Justin JS-180-2600 User Manual
BEFORE INSTALLING AND USING THE PRODUCT,
PLEASE READ THE INSTRUCTIONS THOROUGHLY,
AND RETAIN THEM FOR FUTURE REFERENCE.
PRODUCT OVERVIEW
1. Micro USB Output Port
2. Power Button / Capacity Indicator
3. LED Indicators
4. USB Charging Port
5. Lightning Connector Output Port
Included: (1x) Power Stick and (1x) USB Extension Cable
To ensure safe operation, check your device’s
compatibility with Power Stick specifications prior to use
2,600mAh Power Stick
With Built-In Lightning, Micro USB,
and USB Connectors
Model:
JS-180-2600
USER MANUAL
by
BEFORE INSTALLING AND USING THE PRODUCT,
PLEASE READ THE INSTRUCTIONS THOROUGHLY,
AND RETAIN THEM FOR FUTURE REFERENCE.
PRODUCT OVERVIEW
1. Micro USB Output Port
2. Power Button / Capacity Indicator
3. LED Indicators
4. USB Charging Port
5. Lightning Connector Output Port
Included: (1x) Power Stick and (1x) USB Extension Cable
SPECIFICATIONS
To ensure safe operation, check your device’s
compatibility with Power Stick specifications prior to use
CHECKING POWER LEVELS
Before first use, it is recommended to charge the Power
Stick via the USB Charging Port or the supplied USB
Extension Cable. The Power Stick will take approximately
4 hours to charge 0-100%.
1. Charging the Power Stick:
To Charge, plug the USB Charging Port into any USB
power device, such as a Computer, Laptop, or USB to
AC Adaptor. If needed, use the supplied USB
Extension Cable for easier access when charging.
While charging, the 4 blue LED Indicator Lights will
FLASH to show the power level. When the Power
Stick is fully charged, all 4 LEDs will stop flashing and
1 2
Capacity: 2,600mAh
Input: 5V / 1.0A
Output: 5V / 1.0A (max)
Weight: 82g / 0.18lbs
Temperature: -10ºC – 45ºC
14ºF – 113ºF
Battery Cell: Lithium-Ion
Charging Time: 3-4 Hours
Cycle Life: ≥500 times
Dimensions: 3.9 x 1.3 x 0.9in
99 x 33 x 24mm
CHECKING POWER LEVELS
USE
Before first use, it is recommended to charge the Power
Stick via the USB Charging Port or the supplied USB
Extension Cable. The Power Stick will take approximately
4 hours to charge 0-100%.
1. Charging the Power Stick:
To Charge, plug the USB Charging Port into any USB
power device, such as a Computer, Laptop, or USB to
AC Adaptor. If needed, use the supplied USB
Extension Cable for easier access when charging.
While charging, the 4 blue LED Indicator Lights will
FLASH to show the power level. When the Power
Stick is fully charged, all 4 LEDs will stop flashing and
stay lit. See “Checking Power Levels”.
2. Charging Your Smartphone, Etc:
If your device uses an Apple
Micro USB cable, plug your smartphone, tablet or
other USB powered device into the appropriate
Output Port of the Power Stick. Press the Power
Button on the Power Stick to begin charging your
device (LEDs will stay lit during charging). Charging
will continue until your device is fully charged or the
Power Stick has drained. To manually stop charging,
simply disconnect your device.
Please Note: When using both connectors (Lightning and
Micro USB) at the same time, the Power Stick will charge
the Apple device as first priority. After fully charging the
Apple device, the Power Stick will charge the other device.
• The Power Stick comes pre-packaged with a partial
charge, NOT a full charge. We recommend fully charging
your Power Stick before first use for best performance.
• The Power Stick’s LED Indicator represents the
estimated power levels. Actual charge may vary.
• If your device (smartphone, tablet, etc.) is not charging,
this may be a sign that the battery level of the Power
Stick is very low and you need to recharge it.
• It is normal for the Power Stick to become slightly
warm during use.
In order to keep your Power Stick operating at maximum
potential, please follow these guidelines:
1. Recharge the Power Stick every 2 months when not in
use. Charge to at least 40%, as this will extend the
To show the battery status, press the Power Button. The
LED Indicator Lights will indicate the Power Stick’s power
level according to the diagram.
When charging the Power
Stick, the LED Indicators will
FLASH according to the
current power level (i.e., at
40% charged, one LED will be
lit and the second will be
flashing). Once the Power
Stick is fully charged, the
LEDs will STOP FLASHING.
To view the power level of the
Power Stick while an external
device is connected, press the
Power Button. The LEDs will light up and remain lit while
charging your device.
1 - 25% Charge
Completely Drained
51 - 75% Charge
76 - 100% Charge
26 - 50% Charge
26 - 50% Charged
1 - 25% Charged
76 - 99% Charged
100% Charged
51 - 75% Charged
LED Power Levels:
LED Power Levels When
Charging the Power Stick:
Loading...