Just Mobile SH-08 User Manual

Bluetooth Stereo Headset | User Manual
Bluetooth Stereo Headset
User Manual
Article Number: SH-08
All specifications are subject to changes without further notice - 1 -
Bluetooth Stereo Headset | User Manual
Introduction----------------------------------------------------------------------------------------3 Diagram--------------------------------------------------------------------------------------------3 Wearing Your Headset--------------------------------------------------------------------------4 Charging Your Headset----------------------------- -------------------------------------5 To Charge Your Bluetooth Headset----------------------------------------------------------5 Pairing With Bluetooth Mobile Phone-------------------------------------------------------5 Paring Bluetooth Stereo Headset to Mobile Phone--------------------------------------5 Powering Up---------------------------------------------------------------------------------------6 Using the Call Functions of Bluetooth Stereo Headset---------------------------------7 Listening To Stereo Audio From Bluetooth A2DP Enabled Mobile Phones/ Audio Devices---------------------------------------------------------------------------------------------8 Adjusting The Volume---------------------------------------------------------------------------9 Connection Link/ Between Bluetooth Stereo Headset And Mobile Phone---------9 Master Reset------------------------------------------------------------------------------------10 Care and Maintenance------------------------------------------------------------------------10 Safety Information------------------------------------------------------------------------------11 Product Specifications------------------------------------------------------------------------12 Certification and Safety Approvals/General Information------------------------------13 Care & Maintenance---------------------------------------------------------------------------15 Troubleshooting---------------------------------------------------------------------------------16 Caution--------------------------------------------------------------------------------------------17
All specifications are subject to changes without further notice - 2 -
Bluetooth Stereo Headset | User Manual
1. Introduction
The Bluetooth Stereo works with all Bluetooth enabled compatible phone or music device that supports Advanced Audio Distribution Profile (A2DP) and Audio Video Remote Control Profile (AVRCP). Listening to music, answering calls, adjusting volume, and track controls are easily accessible on the buttons of the headset-the ideal solution for integrating wireless mobile music and calls.
2. Diagram
All specifications are subject to changes without further notice - 3 -
Bluetooth Stereo Headset | User Manual
3. Wearing Your Headset
All specifications are subject to changes without further notice - 4 -
Bluetooth Stereo Headset | User Manual
4. Charging Your Bluetooth Stereo Headset
Make sure that your Stereo Headset is fully charged before using it. Use only the charger provided do not use chargers from any other devices as this might damage the device. A full charge is approximately 2 hours.
5. To Charge Your Bluetooth Headset
1. Use the charger to charge from a charging outlet (or from your laptop/ PC’s USB Port if the optional USB Charging Cable is provided).
2. When the LED light indication is red, the headset is charging.
3. The LED light indication goes off when the device is fully charged.
6. Pairing With Bluetooth Mobile Phone
Paring is the process of connecting your headset with your mobile phone. Before using the headset with your mobile phone, you must pair both devices. If you wish to use your headset with a different mobile phone, you must reinstate the pairing process with your intended Bluetooth mobile phone.
7. Pairing Bluetooth Stereo Headset to Mobile Phone
1. Switch to pairing mode by holding onto the MFB button (approximately 6 seconds) till both Blue/Red LED lights appear.
2. The LED lights will blink simultaneously in pairing mode.
All specifications are subject to changes without further notice - 5 -
Bluetooth Stereo Headset | User Manual
3. Turn on the mobile phone and place it within 10 meters to the headset.
4. Initiate the mobile discovery feature on your mobile phone. Refer to your mobile phone’s user guide on pairing.
5. Enter the default pin code “0000”, when prompted by your mobile phone system for the pin code.
6. The blue LED blinks at a regular interval when both devices are successfully paired.
8. Powering Up
To turn ON the Bluetooth Stereo Headset
Press and hold the “MFB” button for four seconds and the flashing Blue LED light indicator comes on.
Note:
Do not hold the button down for more than 6 seconds when turning the headset on or else it may switch to its pairing mode. If this happens, turn off the headset and repeat the process for turning the headset on.
To turn OFF the Bluetooth Stereo Headset
Press and hold the “MFB” button until the LED light indication goes off.
All specifications are subject to changes without further notice - 6 -
Bluetooth Stereo Headset | User Manual
9. Using the Call Functions of Bluetooth Stereo Headset
Making calls from your mobile phone
Dial directly from your mobile hone. The call is automatically connected to your headset.
Marking calls using voice dialing
(Dependent on mobile phone support) Press the “MFB” button once and call out the name of the person for the call to be placed.
Receiving Calls
You must configure your mobile phone to answer calls directly on your headset. Refer to your mobile phone user guide for instructions for initiating this feature. When your mobile phone rings, press the “MFB” button on the headset to connect the call.
Ending Calls
When you have finished your call, press the “MFB” button on the headset to disconnect the call.
All specifications are subject to changes without further notice - 7 -
Bluetooth Stereo Headset | User Manual
Rejecting Calls
Hold onto the “MFB” button for 3 seconds to reject an incoming call.
Redial Last Outgoing Call
Press the MFB Button twice, and the last outgoing call will be placed.
Transfering calls between Bluetooth Stereo Headset and Mobile Phone
Headset to Mobile Phone-During a call, simply press and hold either “V+” or “V-“ buttons for 3 seconds and the call is routed to your mobile phone. Mobile Photo to Headset-Press the “MFB” button once and the call is routed back to your mobile phone.
10. Listening To Stereo Audio From Bluetooth A2DP Enabled Mobile Phones/ Audio Devices
Your Bluetooth Stereo Headset is capable of high fidelity stereo playback on A2DP enabled Mobile Phones/Audio Devices. Please refer to your Mobile Phone/Audio Device User Guide for more information.
Start Audio Playback
Ensure that your headset is connected in Advanced Audio profile. Press “MFB” button once to play. To pause, simply press “MFB” button once.
All specifications are subject to changes without further notice - 8 -
Bluetooth Stereo Headset | User Manual
Forward/ Backward Track
Toggle between the “ ” and “ ” button-until you have reached the desired track.
Answering A Call When Playing Music
Press the “MFB” button and the call will be connected. Audio playback is put on mute when there are incoming calls from the active connection. The audio playback resumes as soon as the call is terminated. (Dependent on your device supporting this feature)
11. Adjusting The Volume
Press the “V+” button to increase volume or press the “V-” button to decrease the volume. Repeat this procedure until you have reached the desired level.
12. Connection Link/Between Bluetooth Stereo Headset And Mobile Phone
Your mobile phone will always indicate a headset icon whenever your headset is paired. If the icon is not present, a reconnection can be established by manually
selecting the headset from your mobile phone’s Bluetooth menu. If your headset is set as an authorized Bluetooth device on your mobile phone, an automatic reconnection can be established by pressing the headset’s “MFB” button once.
All specifications are subject to changes without further notice - 9 -
Bluetooth Stereo Headset | User Manual
13. Master Reset
To restore your headset to its original settings, press and hold both “V+” and “V-” for approximately 10 seconds until both Blue/Red lights appear. Press and hold both “V+” and “V-” for another 3 seconds. The process is complete when the headset turns itself off.
14. Care and Maintenance Headset:
(1) Consider turning your headset off before placing it in your pocket or bag. If the “MFB” is accidentally depressed, your mobile handset may place an unintended call. (2) Do not expose the headset to liquid, moisture or humidity, as it is not waterproof. (3) Do not use abrasive cleaning solvents to clean the headset. (4) Do not place the headset in high temperature, as it will result in an explosion. (5) Do not expose the headset to contact with sharp objects as this will cause
scratching and damage. (6) Do not stick anything inside the headset as this may damage internal components.
All specifications are subject to changes without further notice - 10 -
Bluetooth Stereo Headset | User Manual
(7) Do not attempt to disassemble the headset, as it does not contain serviceable components.
15. Safety Information
(1) Check local laws regarding use of a mobile handset and headset while driving. If you use the headset while diving, ensure your attention and focus remains on your responsibility of driving safety. (2) Never allow children to play with the headset. Small parts may be a choking hazard. (3) Observe all signs that require an electrical device or RF radio product to be switched off in the designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres. (4) Turn off your headset prior to boarding an aircraft. Do not use your headset in an aircraft. (5) Never mount or store your headset over any air bag deployment area serious injury may result when an air bag deploys. (6) Do not open or mutilate the built-in battery.
All specifications are subject to changes without further notice - 11 -
Bluetooth Stereo Headset | User Manual
16. Product Specifications
Bluetooth compliance:-------------------------------------Bluetooth v1.2 Supports profiles:-------------------------------------------HSP, HFP, A2DP and AVRCP Profiles Output power:------------------------------------------------Class 2 device Operating range:---------------------------------------------Up to 10m Operating frequency:----------------------------------------2.402GHZ~2.480GHZ Support multiple paired Device:--------------------------Up to 8 Bluetooth devices can be paired Charger type:--------------------------------------------------5.0V~5.5V (type 300mA) Charging time:-------------------------------------------------2 hours Standby time:--------------------------------------------------Up to 200 hours* Talk time/ Play time:-----------------------------------------Up to 8 hours* Audio streaming format:------------------------------------SBC Max 200kbps,
48.000KHZ
Audio frequency range:-------------------------------------20Hz~20,000HZ
* Talk Time and Standby Time very depending on phone models, Bluetooth receiving mode and networks.
All specifications are subject to changes without further notice - 12 -
Bluetooth Stereo Headset | User Manual
17. Certification and Safety Approvals/General Infor mation
17.1 The device is CEFCC and BQB approved.
17.2 Federal Communication Commission(FCC) Statement
17.2.1 Rule15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
17.2.2 Rule15.105 found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
All specifications are subject to changes without further notice - 13 -
which can be determined by turning the equipment off and
b
This equipment has been tested and
Bluetooth Stereo Headset | User Manual
on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
17.3 European Union Directives Conformance Statement
17.4 Bluetooth is a trade mark owned by Bluetooth SIG, Inc.
All specifications are subject to changes without further notice - 14 -
technician for help.
We, Mobis Technology Ltd. declares that this product: Bluetooth portable speaker with hands free function is conformity with the appropriate standards EN300328, EN301489-1, EN301489-17, EN60950, EN50371. In accordance with the council directive 1999/5/EC.
Bluetooth Stereo Headset | User Manual
18. Care & Maintenance
18.1 Do not expose the headset to liquid, moisture or humidity as it is not waterproof.
18.2 Do not use the headset outdoors when it is raining.
18.3 Do not use the abrasive cleaners to clean the headset as they may damage the finish.
18.4 Do not expose the headset to extremely high or low temperatures.
18.5 Keep the headset away from direct sunlight.
18.6 Do not bring your headset into contact with any sharp objects as this will cause scratches and damage.
18.7 Do not attempt to disassemble the headset as it does not contain serviceable components.
18.8 When you store the headset away, please do not stack any heavy objects on top of it.
All specifications are subject to changes without further notice - 15 -
Bluetooth Stereo Headset | User Manual
19. Troubleshooting
If you are experiencing problems with the headset, please try the following:
19.1 Check if the battery of the headset is leer.
19.2 Check the connection of the headphone to ensure that it is securely plugged into the headset.
19.3 Before pairing, turn off the headset first and then turn it on again according to the instructions.
19.4 Check the LED indicator to ensure the headset is turned on.
19.5 Ensure the headset is paired with your mobile handset or a Portable Media Player when its Bluetooth function is activated.
19.6 Press the + switch on the headset to turn the volume up to a desired level.
19.7 Ensure the headset, or the Portable Media, is within a maximum of 10 meters of your mobile handset and audio player and there are no obstructions, such as walls or other electronic devices in between.
All specifications are subject to changes without further notice - 16 -
Bluetooth Stereo Headset | User Manual
20. Caution
20.1 Important information regarding safe and efficient operation. Read this information before using the product. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
20.2 Operation is subject to the following two conditions:
a. this device may not cause harmful interference, and b. this device must accept any interference received,
including interference that may cause undesired
20.3 FCC RF Radiation Exposure Statement
All specifications are subject to changes without further notice - 17 -
operation of the device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operation instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter.
Bluetooth Stereo Headset | User Manual
©2008 by Mobis Technology Ltd. All ri ghts reserved. No part of this manual may be reproduced, copied or translated in any form or by any means without prior written consent from Mobis Technology Ltd. The content of this manual is subject to change without prior notice. Mobis Technology Ltd. is not liable for any damages resulting from changes to this manual. However, updates to this documentation can be obtained from the following website: http://www.just-mobileonline.com Just Mobile® is a trademark of Mobis Technology Ltd. All other brand names used in this document are registered trademarks of their respective companies
FCC: This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1) this device ma y not cause harmful interference, and 2) this device mus t accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party
All specifications are subject to changes without further notice - 18 -
Loading...