastern GC Brand Gemini

General Instrument

Hamlin Hitachi Jerrold Macom Magnavox Memorex Movietime Oak Panasonic Paragon Philips Pioneer

032, 025 051, 032 022, 051 058, 059 024, 032, 025 029 034 032, 051 022, 043 065, 024, 025, 026, 027, 020, 021, 022, 057, 023 040, 041, 042, 045, 058, 064 049, 024 065, 024, 025, 026, 027, 020,021, 022, 057, 023 049, 050, 051, 054 033 030 032, 051 039, 037, 048 055, 056, 060, 071 063 028, 029, 030, 052, 053, 031, 069 047, 062

Pulsar024 Puser RCA Realistic Regal Regency Rembrandt Samsung Scientific Atlanta SLMark Sprucer Stargate Telecaption Teleview Texscan Tocom Toshiba Unika Universal Videoway Viewstar Zenith 063, 046 Zenith/Drake Satellite

051, 032 032 061, 070 032 058, 064, 040, 041, 042, 045, 068 034 037, 032, 051, 038 051 057, 058, 059 051, 047 051, 056 032, 051 067 047, 051 044 035, 036, 066 050 032, 025 022, 032 052 029, 030

046

Digital Satellite Systems

Echostar Express VU G.E. G.I. Gradiente Hitachi HNS (Hughes) Pranasonic

CODES

100, 113, 114 100, 113 106 108 112 104, 111 104 105

Digital Satellite Systems

Philips Primestar Proscan RCA Sony Star Choice Toshiba Uniden

CODES

102, 103 108 106, 109, 110 106, 109, 110 107 104, 108 101 102, 103

Cable/Satellite Search Codes Function:

1) Slide the 2-Way Mode Selector switch to CATV.

2) Press the TV POWER and RETURN buttons. Hold for at least three seconds and release.

3) Press TV POWER, see if the CATV or Satellite box responds.

If there was a response, press RETURN. The operating codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use the remote control which came with the equipment.

5) Press RETURN to exit.

+ 16 hidden pages