Specifications .............................................................. Back cover
INSTRUCTIONS
GGT0067-001B-H
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE
1 Operate only from the power source indicated on the rear of the TV.
2 Avoid damaging the power cord and mains plug. When unplugging the
TV, grasp the mains plug. Do not pull on the power cord.
3 Never block or cover the ventilation openings.
Never install the TV where good ventilation is unattainable.
When installing this TV, leave spaces for ventilation around the TV of
more than the minimum distances as shown.
4 Do not allow objects or liquid into the cabinet openings.
5 In the event of a fault, unplug the unit and call a service technician. Do
not attempt to repair it yourself or remove the rear cover.
6 The surface of the TV screen is easily damaged. Be very careful with it
when handling the TV. Should the TV screen become soiled, wipe it
with a soft dry cloth. Never rub it forcefully. Never use any cleaner or
detergent on it.
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FOLLOWING RULES REGARDING THE USE OF THIS TV.
15 cm
10 cm 10 cm
15 cm
7 If you are not going to use this TV for a long period of time, be sure to
disconnect the AC plug from the AC socket.
8 The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
WARNING: <AV-21WX25 only>
A REMOVABLE PLASTIC COVER IS FIXED TO THE
TELEVISION’S FRONT AUDIO/VIDEO CONNECTOR. TO
PREVENT THIS COVER FROM BEING ACCIDENTALLY
SWALLOWED BY BABIES OR CHILDREN, REMOVE IT
FROM THE TELEVISION AND STORE IT IN A SAFE
PLACE. IF THE COVER IS SWALLOWED SEEK THE
ADVICE OF A DOCTOR IMMEDIATELY.
<AV-21M, AV-25M, AV-29M Series>
YOU CAN DETACH THE PROTECT SHEET ON THE TOP
AND BOTTOM OF FRONT FRAME IF YOU NEEDED.
THE FRONT BUTTON DOOR OF THE TV SHOULD BE
PULLED OUT FROM ITS BOTTOM. DO NOT PRESS THE
UPPER PART, OR YOUR FINGER MAY BE PINCHED.
✘
PULLPULL
✓
2
Knowing your TV’s features
Main features
DVD FUNCTIONJust connect DVD player to the television. The television will detect DVD signal and display
PIP (Picture in Picture)You can view two different sources (e.g. TV programme and VCR sources) at the same
EXIT
TELETEXTYou can view teletext programmes which are broadcasted by some TV channels. Teletext
A2/NICAMYou can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2
(STEREO / I■II)or NICAM Sound-multiplex system.
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
1
AI ECOTV detects the brightness of your room and automatically adjust the picture brightness to a
AI VOLUMETV adjusts the volume automatically to the same level for all TV channels to avoid sudden
3
2
4
Confirm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number. The
model number is indicated at the rear of your TV. When you press a button concerned to a function that is
not available for your TV, it does not work and the logo “Ø” appears on the screen.
picture on the screen automatically and you can adjust pictures and sound while you are
watching DVD as your desire.
time.
programme is an information in text form.
suitable level for a better eye care.
change of the volume when selecting different TV channel or selecting Video Mode.
AV-29VX15
AV-29VX25
AV-29WX25
AV-29JS25
AV-29MS25
AV-29MX55
AV-29MX75
AV-25VX15
AV-25MS25
AV-25MX55
AV-25MX75
AV-21VX15
AV-21WX25
AV-21MS25
AV-21MX55
AV-21MX75
3
Remote control buttons and basic functions
No. PressTo
1 POWERTurn on or off the TV from standby mode.
2 MENU/OKDisplay menu and confirm selected function.
3 5 / ∞ / 2 / 3 Select and adjust menu function.
4 CHANNEL -/+ Select the desired channel number.
5 VOLUME -/+Adjust the volume level.
6 TV/VIDEOSelect TV or video terminal input.
EXITOn the other hand, you can use this button to EXIT from the menu.
7 MUTINGTurn off the volume.
8 DISPLAYDisplay the programme number or video terminal number, stereo/bilingual broadcast system
/BACKand PR list (channel list) on the screen.
9 0~9, -/--Select the programme number. For two digits programme number, press -/--, then press the
! RETURN
Press this button again to resume the volume.
You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list.
2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are
indicated with coloured mark.
On the other hand, you can use this button to return to the previous menu.
number button.
+
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
1
8
2
!
4
6
EXIT
3
7
9
5
4
Remote control buttons and basic functions (continued)
How to operate menus and menus locations
To
Display the MENU
Display the top
menu
Display the 2nd
menu
Display the 3rd
menu
Return to the
previous menu
Choose the setting
of a function
Adjust the effect
level of a function
Display the sub
menu of a function.
Press the MENU/OK button 2.
Press 5/∞ buttons 3 to choose a
menu title. Then press MENU/OK
button 2.
Press 5/∞ buttons 3 to choose a
menu title. Then press MENU/OK
button 2.
Press 5/∞ buttons 3 to choose a
menu title. Then press MENU/OK
button 2.
Press the DISPLAY/BACK button
8.
Press 5/∞ buttons 3 to choose
a function. Then press the 2/3
buttons 3 to change the setting.
Press 5/∞ buttons 3 to choose
a function. Then press the 2/3
buttons 3 to adjust the effect
level.
Press the 5/∞ buttons 3 to
choose a function. Then press
MENU/OK button 2 to display
the sub menu.
The following chart shows locations of functions in menus. In this manual,
location of a function is described as follows:
MENUTop menu
MENU2nd menu
Top menu
Note: Some functions have the 4th menus as the sub-menus.
Operation
2nd menu
Note
To exit the MENU,
press the DISPLAY/
BACK button 8 or
choose EXIT menu
or TV/VIDEO/EXIT
button 6.
Press ∞ button 3 to
display the next page
for more functions.
–
Press the TV/VIDEO/
EXIT button 6 to
exit from the menu.
–
3rd menu
Top menu2nd menuLocation 3rd menuLocation
MENU PICTUREPICTURE MODEP.9––
SOUNDSTEREO/
FEATURESDVD MENUP.16
INSTALLSETUP TOURP.18––
EXIT––––
PICTURE SETTING P.10CONTRASTP.10
WHITE BALANCE P.10––
VNRP.17
I■II
AI VOLUMEP.15––
SOUND MODEP.14––
EQUALIZERP.15––
BALANCEP.14––
CINEMA SURROUND
OFF TIMERP.17––
CHILD LOCKP.17––
COMPRESS (16:9)
AI ECO SENSORP.11––
AUTO PROGRAM P.19––
EDIT/MANUALP.19DELETE, MOVE,P.19-
COLOUR SYSTEM P.9––
LANGUAGEP.17LANGUAGEP.17
TEXT LANGUAGE P.13TEXT LANGUAGEP.13
VIDEO-2 SETTING P.18––
BLUE BACKP.11––
PICTURE TILTP.11––
BRIGHTP.10
SHARPP.10
COLOURP.10
TINTP.10
P.15––
P.15––
AUTO SIGNAL DETECT
DVD PICTURE MODE
TINT COLOUR
WHITE BALANCE
SOUND MODE
CINEMA SURROUND
P.11––
MANUAL, INSERTP.20
P.16
P.16
P.16
P.16
P.16
P.16
5
TV buttons and functions
The illustrations shown below is for AV-29VX15, AV-25MX75 and AV-21MX75 only, which are used for explanation purpose.
Your TV may not look exactly the same as illustrated.
Front of the TV
AV-29VX15
!9 8765
MENU
VL/MONOR
L/MONO
VR
IN (VIDEO-3)
IN (VIDEO-3)
- CHANNEL +- VOLUME +
OK
MENU
TV/VIDEO
CHANNEL
VOLUME
TV/VIDEO
EXIT
OK
EXIT
2341
POWER
AV-21MX75/AV-25MX75
!9
V
R
L / M
O
N
O
IN
(
V
ID
E
O
-
3
)
87 6
CHANNEL
MENU
OK
VOLUME
2431
POWER
Rear of the TV
AV-29VX15
COMPONENT
VIDEO-1
(VIDEO-2)
MONO
OUTPUT
INPUT
V
Y
/
V
LRRL
B
C
/
MONO
C
R
"
#
$
INPUT
S
OVER
V
L
/
R
%
No. Button/terminal DescriptionPage
1 L (main power) Press to turn on or turn off the TV’s main power.–
2 POWER lampIndicate the TV is being turned on or off.–
No colour : TV’s main power is being turned off.
Red: TV’s main power is being turned on.
Note: When you turn off the power switch while TV is in standby
mode, the light of power lamp will be off in 10 -15 seconds.
3 ECO sensor–
4 Remote control sensor–
5 TV/VIDEO/EXIT
Press to select TV or Video terminal input or exit from menu.
6 VOLUME -/+Press to adjust the volume level.–
7 CHANNEL -/+Press to select the desired channel.–
8 MENUPress to display the menu.–
9 IN (VIDEO-3)Video and audio input jacks for VIDEO-3 mode.22
!Headphone jack.22
"Aerial socket.7
# OUTPUTVideo and audio output jacks. (The component video22
signal cannot be output.)
$ COMPONENTVideo or component video, and audio input jacks for22
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting
the “VIDEO-2 SETTING” function (see page 18).
% VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-17
mode
How to operate the menus with the TV button
TV button
Work as same as the button on the
remote control unit
Note
MENUMENU/OK buttonTo display main menu and exit
menu after finish setting.
CHANNEL -/+ ∞/5 buttonTo select menu function.
VOLUME -/+2/3 buttonTo adjust the desired function.
–
6
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
1 Connecting the aerial cable.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable (or S-VIDEO cable if available) and audio
cables. For details, see the manual of your VCR.
Rear of TV
AV-29VX15
To video
output
To S-video
output
VCR
To audio
output
To aerial input
To RF
output
The illustration shown is just a sample. It may not be same as your
TV.
VHF/UHF outdoor aerial
COMPONENT
VIDEO-1
(VIDEO-2)
OUTPUT
INPUT
INPUT
S
OVER
V
Y
V
/
V
LRRL
L
C
B
/
/
MONO
MONO
C
R
R
2 Connecting the compatible main plug to the AC outlet.
3 Inserting batteries into the remote control.
Insert two batteries by following the + and polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit
new batteries. The supplied batteries are for testing,
not regular use.
4 Turn on the TV by pressing the main power button.
JVC logo appears on the screen.
JVC logo will appear on the screen again at the phase of “SETUP
TOUR RESTART?” function. Then the initial setting can be
performed according to page 8.
7
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below:
LANGUAGETEXT LANGUAGE
ENGLISH
кмллдав
FRANÇAIS
MENU : OK
DISPLAY : BACK
TV/VIDEO : EXIT
• Press 5/∞ button to
select your desired
language*.
TEXT LANGUAGE
GROUP–1
GROUP–2
GROUP–3
GROUP–4
MENU : OK
DISPLAY : BACK
TV/VIDEO : EXIT
• Press 5/∞ button to
select your desired
Teletext language
group*. For details,
see page 13.
(For JS25/MS25/
MX75/VX25/WX25
series only)
AUTO PROGRAM
22%
MENU : OK
CC 12
• TV will start searching
for the channels.
To stop AUTO
PROGRAM, press
MENU/OK button.
EDIT
PR CH/CC
AV
■
1 CH 04
■
2 CH 76
■
3 CH 78
■
4 CH 05
5 CH 28
6 CH 10
MENU : OK
MOVE
3
■
INSERT
■
DELETE
■
MANUAL
• To complete the initial
setting, press the
MENU/OK button. To
edit the channel list,
see page 19.
AUTO PROGRAM
SETUP TOUR RESTART?
■
: YES
MENU : NO
• After that, when turn on the
TV at the next time.
“SETUP TOUR
RESTART?” will be
displayed.
Press the MENU/OK button
to cancel the SETUP
TOUR RESTART function.
If you want to make initial
settings again when the
next time you turn on the
TV, press the Red button to
activate the SETUP TOUR
RESTART function.
* If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/кмллдав/ / /FRANÇAIS, you
can select the TEXT LANGUAGE group from GROUP-1 to GROUP-4.
If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/кмллдав/
/MELAYU/INDONESIA,
you can select the TEXT LANGUAGE group from GROUP-1 to GROUP-3.
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.