JVC GGT0353-001A-H, 0610GLT-NF-MT User Manual

RM-C2022

LCD

DISPLAY BACK

CH

VOL

MODE

ZOOM

ECO

MENU

TV/VIDEO

RETURN

+

Clear SD

1

3

2

4

65

7

9

8

0

OK

20

5

6

7

8

9

10

12

11

13

19

18

17

16

15

14

KARAOKE

OK

OK

OK

OKOKOK

OK

OK

WIDE LCD PANEL TV INSTRUCTIONS

OK

CH

LT-32A1

ENGLISH

© 2010 Victor Company of Japan, Limited

Safety Precautions

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

Follow this manual regarding setup!•

Connect only to a 110-240 V, 50/60Hz AC outlet. -

Make enough room for inserting and removing the power •
plug!
Place the TV as close to the outlet as possible!•

The main power supply for this TV is controlled by inserting or removing ­the power plug.

Never cut or damage the power cord!•

If the AC plug is not the right shape, or the power cord is not long ­enough, use an appropriate plug adapter or extension cable. (Consult
your retailer)

Unplug the power cord when going out!•

The power buttons on the remote control and the TV unit cannot ­completely turn off the TV. (Make appropriate arrangements for
bedridden people.)

Do not allow the TV to fall!•

Do not rest your elbows on, or allow children to hang from the TV. ­There is a risk that the TV will fall and cause injuries. ­Make use of the hole on the back of the stand to prevent ­the TV from falling easily.

If the TV is damaged or behaving strangely, stop •
using it at once!

Unplug the power cord and contact your retailer. -

Never place anything on the TV!•

Placing liquid, naked fl ames, cloths, paper, etc. on the TV may cause a -
fi re.

Never expose to rain or moisture!•

To prevent fi re or electric shock, never allow -
liquids to enter the unit.

Never insert objects into the cabinet •
openings!

It may cause a fatal electric shock. ­Take care when children are near. -

Hold the TV so as not to scratch the •
screen!

Do not touch the screen when carrying the TV. -

Do not carry the TV on your own!•

In order to prevent accidents, ensure that the TV ­is carried by two or more people.

For more details on installation, usage and safety • ➔ Consult
your retailer.

Care when setting

Power requirements ■

Connect the power cord •
only to a 110-240V, 50/60Hz
AC outlet.

Installation requirements ■

To avoid overheating, •
ensure the unit has ample
room.

* Please see how to set up the TV and connection in GGT0356-001A-H.

Thank you for buying this JVC LCD panel television.

200 mm

50 mm150 mm 150 mm 50 mm

GGT0353-001A-H
0610GLT-NF-MT

Never insert the power cord by wet hand!•

It may cause a fatal electric shock. -

Keep the TV set away from direct sunlight!•

TV set can be damaged. -

Place the TV set in a neat and dry place. Do not place the •
product close to source of steam, heat, moisture or oil.
Because it may cause a fi re hazard or electric shock hazard!
Don’t touch an external metal part of the TV set!•

It may cause an electrocuted. -

For keep a distance from potential ignition •
sources to the components or part in side TV
set, customer should install TV set with a stand
within ± 10 perpendicularly degree.
Never dismantle the rear panel!•

It may cause an electric shock. -

Never obstruct the ventilation holes!•

It may cause overheating or a fi re. -

Handle LCD panel with care!•

Use a soft, dry cloth when cleaning. -

Never try repair the TV yourself!•

If the problem cannot be solved in “Troubleshooting” unplug the power ­cord and contact your retailer.

If a television is not positioned in a suffi ciently stable •
location, it can be potentially hazardous due to falling. Many
injuries, particularly to children, can be avoided by taking
simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the ­television.
Only using furniture that can safely support the television. ­Ensuring the television is not overhanging the edge of the supporting ­furniture.
Not placing the television on tall furniture (for example, cupboards or ­bookcases) without anchoring both the furniture and the television to a
suitable support.
Not standing the television on cloth or other materials placed between ­the television and supporting furniture.
Educating children about the dangers of climbing on furniture to reach ­the television or its controls.

To prevent accidents, fi rmly attach the TV stands to the TV •
shelf before using microphone.
Make sure that the subwoofer is in good condition before •
installing it on the TV.

If the subwoofer has leakage current, it may damage the TV or cause ­electric shock.

If the microphone is installed, •
should be lock it’s cable follow
picture.

To prevent the TV from falling thread the •
belt through the hole on the back of the
stand and secure it to the TV rack.

Hole for belt

Belt

Screw (not provided)

(not provided)

10

Plane

10

RM-C2022

LCD

DISPLAY BACK

CH

VOL

MODE

ZOOM

ECO

MENU

TV/VIDEO

RETURN

+

Clear SD

1

3

2

4

65

7

9

8

0

OK

20

5

6

7

8

9

10

12

11

13

19

18

17

16

15

14

KARAOKE

OK

OK

OK

OKOKOK

OK

OK

OK

CH

Remote control buttons and functions

Adjust Volume

Power On / Off

Panoramic

1

Colour buttons

2

Turn on “Clear SD”

3

Turn on “Zoom”

4

Turn on “Eco Mode”

5

Turn on “Karaoke”

6

Favourite channel setting

7

Display on-screen menu

8

Operate the menu

9

To previous screen

!

Turn on “Sound Meister”

"

VOLUME

12

15

CHANNEL

1

VOLUME

CHANNEL

Microphone

Zoom : Change the aspect ratio

Picture

Zoom

Auto

Regular
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full

Hyper Scan :

1. Select

2. Set

Volume control / Turn off muting

#

[

For button side front will be displayed on-screen menu

When press and hold the button for 3 seconds, •
on-screen menu will be displayed.
To exit, press and hold the button again for •
3 seconds. ]

Function for viewing Teletext

$

To Teletext

%

Change channel / Page / Hyper Scan

&

Channel information

(

Switch between TV / Video input

)

Return Plus / Return function

~

Change channel / page

+

Turn the volume off / on

,

V-Scroll

16:9 Zoom

Move the picture with 3 or 4
while this bar is displayed.

When 720p or 1080i or 1080p signal •
is received, “Full” and “Slim” can be
selected.
In PC mode, “Regular” and “Full” can •
be selected.

Press and hold

. PR changes without changing the picture screen.

Once you release the button, the picture of the selected PR will appear.

Return Plus : Return to the frequently viewed channel.

Return Plus Programmed by select the frequently viewed channel then press and hold

Return Plus Canceled by press and hold

RETURN+

.

Return : Return to the previously viewed channel.

Favourite channel setting.

1. Register the favourite channel

Press and hold

Programmed!

will be displayed.

Insert the batteries•
Use two “AAA/R03” dry cell batteries.
Insert the batteries from the · end,
making sure the · and ª polarities
are correct.

WARNING:

Press number
button (1-4 only)

“AAA/R03”
Batteries

2. Recall the favourite channel

Favourite 1-4 ? Set 1-4 ?

Press

If the favourite channel has not been registed then “ No memory “ will •
be displayed.

WARNING:

Batteries shall not be exposed
to excessive heat such as direct
sunshine, fi re or the like.

To prevent the spread of fi re, keep candles or other open fl ames away from

MENU

(While the cursor is pointing to Picture menu

1

and hold for 3 seconds.)

Select a language.

2

> Language

English

Français

Українська

Select Country Area.

3

Set Up

ไทย

Tiếng Việt
Português
Melayu
Pусский
Castellano

1. Select

2. Set

> Country Area

Area - 1

Area - 2

Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines

this product at all times.

Initial Settings

Turn on the TV.

1

JVC logo appears

Show only when powering on for the fi rst time.•
The power on the unit can also be used.•

• The select the new Country Area after Initial Setting has completed.

-%.5

RETURN+

.

Press number
button (1-4 only)

If this symbol is shown,
it is only valid in the
European Union.

Set Up

1. Select

2. Set

21

OK

OK

OK

OK

OK

Initial Settings (continued)

If you select Country Area to “Area-1” If you select Country Area to “Area-2”

Select the teletext language group.

4

Set Up

> Teletext Language

Group-1

Group-2
Group-3
Group-4
Group-5

Automatically register channels (Auto Program).

5

1. Select

Select Air or Cable.

4

Set Up

> Auto Program

Air

Cable

Searching for the channels (Auto Program)

5

1. Select

2. Set

Set Up

Check what was registered.

6

Set Up

> Edit

PR

01
02

03

04
05
06
07
08
09
10

ID

– – – – – –
– – – – – –

B B C A B C

A B C D E F
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –

CH / CC

CH 02
CH 03

CH 47

CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28

> Auto Program

CH 40

5%

If you want to edit channel, follow Edit •
function in Set Up menu.

Using the TV’s Menu ---> Area - 1

-%.5

Display MENU.

466)$%/

-%.5

or

Exit from Menu. OK Confi rm after setting.

Please see “Menu operation guide” at the bottom of menu on-screen.•

Picture Mode
Backlight Darker <--> Brighter
Contrast Lower <--> Higher
Brightness Darker <--> Brighter
Sharpness Softer <--> Sharper
Colour Lighter <--> Deeper

Picture

Tint Reddish <--> Greenish *Only NTSC
White Balance
Features Finer picture adjustment

Clear SD
Digital VNR Reduces the amout of noise in original

Colour Management
Picture Management
Dynamic Backlight

Colour System Select an appropriate colour system.

Zoom Change the aspect ratio.

Stereo / I■II

Sound Meister Set sound theme to match your listening source.

Bass Compensates low frequencies to widen the

Sound

Treble

Surround Expands the stereo sound naturally.

Balance Left Stronger <--> Right Stronger
Voice Enhancer
Al Volume
Subwoofer Out
Subwoofer Level

Karaoke

Karaoke Chooses to reduce the vocals.

Main Volume Adjusts volume level. (Lower <--> Louder)
Microphone Volume

Select the picture as you like. (Standard / Soft / Bright)

Select the white balance of the picture. (Cool / Mid / Warm)

For clearly picture (Off / Mode-1 / Mode-2)

picture. (Off / On)
For natural - looking pictures. (Off / On)
Fix bright / dark pictures. (Off / On)
Reduces the brightness of the backlight
when the screen is dark. (Off / On)

(Auto / PAL / SECAM / NTSC 3.58 / NTSC

4.43 / PAL-M / PAL-N)

(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)

Select the stereo, mono or bilingual language.
(I / II / O / m / Mono)

(Off / Dynamic / Pure / Living)

frequency band. (Weaker <--> Stronger)
Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)

(Narrower <--> Wider)

Uses sound enhancement technology. (Off / On)
Prevent sudden increase or decrease of sound. (Off / On)
Chooses to connect subwoofer. (Off / On)
Adjusts sound level of your subwoofer.
(Lower <--> Louder)

When Subwoofer Out set to On, you can adjust •
Subwoofer Level.

You can enjoy to reduce the vocals for your own karaoke.

(Off / Mode-1 / Mode-2)

Adjusts volume level of microphone.
(Lower <--> Louder)

Picture Mode

Backlight
Contrast
Brightness
Sharpness
Colour
Tint
White Balance
Features

Picture

Soft

Warm

Set Up

>> Auto Program

CH 40

5%

Check what was registered.

6

Set Up

> Channel Summary

CH / CC

CH 02
CH 03

CH 04

CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11

ID

– – – – – –
– – – – – –

B B C A B C

A B C D E F
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –

Skip

If you want to set undesired channels •

Yes
Yes

to be skiped, follow Channel Summary
function in Set Up menu.

2 / 3 Select Main menu.
(Picture / Sound / Features / Set Up)

5 / ∞ Select sub menu.
2 / 3 Change setting.

When 3 is shown.
3 Display function setting.
5 / ∞ Select function.
2 / 3 Change setting.

On Timer Turns on the TV from standby mode.

Sleep Timer
Channel Guard
Blue Back Display a blue screen and mute the sound when the

Features

PR Select a channel. (01 - 99)
On Timer Set a time. (00:00 - 12:00)

Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Stop children from watching specifi c channels.

signal is weak or absent. (Off / On)

Child Lock Disables the side control buttons of the TV. (Off / On)
Auto Shutoff Set the power to turn off if no TV singnal (RF) is

Favourite Setting

received and no operation is performed for about 15
minutes. (Off / On)

Delete the favourite channel that you registered by

Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Eco Mode Adjust picture contrast to match your room brightness.

(Off / Eco-1 / Eco-2 / Max-Eco)

Auto Program Automatically registers channels.
Edit / Manual Move

Move a channel position by 2 and Adjust
by 3 / 4.

Set Up

ID

Insert

Edit a channel name by

Insert a channel by
Select a CH/CC by 3 / 4.
Enter number by 0-9 buttons.

Delete

Manual

Delete a channel by

Register a new channel by
Beginning channel search by
Channel fi ne tunning by

If the picture or sound is unnatural by

for select a system.

Language Select your desired on screen display language.
Video-2 Setting

Rocket Start TV can turn on quickly. (Off / On)

Teletext
Language

Switch between video and component signal.
(Video / Component)

When Rocket Start is On, power consumption at •
standby mode will more than normal standby mode.

Select Teletext language group.
(Group-1 / Group-2 / Group-3 / Group-4 / Group-5)

HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting

Setting for PC input. (Auto / PC Position / Phase / Pixel)

(Green)

(Yellow)

(Red)

.

.

(Yellow)

(Blue)

.

(Blue)

.

(Red)

and

(Blue)

and

(continued)

.

(Green)

.

.

3

RM-C2022

LCD

DISPLAY BACK

CH

VOL

MODE

ZOOM

ECO

MENU

TV/VIDEO

RETURN

+

Clear SD

1

3

2

4

65

7

9

8

0

OK

20

5

6

7

8

9

10

12

11

13

19

18

17

16

15

14

KARAOKE

OK

OK

OK

OKOKOK

OK

OK

466)$%/

OK

OK

OK

OK

CH

ZOOM

Using the TV’s Menu ---> Area - 2

OK

Picture Mode

Select the picture as you like. (Standard / Soft / Bright)

Backlight Darker <--> Brighter
Picture Lower <--> Higher
Brightness Darker <--> Brighter
Detail Softer <--> Sharper

Picture

Color Lighter <--> Deeper
Tint Reddish <--> Greenish *Only NTSC
White Balance

Select the white balance of the picture. (Cool / Mid / Warm)

Features Finer picture adjustment

Clear SD
Digital VNR Reduces the amout of noise in original

Color Management
Picture Management
Dynamic Backlight

Color System Select an appropriate color system.

Zoom Change the aspect ratio.

MTS Select the stereo and SAP broadcasted programs.

Sound Meister Set sound theme to match your listening source.

Bass

Sound

(Stereo / SAP / Mono)

(Off / Dynamic / Pure / Living)

Treble

Surround Expands the stereo sound naturally.

For clearly picture (Off / Mode-1 / Mode-2)

picture. (Off / On)
For natural - looking pictures. (Off / On)
Fix bright / dark pictures. (Off / On)
Reduces the brightness of the backlight

when the screen is dark. (Off / On)

(Auto / NTSC 3.58 / PAL-M / PAL-N)

(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)

Compensates low frequencies to widen the
frequency band. (Weaker <--> Stronger)

Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)

(Narrower <--> Wider)

Balance Left Stronger <--> Right Stronger
Voice Enhancer
Al Volume
Subwoofer Out
Subwoofer Level

Karaoke

Karaoke Chooses to reduce the vocals.

Main Volume
Microphone Volume

Uses sound enhancement technology. (Off / On)
Prevent sudden increase or decrease of sound. (Off / On)
Chooses to connect subwoofer. (Off / On)
Adjusts sound level of your subwoofer.

(Lower <--> Louder)

When Subwoofer Out set to On, you can adjust •
Subwoofer Level.

You can enjoy to reduce the vocals for your own karaoke.

(Off / Mode-1 / Mode-2)
Adjusts volume level. (Lower <--> Louder)
Adjusts volume level of microphone.

(Lower <--> Louder)

On Timer Turns on the TV from standby mode.

Sleep Timer
Channel Guard

Features

Blue Back Display a blue screen and mute the sound when the

CH Select a channel. (Air : CH02 - CH69 ,
Cable : CC01 - CC125)
On Timer Set a time. (00:00 - 12:00)

Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Stop children from watching specifi c channels.

signal is weak or absent. (Off / On)

Child Lock Disables the side control buttons of the TV. (Off / On)
Auto Shutoff Set the power to turn off if no TV singnal (RF) is

Favorite Setting

received and no operation is performed for about 15
minutes. (Off / On)

Delete the favorite channel that you registered by

(Blue)

Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Eco Mode Adjust picture contrast to match your room brightness.

Auto Program Automatically registers channels.
Channel
Summary

Set Up

(Off / Eco-1 / Eco-2 / Max-Eco)

Skip

Cancel

ID

Skip the channel by

Cancel the skip channel by

Edit a channel name by

Channels are to be skipped cannot be selected by •

(Red)

.

(Yellow)

(Green)

.

.

the CHANNEL - / + button.
The skip can be set to all channels of Air (CH02 - •

Language Select your desired on screen display language.
Video-2 Setting

Rocket Start TV can turn on quickly. (Off / On)

Closed Caption

HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting Setting for PC input.

CH69) and Cable (CC01 - CC125).

Switch between video and component signal.
(Video / Component)

When Rocket Start is On, power consumption at •
standby mode will more than normal standby mode.

Select the desired caption or text channel.

Closed
Caption
Caption Select the desired caption.

Text Select the desired text channel.

Closed Caption is not available for component •
signal.

Select to view close caption or text
information. (Off / CC / Text)

(CC1 / CC2 / CC3 / CC4)

(T1 / T2 / T3 / T4)

(Auto / PC Position / Phase / Pixel)

* Please see CH/CC List in GGT0356-001A-H.

.

Useful functions

Channel Guard :

1 Select “Channel Guard”

0

2 Select a channel and lock it ( : locked)

Features

>> Channel Guard

PR

ID

01

SAT

02

– – – – – –

03

Subwoofer out :

1 Select “Subwoofer Out”

BBC
04
05
06
07
08
09
10

View a locked channel by use the numerical buttons to enter the channel •
number. When

Stereo / I II I II Mono
Sound Meister
Balance
Voice Enhancer
AI Volume

Subwoofer Out On

Subwoofer Level
Karaoke

IEEE

APL

DANY

Sound

Chooses to connect subwoofer. (Off / On)

When Subwoofer Out set to On, you can adjust Subwoofer Level.•
Subwoofer to be used must have a built-in amplifi er.•

Stop children from watching specifi c channels.

Features

> Set ID No.

CH / CC

CH 02

CH 05

CH 47
CH 09
CH 11
CH 07

Off

Off

0 0 0 0

appeare, press “Display” button and enter your “ID No.”

You can enjoy subwoofer sound from Subwoofer out.

O K

O K

1. Select a
channel

1. Select

2. Adjust

3. Finish

1. Select a number

2. To the next column

3. Set

Lock / Release

(Blue)

Karaoke :

You can enjoy to reduce the vocals for your own karaoke.

1 Select “Karaoke”

Sound

Karaoke

Karaoke

Main Volume
Microphone Volume

Karaoke

Off

Chooses to reduce the vocals.

Off : Normal sound of song
Mode-1 : Only sound of music
Mode-2 : To sing, accompanying with sound of song

Karaoke function works only for stereo sound system.•
If using Karaoke disc, users must choose to remove the •
vocals from the player.

Main Volume Adjusts volume level. (Lower <---> Louder)
Microphone Volume Adjusts volume level of microphone.

(Lower <---> Louder)
Micophone Volume is available when plug in microphone.•
Microphone to be used with the “• Karaoke” function of JVC must
be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type;
otherwise, noise will result.

Freeze :

Take snapshots of the screen.

1

Freeze

You cannot save or export the snapshot.•
Freeze function is not available for HDMI, PC and Component signal.•

still picture

1. Select

O K

2. Adjust

3. Finish

Cancel

Press “ OK ” again,
or change the
channel.

RM-C2022

LCD

DISPLAY BACK

CH

VOL

MODE

ZOOM

ECO

MENU

TV/VIDEO

RETURN

+

Clear SD

1

3

2

4

65

7

9

8

0

OK

20

5

6

7

8

9

10

12

11

13

19

18

17

16

15

14

KARAOKE

OK

OK

OK

OKOKOK

OK

OK

466)$%/

OK

OK

CH

ZOOM

Useful functions (continued)

OK

Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.

Off : Deactivates the function

Eco-1 : Picture is darkened for the 1st level.

Eco-2 : Picture is darkened for the 2nd level (more than the 1st level).

Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house

works at the same time).

- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.

- When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.

- After unplugging the TV or press “Power off” button, this function will be reset back to “Off”

Viewing Teletext

You can watch the Teletext broadcast channel with Text Functions.

Watching Video or DVDs

1 Select the input source.

1 TV mode <--> TEXT mode

2 Select a Teletext page by press number button (0-9).

Move up or down a page by CHANNEL +/-. •

List Mode : Book mark your favourite page.

MODE

(Red) (Green) (Yellow) (Blue)

for select to save
Press number button
for enter the number
of page.

save

• Recall your favourite page by press the colour button.

Hold

: Hold the current page.

• Cancel by press this button again.

Reveal

: Display hidden information.

• example : answer to a quiz, etc

Size

: Double the size of the displayed text.

Index : Returns to page “100” or a previously designated page.

Cancel

:

Leave the current page open, while you switch to watch TV.

• Useful when running a page search.

Sub-page

: Display the number of Sub-page.

• Cancel by press this button again.

Operate the connected device and play video.•

2 Select “Set Up” Menu.

HDMI setting : Setting for HDMI input.

Size : Auto / 1 / 2

Audio : Auto / Digital / Analogue

PC Setting : Setting for PC input.

Auto :

PC Position :

Phase : Sets the focus of screen.

Pixel : Adjusts the horizontal feature of screen.

Troubleshooting

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

Severe noise or snow

Check the aerial cable and TV connections .
Check the direction of the aerial.
Check the aerial or its cable damaged or not.

Patterns, stripes or noise

Interference caused by devices such as an amplifi er, personal computer,
or a hair drier, Move it away from TV.

Ghosting (Doubling of images)

Interference occurs caused by signal refl ection from mountains or building.
Try to adjust the aerial’s direction or use another antenna.

Cannot turn it on

Ensure the power cord is connected to the AC outlet correctly.

Cannot operate the remote control.

The batteries may be exhausted. Replace with new batteries.
Ensure that you are operation the remote control at less than 7 meters
from the front of your TV.

Remote control stops working

Unplug TV, several minutes later plug it in again.

Side control buttons do not work

Switch “Child Lock” to “Off”.

Aspect ratio changed unintentionally

Press “

PC screen alignment is off

Adjust the “PC Position” in “PC Setting” of Set Up menu.

Blue screen appears on the screen

Switch “Blue Back” to “Off”.

Strange picture when using an external device

If the top of the image is distorted, check the video signal quality itself.
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the output setting of
the external device to 625i (interlace-scanning).

” button to return to your settings.

Poor picture quality

Unnatural colour >> Adjust “Colour” and “Backlight”.
Check “Colour System”. If “Auto” is selected.
Select the specifi c colour system manually.

Poor sound

Adjust the “Bass” and “Treble”.
If receiving a poor signal in “Stereo/I
Adjust the channel reception using “Manual”.

For HDMI signal, wrong screen size.

Switch “Size” in “HDMI Setting” to “1” or “2”.

For HDMI signal, green and distorted screen

Wait a little for the signal to stabilize when switching the signal format for
an “HDMI” device.

For HDMI signal, No picture / No sound

Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or
“Analogue” or “Auto” for DVI devices.

Some functions do not work.

It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.

Black or white dots appear on the screen.

LCD panels use fi ne dots (“pixels”) to display images. While more than

99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.

No picture, No sound

Some input do not output from OUTPUT terminal.

Subwoofer, No sound

May be signal source is not low frequency bass signal.
Check subwoofer cable connected correctly.

Feedback sound symptoms

Keep the microphone away from the TV’s speakers.

Echo

Lower the sound level in “Microphone Volume” in order to prevent the echo.

AV Select

0 01

1 Video-1
2 Video-2
3 HDMI
4 PC

1. Select

2. Set

If wrong screen size appears in 480p (525p),
change to “1” or “2”.

If no sound, change to “ Analogue “ or “ Digital”.

Automatic adjust by 2.

Adjust screen position by 3 / 4.

And set by

.

■

II” switch to “Mono”.

OK

OK

OK

OK

OK

OK

Technical information

Sound and Colour system in your country or region

Area Country or Region

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore, Thailand,

Asia,
Middle
East

Europe

Oceania

Africa

South
America

India, etc.
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM
Philippines, Taiwan, Myanmar, etc. M NTSC
Russia, etc.
Czech Republic, Poland, etc.

UK, etc. I
Australia, New Zealand, etc. B/G PAL
Republic of South Africa, etc. I
Nigeria, etc.
Egypt, Morocco, etc. SECAM
Agentina, Paraguay, Uruguay
Brazil
Chile, Peru, Bolivia, Colombia, Venezuela,
Ecuador, etc.

System System

B/G

PAL

SECAM

D/K

PALGermany, Holland, Belgium, etc. B/G

PAL

B/G

N

PAL

M

M NTSC

PC Signals that can be displayed

If the signal doesn’t appear, check that the vertical frequency on the PC is •
set to “60Hz”.

Resolution 640 x 480 (VGA) / 1024 x 768 (XGA)

Vertical frequency 60.0

* Machintosh* computers are not supported.
(Machintosh is a registered trademark of Apple Computer, Inc.)

What is “Clear SD”

LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear SD
mode resolves disadvantage for better picture quality.

No use “Clear SD” Use “Clear SD”

Connect “DVI” devices

Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
INPUT VIDEO-2.

• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.

Language group for Teletext

Group Languages

Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,

Portuguese, Greek, Swedish, Finnish

Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,

German, French

Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,

Serbian, Croatian, Slovenian, Czech, Slovak, English, German

Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish,

Portuguese, Swedish, Finnish

Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish,

Finnish

If the characters are unreadable. • ➡ Select different Teletext language
group.

Specifi cation

Broadcasting systems

Colour systems

Channels and
frequencies

Sound-multiplex
systems
Teletext systems FLOF (Fastext), WST (World System Teletext)
Power requirements AC 110 V - 240 V, 50/60Hz
Audio output
(Rated power output)
Speakers (4 cm x 16 cm) x 2
Power consumption
[standby]
[“Rocket Start” mode
standby]
Screen size
(visible area size
measured diagonally)
Dimensions
(W x H x D: mm)
[without stand]
Weights
[without stand]

Accessories

Area-1 B / G / I / D / K / M / N
Area-2 M / N
Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43 /

PAL-M / PAL-N

Area-2 NTSC 3.58 / PAL-M / PAL-N

VHF low channel (VL) = 46.25 to 140.25 MHz

Area-1

VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
VHF low channel (VL) = 55.25 to 127.25 MHz

Area-2

VHF high channel (VH) = 133.25 to 361.25 MHz

UHF channel (U) = 367.25 to 801.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
NICAM (I / B / G / D / K ), A2 (B / G / D / K)
MTS (Multi-channel Television Sound)

6 W + 6 W

105 W

[0.7 W]

[16 W]

80 cm

791.8 x 571.7 x 203.5

[791.8 x 520.5 x 103.9]

15 kg

Power cord x 1
Remote control unit : RM-C2022 x 1
AAA/R03 dry cell battery x 2
Screw x 8

[12 kg]

Terminals / ConnectorsMain unit

Terminal name Terminal type Signal type (IN)

VIDEO-1

VIDEO-2

Input
terminals

HDMI

PC INPUT
HDMI Analog /
DVI Analog / PC
Audio

Microphone

HDMI Analog / DVI Analog / PC Audio use terminal common with •
VIDEO-2.
We may change the design and specifi cations without notice.•
HDMI, the HDMI Logo, and High-Defi nition Multimedia Interface are •
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

RCA connectors x 3
RCA connectors x 5

HDMI connector x 1

D-SUB (15 pins) x 1

RCA connectors x 2

mini-jack x 1

(3.5 mm in

diameter)

Composite video, Audio L/R
Composite video, Analogue
component 480i (525i) / 576i (625i),
Progressive : 480p (525p) / 576p
(625p),
HD : 720p (750p) / 1080i (1125i) /
1080p (1125p)
Audio L/R
HDMI 480i (525i) / 480p (525p) /
576i (625i) / 576p (625p) / 720p
(750p) / 1080i (1125i) / 1080p
(1125p)
Analogue PC signal

Audio L / R

Microphone input

654