Just Manufacturing SB-124, SB-130, SB-136, SB-142, SB-148 User Manual
...
COMMERCIAL GROUP
WATER LEVEL 12
OPENING FOR
J-35 DRAIN
( ) DIA. HOLES
AND ADJUSTABLE BULLET FEET.
TUBULAR LEGS W/ANGLE GUSSETS
(4) 1 5/8 O.D. STAI NLESS STEEL
1236
12
24
27
1 1/2
R1 1/2
A
B
1 1/2 1 1/2
5
SB-100-SERIES
ONE COMPARTMENT
SQUARE CORNER -NO DRAINBOARD
MODEL NO. A B
SB-124 24 27
SB-130 30 33
SB-136 36 39
SB-142 42 45
SB-148 48 51
SB-154 54 57
SB-160 60 63
SB-166 66 69
SB-172 72 75
CUSTOM SIZE
Models listed will be fabricated based on the de-
tail shown here. Standard depth is 12", standard
backsplash height is 12", for other sizes, specify
requirements. Custom size units will be based
on the drawing shown, modifi ed as required.
SUBMITTAL DATA
To be specifi ed :
n Faucet hole punching:
q (1) Hole Centered
SPECIFICATION
Constructed of 14 gauge type 304, 18-8 stainless steel. Interior surfaces polished
with a non-porous Hand-Blended Just Finish. Exposed exterior surfaces to have
a brush fi nish. Supported on (4) 1-5/8" O.D. stainless steel tubular legs with angle
gussets and adjustable bullet feet. Drain punch #35 centered for Just J-35 unless
otherwise specifi ed.
FUNCTIONAL DESIGN, QUALITY, AND SPECIFICATIONS LISTED DESCRIBE THE JUST STANDARD OF QUALITY. WHEN MAKING COMPARISONS WITH OTH ER OFFERINGS, INSIST ON
THE JUST QUALITY OF CONSTRUCTION. FOR ADDITIONAL INFORMATION REGARDING THE COMPLETE LINE OF JUST SINKS, FAU CETS AND DRAINS, VISIT OUR WEB SITE AT www.
justmfg.com
Job Name
Customer
Architect/Engineer
PH: 847-678-5150 . FAX: 847-678-6817 . E-MAIL: custserv@justmfg.com . www.justmfg.com
q (2) Holes on 8" centers
q (3) Holes on 4 "centers
q Alternate Punching:
Faucet Model:
Punching required:
APPROVED FOR MANUFACTURING
MODEL NO. QTY.
COMPANY
TITLE DATE
SIGNATURE
9233 KING STREET . FRANKLIN PARK . ILLINOIS . 60131-2111JUST MANUFACTURING COMPANY
Standard
Depth - 12"(Water level 12")
Backsplash height - 12"
Alternate sizing
q8" backsplash / 14" depth
q backsplash
q depth
REVISED-4/2007
6-13
Loading...