JVC AV-21LS, AV-25LS, AV-29LS, AV-34LS, AV-21LX User Manual

...

COLOUR TELEVISION

INSTRUCTIONS

Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

LS series:

AV-21LS AV-25LS AV-29LS AV-34LS

LX series:

AV-21LX AV-25LX AV-29LX AV-29LX1 AV-34LX

LXB series:

AV-21LXB AV-25LXB AV-29LXB

LCT0935-001B-H 0701-Ki-NV-JMT

Contents

Safety precautions 2 Preparation 3

1 Confirm which remote control you have 2 Insert the batteries into the remote control 3 Connecting the aerial and VCR 4 Connecting other devices 5 Connect the power cord to the AC outlet 6 Initial setting

...............................................

..................

..........................

... ...

...

Basic operation 7 Remote control buttons and functions 8

ECO SENSOR button PICTURE MODE button COLOUR SYSTEM button SOUND SYSTEM button

button SUPER BASS button MUTING button DISPLAY button OFF TIMER button RETURN + button CHANNEL SCAN button

.....................................

.................................

.............................

...............................

.............................................

.....................................

.............................................

.........................................

........................................

..............................

10 10

Viewing teletext programmes 11, 12 Using the TV’s menus 13

Basic operation

...........................................................

INPUT PICTURE TILT

...............................................................

VNR COMPRESS (16:9) AUTO SHUTOFF CHILD LOCK BLUE BACK VIDEO-2 SET Picture Adjustments Sound Adjustments MONO SURROUND AI VOLUME AUTO CH PRESET MANUAL CH PRESET

..............................................................

SKIP LANGUAGE

Attaching the Twin Port Bass Blaster Unit

............................................

...............................................

........................................

..........................................

.................................................

..................................................

................................................

....................................

.....................................

..................................................

.......................................

..................................

..................................................

13 14 14 14 14 15 15 15 16 16 16 17 17 17 18 19 19

TV buttons and parts 21 Using the buttons on the TV 22 Troubleshooting 23 Specifications Back cover

3 3 4 5 5 6

8 8 8 8 9 9 9 9 9

Safety precautions

WARNING

• To prevent fire or shock hazard, do not expose the TV to rain or moisture.

CAUTION

• Operate only from the power source indicated on the rear of the TV.

• Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord.

• Never block or cover the cabinet openings for ventilation. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV more than the minimum distances shown in the diagram.

• Do not allow objects or liquid into the cabinet openings.

• In the event of a fault, unplug the TV and call a service technician. Do not attempt to repair it by yourself or remove the rear cover.

• The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

• When you don’t use this TV for a long period of time, be sure to unplug it.

10 cm 15 cm

10 cm

15 cm

<AV-21LXB and AV-25LXB only>

The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the Twin Port Bass Blaster Unit correctly on the TV.

Preparation

1 Confirm which remote control you have

Your TV comes with one of the three remote controls shown below. Functions you can operate differ depending on the type of remote control.

LS series LX series LXB series

DISPLAY

CHANNEL VOLUME

SYSTEM

COLOUR

SOUND MUTING

TV/VIDEO

I/II

PICTURE MODE

RETURN

CHANNEL SCAN

TV/TEXT

ECO SENSOR

REVEAL HOLD INDEX STORE

MODE SIZE SUBPAGE CANCEL

RM-C352 REMOTE CONTROL UNIT

POWER

123

456

7809

OFF TIMER

TEXT

DISPLAY

CHANNEL VOLUME

SYSTEM

SOUND MUTING

COLOUR

TV/VIDEO

PICTURE MODE

CHANNEL SCAN

-/--

RETURN

ECO SENSOR

RM-C357 REMOTE CONTROL UNIT

POWER

123

456

7809

-/--

OFF TIMER

DISPLAY

SUPER

BASS

CHANNEL VOLUME

SYSTEM

SOUND MUTING

COLOUR

TV/VIDEO

123

456

PICTURE MODE

CHANNEL SCAN

7809

RETURN

ECO SENSOR

RM-C356 REMOTE CONTROL UNIT

2 Insert the batteries into the remote control

Correctly insert two batteries, observing the , and . polarities and inserting the end first.

POWER

-/--

OFF TIMER

CAUTION:

Follow the cautions printed on the batteries.

Notes:

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use.

Preparation

3 Connecting the aerial and VCR

• Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method.

• Turn off all the devices including the TV.

• Connecting cables are not supplied.

• When connecting monaural audio to the TV, use the L/MONO jack.

• If your TV has an S-connector, you can connect an S-VIDEO compatible device (such as an S-

VHS VCR) to the S-connector with an S-VIDEO cable and enjoy the high quality picture of the SVIDEO signal (Y/C signal). In that case, do not connect it to the TV with a video cable.

• If you connect the VCR to the TV only with an aerial cable, you should preset the video channel from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH PRESET” on page 18 and preset it manually.

Connecting the aerial

VIDEO-1

INPUT

COMPONENT

(

)

VIDEO-2

INPUT

OUTPUT

VHF/UHF outdoor aerial

MONO

Connecting the aerial and VCR

To video output

To S-video output

VCR

To audio output

To aerial input

VHF/UHF outdoor aerial

COMPONENT

VIDEO-1

(

)

OUTPUT

VIDEO-2

INPUT

OVER

To RF output

MONO

RRRC

MONO

Preparation

4 Connecting other devices

If you are not connecting any other devices, skip step 4 and perform step 5.

• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.

• The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output teletext programmes, S-VIDEO signals or component video signals. Also it cannot output any signals when the TV is turned off.)

• Connect components outputting a component signal (Y/C the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 16.)

• The following illustrations are for the AV-29LS. Your TV’s front and rear pannels may not look exactly like the illustrations.

B/CR signal), such as a DVD player, to

Front

Headphones

Rear

VIDEO-1

INPUT

MONO

RRR

COMPONENT

(

VIDEO-2

INPUT

MONO

)

OUTPUT

L/MONOVR

IN (VIDEO-3)

Camcorder or TV game

VCR (for playing) DVD player

(composite signals)

VCR (for recording)

DVD player

(component video signals)

5 Connect the power cord to the AC outlet

Preparation

6 Initial setting

When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings.

1 Press the Main power button

on the TV.

The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.

POWER lamp Main power button

MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

button

MENU m

buttons

DISPLAY

CHANNEL VOLUME

POWER

MENU t

buttons

• The JVC logo does not appear if your TV has been turned on once before. In this case, use the LANGUAGE and AUTO CH PRESET functions to perform the initial settings. For details, see pages 17 and

19.

2 Press the MENU M buttons to select language.

3 Press the MENU T buttons to select “AUTO CH PRESET”.

4 Press the MENU M buttons to start the AUTO CH PRESET function.

“>>>ON SEARCH” is displayed on the screen.

When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO CH PRESET function operation is completed.

To stop the AUTO CH PRESET function, press the MENU m buttons.

• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH PRESET function. For details, see page 18.

This completes initial setting. Now you’re ready to enjoy your JVC TV.

Basic operation

• The illustration below is for the remote control RM-C352 supplied with LS series models. Your remote control may not look exactly like the illustrations.

DISPLAY

CHANNEL VOLUME

SYSTEM

SOUND MUTING

COLOUR

TV/VIDEO

I/II

PICTURE MODE

CHANNEL SCAN

TV/TEXT

REVEAL HOLD INDEX STORE

MODE SIZE SUBPAGE CANCEL

123

456

7809

RETURN

ECO SENSOR

TEXT

RM-C352 REMOTE CONTROL UNIT

POWER

-/--

OFF TIMER

1 Press the POWER button to turn

your TV on.

• If your TV does not turn on, press the Main power button on the TV then press the POWER button again.

• You can also turn on your TV by pressing any of the following buttons;

- the CHANNEL m button

- the Number buttons

- the TV/VIDEO button

2 Select a channel.

■ Press the CHANNEL m button.

• Up/down selection cannot be selected for channels to which the SKIP has been set to “YES”. See page 19.

■ Press the Number buttons to enter the channel number.

• If you want to enter a two-digit number,

press the -/-- button to select the two digit mode “--”, then enter the channel number.

3 Press the VOLUME M button to

adjust the sound.

4 To turn your TV off, press the

POWER button.

• We recommend that you press the Main power button on the TV to turn the main power off if you do not plan to use your TV for a long time or if you wish to save energy.

If the picture is not clear:

Press the COLOUR SYSTEM button to select another colour system, see page 8.

If the sound is not clear:

Press the SOUND SYSTEM button to select another sound system, see page 8.

Viewing Images from an External Device:

Press the TV/VIDEO button to select the VIDEO mode.

• You can also use the INPUT function to select the VIDEO mode. For details, refer to page 14.

Remote control buttons and functions

ECO SENSOR button

You can adjust this TV so that the screen automatically adjusts to the optimum contrast according to the brightness of your room. This function reduces eye strain and the power consumption of this TV.

Press this button to select the desired mode.

DIGITAL ECO SENSOR DISPLAY:

The ECO SENSOR function switches on. In this mode, the clover mark indicating the brightness of your room is displayed for several seconds each time the brightness changes. The number of clover marks displayed on screen increases as your room becomes darker.

DIGITAL ECO SENSOR:

The ECO SENSOR function switches on. However, in this mode, the clover mark will not be displayed.

DIGITAL ECO SENSOR OFF:

The ECO SENSOR function switches off.

PICTURE MODE button

You can select one of three picture adjustment settings as you like.

Press this button to select a mode.

BRIGHT:

Heightens contrast and sharpness.

STANDARD:

Standardizes picture adjustments.

COLOUR SYSTEM button

If the picture is not clear or no colour appears, change the current colour system to another colour system.

Press this button to select the colour system.

AUTO PAL

NTSC4.43

SECAM

NTSC3.58

AUTO:

Automatic colour system selection.

• For the colour systems in each country or region, see the table“Broadcasting systems” on the back cover.

• If the picture is not normal in the AUTO mode, change the AUTO mode to another colour system.

SOUND SYSTEM button

If the sound is not clear even when the picture appears normal, change the current sound system to another sound system.

Press this button to select the sound system.

B/G I D/K M

• For the sound systems in each country or region, see the table “Broadcasting systems” on the back cover.

• You cannot select any sound system when in a VIDEO mode.

SOFT:

Softens contrast and sharpness.

• Pressing this button returns all the picture set-

tings in “MENU 4” to their default settings.

Remote control buttons and functions

button

< LS series only >

You can select a sound setting for stereo broadcast programmes and bilingual programmes.

Press this button to select a sound setting.

: Stereo sound : Bilingual I (sub I) sound : Bilingual II (sub II) sound : Monaural sound

MONO : Cancels the multi-sound function,

and the sound becomes monaural.

• If you have poor reception of a stereo broadcast, you can change from stereo sound ( ) to monaural sound ( ) so that you can hear the broadcast more clearly and easily.

• If the multi-sound function cannot work normally due to poor signal quality, noise may be included in the sound, or the sound may change many times. If this happens, change the sound setting to MONO mode to cancel the multi-sound function.

SUPER BASS button

< LXB series only >

You can enjoy a powerful bass sound by using the SUPER BASS (Super Bass Reflex) function.

Press this button to turn the SUPER BASS function on or off.

• To use this function, you must first mount the Twin Port Bass Blaster Unit packaged with the TV on top of the TV. For details, see page 20.

MUTING button

You can turn the sound off instantly.

Press this button.

To turn the sound on, press this button again.

DISPLAY button

You can continuously display the current channel number or VIDEO mode on the screen.

Press this button.

To turn the display off, press this button again.

• When selecting a VIDEO mode with no signal, indication of the VIDEO mode becomes fixed on the screen.

OFF TIMER button

You can set the TV to automatically turn off after a set time.

Press this button to select the period of time.

• You can set the period of time to a maximum of 120 minutes in 10 minute increments.

• 1 minute before the OFF TIMER function turns off the TV, “GOOD NIGHT!” appears.

To display the remaining time, press this button once.

To cancel the OFF TIMER function, press this button to set the period of time to 0.

• The OFF TIMER function will not turn off the TV’s main power.

Remote control buttons and functions

RETURN + button

You can set a channel you frequently view to the Return Channel and you can view that channel at any time with one-touch.

To set the channel to the Return Channel:

1 Select the channel you want to set

to the Return Channel.

2 Press this button and hold until the

message “RETURN PLUS PROGRAMMED!” appears.

• When you turn off the TV, the Return Channel setting is cancelled.

To view the Return Channel:

Press this button.

• You can view two channels (current channel and Return Channel) alternately by pressing this button.

To cancel the Return Channel setting:

Press this button and hold until the message“RETURN PLUS CANCELLED!” appears.

If no channel is set to the Return Channel:

You can view the channel selected right before the current channel by pressing this button.

CHANNEL SCAN button

You can quickly view all TV channels programmes that you can view on your TV, and search for the programme you want to view.

1 Press this button to start scanning

TV channels.

The TV channel programmes are each displayed for several seconds.

• The programmes of TV channels for which

the SKIP function is set to “YES” are not displayed.

2 When you find the programme you

want to view, press this button again to stop scanning.

Viewing teletext programmes

< LS series only >

TV/TEXT

REVEAL

I/II

PICTURE MODE

CHANNEL SCAN

TV/TEXT

REVEAL HOLD INDEX STORE

HOLD

MODE

MODE SIZE SUBPAGE CANCEL

SIZE

456

7809

RETURN

ECO SENSOR

TEXT

OFF TIMER

-/--

Coloured buttons

STORE

INDEX

CANCEL

SUBPAGE

■ Basic operation

1 Select a TV channel with a teletext

programme.

2 Press the TV/TEXT button to change

the TV mode to the teletext mode.

The mode cycles as follows.

TV mode TEXT mode (TEXT only)

MIX mode (TV and TEXT)

Using the List Mode

You can store the numbers of your favourite teletext pages in the List mode and call them up quickly using the coloured buttons.

To store the page numbers:

1 Press the MODE button to engage

the List mode.

The stored page numbers are displayed at the bottom of the screen.

2 Press a coloured button to select a

position. Then press the Number buttons to enter the page number.

3 Press and hold down the STORE

button.

The four page numbers blink white to indicate that they are stored in memory.

To call up a stored page:

1 Press the MODE button to engage

the List mode.

2 Press a coloured button to which a

page has been assigned.

To exit the List mode, press the MODE button again.

3 Select a teletext page by pressing

the CHANNEL M button, Number buttons or coloured buttons.

To return to the TV mode, press the TV/ VIDEO button or the TV/TEXT button.

• If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station.

Viewing teletext programmes

REVEAL

Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text.

Each time you press the REVEAL button, text is hidden or revealed.

HOLD

You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received.

Press the HOLD button

To cancel the HOLD function, press the HOLD button again.

CANCEL

You can watch a TV programme even when in the teletext mode.

1 Press the Number button to enter a

page number, or press a coloured button.

The TV starts searching for a teletext page.

INDEX

You can return to the index page instantly.

Press the INDEX button.

In the List mode:

Returns to the page number displayed in the lower left area of the screen.

SUBPAGE

Some teletext pages include sub-pages that are automatically displayed. You can hold any sub-page, or view it at any time.

1 Press the SUBPAGE button to

operate the Sub-page function.

2 Press the Number buttons to enter a

sub-page number.

Example:

3rd sub-page ➞ press 0, 0, 0 and 3.

• You can also select a sub-page by pressing the red or green button.

To cancel the Sub-page function, press the SUBPAGE button again.

2 Press the CANCEL button.

The TV programme appears.

When the TV finds the teletext page, its page number appears in the upper left of the screen.

3 Press the CANCEL button to view

the teletext page.

• Pressing the CANCEL button cannot change the teletext mode to the TV mode.

SIZE

You can double the height of the teletext display.

Press the SIZE button.

The teletext display changes cyclically.

Using the TV’s menus

This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus.

4 Press the MENU M buttons to

change function settings.

DISPLAY

button

MENU m

buttons

DISPLAY

CHANNEL VOLUME

POWER

MENU t

buttons

Example:

Changes the AUTO SHUTOFF setting.

MENU 2 AUTO SHUTOFF OFF CHILD LOCK OFF BLUE BACK ON VIDEO-2 SET COMPONENT

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

MENU 2 AUTO SHUTOFF ON CHILD LOCK OFF BLUE BACK ON VIDEO-2 SET COMPONENT

⇔

SELECT BY EXIT BY OPERATE BY -+

• With some functions, the operation method may differ.

DISPLAY

■ Basic operation

1 Press the MENU T buttons.

One of the 5 menus is displayed.

MENU number

MENU 1

The icon on the left indicates the currently selected function.

2 Repeatedly press the MENU T

buttons to display a desired menu.

• If you hold down the y button, the next

menu is displayed.

• If the selected function is on the first line,

pressing the r button displays the preceding menu.

3 Repeatedly press the MENU T

buttons to select a desired function.

INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

5 Press the DISPLAY button to turn

the display off.

• To operate a menu using the buttons on the front panel of the TV, refer to “Operating menus” on page 22.

Using the TV’s menus

INPUT

You can view images from VCRs or other devices connected to your TV.

1 Press MENU T to display the

“MENU 1” menu, then select “INPUT”.

MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Press MENU M to select the VIDEO

mode.

TV mode changes to VIDEO mode.

PICTURE TILT

< AV-29 series and AV-34 series only >

There are cases where the Earth’s magnetic force may make the picture tilt. If this happens, you can correct the picture tilt.

1 Press MENU T to display the

“MENU 1” menu, then select “PICTURE TILT”.

MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

VNR

You can reduce picture noise.

1 Press MENU T to display the

“MENU 1” menu, then select “VNR”.

MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Press MENU M to select “ON”.

To cancel the VNR function, select “OFF”.

COMPRESS (16:9)

This function converts a normal picture (4:3 aspect ratio) into a wide picture (16:9 aspect ratio). Use for pictures with a 16:9 aspect ratio that have been squeezed into a normal picture (4:3 aspect ratio), to restore their original dimensions.

1 Press MENU T to display the

“MENU 1” menu, then select “COMPRESS (16:9)”.

MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Continue pressing MENU M until

the picture becomes level.

2 Press MENU M to select “ON”.

To cancel the COMPRESS (16:9) function, select “OFF”.

Using the TV’s menus

AUTO SHUTOFF

You can set your TV to turn off if no signals are received for about 15 minutes or longer after the end of a broadcast.

1 Press MENU T to display the

“MENU 2” menu, then select “AUTO SHUTOFF”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Press MENU M to select “ON”.

To cancel the AUTO SHUTOFF function, select “OFF”.

• The AUTO SHUTOFF function does not turn off the TV’s main power.

• The AUTO SHUTOFF will not work for a VIDEO mode.

CHILD LOCK

You can disable the front control buttons of the TV. When this function is set to “ON”, the TV can be operated using only the remote control. Use this function to prevent children from operating the TV without parental consent.

BLUE BACK

You can mute the sound and change the picture into a blue screen while no signals are received by the TV, or when the signals are unstable.

1 Press MENU T to display the

“MENU 2” menu, then select “BLUE BACK”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT

SELECT BY EXIT BY OPERATE BY -+

2 Press MENU M to select “ON”.

To cancel the BLUE BACK function, select

“OFF”.

• To view a broadcast even when the recep-

tion signal is poor, set the BLUE BACK function to “OFF”.

• Even when the BLUE BACK function is set

to “OFF”, the sound may not be audible.

DISPLAY

1 Press MENU T to display the

“MENU 2” menu, then select “CHILD LOCK”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Press MENU M to select “ON”.

To cancel the CHILD LOCK function, select “OFF”.

• The CHILD LOCK function is canceled when you turn the power off.

Using the TV’s menus

VIDEO-2 SET

Set the VIDEO-2 SET correctly according to the video signal input from the external device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be displayed.

1 Press MENU T to display the

“MENU 2” menu, then select “VIDEO-2 SET”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT

SELECT BY EXIT BY OPERATE BY -+

2 Set the VIDEO-2 SET according to

the video signal input from the VIDEO-2 terminal.

If a normal video signal (composite video signal) is input:

Press the MENU m buttons to select “VIDEO”.

If a component video signal (Y/C signals) is input:

Press the MENU m buttons to select “COMPONENT”.

DISPLAY

B/CR

Picture Adjustments

You can adjust the picture as you like.

1 Press MENU T to display the

“MENU 4” menu.

MENU 4 TINT COLOUR BRIGHT CONT. SHARP

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Press MENU T to select an item

and press MENU M to adjust it.

TINT* - : Reddish + : Greenish COLOUR - : Lighter + : Deeper BRIGHT - : Darker + : Brighter CONT. - : Lower + : Higher SHARP - : Softer + : Sharper

* TINT (tint) is displayed only when viewing

images from NTSC3.58 or NTSC4.43 colour systems.

Sound Adjustments

You can adjust the sound as you like.

1 Press MENU T to display the

“MENU 5” menu.

MENU 5 BASS TREBLE BALANCE AI VOLUME ON MONO SURROUND ON

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Press MENU T to select an item

and press MENU M to adjust it.

TREBLE - : Weaker + : Stronger BASS - : Weaker + : Stronger BALANCE - : Left + : Right

Using the TV’s menus

MONO SURROUND

< LX series and LXB series only>

You can enjoy normal monaural sound more by converting it into a stereo-like sound.

1 Press MENU T to display the

“MENU 5” menu, then select “MONO SURROUND”.

MENU 5 BASS TREBLE BALANCE AI VOLUME ON MONO SURROUND ON

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Press MENU M to select “ON”.

To cancel the MONO SURROUND function, select “OFF”.

AI VOLUME

You can prevent the sudden increase or decrease of volume that occurs when changing channels or switching VIDEO modes.

1 Press MENU T to display the

“MENU 5” menu, then select “AI VOLUME”.

MENU 5 BASS TREBLE BALANCE AI VOLUME ON MONO SURROUND ON

SELECT BY EXIT BY OPERATE BY -+

2 Press MENU M to select “ON”.

To cancel the AI VOLUME function, select “OFF”.

DISPLAY

• The AI VOLUME function may not operate as expected if the sound input level from a broadcast station (or video software) is extremely low.

• The AI VOLUME function for TV mode and VIDEO mode can be set separately. For example, you can set it to be off in TV mode and on in VIDEO mode. If you set the AI VOLUME function while viewing a TV channel, the setting is registered as the setting for TV mode. If you set the AI VOLUME function while viewing images from a VIDEO terminal, the setting is registered as the setting for VIDEO mode.

AUTO CH PRESET

You can automatically preset all TV channels that can be received by your TV to channels.

1 Press MENU T to display the

“MENU 3” menu, then select “AUTO CH PRESET”.

MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH

SELECT BY EXIT BY OPERATE BY -+

2 Press MENU M to start the AUTO

CH PRESET function.

“>>>ON SEARCH” is displayed on the screen.

When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO CH PRESET function operation is completed.

To stop the AUTO CH PRESET:

Press the MENU m button.

• The AUTO CH PRESET function does not preset a TV channel to the AV channel (channel number 0).

• If the TV cannot preset the TV channel you want to view, preset it manually. For details, see “MANUAL CH PRESET” on page 18.

DISPLAY

Using the TV’s menus

MANUAL CH PRESET

You can manually preset desired TV channels to desired channels.

If the picture is not clear:

Fine-tune the TV channel.

1 Press MENU T to display the

“MENU 3” menu, then select “MANUAL CH PRESET”.

MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH

SELECT BY EXIT BY OPERATE BY -+

DISPLAY

2 Press MENU M.

The sub-menu is displayed.

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY SEARCH BY VOL-+

DISPLAY

• The channel number is displayed as a PR number. For example, channel 1 will be displayed as PR 1. However, the AV channel will be displayed as AV.

3 Press MENU M to select the

channel number.

4 Press VOLUME M to start search-

ing for the TV channel.

“>>>” or “<<<” is displayed on the screen.

When the TV finds a TV channel, the “>>>” or “<<<” display goes out, and the TV channel is preset to the currently selected channel number.

• If the TV channel you want to preset is not displayed, repeat step 4 until the TV finds the TV channel you want to preset.

• To stop the MANUAL CH PRESET function, press any button other than the VOLUME m button.

1 Press MENU t to select “FINE”.

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY FINE BY VOL-+

DISPLAY

2 Hold VOLUME m down to fine-tune

the TV channel so that the best image is displayed on screen.

“>” or “<” indicates that the TV is finetuning the TV channel.

If the sound is not clear:

1 Press MENU t to select “SOUND

SYSTEM”.

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY CHANGE BY VOL-+

DISPLAY

2 Press VOLUME m to select the

appropriate sound system.

• For the sound systems in each country or region, refer to the table “Broadcasting systems” on the back cover.

5 Press MENU T to select

“MANUAL”.

6 Repeat steps 3 to 5 if you want to

preset another TV channel to a channel.

Using the TV’s menus

SKIP

You can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SCAN button.

• Channels to which TV channels have not been preset are automatically set to be skipped.

1 Press MENU T to display the

“MENU 3” menu, then select “MANUAL CH PRESET”.

2 Press MENU M.

The sub-menu is displayed.

3 Press MENU T to select “SKIP”.

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY YES/NO BY VOL-+

4 Press MENU M to select the

channel you want to skip.

5 Press VOLUME M to select “YES”.

The channel is set to be skipped. To cancel the SKIP function, select “NO”.

DISPLAY

LANGUAGE

You can select the language for the on-screen display.

1 Press MENU T to display the

“MENU 3” menu, then select “LANGUAGE”.

MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH

SELECT BY EXIT BY OPERATE BY -+

2 Press MENU M to select

language.

The on-screen display indications are in the selected language.

DISPLAY

6 Repeat steps 4 and 5 if you want to

set another channel to skip.

Attaching the Twin Port Bass Blaster Unit

<AV-21LXB and AV-25LXB only>

The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the Twin Port Bass Blaster Unit correctly on the TV.

Note:

• The SUPER BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly to the TV. For details on the SUPER BASS functions, see page 9.

CAUTION:

• The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a screw. When you use the Twin Port Bass Blaster Unit, pay attention to the following cautions. Otherwise, the Twin Port Bass Blaster Unit or TV may fall over and be damaged, or cause unexpected injury.

- Do not rest your hands or elbows on the Twin Port Bass Blaster Unit.

- Do not move the TV with the Twin Port Bass Blaster Unit mounted on top of the TV. Before you move

the TV, be sure to remove the Twin Port Bass Blaster Unit.

- Do not move the TV by holding the Twin Port Bass Blaster Unit.

1 Place the Twin Port Bass Blaster

Unit on top of the TV making sure that the mounting pin on the bottom of the Twin Port Bass Blaster Unit fits into the mounting hole on the top of the TV.

• When you mount the Twin Port Bass Blaster Unit, make sure that the mounting pin fits properly into the mounting hole. Otherwise, the Twin Port Bass Blaster Unit may slide off the top of the TV. This may damage the Twin Port Bass Blaster Unit or cause unexpected injury.

Twin Port Bass Blaster Unit

2 Firmly insert the Twin Port Bass

Blaster Unit connector into the BASS SPEAKER OUT terminal.

BASS

SPEAKER

OUT

VIDEO-1

INPUT

MONO

RRRCR

COMPONENT

(

VIDEO-2

INPUT

)

MONO

OUTPUT

+ 46 hidden pages