Just Mobile Bluetooth Stereo Speaker User Manual

Bluetooth Stereo Speaker

User Manual

Article Number: PK-07

www.just-mobileonline.com

All specifications are subject to changes without further notice

Bluetooth Stereo Speaker | User Manual

1. Before you use this device, please make sure that you:

1.1 Fully charge the device for at least 3 hours before you use it the first time.
Afterward it takes approximate 2 hours to fully recharge power. (Please refer to

2.1 showed below for details.)

1.2 Pair the speakers with a Bluetooth mobile handset or other Bluetooth devices
before you making calls. The Bluetooth audio connection between the speakers
and your phone can be established by setting up a paired link. (Please refer to

2.2 showed below for details.)

Product Outlook:

2. Prepare to use the product

2.1 Power Supply and Charging:
a. As soon as power jack have been connected, charging the device can be

proceeded under “NO” or “OFF” condition.
b. The battery must be charged with the appropriate charger.
c. While charging, the amber indicator will stay on and the green indicator will

remained to instead as soon as it is completed. It takes 2 hours to re-charge

every time. (It takes 3 hours to fully charge power at the very first time)

2.2 Pairing and establish a connection:
Please make sure you have paired the product with Bluetooth AV sources before
you start to use. Kindly follow the pairing procedure shows hereunder:

a. Turn your Bluetooth stereo headphone on by press and hold the

button till indication blinks rapidly. At this moment, the product is in the
pairing mode.

b. To activate Bluetooth devices searching from your Bluetooth AV sources by

following their original instruction. Please choose the device name and enter
the pass key

c. The speaker supports two audio connections. Please select

HEADSET/HANDSFREE profile if you like to connect to the mobile phone.
Or A2DP/AVRCP profile for stereo sound effect to your audio sourcing.

「「「「

1234

」」」」

to establish a pairing connection.

Note: If the pairing can not be established within 60 seconds, the blue
indicator turns to regular blinking once every 2 second automatically. A
re-pairing procedure is needed. Please repeat pairing procedure listed
above.

「 」

All specifications are subject to changes without further notice

Bluetooth Stereo Speaker | User Manual

2.3 Audio Streaming via Bluetooth:

a. To play music via a Bluetooth AV Transmitter, please make sure the

Bluetooth Wireless Speaker has been connected with the transmitter, blue
indicator will be blinked rapidly 2 times per second.

Note: The device did not support “remote control” function when
connecting with a Bluetooth AV Transmitter; button will act as
“mute” function.

b. To play music via a Bluetooth USB Dongle, please complete AV pairing and

then activate intended audio player interface afterward, the music will be
transmitted to the speaker automatically.

Note: The Bluetooth USB Dongle should support AVRCP profile to
activate “remote control” function.

2.4 Cellphone Operation:

a. Check the user guide of your mobile phone, find the Bluetooth Connectivity

section and follow the instruction to complete pairing with the speaker.

b. If your cellphone support only Hands Free profile, please activate connection

from the cellphone. (Please refer to your mobile phone’s manual for operation
details)

c. Cellphone will always be the top priority, since incoming/outgoing calls have

been progressed, it interrupts actively and the on-going music will be muted.
As soon as the call is hung up, the music rebound afterward.

2.5 Connecting Audio players directly by 3.5mm AV cable:

a. Equipped a rear line-in jack to directly connect to audio sources; for instance;

MP3 player, Discman, laptop or other audio players. Please disconnect
Bluetooth Connection with audio sources firstly. Simply plug the 3.5mm AV
cable into the line-in jack and the other end to audio sources. All functional
buttons on the device will be disable as soon as line-in jack has been
connected, please operate function from the audio sources directly.

Note: Cellphone will always be the top priority, since incoming/outgoing
calls have been progressed, it interrupts actively and the on-going music
will be muted. As soon as the call is hung up, the music rebound
afterward.

2.6 Use with an External Microphone (Optional)：

Equipped a Mic-in jack for external microphone, simply plug the connector into the jack
and turn the Mic on. Please adjust microphone tube and position according to locality to
increase sound sensitivity.

2.7 Pin code

：

「「「「

1234

」」」」

All specifications are subject to changes without further notice