This service manual mainly consists of the following items:
• The items which differ from those for the AV-14AT service manual.
• The initial value for each setting item.
For details other than those described in this manual, please refer to the following service manual.
Reference Service Manual: AV-14AT Service Manual (No. 56085, Oct. 2000)
Note: The page in parentheses shows the one for the AV-14AT service manual (No. 56085, Oct. 2000).
HOW TO IDENTIFY MODEL
While referring to the illustration given below, identify model name on the rating label affixed to the rear cover.
Aerial Input Terminal75Ω Unbalanced
Power InputAC110 ~ 240V, 50/60Hz
Power Consumption70W (Max.) / 47W (Avg.)
Picture TubeVisible size : 34cm measured diagonally
High Voltage22.5kV ± 1.5kV (at zero beam current)
Speaker8cm Round type
Audio Output3W (Monaural)
InputVideo1Vp-p, 75Ω
Audio500mVrms (−4dBs), High impedance
OutputVideo1Vp-p, 75Ω
Audio500mVrms (–4dBs), Low impedance
Headphone JackStereo mini jack (3.5ø)
Remote Control UnitRM-C360-1H (Battery size : AA/R06/UM-3×2)
AV-14ATG
Design & specifications are subject to change without notice.
No. 560873
Page 4
AV-14ATG
SPECIFIC SERVICE INSTRUCTIONS
SETTING OF SYSTEM CONSTANT SET (Page 7)
Table 1
Setting itemSetting contentsSetting value
COLOURTRIPLE
BILINGUAL NO
TUNER MU
ECO SENSOR NO
LANGUAGEE/R/A/F
B/B SOUND ON
LOCK 180
COLOUR AUTO YES
QSS MINT
ALC NO
TEXT RATE 20
AMP TUNER NO
MULTI.TRIPLE PAL
YESNO
MUMA
YESNO
E/R/A/FE/A/FE/AE/F
ONOFF
YES1020...230
250240
YESNO
MINTMQSS
YESNO
10204080
YESNO
USER SETTING VALUES (Page 7)
Table 2
Setting itemSetting valueSetting itemSetting value
SUB POWERONPICTURE MODE (VSM)BRIGHT
CHANNEL POSITION1 POSITIONVNROFF
CHANNEL PRESET
VOLUMEAppropriate sound volumeAUTO SHUTOFFOFF
TV/VIDEOTVBLUE BACKOFF
ON SCREEN DISPLAYPOSITION NUMBER DISPLAYON TIMERPR1 0:00
COLOUR SYSTEMAUTO PALCHILD LOCKOFF
SOUND SYSTEMB / G
Refer to OPERATING
INSTRUCTION
OFF TIMEROFF
LANGUAGEENGLISH
No. 560874
Page 5
SERVICE ADJUSTMENTS
■ Initial Setting Value
■ IF CIRCUIT ADJUSTMENT -- Adjustment of DELAY POINT (Page 15)
AV-14ATG
Setting (Adjustment) Item
DELAY POINT
(AGC TAKE-OVER)
VariableInitial setting
range value
0 ~ 12745
■ V/C (VIDEO/CHROMA) CIRCUIT ADJUSTMENT (Page 15)
[SUB MENU 2. V/C]
Colour system VariableInitial setting value
Setting itemrangePALSECAMNTSC 3.58 NTSC 4.43
1. CUT OFF (R / G / B) −128 ~ +127−50bbb
2. DRIVE (R / B) −64 ~ +63 0bbb
3. BRIGHT −128 ~ +127 0bbb
4. CONT. −64 ~ +63 0bbb
5. COLOUR (P / S / N3 / N4) −64 ~ +63 0bbb
6. TINT (N3 / N4) TV / VIDEO −64 ~ +630 / +50 / 0
7. SECAM BL ADJUST −32 ~ +31 0bbb
8. SHARPTV / VIDEO −32 ~ +31−15 / +5bbb
: Do not adjust.
Adjustment of SUB COLOUR-II (Page 18)
Adjustment partDescription
5. COLOUR
PAL COLOURValue (A) in the figure: Set to +11V (W & G).
SECAM COLOURValue (A) in the figure: Set to +4V (W & G).
NTSC 3.58 COLOURValue (A) in the figure: Set to +7V (W & G).
Adjustment of SUB TINT-II (Page 19)
Adjustment partDescription
6. TINT
NTSC 3.58 TINTValue (B) in the figure: Set to +7V (W & Cy).