How it Works
JVC
Loading...
AV-21MS30
User Manual
24 pgs404.88 Kb0
Schematic
51 pgs2.38 Mb0
Table of contents
Loading...

JVC AV-21MS30 User Manual

COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT

Contents

AV-21MS30
Knowing your TV’s features ....................................................... 3
Remote control buttons and basic functions .............................. 4
TV buttons and functions ........................................................... 6
Setting up your TV ..................................................................... 7
Basic setting for picture .............................................................. 9
Advanced setting for picture ..................................................... 11
Original features for picture ...................................................... 12
Basic setting for sound ............................................................. 13
DVD function ............................................................................ 15
Customized setting .................................................................. 16
Troubleshooting ....................................................................... 22
Specifications ........................................................................... 23
INSTRUCTIONS
GGT0097-001A-H
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE
1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the
TV, grasp the mains plug. Do not pull on the power cord.
3 Never block or cover the ventilation openings.
Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV of
more than the minimum distances as shown.
4 Do not allow objects or liquid into the cabinet openings. 5 In the event of a fault, unplug the unit and call a service technician. Do
not attempt to repair it yourself or remove the rear cover.
6 The surface of the TV screen is easily damaged. Be very careful with it
when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FOLLOWING RULES REGARDING THE USE OF THIS TV.
15 cm
10 cm 10 cm
15 cm
7 If you are not going to use this TV for a long period of time, be sure to
disconnect the AC plug from the AC socket.
8 The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the apparatus.
WARNING: <AV-21M Series>
YOU CAN DETACH THE PROTECT SHEET ON THE TOP AND BOTTOM OF FRONT FRAME IF YOU NEEDED. THE FRONT BUTTON DOOR OF THE TV SHOULD BE PULLED OUT FROM ITS BOTTOM. DO NOT PRESS THE UPPER PART, OR YOUR FINGER MAY BE PINCHED.
✘✓
PULL PULL
2

Knowing your TV’s features

Main features
DVD FUNCTION Just connect DVD player to the television. The television will detect DVD signal and display
EXIT
A2/NICAM You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 (STEREO / I■II) or NICAM Sound-multiplex system.
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
AI ECO TV detects the brightness of your room and automatically adjust the picture brightness to a
AI VOLUME TV adjusts the volume automatically to the same level for all TV channels to avoid sudden
TELETEXT You can view teletext programmes which are broadcasted by some TV channels. Teletext
WHITE BALANCE You can choose one of three tones of white to match to the video source such as movie,
picture on the screen automatically and you can adjust pictures and sound while you are watching DVD as your desire.
suitable level for a better eye care.
change of the volume when selecting different TV channel or selecting Video Mode.
programme is an information in text form.
sport, etc. Changing White balance affects the appearance of all other colours on the screen.
RM-C1286
Confirm your TV’s functions
AV-21MS30 doesn't have PICTURE BOOSTER function and SUPER BASS function. So when you press a button concerned to a function that is not available for your TV, it does not work and the logo “Ø” appears on the screen.
3

Remote control buttons and basic functions

No. Press To
POWER Turn on or off the TV from standby mode.
1
MENU/OK Display menu and confirm selected function.
2
5 / ∞ / 2 / 3 Select and adjust menu function.
3
CHANNEL -/+ Select the desired channel number.
4
VOLUME -/+ Adjust the volume level.
5
TV/VIDEO Select TV or video terminal input.
6
EXIT On the other hand, you can use this button to EXIT from the menu. MUTING Turn off the volume.
7
DISPLAY Display the programme number or video terminal number, stereo/bilingual broadcast system
8
/BACK and PR list (channel list) on the screen.
0~9, -/-- Select the programme number. For two digits programme number, press -/--, then press the
9
RETURN
!
FAVORITE Register and recall 4 favorite channels.
"
CHANNEL 1. Choose the TV channel you want to register then press and hold a colour button until (colour buttons: red, green, yellow, blue)
Press this button again to resume the volume.
You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list. 2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are indicated with coloured mark.
On the other hand, you can use this button to return to the previous menu.
number button.
+
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register. 2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
"FAVORITE CHANNEL ■ PROGRAMMED!" appears.
2. To register other favorite channels, repeat step 1. To recall the favorite channel, press the colour button. When the TV is in Text function or menu mode, the favorite channel function is not available.
1
"
8
2
! 4
RM-C1286
6
EXIT
3
7
9
5
4
Remote control buttons and basic functions (continued)
How to operate menus and menus locations
To
Display the MENU
Display the top menu
Display the 2nd menu
Display the 3rd menu
Return to the previous menu
Choose the setting of a function
Adjust the effect level of a function
Display the sub menu of a function.
Press the MENU/OK button 2.
Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2.
Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2.
Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2.
Press the DISPLAY/BACK button
8. Press 5/∞ buttons 3 to choose
a function. Then press the 2/3 buttons 3 to change the setting.
Press 5/∞ buttons 3 to choose a function. Then press the 2/3 buttons 3 to adjust the effect level.
Press the 5/∞ buttons 3 to choose a function. Then press MENU/OK button 2 to display the sub menu.
The following chart shows locations of functions in menus. In this manual, location of a function is described as follows:
MENU Top menu
MENU 2nd menu
Top menu
Note: Some functions have the 4th menus as the sub-menus.
Operation
2nd menu
Note
To exit the MENU, press the DISPLAY/ BACK button 8 or choose EXIT menu or TV/VIDEO/EXIT button 6.
Press ∞ button 3 to display the next page for more functions.
–
Press the TV/VIDEO/ EXIT button 6 to exit from the menu.
–
3rd menu
Top menu 2nd menu Location 3rd menu Location
MENU PICTURE PICTURE MODE P.9 – –
SOUND STEREO/
FEATURES DVD MENU P.15
INSTALL SETUP TOUR P.17 – –
EXIT – – – –
PICTURE SETTING P.10 CONTRAST P.10
WHITE BALANCE P.10 – – VNR P.16 – –
I■II
AI VOLUME P.14 – – SOUND MODE P.13 – – EQUALIZER P.14 – – BALANCE P.13 – – CINEMA SURROUND
OFF TIMER P.16 – – CHILD LOCK P.16 – – COMPRESS (16:9) AI ECO SENSOR P.11 – –
AUTO PROGRAM P.18 – – EDIT/MANUAL P.18 DELETE, MOVE, P.18-
COLOUR SYSTEM P.9 – – LANGUAGE P.16 LANGUAGE P.16 TEXT LANGUAGE P.12 TEXT LANGUAGE P.12 VIDEO-2 SETTING P.17 – – BLUE BACK P.11 – –
BRIGHT P.10 SHARP P.10 COLOUR P.10 TINT P.10
P.14 – –
P.14 – –
AUTO SIGNAL DETECT DVD PICTURE MODE TINT COLOUR WHITE BALANCE SOUND MODE CINEMA SURROUND
P.11 – –
MANUAL, INSERT P.19
P.15 P.15 P.15 P.15 P.15 P.15
5

TV buttons and functions

Front of the TV
AV-21MS30
9
8
R
V
L / MO
N
O
IN
(V
ID
E
O
-3
)
Rear of the TV
AV-21MS30
COMPONENT
VIDEO-1
(VIDEO-2)
INPUT
S
OVER
V
L
/
MONO
R
$
OUTPUT
INPUT
V
Y
/ V
LRRL
B
C
/
MONO
C
R
" !
#
76
CHANNEL
MENU
OK
5
VOLUME
243 1
POWER
No. Button/terminal Description Page
1 L (main power) Press to turn on or turn off the TV’s main power. – 2 POWER lamp Indicate the TV is being turned on or off. –
No colour : TV’s main power is being turned off. Red : TV’s main power is being turned on. Note: When you turn off the power switch while TV is in standby mode, the light of power lamp will be off in 10 -15 seconds.
3 ECO sensor – 4 Remote control sensor – 5 VOLUME -/+ Press to adjust the volume level. – 6 CHANNEL -/+ Press to select the desired channel. – 7 MENU Press to display the menu. – 8 IN (VIDEO-3) Video and audio input jacks for VIDEO-3 mode. 21 9 Headphone jack. 21 ! Aerial socket. 7 " OUTPUT Video and audio output jacks. (The component video 21
signal cannot be output.)
# COMPONENT Video or component video, and audio input jacks for 21
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting
the “VIDEO-2 SETTING” function (see page 17).
$ VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1 7
mode
How to operate the menus with the TV button
TV button
Work as same as the button on the remote control unit
Note
MENU MENU/OK button To display main menu and exit
menu after finish setting. CHANNEL -/+ ∞/5 button To select menu function. VOLUME -/+ 2/3 button To adjust the desired function.
6

Setting up your TV

CAUTION
• Turn off the equipment including the TV before connecting.
1 Connecting the aerial cable.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable (or S-VIDEO cable if available) and audio cables. For details, see the manual of your VCR.
Rear of TV
To video output
To S-video output
VCR
To audio output
To aerial input
AV-21MS30
To R F output
VHF/UHF outdoor aerial
COMPONENT
VIDEO-1
(VIDEO-2)
OUTPUT
INPUT
INPUT
S
OVER
V
Y
V
/
V
LRRL
L
C
B
/
/
MONO
MONO
C
R
R
2 Connecting the compatible main plug to the AC outlet.
3 Inserting batteries into the remote control.
Insert two batteries by following the + and ­polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries. Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new
batteries. The supplied batteries are for testing, not regular use.
4 Turn on the TV by pressing the main power button.
JVC logo appears on the screen.
JVC logo will appear on the screen again at the phase of “SETUP TOUR RESTART?” function. Then the initial setting can be performed according to page 8.
7
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below:
LANGUAGE
ENGLISH
PУCCKИЙ
MELAYU INDONESIA
MENU : OK DISPLAY : BACK TV/VIDEO : EXIT
TEXT LANGUAGE
GROUP-1
GROUP-2
GROUP-3
MENU : OK DISPLAY : BACK TV/VIDEO : EXIT
AUTO PROGRAM
22%
MENU : OK
CC 12
EDIT
PR CH/CC AV
■
1 CH 04
■
2 CH 76
■
3 CH 78
■
4 CH 05 5 CH 28 6 CH 10
MENU : OK
MOVE
3
■
INSERT
■
DELETE
■
MANUAL
AUTO PROGRAM
SETUP TOUR RESTART?
■
: YES
MENU : NO
• Press 5/∞ button to select your desired language.
8
• Press 5/∞ button to select your desired Teletext language group. For details, see page 12.
• TV will start searching for the channels.
To stop AUTO PROGRAM, press MENU/OK button.
• To complete the initial setting, press the MENU/OK button. To edit the channel list, see page 20.
• After that, when turn on the TV at the next time. “SETUP TOUR RESTART?” will be displayed. Press the MENU/OK button to cancel the SETUP TOUR RESTART function. If you want to make initial settings again when the next time you turn on the TV, press the Red button to activate the SETUP TOUR RESTART function.
Loading...
+ 16 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use