JVC AV-21F24, AV-21L24, AV-21C14, AV-21D14, AV-21E14 User Manual

...

COLOUR TELEVISION

MODEL WITH THE TELETEXT FUNCTION

AV-21F24 AV-21L24

MODEL WITHOUT THE TELETEXT FUNCTION

AV-21C14 AV-21D14 AV-21E14 AV-21F14 AV-21L14 AV-21T14 AV-20N14 AV-14A14 AV-14F14

Knowing your TV’s features Remote control buttons and basic functions.3 TV buttons and functions Setting up your TV Basic setting for picture Advanced setting for picture Original features for picture Basic setting for sound Advanced setting for sound Favorite channel and video setting Customized setting TV channel presetting Additional preparation Troubleshooting Specifications

........................................

..........................................

................................

..........................

..............................

.................................

.........................

...........................

................................

........................

.............

.....................................

.................................

Back cover

10 10 11 12 13 15 15

5 6 8 9 9

INSTRUCTIONS

GGT0035-001B-H

Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual throughly before you begin.

Safety Instructions

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING

RULES REGARDING THE USE OF THIS TV.

1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the

mains plug. Do not pull on the power cord.

3 Never block or cover the cabinet ventilation

openings. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV more than the minimum distances as shown in the diagram.

4 Do not allow objects or liquid into the cabinet

10 cm

openings.

5 In the event of a fault, unplug the unit and call a JVC service technician.

Do not attempt to repair it yourself or remove the rear cover.

6 The surface of the TV screen is easily damaged. Be very careful with it when handling

the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

7 If you are not going to use this TV for a long period of time, be sure to disconnect the

AC plug from the AC socket.

8 The apparatus shall not be exposed to dripping or splashing and that no objects filled

with liquids, such as vases, shall be placed on the apparatus.

15 cm

15 cm10 cm

Knowing your TV’s functions

Main features

Function Description

*Teletext You can view teletext programmes which are broadcasted by some TV channels.

Favorite CH (Channel) You can register up to four favorite channels for quick re-call with one-press. AI Volume TV adjusts automatically the volume to the same level for all TV channels to

VNR You can reduce the picture noise when you viewing noisy TV programmes or

White balance You can choose one of three tones of white to match to the video source such

Child lock To prevent accidental operation by your children, you can disable the control

Teletext programme is an information in text form.

avoid sudden change of the volume when selecting different TV channel.

video sources.

as movie, sports, etc. Changing White balance affects the appearance of all other colours on the screen.

buttons on the TV.

* The Teletext function is available for AV-21F24 and AV-21L24 only.

The other models do not have the Teletext function. Please check your TV’s model number. The model number is indicated at the rear of your TV.

2 3 7

Remote control buttons and basic functions

0 4

RM-C1260

WITH THE TELETEXT

FUNCTION

(AV-21F24/AV-21L24)

No.Press To

1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5/∞/2/3 Select and adjust menu function. 4 CHANNEL M Select the desired channel number. 5 VOLUME M Adjust the volume level. 6 TV/VIDEO Select TV or VIDEO terminal input. 7 MUTING Turn off the volume. Press this button again to resume the volume. 8 DISPLAY Display the programme number or video terminal number and PR list (channel

/BACK list) on the screen. You can select the channel using the PR list.

9 0~9, -/-- Select the programme number. For two digits programme number, press -/--,

0 RETURN, a) Return to the frequently view channel with one touch.

1 Press the DISPLAY button once to display the PR list. 2 Press 5/∞/2/3 button to choose a channel, then press the MENU/OK button.

You can confirm the favorite channels in the PR list. The channels set to favorite channels are indicated with coloured mark.

On the other hand, you can use this button to return to the previous menu.

then press the number button.

1 Choose the channel you want to register. 2 Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!”

To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!” appears.

b) Return to the previously viewed channel, if you have not set or have

cancelled the Return channel as above.

RM-C1261

WITHOUT THE

TELETEXT FUNCTION (AV-21C14/AV-21D14/ AV-21E14/AV-21F14/ AV 21L14/AV-21T14/ AV-20N14/AV-14A14/ AV-14F14)

appears.

Remote control buttons and basic functions

How to operate menus and menu locations

TO Operation Note

Display the MENU. Press the MENU/OK button 2.To exit the MENU, press the

Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Press ∞ button 3 to display the

Then press MENU/OK button 2. next page for more functions.

Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title.

Then press MENU/OK button 2.

Display the 3rd menu. Press 5/∞ buttons 3 to choose a menu title.

Then press MENU/OK button 2.

Return to the previous Press the DISPLAY/BACK button* 8.– menu. Choose the setting of Press 5/∞ buttons 3 to choose a function. Press the MENU/OK button 2 to a function. Then press the 2/3 buttons 3 to change the exit from the menu.

setting.

Adjust the effect level Press 5/∞ buttons 3 to choose a function. of a function. Then press the 2/3 buttons 3 to adjust the

effect level.

Display the sub menu Press 5/∞ buttons 3 to choose a function. of a function. Then press MENU/OK button 2 to display –

the sub menu.

DISPLAY/BACK button* 8 or choose EXIT menu.

The following chart shows locations of functions in menus. In this manual, location of a function is described as follows:

MENU Top menu 2nd menu

3rd menu

Note: Some functions have the 4th menus as the sub-menus. *To exit the menu, the on screen display will show BACK indicated in blue. But it doesn’t refer to the

blue button on the remote control. Instead, it refers to the DISPLAY/BACK button on the remote control.

Top menu 2nd menu Location 3rd menu Location

MENU INPUT EXT. INPUT P.12 - -

DISPLAY P.12 - -

PICTURE PICTURE MODE P.8 - -

* If you want to

adjust PICTURE SETTING menu, you must set PICTURE MODE menu to USER.

SOUND AI VOLUME P.10 - -

FEATURES OFF TIMER P.12 - -

INSTALL AUTO PROGRAM P.13 - -

EXIT - - - -

PICTURE SETTING P.8 - -

WHITE BALANCE P.8 - -

PICTURE FEATURES - VNR P.12

FAVORITE CH SETTING P.11

VIDEO SETTING P.11

COLOUR SYSTEM P.8

CHILD LOCK P.12 - -

EDIT/MANUAL P.13 DELETE, MOVE, MANUAL, INSERT P.13

LANGUAGE P.12 LANGUAGE P.12

BLUE BACK P.9 - -

AUTO SHUTOFF P.12 - -

TEXT LANGUAGE P.9 TEXT LANGUAGE P.9

TV buttons and functions

The following illustrations are for AV-21F14 and AV-21T14 only, which are used for explanation purpose. Your TV may not look exactly like the illustrated.

Front of the TV

9 7 4 3 2 18 6 5

AV-21F14

VIDEO AUDIO

IN (VIDEO-2)

9 7 4 2 18 6 5

VIDEO-1

INPUT

IN (VIDEO-2)

VIDEO AUDIO

OUTPUT

VIDEO

AUDIO

AV-21T14

Rear of the TV

0-=

No. Button/terminal Description

1I(main power) Press to turn on or turn off the TV’s main power. 2 Power lamp Indicate the TV is being turned on or off.

3 TIMER lamp Lights when the TV is in the OFF TIMER mode. 4 Remote control sensor 5 VOLUME M Press to adjust the volume level. 6 CHANNELM Press to select the desired channel. 7 MENU Press to display the menu. 8 IN (VIDEO-2) Video and audio input jacks for VIDEO-2 mode. 9 Headphone jack. 0 Aerial socket.

- OUTPUT Video and audio output jacks. = VIDEO-1 INPUT Video and audio input jacks for VIDEO-1 mode.

How to operate the menus with the TV button

TV button

MENU MENU/OK button To display main menu and exit

CHANNEL M ∞/5 button To select menu function. VOLUME M 2/3 button To adjust the desired function.

No colour : TV’s main power is being turned off. Red : TV’s main power is being turned on.

Work as same as the button on the remote control unit

Note

menu after finish setting.

Setting up your TV

CAUTION

• Turn off the equipment including the TV before connecting.

1 Connecting the aerial

To install rod aerial

Install into the top-rear aerial holder. Once installed, it cannot be removed.

*For model 14” series only

VHF/UHF outdoor aerial

Rear of the TV

VIDEO-1

OUTPUT

INPUT

VIDEO

AUDIO

If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable and audio cables. For details, see the manual of your VCR.

indoor aerial

Rod aerial*

Aerial holder

VHF/UHF outdoor aerial

Rear of the TV

VIDEO-1

OUTPUT

INPUT

VIDEO

AUDIO

To audio/video output

VCR

To RF output

To aerial input

The illustration shown is just a sample. It may not be same as your TV.

2 Connecting the compatible main plug

to the AC outlet.

3 Inserting batteries into the remote

control.

Insert two batteries by following the ª and

· polarities and inserting the · end first.

CAUTION:

Follow the cautions printed on the batteries.

Notes:

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use.

4Turn on the TV by pressing the main

power button.

JVC logo appears on the screen.

Setting up your TV (continued)

5 Making the initial settings

Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below :

LANGUAGE

ENGLISH

кмллдав

MELAYU INDONESIA

 

  







•Press 5/∞ button to select your desired

language.

≠

TEXT LANGUAGE

GROUP-1 GROUP-2 GROUP-3

•Press 5/∞ button to select your desired

Teletext language group. For details, see page 9.

(For AV-21F24/AV-21L24 only)

≠

 



 



• Press the red button to cancel the SETUP TOUR RESTART function. If you want to make initial settings again when the next time you turn on the TV, press the MENU/OK button to activate the SETUP TOUR RESTART function.

≠

EDIT

PR CH/CC 7 CH 09 8 CH 11

■

9 CH 13 10 11 12 13

•Proceed to edit the channel list (PR list). For details, see page 13.

• TV will start searching for the channels.

To stop AUTO PROGRAM, press MENU/OK button.

• If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO PROGRAM functions to make the initial settings. Those functions are located in the INSTALL menu.

• If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.

Basic setting for picture

COLOUR SYSTEM

You can select the appropriate colour system when the picture is not clear or no colour appears.

Press the COLOUR SYSTEM button to select a setting.

In TV mode:

AUTO PAL SECAM

In VIDEO mode:

AUTO PAL SECAM

NTSC3.58NTSC4.43

To operate this function with a menu:

MENU PICTURE PICTURE FEATURES

❇

COLOUR SYSTEM

For the colour system in each country or region, see the table below:

Area Country or Region System

Asia, Middle Thailand, India, etc. East China, Vietnam, etc. PAL

Europe

Oceania Australia, New Zealand, etc. PAL

Africa Nigeria, etc. PAL

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore,

Hong Kong, etc. PAL Islamic Republic of Iran, Lebanon,

Saudi Arabia, etc. Philippines, Taiwan, Myanmar, etc. NTSC Russia, etc. SECAM Czech Republic, Poland, etc. PAL Germany, Holland, Belgium, etc. PAL UK, etc. PAL

Republic of South Africa, etc. PAL

Egypt, Morocco, etc. SECAM

PAL

SECAM

PICTURE MODE

You can choose the desired picture setting with one-touch.

Press the PICTURE MODE button to select a setting.

SOFT Softens contrast and sharpness. BRIGHT Heightens contrast and sharpness. STANDARD Standard picture setting. USER You can change this picture setting

as you like. Select USER and adjust following items in the PICTURE SETTING menu. (CONTRAST, BRIGHT, SHARP, COLOUR, TINT*)

*TINT can only be adjusted in NTSC system.

To operate this function with a menu:

❇

MENU PICTURE PICTURE MODE

To return the USER setting to the default, press the blue button when the PICTURE SETTING menu appears.

Adjusting the picture - USER

You can adjust the desired picture setting when selecting USER in PICTURE MODE.

1 Select the USER in PICTURE MODE under

PICTURE menu.

MENU PICTURE PICTURE MODE

❇

USER

2 Select the PICTURE SETTING in PICTURE

menu, then adjust the setting.

MENU PICTURE PICTURE SETTING

❇

CONTRAST 2 : Lower contrast 3 : Higher contrast

BRIGHT 2 : Darker 3 : Brighter SHARP 2 : Softer 3 : Higher COLOUR 2 : Lighter 3 : Deeper TINT* 2 : Reddish 3 : Greenish

*TINT can only be adjusted in NTSC system.

WHITE BALANCE

You can change the white balance of the picture to better match the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose the desired setting.

MENU PICTURE WHITE BALANCE

❇

NORMAL Normal white balance. COOL Bluish white.

WARM Reddish white.

❇ About the basic operations of the menu,

please see the “How to operate menus and menus locations” on page 4.

Advance setting for picture

❇

BLUE BACK

You can set the TV to automatically change to a blue screen and mute the sound if the signal is

MENU INSTALL BLUE BACK

If you wish to continue viewing the poor picture, cancel the BLUE BACK function.

weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF.

Original features for picture

TELETEXT

You can watch the Teletext broadcast channel with TEXT function.

1 Press the TEXT button to select the

desired mode as follows:

TV mode TEXT mode

MIX mode

2 Press the CHANNEL -/+ buttons, number

buttons or colour buttons to select other Teletext pages.

3 Press TEXT or TV/VIDEO button to return

to TV mode.

You can also operate the teletext using the following buttons:

(Hold) Hold a teletext page.

(Reveal) Display the hidden text (e.g. answers to a

5 5

(Size) Enlarge the teletext display. (Index) Return to the index page instantly. (Cancel) Watch TV programme while waiting for a

(Sub-page) Operate the (Sub-page) function.

(Hold) are displayed at the top

The

left of the screen. To cancel, press

quiz). To cancel, press (Reveal) button again.

teletext page. When the teletext page is found, a page number appears at the upper left of the screen. Press (Cancel) to view the teletext page.

Sub-page numbers are displayed at the left of the screen. To cancel sub-page function, press (Sub-page) button again.

(Hold) button again.

2 Press a colour button, then press the

number buttons to enter the page number.

3 Press and hold down the

(Store) button. The page number is blinking white to indicate that they are stored in memory.

4 To store other favorite teletext pages,

repeat Step 2 to 3.

To recall the favorite teletext page, press the MODE button, then press the colour button. To exit the List mode, press the MODE button again. When viewing teletext programme, menu operations are not available. If characters on a teletext programme do not appear properly, change the TEXT LANGUAGE setting.

TEXT LANGUAGE

You can set the Teletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INSTALL menu, then choose the desired language group.

MENU INSTALL TEXT LANGUAGE

❇

GROUP- 1 English, German, Swedish / Finnish /

GROUP- 2 Polish, German, Estonian, Slovenian,

GROUP- 3 Polish, German, Estonian, Lettish,

Depending on the broadcast, the language set may not display properly.

Danish / Hungarian, Italian, French, Spanish / Portuguese, Turkish

Czech / Slovakian, Rumanian

Russian, Ukrainian

Using the List mode

You can store and recall the favorite teletext pages in memory using the colour buttons.

1 In TEXT mode, press the MODE button to

enter the List mode.

❇ About the basic operations of the menu,

please see the “How to operate menus and menus locations” on page 4.

Basic setting for sound

SOUND SYSTEM

You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting.

B/G I D/K

The function is not available in video mode. For the sound system in each country or region, see the table below:

Area Country or Region System

Asia, Middle Thailand, India, etc. East China, Vietnam, etc. D/K

Europe

Oceania Australia, New Zealand, etc. B/G

Africa Nigeria, etc. B/G

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. B/G Indonesia, Malaysia, Singapore,

Hong Kong, etc. I Islamic Republic of Iran, Lebanon,

Saudi Arabia, etc. Philippines, Taiwan, Myanmar, etc. M Russia, etc. D/K Czech Republic, Poland, etc. D/K Germany, Holland, Belgium, etc. B/G UK, etc. I

Republic of South Africa, etc. I

Egypt, Morocco, etc. B/G

B/G

Advanced setting for sound

AI VOLUME

You can adjust the volume of all the channels and video inputs to the same level automatically. Select the AI VOLUME in SOUND menu, then choose ON or OFF.

MENU SOUND AI VOLUME

❇

❇ About the basic operations of the menu,

please see the “How to operate menus and menus locations” on page 4.

Favorite channel and video setting

VIDEO SETTING

PICTURE

PICTURE FEATURES

VIDEO SETTING

VIDEO STATUS

To register the favorite channel

You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue).

1 In TV mode, select a TV channel (PR01- 99)

you desired to register.

2 Press and hold a colour button for 3

seconds or more. “FAVORITE CHANNEL 7 PROGRAMMED!” appears on the screen and current channel is registered.

3 To register other favorite channels, repeat

Step 1 to 2.

To recall the favorite channel, press the colour button. When the TV is in Text mode or menu mode, favorite channel function is not available.

To adjust favorite channel setting (FAVORITE CH SETTING)

You can adjust the picture settings for the favorite channels.

1 Display the PICTURE menu and select

FAVORITE CH SETTING in PICTURE FEATURES menu.

MENU PICTURE PICTURE FEATURES

❇

FAVORITE CH SETTING

2 Select FAVORITE CHANNEL in FAVORITE

CH SETTING menu, then choose the desired favorite channel.

FAVORITE CH SETTING

❇

FAVORITE CHANNEL

FAVORITE CH SETTING

FAVORITE CHANNEL PR 01 CONTRAST BRIGHT SHARP COLOUR TINT EFFECT ON

To adjust the video setting (VIDEO SETTING)

You can adjust the picture settings for video inputs.

1 Display the PICTURE menu and select

VIDEO SETTING in PICTURE FEATURES menu.

❇

2 Select VIDEO STATUS in VIDEO SETTING

menu, then choose the desired video input.

❇

VIDEO SETTING

VIDEO STATUS VIDEO-1 CONTRAST BRIGHT SHARP COLOUR TINT EFFECT ON

3 Select EFFECT, then press 2/3 button to

choose ON. To cancel the settings, choose OFF.

4 Select the desired item that you wish to

adjust.

CONTRAST BRIGHT SHARP

TINT COLOUR

5 Press the MENU/OK button to exit the

menu.

3 Select EFFECT, then press 2/3 button to

choose ON. To cancel the settings, choose OFF.

4 Select the desired item that you wish to

adjust.

CONTRAST BRIGHT SHARP

TINT COLOUR

5 Press the MENU/OK button to exit the

menu.

❇ About the basic operations of the menu,

please see the “How to operate menus and menus locations” on page 4.

Customized setting

MENU INPUT EXT.INPUT

MENU INPUT DISPLAY

VNR

You can reduce the noise. Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function.

MENU PICTURE PICTURE FEATURES

❇

VNR

OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level.

If you select MAX, the picture becomes softer even if the original picture is sharp.

LANGUAGE

You can choose your desired on screen display language. Select the LANGUAGE in the INSTALL menu, then choose a language.

MENU INSTALL LANGUAGE

❇

CHILD LOCK

You can disable the front control buttons of the TV.

Select the CHILD LOCK in the FEATURES menu, then choose ON or OFF.

MENU FEATURES CHILD LOCK

❇

OFF TIMER

You can set the TV to turn off automatically to standby mode after a set time. Press the OFF TIMER button to select a desired period of time.

OFF TIMER

To operate this function with a menu:

MENU FEATURES OFF TIMER

❇

When the elapsed of time left one minute, “GOOD NIGHT!” appears on the screen. You can display the OFF TIMER menu again to confirm or change the remaining time.

AUTO SHUTOFF

You can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast. Select AUTO SHUTOFF in INSTALL menu, then choose ON or OFF.

MENU INSTALL AUTO SHUTOFF

❇

The AUTO SHUTOFF function does not turn off the TV’s main power. The AUTO SHUTOFF function is not available in video mode.

EXT. INPUT (TV/ VIDEO)

You can select TV or video terminal input with one touch. Press the TV/VIDEO button to select an input.

To operate this function with a menu:

❇

DISPLAY

You can display the programme number, video terminal number and PR list on the screen. Press the DISPLAY button to display the information on screen.

To operate this function with a menu:

❇

0 120

You can set the period of time to a maximum of 120 minutes in 10 minutes step.

❇ About the basic operations of the menu,

please see the “How to operate menus and menus locations” on page 4.

TV channel presetting

To register the TV channels automatically

You can register the TV channels into the TV’s channel list automatically.

1 Display the INSTALL menu.

MENU INSTALL

❇

2 Choose AUTO PROGRAM, then press the

MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically.

3 “SETUP TOUR RESTART?” appears.

To start the Press the MENU/OK button. SETUP TOUR Then proceed to step 5 of

To skip the Press the Red button. SETUP TOUR

“Setting up your TV” on page

4 The EDIT menu appears.

To edit the Proceed to the Step 3 of “To channel list edit the channel list (PR list)”

If a channel is Proceed to the Step 3 of “To not registered register the channel manually”

To exit the menu Press the MENU/OK button.

on this page.

For details of “SETUP TOUR”, see page 7.

To register the TV channels manually (MANUAL in the EDIT menu)

You can register the TV channels into the TV’s channel list manually.

1 Display the INSTALL menu.

MENU INSTALL

❇

2 Choose EDIT/ MANUAL, then press the

MENU/OK button. EDIT menu appears.

EDIT

PR CH/CC 7 CH 09 8 CH 11

■

9 CH 13 10 11 12 13

3 Choose the channel which you want to

4 Press the blue button to activate the

MANUAL function. The sound system of the channel appears at the right of the CH/CC number.

5 Press the 3 button to choose an appropri-

ate sound system. For details, see “SOUND SYSTEM” on page 10.

6 Press the green or red button to search for

the TV channel. Searching stops when a channel is found and displayed.

7 Repeat step 5 until your desired TV

channel appears.

If the reception Press the blue or yellow button is poor to fine tune the TV channel.

If noisy sound Press the 3 button to choose is heard an appropriate sound system.

8 Press the MENU/OK button to exit the

menu.

To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu)

You can edit the TV channel list as you like.

Note: After this operation, other channel’s PR numbers will be changed.

1 Display the INSTALL menu.

MENU INSTALL

❇

2 Choose EDIT/ MANUAL, then press the

MENU/OK button. EDIT menu appears.

EDIT

PR CH/CC 7 CH 09 8 CH 11

■

9 CH 13 10 11 12 13

3 Choose the channel which you want to

change PR number, or delete.

4 Do the following action:

To change the Press the 3 button. Then move PR number it to the PR number you want (MOVE) to use it for the channel.

To delete the Press the yellow button. channel (DELETE)

Finally press the 2 button.

5 Press the MENU/OK button to exit the

menu.

❇ About the basic operations of the menu,

please see the “How to operate menus and menus locations” on page 4.

TV channel presetting

To add in the new channel (INSERT in the EDIT menu)

You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “CH/CC number list” on this page.

1 Display the INSTALL menu.

MENU INSTALL

❇

2 Choose EDIT/ MANUAL, then press the

MENU/OK button. EDIT menu appears.

3 Choose the PR number for which you will

4 Press the green button, then press 5/∞

buttons to choose “CC” or “CH”.

5 Press the number button to enter the

remaining CH/CC number. The TV starts to search the TV channel, and the picture of the TV channel appears. If the TV finds no TV channel, a noisy picture appears.

When a TV channel has already been registered in PR99, using the INSERT function deletes that TV channel.

❇ About the basic operations of the menu,

please see the “How to operate menus and menus locations” on page 4.

CH/CC number

When you want to use the INSERT function by the previous operation, find the CH/CC number corresponding to the channel number of the TV channel from this table.

Channel No. Country

US United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc.. OIRT Eastern Europe, Russia, Vietnam, etc.. AUSTRALIA Australia, etc..

Channel

CH US CCIR OIRT

CH 02 US- 2 E2 R1 AU- 0 CH 03 US- 3 E3 AU- 1 CH 04 US- 4 E4 R2 AU- 2 CH 05 US- 5 E5 R6 AU- 6 CH 06 US- 6 E6 R7 AU- 7 CH 07 US- 7 E7 R8 AU- 8 CH 08 US- 8 E8 R9 AU- 9 CH 09 US- 9 E9 CH 10 US- 10 E10 R10 AU- 10 CH 11 US- 11 E11 R11 AU- 11 CH 12 US- 12 E12 R12 CH 13 US- 13 CH 14 US- 14, W+ 29 CH 15 US- 15, W+ 30 CH 16 US- 16, W+ 31 CH 17 US- 17, W+ 32 CH 18 US- 18, W+ 33 CH 19 US- 19, W+ 34 CH 20 US- 20, W+ 35 CH 21 US- 21, W+ 36 E21 CH 22 US- 22, W+ 37 E22 CH 23 US- 23, W+ 38 E23 CH 24 US- 24, W+ 39 E24 CH 25 US- 25, W+ 40 E25 CH 26 US- 26, W+ 41 E26 CH 27 US- 27, W+ 42 E27 CH 28 US- 28, W+ 43 E28 CH 29 US- 29, W+ 44 E29 CH 30 US- 30, W+ 45 E30 CH 31 US- 31, W+ 46 E31 CH 32 US- 32, W+ 47 E32 CH 33 US- 33, W+ 48 E33 CH 34 US- 34, W+ 49 E34 CH 35 US- 35, W+ 50 E35

CC US CCIR OIRT

CC 01 S- 1 AU- 5 CC 02 S- 2 CC 03 S- 3 CC 04 S- 4 CC 05 S- 5 CC 06 S- 6 AU- 5A CC 07 S- 7 CC 08 S- 8 CC 09 S- 9 CC 10 S- 10 CC 11 S- 11 CC 12 S- 12 CC 13 S- 13 CC 14 A S- 14 CC 15 B S- 15 CC 16 C S- 16 CC 17 D S- 17 CC 18 E S- 18 CC 19 F S- 19 CC 20 G S- 20 CC 21 H S- 21 CC 22 I S- 22 CC 23 J S- 23 CC 24 K S- 24 CC 25 L S- 25 CC 26 M S- 26 CC 27 N S- 27 CC 28 O S- 28 CC 29 P S- 29 CC 30 Q S- 30 CC 31 R S- 31 CC 32 S S- 32 CC 33 T S- 33 CC 34 U S- 34 CC 35 V S- 35 CC 36 W S- 36 CC 37 W+ 1 S- 37

AUSTRALIA

CH US CCIR OIRT

CH 36 US- 36, W+ 51 E36 CH 37 US- 37, W+ 52 E37 CH 38 US- 38, W+ 53 E38 CH 39 US- 39, W+ 54 E39 CH 40 US- 40, W+ 55 E40 CH 41 US- 41, W+ 56 E41 CH 42 US- 42, W+ 57 E42 CH 43 US- 43, W+ 58 E43 CH 44 US- 44, W+ 59 E44 CH 45 US- 45, W+ 60 E45 CH 46 US- 46, W+ 61 E46 CH 47 US- 47, W+ 62 E47 CH 48 US- 48, W+ 63 E48 CH 49 US- 49, W+ 64 E49 CH 50 US- 50, W+ 65 E50 CH 51 US- 51, W+ 66 E51 CH 52 US- 52, W+ 67 E52 CH 53 US- 53, W+ 68 E53 CH 54 US- 54, W+ 69 E54 CH 55 US- 55, W+ 70 E55 CH 56 US- 56, W+ 71 E56 CH 57 US- 57, W+ 72 E57 CH 58 US- 58, W+ 73 E58 CH 59 US- 59, W+ 74 E59 CH 60 US- 60, W+ 75 E60 CH 61 US- 61, W+ 76 E61 CH 62 US- 62, W+ 77 E62 CH 63 US- 63, W+ 78 E63 CH 64 US- 64, W+ 79 E64 CH 65 US- 65, W+ 80 E65 CH 66 US- 66, W+ 81 E66 CH 67 US- 67, W+ 82 E67 CH 68 US- 68, W+ 83 E68 CH 69 US- 69, W+ 84 E69

CC US CCIR OIRT AUSTRALIA

CC 38 W+ 2 S- 38 CC 39 W+ 3 S- 39 CC 40 W+ 4 S- 40 CC 41 W+ 5 S- 41 CC42 W+ 6 CC 43 W+ 7 CC 44 W+ 8 CC 45 W+ 9 CC 46 W+ 10 CC 47 W+ 11 CC 48 W+ 12 CC 49 W+ 13 CC 50 W+ 14 CC 51 W+ 15 CC 52 W+ 16 CC 53 W+ 17 CC 54 W+ 18 CC 55 W+ 19 CC 56 W+ 20 CC 57 W+ 21 CC 58 W+ 22 CC 59 W+ 23 CC 60 W+ 24 CC 61 W+ 25 CC 62 W+ 26 CC 63 W+ 27 CC 64 W+ 28 CC 75 X CC 76 Y R3 CC 77 Z R4 AU- 3 C 78 Z+ 1 R5 CC 79 Z+ 2 AU- 4 CC 95 A- 5 CC 96 A- 4 CC 97 A- 3 CC 98 A- 2 CC 99 A- 1

AUSTRALIA

Additional preparation

The illustrations shown in this section are for AV-21F14 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated.

Before connecting

OUTPUT

VIDEO

AUDIO

Front of the TV

 

 

Camcorder or TV game





VCR (for playing) DVD player

(Composite signals)

VCR (for recording)

• Read the manuals provided with the devices for the proper connection.

• Turn off all the devices including the TV.

• Note that connecting cables are not supplied.

Headphones

Rear of the TV

VIDEO-1

INPUT

Troubleshooting

If a problem occurs when you are using the TV, check the following troubleshooting guide before calling for repair.

No picture, no sound

Snowy picture

Stripes appear on the picture

Double-pictures (ghosting) occur

Poor picture

White and bright still image look as if it were coloured

Top of the image from software products or video tape is distorted

• Deactivate the BLUE BACK function if it is turned on.

• Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 10.

• Check the aerial cable and its connection with the TV.

• Interference occurs caused by other devices such as an amplifier, personal computer, or a hair drier. Move such devices away from your TV.

• Interference occurs caused by signal reflecting from mountains or building. Try to adjust the aerial’s direction or use a better directionality antenna.

• Choose the appropriate colour system. Refer to “COLOUR SYSTEM” on page 8.

• Adjust the COLOUR or BRIGHT setting. Refer to “Adjusting the picture - USER” on page 8.

• Inevitable phenomenon due to the nature of the picture tube. This is not a malfunction.

• This is due to the condition of the video signal whereby the image was not recorded properly. This is not a malfunction.

Cannot operate the remote control

Cannot operate the menus

Cannot operate the front control buttons

TV is turned off suddenly

Colour patches appear at the corner of the screen

Image takes a short period to be displayed

TV may emitted crackling sound

Feel a slight electric shock when touching the TV screen

• The batteries may be exhausted. Replace with new batteries (see page 6).

• Ensure that you are operating the remote less than seven meters from the front of your TV.

• Press TV/VIDEO button to return to TV mode and try operating the menus.

• Deactivate the CHILD LOCK function if it is turned on (see page

12).

• This may due to the AUTO SHUT OFF function is activated. Press the POWER button to turn on the TV.

• This may due to the magnetized device such as a speaker near to your TV. Keep the device apart from your TV. Alternately, you can also use the magnetic- shielded speaker.

• Image required time to stabilize before display. This is not a malfunction.

• This is due to a sudden change in temperature and it is not a malfunction. If the crackling sound is too frequent, request your service technician for inspection.

• This is due to the static electricity of the picture tube and it will not harm the human body. This is not a malfunction.

+ 33 hidden pages

JVC AV-21F24, AV-21L24, AV-21C14, AV-21D14, AV-21E14 User Manual

COLOUR TELEVISION

Contents

GGT0035-001B-H

Safety Instructions

Knowing your TV’s functions

Remote control buttons and basic functions

TV buttons and functions

Setting up your TV

Basic setting for picture

Advance setting for picture

Original features for picture

Basic setting for sound

Advanced setting for sound

Favorite channel and video setting

Customized setting

TV channel presetting

Additional preparation

Troubleshooting