JVC AV-14AMG7, AV-21MBMG7, AV-14A17 User Manual
COLOUR TELEVISION
INSTRUCTIONS
Contents
Safety precautions ......................... 2
Connections .................................. 3
Initial settings ................................. 3
PREPARATION FUNCTIONS REFERENCE
AV-21B17
AV-21BMG7
AV-21BMG7B
AV-21BMG7S
AV-21Q17
AV-21QMG7
AV-21QMG7B
AV-21Y17
AV-21YMG7
This illustration shows AV-14UMG7.
The illustrations of AV-14UMG7 is used in this instruction manual for explanation
purpose. Your TV may not look exactly the same as illustrated.
AV-21YMG7B
AV-14A17
AV-14AMG7
AV-14U17
AV-14UMG7
AV-14UMG7B
Remote control buttons
and functions ................................. 4
TV buttons and functions ............... 4
Using the TV’s MENU ....................5
Presetting TV channels ................. 6
Using the timer ..............................7
Playing game ................................. 7
Sound and Colour system in your
country or region ........................... 7
Troubleshooting ............. Back cover
Specifi cations ................ Back cover
GGT0130-001B-H
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
Thank you for buying this JVC colour television.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
• The apparatus shall not be exposed to
dripping or splashing and that no objects
fi lled with liquids, such as vases, shall be
placed on the apparatus.
•
Do not allow objects or liquid into the cabinet
openings.
• Operate only from the power source
indicated on the rear of the TV.
• Avoid damaging the power cord and mains
plug. When unplugging the TV, grasp the
mains plug. Do not pull on the power
cord.
• This TV can be turned on/off power by
connecting/disconnecting the AC plug into
AC outlet. While this TV is being installed,
enough space should be reserved for
connection/disconnecting the AC plug into
AC outlet by hand.
In the event of
a fault, unplug the unit
and call a service technician. Do
not attempt to repair it yourself or
remove the rear cover.
CAUTION
TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF THIS TV.
• Never block or cover the ventilation openings.
• Never install the TV where good ventilation is unattainable.
• When installing this TV, leave spaces for ventilation around the TV of
more than the minimum distances as shown.
• The surface of the TV
screen is easily damaged.
Be very careful with it
when handling the TV.
Should the TV screen
become soiled, wipe it with a soft dry cloth.
Never rub it forcefully. Never use any
cleaner or detergent on it.
• Insert two batteries by
following the and
polarities and inserting
the end fi rst.
• Use AA/R6/UM-3 dry
POWER /
ON TIMER
cell batteries.
• If the remote control
does not work properly, fi t new batteries.
The supplied batteries are for testing, not
regular use.
2
Connections Initial settings
Turn on the TV.
CAUTION
Ensure to turn off all equipments including the TV before connecting the
AC mains plug to the AC outlet.
Connecting to the aerial cable and VCR
* This illustration
shows AV-14UMG7.
VCR (for recording)
TV rear terminals
75-ohm coaxial
cable (not supplied)
VCR
VHF/UHF
outdoor aerial
OR
Connecting to the TV front terminals
* This illustration shows AV-14UMG7.
TV front terminals
Camcorder TV gameHeadphones
1
JVC logo appears.
Select a language.
2
LANGUAGE
FRANÇAIS
: AUTO PROGRAM
OK
: BACK
DISPLAY
: EXIT
MENU
Proceed to AUTO PROGRAM
Note
This Language Menu’s on screen is used for explanation purpose only.
Your TV may not show the same as this on screen.
Search a channel manually or fi ne-tune a channel.
3
MANUAL PROGRAM
PR CH /CC
05 B/G CC 06
06 B/G CH 05
07 B/G CH 08
08 B/G CH 10
09 B/G CH 12
VOLUME-/+ : SEARCH-/+
/ : FINE-/+
DISPLAY : SOUND SYSTEM
To restart Setup Tour after above setup has completed
Select
To perform manual
search and fi ne-tune
(FINE), \ page 6.
or wait 15 seconds to run Setup Tour
Searching for the channels.
AUTO PROGRAM
VH
: MANUAL PROGRAM
OK
to stop or wait until AUTO
PROGRAM fi nishes
or
To complete
Setup Tour
(while the cursor is pointing to PICTURE
MODE and within 3 seconds)
PREPARATION
After all the connections have been made, insert the mains
plug to the AC outlet.
If you press when LANGUAGE is displayed (Step 2), the screen will exit to MENU.
3
Remote control buttons and functions
Select PICTURE MODE (\ page 5)
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
RETURN PLUS
Press and hold
To cancel
Press and hold
PROGRAMMED!
RETURN PLUS
CANCELED!
RETURN function
If you have not set or have canceled the RETURN PLUS
channel, this will return to the previously viewed channel.
Display the programme number or video terminal number.
TV buttons and functions
* This illustration shows AV-14UMG7.
Video and audio input jack
Select Channel
Headphone jack
Display the TV’s MENU,
Exit after fi nish setting
4
Adjust volume level
Turn the TV on from standby and vice versa
Set OFF TIMER (\ page 7)
Select ECO MODE (\ page 5)
Select TV or video input
Operating the menus (\ page 5)
Turn the volume Off / On
Adjust the volume level, Turn off Muting
Remote control
sensor
Select programme number
For two digits programme number
Select Channel
Select the desired channel number.
For Hyper Scan:
PR changes without changing the picture. Once
you stop pressing CHANNEL+ or CHANNEL-
Press and hold
button, picture will change to the desired PR.
POWER lamp - Indicates the TV’s status.
No colour : TV’s main power is being turned off.
Red : TV’s main power is being turned on.
Blink : While the TV is in standby mode, ON
POWER /
ON TIMER
TIMER function is in used. While the
TV is in turn on mode, OFF TIMER
function is in used.
Note: When you turn off the power switch while
TV’s main
power on/off
TV is in standby mode, the power lamp will go
off in 5 -10 seconds. When you operate the TV,
POWER Lamp will blink.
Using the TV’s MENU
Operating the menus
Display MENU
MENU (1 / 3)
PICTURE MODE
PICTURE SETTING
WHITE BALANCE NORMAL
ECO MODE
ON TIMER
OFF TIMER
/ Display function setting.
To return to previous screen
To exit from Menu or
MENU Item
PICTURE MODE USER Change picture settings
VIVID Heightens contrast and sharpness
SOFT Softens contrast and sharpness
PICTURE SETTING
PICTURE SETTING can
CONTRAST Adjust contrast (Lower j Higher)
BRIGHT Adjust brightness
operate when PICTURE
MODE is set to USER
(\ PICTURE MODE)
On screen scale colour
Center position : Yellow
Others position : Green
SHARP Adjust sharpness
COLOUR Adjust colour (Lighter j Deeper)
TINT Adjust colour tint
RESET Reset all items level to center
WHITE BALANCE NORMAL Normal white balance
COOL Bluish white
WARM Reddish white
ECO MODE
Adjust picture contrast
according to room
brightness
OFF Cancel the function
ECO-1 Mild contrast (recommended)
ECO-2 Even contrast
Showing MENU
page 1 of 3
/ Select function, go to
previous/next page
On-screen guide
/ Change setting
Description
(Setting / Adjustment)
(\ PICTURE SETTING)
(Darker j Brighter)
(Softer j Higher)
(Reddish j Greenish)
ON TIMER Turns on the TV from standby mode (\ page 7)
OFF TIMER Turns off the TV to standby mode (\ page 7)
AI VOLUME ON Sets the volume level for all
channels and video inputs
automatically depends on the
strength of signal from the source.
OFF Volume can be adjusted individually
for each channel
CHILD LOCK ON Disable the front buttons of the TV
OFF Cancel the function
BLUE BACK ON Displays a blue screen and mutes
the sound when signal from the
aerial is weak or absent
OFF Cancel the function
VNR
To reduces the picture
noise
AUTO Effect of VNR is automatically
controlled
MIN Effect of VNR becomes minimum
MAX Effect of VNR becomes maximum
OFF Cancel the function
GAME Select a game to play (PUZZLE / TWINS)
(\ page 7)
LANGUAGE Choose your desired on screen display language.
AUTO PROGRAM Automatically registers channels (\ page 6)
MANUAL PROGRAM Manually search channels and fine-tunes
channels (\ page 6)
INSERT / DELETE Add, delete and move registered channels
(\ page 6)
COLOUR SYSTEM Select the appropriate system
In TV mode :
(AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 /
AV-21Y17 : AUTO / PAL / SECAM)
(Other models : AUTO / PAL / SECAM /
NTSC3.58 / NTSC4.43)
In VIDEO mode (All models) :
(AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43)
(\ page 7)
SOUND SYSTEM Select the appropriate system
(AV-14A17 / AV-14U17 / AV-21B17 / AV-21Q17 /
AV-21Y17 :BG / I / DK) (Other models : BG / I /
DK / M) (\ page 7)
5
FUNCTIONS
Loading...