Juster BISC908 Users Manual

OPERATION INSTRUCTIONS

- SPEAKER CONTROLS

ONON

OFFOFF

Slide the POWER control(2) upwards to turn on the speaker system.
The Power/Pairing indicator LED is flashing that means the power is
ON and waiting to be connected to your Bluetooth audio source.

■ Prepare audio source

Using with your computer
IVT BlueSoleil™

To use the IVT BlueSoleil, first you must pair the Bluetooth
Multimedia speakers with your computer.

Search and connect

1. Double click the Bluetooth icon in
the task tray.

2. Select "My Bluetooth/Search
Bluetooth Device" in the menu, all
Bluetooth devices appear. When
search is over,double click on the
stereo headset icon and enter pin
code"0000", the icon will be
highlighted. Click the right button of
mouse, select "Connecting" then
red dot appear as shooting. This
means connection is successful.
Please repeat step 2 if connection
fails.

Note: The IVT BlueSoleil software is
not included with your Bluetooth
Multimedia speakers.

Using with your Bluetooth mobile phone

The Bluetooth Multimedia speakers can be used with a Bluetooth
Mobile Phone (equipped with A2DP-Bluetooth stereo).

1. Enable Bluetooth on your mobile phone (refer to your mobile
phone user manual).

2. In the phone's Bluetooth menu, search for devices (device
name:JA2).

3. Select Audio Speaker.

4. Enter the PIN code"0000".

07J-BISC908

C o n f i g u r i n g W i n d o w s a u d i o
output

1. Open Control Pane l and d ouble
click Sound and Audio devices.

2. Select t he Audio tab.

3. Under So und playback, c hange
the devic e to BTAU DIO.

4. Under So und recording , change
the devic e to BTAU DIO.

5. Click OK .

Widcom m® Bluetooth software

To use the Widco mm Bluet ooth software, first you must pair the
Bluetoo th Multimedia speaker s.

Note: The Widcomm Bluetooth software is not included with yo ur
Bluetoo th Multmedia speakers .

Search an d connect

1. Double c lick the Blueto oth icon in
the task tray.

2. Click Se arch for device s in range.

3. Double c lick the Stereo Headset
icon. Ent er 0000 for pin cod e.

4. Right cl ick on the stereo h eadset
icon and se lect Audio Sink o n
Stereo He adset to create a
connect ion shortcut.

Configuring Windows a udio output

1. Open Con trol Panel and do uble
click Sound and Audio devices.

2. Select t he Audio tab.

3. Under So und playback, c hange the
device to B luetooth High Q uality

Audio.

4. Click OK .

- CONNECTIONS

TO AUDIO SOURCE

Note:
For Europe: 230V/50Hz
For U.S.A.& Canada: 120V/60Hz
For Japan: 100V, 50/60Hz
For Australia: 240V/50Hz

*Connect the AC power cord to a suitable AC power outlet. The shape of

the plug may differ from that in the fig. to conform to local condition.

1. Insert one plug of the audio cable into the AUDIO IN jack on the
rear of the speaker. Then insert the other one into the
headphone or line output socket of the audio source.

2. Insert the DC plug of the adaptor in to the DC jack of the
speaker . Then connect the power plu g to a su itable AC
outlet.

* Disc onnect the powe r plug of the adaptor f rom the A C out let

when the sy stem is left unused for a lon g period of time.

When LINE I N and Bluetooth are conne cted at the same time,
the LINE IN w ill be priority.

Power/Pairing LED will turn light when the speaker is connected to
your Bluetooth audio source successfully. The LED will flash per
second if you do not connect to your Bluetooth audio source after 3
minutes that means the speaker is coming into idle status. Please
connect again.

Rotate the VOLUME control(1) upwards to increase or upwards to
decrease the listening level.

To turn off the speaker system, slide the POWER button(2) upwards.
The power/pairing LED will turn off.

- BATTERY INSTALLATION

BATTERIES: AA x 4pcs (not included)

Please remove the batteries from the compartment when the system
is left unused for a long period of time.