Justin jb-20-6000 User Manual
BEFORE INSTALLING AND USING THE PRODUCT,
PLEASE READ THE INSTRUCTIONS THOROUGHLY,
AND RETAIN THEM FOR FUTURE REFERENCE.
PRODUCT OVERVIEW
1. Micro USB Input Port
2. LED Indicator Lights
3. Power Button
4. USB Output Port
Included: (1x) Power Bank and Charging Cable (1x)
To ensure safe operation, check your device’s
compatibility with Power Bank specifications prior to use
6,000mAh Power Bank
With Built-In Stand
Model:
JB-20-6000
USER MANUAL
by
1
BEFORE INSTALLING AND USING THE PRODUCT,
PLEASE READ THE INSTRUCTIONS THOROUGHLY,
AND RETAIN THEM FOR FUTURE REFERENCE.
PRODUCT OVERVIEW
1. Micro USB Input Port
2. LED Indicator Lights
3. Power Button
4. USB Output Port
Included: (1x) Power Bank and Charging Cable (1x)
SPECIFICATIONS
To ensure safe operation, check your device’s
compatibility with Power Bank specifications prior to use
CHECKING POWER LEVELS
Before first use, it is recommended to charge the Power
Bank via the supplied USB Charging Cable. The Power
Bank will take approximately 8 hours to charge 0-100%.
1. Charging the Power Bank:
Plug the supplied Micro USB Charging Cable into the
Power Bank’s Micro USB input. Next, insert the USB
end of the Charging Cable into a computer or AC
power source with a USB Output Port of 5V. While
charging, the 4 blue LED Indicator Lights will FLASH
to show the power level. When the Power Bank is fully
charged, all 4 LEDs will stop flashing and stay lit.
See “Checking Power Levels”.
1 2
Capacity: 3.7V / 6,000mAh
Input: 5V / 1A (max)
Output: 5V / 2.1A (max)
Weight: 189g
0.42lbs
Battery Cell: Lithium-Ion
Charging Time: 8 Hours
Cycle Life: ≥500 times
Dimensions: 3.5 x 3.3 x 1.2in
88 x 84 x 29mm
3
4
2
CHECKING POWER LEVELS
USE
Before first use, it is recommended to charge the Power
Bank via the supplied USB Charging Cable. The Power
Bank will take approximately 8 hours to charge 0-100%.
1. Charging the Power Bank:
Plug the supplied Micro USB Charging Cable into the
Power Bank’s Micro USB input. Next, insert the USB
end of the Charging Cable into a computer or AC
power source with a USB Output Port of 5V. While
charging, the 4 blue LED Indicator Lights will FLASH
to show the power level. When the Power Bank is fully
charged, all 4 LEDs will stop flashing and stay lit.
See “Checking Power Levels”.
2. Charging Your Smartphone, Etc:
Using your device’s supplied charging cable (Apple
Lightning™ cable, Micro USB cable, etc.), plug your
smartphone, tablet or other USB powered device into
the USB Output Port of the Power Bank. Press the
Power Button on the Power Bank to begin charging
your device (LEDs will stay lit for approx. 5 seconds).
Charging will continue until your device is fully charged
or the Power Bank has drained. To manually stop
charging, simply disconnect your device.
•
The Power Bank comes pre-packaged with a partial
charge, NOT a full charge. We recommend fully charging
your Power Bank before first use for best performance.
• The Power Bank’s LED Indicator represents the
estimated power levels. Actual charge may vary.
• If your device (smartphone, tablet, etc.) is not charging,
this may be a sign that the battery level of the Power
Bank is very low and you need to recharge it.
• Your Power Bank includes a special Micro USB to USB
cable. Some devices, namely BlackBerry
REQUIRE this cable for charging. If you do not use this
cable, your device might not charge.
• Some devices require you to turn OFF the device prior
to charging via the Power Bank. If the device is left ON
and plugged into the Power Bank, the tablet will show
a small red “X” over the battery icon signifying that the
tablet is not charging. There is no need for concern,
this will not harm your device. Simply turn OFF your
device to continue charging.
• It is normal for the Power Bank to become slightly
warm during use.
To show the battery status, press the Power Button. The
LED Indicator Lights will indicate the Power Bank’s power
level according to the diagram.
When charging the Power
Bank, the LED Indicators will
FLASH according to the
current power level (i.e., at
40% charged, one LED will be
lit and the second will be
flashing). Once the Power
Bank is fully charged, the
LEDs will STOP FLASHING.
To view the power level of the
Power Bank while an external
device is connected, press the
Power Button. The LEDs will light up for approximately 5
seconds, then turn OFF.
1 - 25% Charge
Completely Drained
51 - 75% Charge
76 - 100% Charge
26 - 50% Charge
26 - 50% Charged
1 - 25% Charged
76 - 99% Charged
100% Charged
51 - 75% Charged
LED Power Levels:
LED Power Levels When
Charging the Power Bank:
Loading...