Just Manufacturing DL-1625-A-GR, DL-17537-A-GR, DL-1829-A-GR, DL-1925-A-GR, DL-1933-A-GR User Manual
...
DL - SERIES - A - 18 GA.
DOUBLE BOWL
STYLIST GROUP
SPECIFICATION
Seamless die-drawn construction of type 304, 18-8 stainless steel. Interior and
top surfaces polished to a non-porous Hand-Blended Just Finish with highlighted bowl rim. Fully coated underside insulates for sound, and absorbs
condensation. Straight-sided compartment with 1
greater capacity. Self-rimming top mount Grip-Rim Plus with 300 series stainless steel mounting channels. Conforms to ASME/ANSI A112.19.3M. Drain
punch #35 centered for Just J-35 unless otherwise specified.
TYPE 316 STAINLESS STEEL(check if applicable)
AVAILABLE
ADA COMPLIANT
Most 18 gauge units are available in depths 4 1/2" to 6 1/2" to
accommodate installation compliant with "ADA" requirements.
Refer to the Drop-In ADA section of your standard Just binder
for detailed information.
3
/4" radius corners provides
SUBMITTAL DATA
SPACE SAVER - LEDGE TYPE
T
o be specified :
Faucet hole punching:
(1) Hole Centered
(2) Holes on 4" centers
(3) Holes on 4 "centers(illustrated)
(4) Holes on 4" centers
Alternate Punching:
Faucet Model:
Punching required:
MODE L NO. A B C D E F CUTOUT*
DL-1625-A-GR 16 25 10 10 4-1/2 2 15-1/4 x 24-1/4
DL-17537-A-GR 17-1/2 37 11-1/ 2 16 4-1/2 2 16-3/4 x 36-1/4
DL-1829-A-GR 18 29 12 12 4-1/2 2 17-1/4 x 28-1/4
DL-1925-A-GR 19 25 14 10 3-1/2 1-3/4 18-1/ 4 x 24-1/4
DL-1933-A-GR** 19 33 14 14 3-1/ 2 1-3/4 18-1/4 x 32-1/ 4
DL-2025-A-GR 20 25 14 10 4-1/2 2 19-1/4 x 24-1/4
DL-2037-A-GR 20 37 14 16 4-1/2 2 19-1/4 x 36-1/4
DL-2128-A-GR 21 28 16 11-1/2 3-1/2 1-3/4 20-1/ 4 x 27-1/4
DL-2228-A-GR 22 28 16 11-1/2 4-1/2 2 21-1/4 x 27-1/4
* Cutout dimensions shown (Front-to-Back) x (Left-to-Right) - Corners of cutout
may be square or up to 1/2" radius.
** This model has 1 1/8 center partition and 1 15/16 end flanges.
FUNCTIONAL DESIGN, QUALITY, AND SPECIFICATIONS LISTED DESCRIBE THE JUST STANDARD
OF QUALITY. WHEN MAKING COMPARISONS WITH OTHER OFFERINGS, INSIST ON THE JUST QUALITY OF CONSTRUCTION. FOR ADDITIONAL INFORMATION REGARDING THE COMPLETE LINE OF
JUST SINKS, FAUCETS AND DRAINS, VISIT OUR WEB SITE AT www.justmfg.com
#35 DRAIN OPENING
Job Name
Customer
Architect/Engineer
APPROVED FOR MANUFACTURING
MODEL NO. QTY.
COMPANY
TITLE DATE
SIGNATURE
9233 KING STREET . FRANKLIN P ARK . ILLINOIS . 60131-2111JUST MANUFACTURING COMP ANY
PH: 847-678-5150 . FAX: 847-678-6817 . E-MAIL: custserv@justmfg.com . www.justmfg.com
REVISED-5/2004
1-49
Loading...