Juster BIS302GN User Manual

OPERATION INSTRUCTIONS

BIS-C302GN, BIS-C302, BIS-C302G, BIS-C302N

Juster Co.,Ltd.

- SPEAKER CONTROLS

Power/Pairing

POWER

Vol+Vol-

Vol-

Power

Vol+

Press the POWER button to turn on the speaker system. The
Power/Pairing indicator LED is flashing that means the power is ON
and waiting to be connected to your Bluetooth audio source.

■ Prepare audio source

Bluetooth Speaker

Using with your computer
IVT BlueSoleil™

To use the IVT BlueSoleil, first you must pair the Bluetooth
Multimedia speakers with your computer.

Search and connect

1. Double click the Bluetooth icon in
the task tray.

2. Select "My Bluetooth/Search
Bluetooth Device" in the menu, all
Bluetooth devices appear. When
search is over,double click on the
stereo headset icon and enter pin
code"0000", the icon will be
highlighted. Click the right button of
mouse, select "Connecting" then
red dot appear as shooting. This
means connection is successful.
Please repeat step 2 if connection
fails.

Note: The IVT BlueSoleil software is
not included with your Bluetooth
Multimedia speakers.

Using with your Bluetooth mobile phone

The Bluetooth Multimedia speakers can be used with a Bluetooth
Mobile Phone (equipped with A2DP-Bluetooth stereo).

1. Enable Bluetooth on your mobile phone (refer to your mobile
phone user manual).

2. In the phone's Bluetooth menu, search for devices (device
name:JA2).

3. Select Audio Speaker.

4. Enter the PIN code"0000".

07J-BIS302N

C o n f i g u r i n g W i n d o w s a u d i o
output

1. Open Control Pane l and d ouble
click Sou nd and Audio d evices.

2. Select t he Audio tab.

3. Under So und playback, change
the devic e to BTAU DIO.

4. Under So und recording, change
the devic e to BTAU DIO.

5. Click OK .

Widcom m® Bluet ooth software

Juster Co.,Ltd.

To use the Widco mm Bluetooth softwa re, f irst you m ust pair the
Bluetoo th Multimedia speaker s.

Note: The Widcomm Bluet ooth soft ware is not incl uded with your
Bluetoo th Multmedia speakers .

- CONNECTIONS

Search an d connect

1. Double c lick the Bluetooth icon i n
the task tr ay.

2. Click Se arch for devices in range .

3. Double c lick the Stereo Headset
icon. Ent er 0000 for pin code.

4. Right cl ick on the stereo headset
icon and se lect Audio Sink on
Stereo He adset to create a
connect ion shortcut.

Configu ring Windows audio out put

1. Open Con trol Panel and double
click Sou nd and Audio d evices.

2. Select t he Audio tab.

3. Under So und playback, change th e
device to B luetooth High Quality

Audio.

4. Click OK .

Power/Pairing LED will turn light when the speaker is connected to
your Bluetooth audio source successfully. The LED will flash per
second if you do not connect to your Bluetooth audio source after 3
minutes that means the speaker is coming into idle status. Please
connect again.
Press the VOL+ button to increase or the VOL- button to decrease the
listening level.

To turn off the speaker system, press the POWER button again.
The power/pairing LED will turn off.

Note:
For Europe: 230V/50Hz
For U.S.A.& Canada: 120V/60Hz
For Japan: 100V, 50/60Hz
For Australia: 240V/50Hz

AUDIO CABLE

SPEAKER CABLE

*Connect the AC power cord to a suitable AC power outlet. The shape of

DC IN Left SP

the plug may differ from that in the fig. to conform to local condition.

1. Insert the plug of the speaker cable into the Left SP
socket of the main speaker.

2. Insert the 3.5mm plug of the audio cable into the head­ phone or line output socket of the audio source.

3. Insert the DC plug of the adaptor into the DC IN socket.

Then Connect the AC power plug to a suitable AC outlet.
* Disconnect the AC power plug from the AC outlet when

the system is left unused for a long period of time.