Jura Capresso J5 User Manual

The IMPRESSA J5 Manual

The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

Table of contents

Your IMPRESSA J5

Important Safeguards 4 Control elements and accessories Proper use

For your safety ............................................................................................................................................10

The IMPRESSA J5 Manual 13

Model variants ............................................................................................................................................14

Symbol description .................................................................................................................................... 14

Welcome to the world of IMPRESSA! 15 1 IMPRESSA J5 – Perfect Enjoyment, Perfect Aesthetics

Coffee that fulfils your wildest dreams .................................................................................................. 16

Perfect Enjoyment, Perfect Aesthetics ................................................................................................... 16

JURA on the Internet ...................................................................................................................................17

Knowledge Builder ......................................................................................................................................17

2 Preparing and using your IMPRESSA for the first time 18

Supplied as standard ................................................................................................................................. 18

Set up and connect .................................................................................................................................... 18

Filling the water tank ................................................................................................................................. 19

Filling the bean container ......................................................................................................................... 19

First-time use ............................................................................................................................................. 20

Inserting filter and activating ..................................................................................................................21

Determining water hardness and adjusting ..........................................................................................22

Adjusting grinder ......................................................................................................................................24

Switching on ...............................................................................................................................................25

Switching off (standby) .............................................................................................................................25

3 Familiarising yourself with the control options 26

Preparing drinks at the touch of a button ............................................................................................ 26

One-off settings before and while your drink is being prepared ......................................................27

Permanent settings according to cup size ........................................................................................... 28

Permanent settings in programming mode ........................................................................................ 29

Query information and care status ......................................................................................................... 31

4 Recipes 34 5 Preparation at the touch of a button

Barista tips .................................................................................................................................................. 40

Espresso ....................................................................................................................................................... 41

Coffee ........................................................................................................................................................... 41

Cappuccino.................................................................................................................................................. 41

Table of contents

Pre-ground coffee ..................................................................................................................................... 43

Warm milk .................................................................................................................................................. 44

Hot water .................................................................................................................................................... 45

6 Permanent settings according to cup size 46 7 Permanent settings in programming mode

Buttons .........................................................................................................................................................47

Energy save mode.....................................................................................................................................48

Time ............................................................................................................................................................. 49

Programmable switch-on time ...............................................................................................................49

Programmable automatic switch-off time ........................................................................................... 50

Units amount of water/time format ....................................................................................................... 51

Language .....................................................................................................................................................52

8 Maintenance 53

Maintenance tips ........................................................................................................................................53

Rinse machine.............................................................................................................................................53

Changing the filter .................................................................................................................................... 54

Clean machine ........................................................................................................................................... 56

Descale machine ........................................................................................................................................57

Rinse Professional Cappuccino Frother .................................................................................................59

Clean Professional Cappuccino Frother ................................................................................................ 60

Disassemble Professional Cappuccino Frother .....................................................................................61

Removing foreign objects ....................................................................................................................... 62

Cleaning the bean container ................................................................................................................... 62

Descaling the water tank ......................................................................................................................... 63

9 CLARIS plus filter cartridge – Water for perfect coffee 65

As fresh as from the spring .....................................................................................................................65

Quality knows no compromises .............................................................................................................66

10 ‘The milk makes the difference’ 73 11 Accessories and Service 12 Messages on plain text display 13 Troubleshooting 14 Transport and environmentally neutral disposal

Disposal .......................................................................................................................................................89

15 Technical data 90 16 Key technologies and products 17 JURA contact details Index

102

Important Safeguards

Important SafeguardsImportant Safeguards

Save these instructionsSave these instructions

Follow the basic safety

Follow the basic safety precautions

precautions

These safeguards apply for machines with UL safety test (see rating plate and Chapter 15, ‘Technical data and guide values’).

When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

Read all instructions.

Do not touch hot surfaces. Use handles or knobs.

To protect against fire, electic shock and injury to persons, do

not immerse cord, plugs, or body of machine in water or other liquid. Close supervision is necessary when any appliance is used by

or near children. Unplug from outlet when not in use and before cleaning.

Allow to cool before putting or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or

after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment The use of accessory attachement not recommended by the

appliance manufacturer may result in fire, electric shock, or injury to persons. Do not use outdoors.

Do not let the cord hang over the edge of a table or counter,

or touch hot surfaces. Do not place on or near a hot gas or electric burner, or in a

heated oven. Always attach plug to appliance first, then plug cord into the

wall outlet. To disconnect, turn any control ‘OFF’ then remove plug from wall outlet. Do not use appliance for other than intented use.

Use extreme caution when dispensing hot steam.

For household use only.

Important Safeguards

Special cord set instructionsSpecial cord set instructions

WarningWarning

A short power supply cord is provided to reduce the risk result-

ing from becoming entangled in or tripping over a long cord. Longer extension cords are available and may be used if care

is exercised in their use. If an extension cord is used,

the marked electrical rating of the extension cord should be

at least as great as the electrical rating of the appliance, and if the appliance is of the grounded type, the extension courd

should be a grounding type 3-wire cord, and the longer cord shall be arranged so that it will not drape

over the counter top or tabletop where it can be pulled on by children of tripped over.

This appliance has a polarized plug (one blade is wider than

the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature

To reduce the risk of fire or electric shock, do not remove any service covers. No user serviceable parts inside. Repair should be done by authorized personnel only.

CautionCaution

This appliance is for household use. Any servicing other than cleaning and user maintenance should be performed by an authorized service representative:

Do not immerse base in water or try to disassemble.

To reduce the risk of fire or electric shock, do not remove the

base. No user serviceable parts inside. Repair should be done by authorized service personnel only. Check voltage to be sure that the voltage indicated on the

name plate agreees with your voltage. Never use warm or hot water to fill the water container! Use

cold water only. Keep your hands and the cord away from hot parts of the

appliance during operation. Never clean with scouring powders or hard implements.

Important Safeguards

NEVER DO

NEVER DO (or you will void your

(or you will void your warranty protection):

warranty protection):

Never fill instant coffee, chocolate mix etc. into the grinder or

ground coffee funnel (grunder by-pass). It will damage the functioning of the brewing chamber Never fill sugar coated coffee beans into the bean hopper. In

case of doubt, call your dealer. Never fill anything other than coffee beans into the bean con-

tainer (no chocolate, no rice, no nuts, no spices, nothing other than roasted coffee beans). Never do anything with the machine which is not described in

the User‘s Manual. In case of doubt, call your dealer.

Important Safeguards

Control elements and accessories

12 13 14 15

16 17

Figure: IMPRESSA J5 Pianowhite

1 Bean container with aroma preservation

cover 2 Plain text display 3 Water tank 4 Height/width-adjustable coffee spout 5 Coffee grounds container 6 Drip tray 7 Cup platform

8 Filler funnel for pre-ground coffee 9 Fineness of grind switch 10 Storage compartment with measuring spoon

and hot water nozzle 11 Power switch and power cable (side) 12 Connector System

for removable nozzles 13 Professional Cappuccino Frother 14 CLARIS plus filter cartridge 15 JURA Auto-Cappuccino Cleaner 16 JURA cleaning tablets 17 Milk pipe 18 Grinder key

Surface of the machine Display

G On/Off button

1 2

ö Rotary Switch

h Maintenance button

a 1 Espresso button

4 5

s 2 Espressi button

q Hot water button

k Steam button

d 1 Coffee button

f 2 Coffees button

Control elements and accessories

4 5 6 7 8 9

Important information

Proper use Proper use

The machine has been designed and built for domestic use. It should only be used to prepare coffee and to heat milk and water. Use for any other purpose will be deemed improper. JURA cannot accept any responsibility for the consequences of improper use.

Keep this manual close to the IMPRESSA and, if appropriate, pass it on to the next user.

For your safety For your safety

Please read and note carefully the following important safety information.

By doing this, you can avoid the life-threatening danger of electric shock:

Never use a machine which has been damaged or with a

defective power cable. For information on what to do in case of damage, for example

if there is a smell of burning, unplug the machine immedi ately from the mains supply and contact the JURA service centre. If the power cable for this machine is damaged, it must be

repaired either directly by JURA or by a JURA approved service centre. Make sure that the IMPRESSA and the power cable are not

located close to hot surfaces. Be careful to ensure that the power cable does not get caught

and does not rub against sharp edges. Never open and repair the machine yourself. Do not modify

the machine in any way that is not described in the IMPRESSA Manual. The machine contains live parts. If opened, there is a danger of serious injury. Repairs may only be carried out by JURA approved service centres, using original spare parts and accessories.

There is a risk of scalds or burns on the spouts or in the nozzle:

Place the machine out of the reach of children.

Do not touch any hot parts. Use the handles provided.

Important information

Be careful to ensure that the appropriate nozzle is installed

and clean. The nozzle or parts of the nozzle might come off if the parts are not assembled correctly or a blockage occurs.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

Never allow the power cable to loosely hang down. The power

cable can be tripped over or damaged. Protect your IMPRESSA from environmental influences such

as rain, frost and direct sunlight. Do not put the IMPRESSA, cable or connections in water.

Do not put the IMPRESSA or any individual parts in the dish-

washer. Turn your IMPRESSA off at the power switch before starting

any cleaning operation. Always wipe your IMPRESSA with a damp cloth rather than a wet one, and protect it from prolonged water splash. Only connect the machine to a power supply in accordance

with the technical data (see rating plate and Chapter 15, ‘Technical Data’). Use only original JURA care products. Use of accessories that

are not explicitly recommended by JURA could damage the IMPRESSA. Do not use any coffee beans treated with additives or caramel-

ised coffee beans. Always fill the water tank with cold, fresh mains water.

If you will be absent for an extended period, turn the machine

off and unplug.

Risk to children and persons with limited capabilities in operating machines:

The machine is not designed to be operated by children and

persons with limited capabilities. The machine may only be used by persons who are able to

operate the machine safely.

Important information

The IMPRESSA J5 ManualThe IMPRESSA J5 Manual

The IMPRESSA J5 Manual

You are holding the manual for your IMPRESSA J5 in your hand. It will help you to familiarize yourself with your IMPRESSA safely and quickly and teach you the full range of facilities it offers.

Chapter 2, ‘Preparing and using your IMPRESSA for the first time’, explains step-by-step how to set up and prepare the IMPRESSA.

Chapter 3, ‘Familiarising yourself with the control options’ is important for you to read as you are familiarising yourself with your IMPRESSA. It invites you to actively explore all the different coffee experiences that it offers.

As coffee and coffee specialities are very important to JURA, we have compiled a selection of tasty suggestions for you in Chapter 4, ‘Recipes’.

All the other chapters are intended to help you when you have a specific query.

If you use the IMPRESSA J5 Manual, you will become a master at preparing exciting coffee specialities, you will be a Barista!

Model variantsModel variants

The IMPRESSA J5 Manual covers all J series IMPRESSA models.

Symbol descriptionSymbol description

Warnings

CAUTION

Symbols used

Always take note of any information marked with the CAUTION or WARNING symbol. The signal word WARNING points out potential risks of injury, and the signal word CAUTION potential risk of material damage.

The CAUTION symbol is used to draw attention to circumstances which could cause the machine to become damaged.

Information and tips to make things easier for you as you use your IMPRESSA.

References to the online JURA website, where you can find interesting further information: www.jura.com

Prompt to take action. This symbol means that you are being prompted to perform some action.

Welcome to the world of IMPRESSA!Welcome to the world of IMPRESSA!

Dear customer,

We thank you for the trust that you have placed in us by purchasing a JURA IMPRESSA coffee machine. The machines, which are produced in Switzerland, have already impressed independent, critical testers of goods and design award juries. We will do everything we can to ensure that this fully automated, genuine 2-cup Espresso and coffee machine continues to deliver perfect coffee specialities at the press of a button to your family and your guests for years to come.

The IMPRESSA Manual will teach you everything you need to know on the subject of operating and tailoring your IMPRESSA to your particular preferences. Other subjects covered include how to solve the problem of scale build-up and important tips on care. Our primary concern is to stimulate your imagination with attractive coffee recipes and to invite you to put the wealth of possibilities offered by the JURA fully automated machine to use on a daily basis.

We wish you many stimulating and enjoyable moments with your IMPRESSA.

Welcome to the world of IMPRESSA!

Yours sincerely,

Emanuel Probst General Manager

1 IMPRESSA J5 – Perfect Enjoyment, Perfect Aesthetics

1 IMPRESSA J5 – Perfect Enjoyment, Perfect Aesthetics1 IMPRESSA J5 – Perfect Enjoyment, Perfect Aesthetics

Coffee that fulfils your

Coffee that fulfils your wildest dreams

wildest dreams

Perfect Enjoyment,

Perfect Enjoyment, Perfect Aesthetics

Perfect Aesthetics

JURA develops superior fully automatic coffee/Espresso machines which get the best taste and aroma out of every coffee blend and roast. It delivers this through a unique, intelligent pre-brew system combined with loving attention to detail and years of experience.

The uncompromising all-round design of the IMPRESSA J5 indulges the eyes as well as the taste buds. Gourmets will start to rave when they live out their coffee fantasies and experience a new dimension of enjoyment with Ristretto, Espresso, Café Crème, Cappuccino, Latte Macchiato and many other trendy specialities. This is easy to achieve, because the innovative operating concept leaves nothing to be desired when it comes to simplicity. And the integrated cup illumination places every coffee speciality in the right light.

Breathtakingly beautiful

Clear, no-frill contours and high-quality materials set the tone of the design of the J series IMPRESSA models. All details have been exactly thought out and come together to form an aesthetic whole, so everyone will be enthusiastic about coffee. This makes IMPRESSA J series a veritable household fixture, which, thanks to its compact design, can easily be placed anywhere.

Pure ergonomics

The centrally arranged control elements, with a unique Rotary Switch and a plain text display which speaks your language, will allow you to quickly and intuitively make your coffee wishes come true. Here, the focus is on your personal taste. Simply select the coffee strength, amount of water and temperature according to your individual preferences. You can even choose between three hot water temperature levels. Accessories such as the measuring spoon and the hot water nozzle can be conveniently stored in the storage compartment where they are always within reach.

1 IMPRESSA J5 – Perfect Enjoyment, Perfected Aesthetics

Height and width-adjustable coffee spout

Another JURA innovation is the height and width-adjustable coffee spout. It allows precise adaptation to different cup heights and diameters. This prevents coffee splashing and guarantees a fantastic crema of ideal consistency.

JURA on the Internet JURA on the Internet

Knowledge BuilderKnowledge Builder

Connector System

This makes it possible to use the Professional Cappuccino Frother, which is fitted as standard, for perfect milk foam or warm milk, a hot water nozzle for an even jet of water, and the optionally available 2-stage frothing nozzle.

Further information on this subject can be found in Chapter 11, ‘Accessories and Service’.

Visit us on the Internet.

At www.jura.com you will find interesting and up-to-date

information on your IMPRESSA and on every aspect of coffee.

You can familiarize yourself with your IMPRESSA J5 in a fun way on the PC.

The Knowledge Builder awaits you at www.jura.com. The

interactive assistant, LEO, will support you and explain the benefits of and how to use your IMPRESSA.

2 Preparing and using your IMPRESSA for the first time

2 Preparing and using your IMPRESSA for the first time2 Preparing and using your IMPRESSA for the first time

This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience using it.

Supplied as standardSupplied as standard

Set up and connect Set up and connect

The following items are supplied as standard:

Your JURA IMPRESSA fully automatic coffee machine

The Welcome Pack, which includes:

The IMPRESSA J5 Manual

IMPRESSA J5 Quick Reference Guide

CLARIS plus filter cartridge

Filter cartridge extension

Grinding key

Milk pipe

JURA cleaning tablets

Aquadur® test strips

JURA Auto-Cappuccino Cleaner

JURAworld of Coffee gift

Keep the packaging for your IMPRESSA. It is used to protect the machine during transportation.

When setting up and connecting your IMPRESSA, please proceed as follows:

Set the IMPRESSA down on a horizontal surface that is not

sensitive to water. Choose a spot for your IMPRESSA which is protected against

overheating. Never place the IMPRESSA on a hot surface, such as a hob.

Only connect your IMPRESSA to a power supply in accordance

with the technical data (see rating plate and Chapter 15, ‘Technical Data’). Make sure that no one can trip over the power cable.

2 Preparing and using your IMPRESSA for the first time

Filling the water tank Filling the water tank

Filling the bean

Filling the bean container

container

CAUTIONCAUTION

To enjoy perfect coffee, we recommend that you change the water every day.

Only use fresh, cold water to refill the water tank and never

milk, mineral water or other liquids.

Open the cover of the water tank.

Remove the water tank and rinse it with cold water.

Fill the water tank with fresh, cold mains water and

reinsert. Close the cover of the water tank.

The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar), either pre-ground or in the form of freeze-dried coffee, will damage the grinder.

Only use untreated coffee beans to refill the bean container.

Open the cover of the bean container and remove the aroma

preservation cover. Remove any dirt or foreign objects inside the bean

container. New machines contain an information sheet in the bean

container. Remove this information sheet. Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

2 Preparing and using your IMPRESSA for the first time

First-time use First-time use

If the machine is operated with a defective power cable, there is a danger of electric shock.

Never use a machine which has a defective power cable.

WARNINGWARNING

Precondition: The water tank must be full.

Insert the mains plug into a power socket.

e l Switch on the IMPRESSA using the power switch on the right

side of the machine. The On/Off button

g l Press the On/Off button to switch the IMPRESSA on.

The Rotary Switch lights up. appears on the display.

Ä l Turn the Rotary Switch until the desired language appears.

For example

M L Press the Rotary Switch to confirm that you want the English

language setting.

OK PRESS RINSE

g will light up (standby).

SPRACHE DEUTSCH

LANGUAGE ENGLISH

appears briefly on the display to confirm the setting.

, the maintenance button h lights up.

Place a receptacle under the Professional Cappuccino

Frother.

H L Press the maintenance button.

SYSTEM FILLING

A small amount of water will flow out of the Professional Cappuccino Frother. This operation stops automatically. the display.

PRESS RINSE

, the system fills up with water.

HEATING

, the maintenance button h lights up.

appears on

Inserting filter and

Inserting filter and activating

activating

2 Preparing and using your IMPRESSA for the first time

Place a receptacle under the coffee spout.

h l Press the maintenance button.

The machine will rinse itself, stopping automatically.

READY

use.

After the first time that a coffee speciality has been prepared,

it may happen that if the grinder has not yet been completely filled with coffee beans. In that case, prepare a different coffee speciality.

Your IMPRESSA no longer has to be de-scaled if you use the CLARIS plus filter cartridge.

Perform the ‘Insert filter’ operation without interruptions. This

will ensure that your IMPRESSA always produces its best.

You can also try out the ‘Insert filter’ operation online. Visit the

Knowledge Builder at www.jura.com.

Further information on CLARIS can be found in Chapter 9, ‘CLARIS plus filter cartridge – Water for perfect coffee’.

appears on the display. Your IMPRESSA is ready to

FILL BEANS

appears on the display

After two months, the filter will cease to work. Monitor the

elapsed time as shown on the date plate on the cartridge holder.

Precondition:

READY

m l Keep the Rotary Switch pressed until,

the display.

ä l Turn the Rotary Switch until

appears on the display.

FILTER -

RINSE

appears.

appears on

m l Press the Rotary Switch to enter the programme item.

appears on the display.

NO -

ä l Turn the Rotary Switch until

YES

appears.

2 Preparing and using your IMPRESSA for the first time

m l Press the Rotary Switch to confirm this setting.

OK INSERT

Remove the CLARIS plus filter cartridge and the filter cartridge extension from the Welcome Pack.

Stick the extension on top of the filter cartridge.

Remove the water tank and empty it.

Lift the cartridge holder and insert the filter cartridge into the water tank, applying light pressure.

Close the cartridge holder. It will click into place audibly.

Fill the water tank with cold, fresh mains water and reinsert.

Place a receptacle (at least 500 ml) under the Professional Cappuccino Frother.

Turn the selection lever of the nozzle to the STEAM position

h l Press the maintenance button.

FILTER R IN SIN G

You can interrupt the rinsing of the filter at any time by pressing any button. The water may be slightly discoloured. This is not harmful to

health, nor does it affect the taste.

appears briefly on the display to confirm the setting.

, the maintenance button h lights up.

k .

. Water will flow out at the nozzle.

Determining water

Determining water hardness and adjusting

hardness and adjusting

Rinsing of the filter automatically stops after approx. 500 ml.

HEATING

appears. The filter is now activated.

The harder the water is, the more frequently the IMPRESSA needs to be descaled. It is therefore important to adjust the water hardness.

However, if you are using the CLARIS plus filter cartridge and

have activated the filter, you will not be able to adjust the water hardness. The water hardness is adjusted to 16° dH (German hardness)

in the factory.

appears on the display, and then

READY

2 Preparing and using your IMPRESSA for the first time

The water hardness can be adjusted between 1° dH and

30° dH. This can also be deactivated, which means that the IMPRESSA won’t let you know when it has to be descaled.

You can find out what the water hardness is by using the Aquadur® test strips enclosed in the Welcome Pack.

Hold the test strip briefly (for one second) under flowing

mains water. Shake off the water. Wait for about 1 minute.

You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the description on the packaging. You can now adjust the water hardness.

Example: To change the water hardness from

25° dH

Precondition:

, proceed as follows:

READY

appears on the display.

M l Keep the Rotary Switch pressed until,

the display.

Ä l Turn the Rotary Switch until

displayed.

HARDNESS -

16° dH

RINSE

appears on

M l Press the Rotary Switch to enter the programme item.

16° dH

Ä l Turn the Rotary Switch until

appears on the display.

25° dH

is displayed.

m l Press the Rotary Switch to confirm the setting.

appears briefly on the display to confirm that the water

hardness is set.

HARDNESS

Ä l Turn the Rotary Switch until

EXIT

appears.

m l Press the Rotary Switch to exit programming mode.

READY

appears on the display.

2 Preparing and using your IMPRESSA for the first time

Adjusting grinder Adjusting grinder

CAUTIONCAUTION

You can adjust the grinder to suit the roast of your coffee.

Our recommendations:

Select a fine setting for a light roast.

Select a coarse setting for a darker roast.

If you adjust the fineness of grind when the grinder is not operating, the fineness of grind switch could be damaged.

Only adjust the fineness of grind when the grinder is

running.

Example: To change the fineness of grind during coffee preparation, proceed as follows:

Open the cover of the storage compartment.

Place a cup under the coffee spout.

d l Press the 1 Coffee button.

The grinder starts and After this, the coffee strength is briefly displayed.

Turn the fineness of grind switch to the desired position

while the grinder is running. The coffee will be prepared and the fineness of grind is adjusted.

1 COFFEE

appears on the display.

2 Preparing and using your IMPRESSA for the first time

Switching on Switching on

Switching off (standby ) Switching off (standby )

When the IMPRESSA is switched on, a prompt to perform a rinse operation automatically appears.

Precondition: Your IMPRESSA is switched on at the power switch and the On/Off button

g is illuminated (standby).

g l Press the On/Off button to switch the IMPRESSA on.

HEATING PRESS RINSE

Place a receptacle under the coffee spout.

, the maintenance button h lights up.

h l Press the maintenance button.

The machine will rinse itself, stopping automatically.

READY

use.

When you switch off your IMPRESSA, the system is automatically rinsed.

Place a receptacle under the coffee spout.

appears on the display. Your IMPRESSA is ready to

g l Press the On/Off button.

The system will be rinsed. play. The operation stops automatically. The IMPRESSA is switched off (in standby mode), and the On/Off symbol

g is illuminated.

RINSING

appears on the dis-

3 Familiarising yourself with the control options

3 Familiarising yourself with the control options3 Familiarising yourself with the control options

With the IMPRESSA, you can prepare an excellent coffee speciality at the touch of a button. You also have the option of adjusting the coffee strength and temperature, as well as the amount of water to your personal taste.

This chapter will allow you to become familiar with all control options with the aid of examples. To familiarise yourself with your IMPRESSA, we recommend that you make a point of actively trying the facilities described in this chapter. You will find this is well worthwhile.

Learn how to perform the following:

Preparing drinks at the touch of a button

One-off settings before and while your drink is being

prepared Permanent settings according to cup size

Permanent settings in programming mode

You can stop the machine at any time while a coffee speciality

is being prepared. To do this, press any button.

Preparing drinks at the

Preparing drinks at the touch of a button

touch of a button

If you prefer to familiarize yourself with your IMPRESSA in a

fun way on the computer, the interactive Knowledge Builder tutorial program can be found on the Internet at www.jura.com.

Prepare your favourite coffee speciality at the touch of a button.

All coffee specialities are prepared following this model at the touch of a button.

Example: This is how to prepare an Espresso. Precondition:

READY

Place an Espresso cup under the coffee spout.

appears on the display.

One-off settings before

One-off settings before and while your drink is

and while your drink is being prepared

being prepared

3 Familiarising yourself with the control options

a l Press the 1 Espresso button.

1 ESPRESSO

coffee strength is briefly displayed. The pre-set amount of water flows into the cup and the process stops automatically.

READY

You can change both the coffee strength before and the amount of water while your drink is being prepared. These settings are not saved.

One-off settings before and during coffee preparation always follow this model.

appears on the display.

appears on the display. After this, the

Adjust the coffee strength

Adjust the coffee strength before your drink is

before your drink is prepared

prepared

Adjust the amount of water

Adjust the amount of water while your drink is being

while your drink is being prepared

prepared

The following coffee strength options are available:

Mild

Normal

Strong

Xstrong

Example: This is how to prepare a strong cup of coffee. Precondition:

READY

Place a cup under the coffee spout.

ä l Turn the Rotary Switch until

display.

d l Press the 1 Coffee button until

1 COFFEE

briefly appears. The pre-set amount of water flows into the cup. The preparation stops automatically. display.

Example: This is how to prepare a Precondition:

READY

Place a cup under the coffee spout.

appears on the display.

STRONG

appears on the display, and then

110 ML

appears on the display.

appears on the

STRONG

READY

cup of coffee.

is displayed.

appears on the

d l Press the 1 Coffee button.

1 COFFEE

briefly appears.

appears on the display, and then the strength

STRONG

3 Familiarising yourself with the control options

Permanent settings

Permanent settings according to cup size

according to cup size

Ä l Turn the Rotary Switch until

The set amount of water flows into the cup. The preparation stops automatically.

It is easy to make permanent settings for the amount of water for all coffee specialities, the hot water and steam according to cup size. As in the following example, adjust the amount of water once. Every time you prepare a drink in the future, this amount of water will be dispensed.

Permanent settings according to cup size works the same way for all coffee specialities.

Example: To make permanent settings for the amount of water for an Espresso, proceed as follows: Precondition:

READY

Place an Espresso cup under the coffee spout.

appears on the display.

READY

110 ML

appears on the display.

is displayed.

a l Press and hold the 1 Espresso button.

1 ESPRESSO

appears on the display.

a l Hold the 1 Espresso button down until

ENOUGH COFFEE ?

appears.

a l Release the 1 Espresso button.

Coffee preparation will start and the Espresso will flow into the cup. Press any button as soon as enough Espresso has flowed

into the cup. Espresso preparation will now stop. the display. The set amount of water for an Espresso will be permanently stored.

appears briefly on

You can alter these settings at any time by repeating the

above procedure.

Permanent settings in

Permanent settings in programming mode

programming mode

Programme item Subitem Explanation

RINSE

BUTTONS

FILTER -/√

HARDNESS

displayed when the filter is not activated)

ENERGY -/√

TIME --:--

UNIT ON --:--

OFF AFTER

INFO

DISPLAY

(is only

You can easily adjust your IMPRESSA to your personal coffee blends and specialities. Simply by turning and pressing the Rotary Switch, you can navigate through the easy-to-understand program steps and make permanent settings.

You can make the following settings with the Rotary Switch.

RINSE FILTER CLEAN

DE-SCALE

SELECT BUTTON

YES √ NO -

INACTIVE 1° dH

SAVE SAVE √

–

30°dH

l Select the desired maintenance programme.

If you don’t take any action, the programming mode is exited after approx. 5 seconds.

l Select your settings for the coffee specialities,

steam and hot water.

l Indicate whether you operate your IMPRESSA

with or without a CLARIS plus filter cartridge.

l Adjust the water hardness.

l Select an energy saving mode.

l Set the time. l Set the switch-on time.

INACTIVE

0.5 H

BUTTONS CLEAN DE-SCALE

filter is not activated)

FILTER

filter is activated)

ML / OZ 24 H / AM PM

–

15 H

(only when

l Set the switch-off time.

l Keep track of all prepared coffee specialities

and call the care status.

l Select the unit of the amount of water and

the time format.

3 Familiarising yourself with the control options

Programme item Subitem Explanation

LANGUAGE

EXIT

DEUTSCH ENGLISH

FRANCAIS ITALIANO NL

–

Settings in programming mode always follow the same model.

l Select your language.

l Exit programming mode.

Example: To change the temperature of 1 Espresso from to Precondition:

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

proceed as follows:

HIGH

READY

appears on the display.

RINSE

BUTTONS

NORMAL

appears.

M l Press the Rotary Switch to enter the programme item.

SELECT BUTTON

In the next step, select the coffee speciality button for which

you would like to make settings. No coffee speciality will be prepared hereby.

a l Press the 1 Espresso button.

WATER

Ä L Turn the Rotary Switch until

TEMP.

appears.

M l Press the Rotary Switch to enter the programme item.

NORMAL

Ä L Turn the Rotary Switch until

HIGH

appears.

M l Press the Rotary Switch to confirm the setting.

appears briefly on the display.

OK TEMP.

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programme item.

BUTTONS

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit programming mode.

READY

Query information and

Query information and care status

care status

3 Familiarising yourself with the control options

Under the programme item information:

Number of prepared coffee specialities, steam and hot water

Care status and number of executed maintenance pro-

grammes (cleaning, de-scaling, filter change)

, you can query the following

INFO

Query information Query information

Precondition:

READY

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

appears on the display.

appears.

INFO

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

BUTTONS

M l Press the Rotary Switch.

Total number of the prepared coffee specialities appears on the display.

By pressing the individual buttons, the respective number of

coffee specialities, steam and hot water is displayed. Open the filler funnel for pre-ground coffee in order to display this number.

M l Press the Rotary Switch.

BUTTONS

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit this programme item.

INFO

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programming mode.

READY

Care status query Care status query

Example: To query the care status and number of executed clean-

ings, proceed as follows: Precondition:

READY

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

appears on the display.

appears.

INFO

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

BUTTONS

Ä L Turn the Rotary Switch until

CLEAN

appears.

3 Familiarising yourself with the control options

M l Press the Rotary Switch.

M l Press the Rotary Switch to exit this query.

Ä L Turn the Rotary Switch until M l Press the Rotary Switch to exit this programme item.

Ä L Turn the Rotary Switch until M l Press the Rotary Switch to exit the programming mode.

The number of executed cleanings appears on the display.

You can switch between the number of executed maintenance programmes and the respective care status by turning the Rotary Switch. The filled out fields show the care status. Once all fields are filled out, your IMPRESSA will request the respective maintenance programme.

CLEAN

appears.

EXIT

INFO

appears.

EXIT

READY

3 Familiarising yourself with the control options

4 Recipes

You can use your IMPRESSA to create coffee classics or extraordinary specialities in your home. You can find additional coffee recipes online at www.jura.com.

Further information on how to operate your IMPRESSA can be found in Chapter 3, ‘Familiarising yourself with the control options’.

Cappuzino

Ingredients (for two people)

Distribute the cinnamon syrup into Cappuccino cups.

Place cup under the Professional Cappuccino Frother and half fill with milk foam.

Pour Espresso directly into the milk foam and sprinkle it with cinnamon powder.

200 ml cold milk 2 strong Espressi 20 ml cinnamon syrup Powdered cinnamon for decoration purposes

Café Chocolat Blanc

Ingredients (for two people)

Froth milk in two decorative glasses with the Professional Cappuccino Frother.

Melt white chocolate in a bain marie.

Prepare two Espressi, stir with the melted chocolate and pour into the milk foam.

Sprinkle grated white chocolate over the drinks.

50 g white chocolate 2 Espressi 200 ml milk Grated white chocolate for decoration purposes

4 Recipes

Winter’s dream coffee

Ingredients (for two people)

Prepare 2 Espressi.

Stir Espresso with cocoa and gingerbread seasoning and distribute into two glasses.

Froth the milk and add to the Espressos.

Sprinkle with small pieces of gingerbread.

2 strong Espressi 200 ml of hot cocoa 1 pinch of gingerbread seasoning 100 ml milk Sugar to suit personal taste 1-2 gingerbread cakes for decoration

4 Recipes

Latte Macchiato Frio

Ingredients (for two people)

Prepare Espresso and allow to cool.

Put cold milk, the maple syrup and crushed ice in a glass and mix.

Add the cold Espresso.

2 cold Espressi 200 ml cold milk 1 small cup crushed ice 20 ml maple syrup Milk foam

5 Preparation at the touch of a button

5 Preparation at the touch of a button 5 Preparation at the touch of a button

In this chapter, you will find out how to prepare coffee specialities, milk and hot water without making further settings.

Chapter 3, ‘Familiarising yourself with the control options’, will teach you how to adjust the settings to your personal preferences. Alternatively, you can use Chapter 6, ‘Permanent settings according to cup size’ or Chapter 7, ‘Permanent settings in programming mode’.

You can stop the machine at any time while a coffee speciality

is being prepared. To do this, press any button.

You can also try out the preparation of coffee specialities

online. Visit the Knowledge Builder at www.jura.com.

Barista tipsBarista tips

A ‘Barista’ is someone who is a professional at preparing Espressos and coffee. In Italy this is a respected profession. The Barista knows every coffee speciality and is a master at preparing perfect drinks. In conjunction with your JURA IMPRESSA, you too can achieve perfect results.

To do this, follow these Barista tips:

Store your coffee in a dry place. Oxygen, light, heat and mois-

ture will spoil the coffee. Use only fresh, cold mains water so that the coffee aroma can

be at its best. To enjoy perfect coffee, please change the water every day.

Set the grinder to your preferred roast. The correct fineness of

grind will ensure that the flavours are released in the optimal way. Pre-heat your cup.

Use a teaspoon for sugar and do not use sugar lumps to

ensure that the crema or milk foam are not spoilt. Adjust the height- and width-adjustable coffee spout individ-

ually to your cup. This will ensure that you get a really good crema.

5 Preparation at the touch of a button

Espresso Espresso

Coffee Coffee

The classic coffee drink from Italy. There is a definite crema on the surface of the Espresso.

Example: This is how to prepare an Espresso.

Place an Espresso cup under the coffee spout.

a l Press the 1 Espresso button.

1 ESPRESSO

strength is briefly displayed. The pre-set amount of water flows into the cup and the process stops automatically.

To prepare two cups of Espresso, place two cups under the coffee spout and press the 2 Espressi button

Example: This is how to prepare a coffee.

Place a cup under the coffee spout.

appears on the display. After this, the

READY

appears on the display.

d l Press the 1 Coffee button.

1 COFFEE

is briefly displayed. The pre-set amount of water flows into the cup and the process stops automatically. play.

appears on the display. After this, the strength

READY

appears on the dis-

Cappuccino Cappuccino

To prepare two cups of coffee, place two cups under the coffee spout and press the 2 Coffees button

A classic Italian recipe. The Cappuccino is made up of one-third each of Espresso, hot milk and milk foam. The finishing touch is a sprinkling of cocoa powder.

5 Preparation at the touch of a button

Precondition: The Professional Cappuccino Frother is mounted.

Take the milk pipe out of the Welcome Pack.

Take the protective cap off the Professional Cappuccino

Frother. Attach the milk pipe to the nozzle.

Insert the other end in a milk carton/bottle or connect it to

a milk container. Place a cup under the Professional Cappuccino Frother.

Turn the selection lever of the nozzle to the milk foam

position .

k l Press the steam button.

HEATING READY

appears as soon as the IMPRESSA has heated up.

k l Press the steam button.

STEAM

The operation stops automatically after reaching the pre-set amount of steam.

The milk foam preparation can be interrupted at any time. To

do this, press any button. While milk foam is being prepared, you can change the pre-

set amount of water by turning the Rotary Switch. You can continue with preparing milk foam within approx. 40

seconds.

, the milk foam is being prepared.

Move the cup under the coffee spout.

a l Press the 1 Espresso button.

1 ESPRESSO

strength is briefly displayed. The pre-set amount of water flows into the cup. Drink preparation stops automatically. the display.

appears on the display. After this, the

READY

appears on

5 Preparation at the touch of a button

To ensure that the Professional Cappuccino Frother works perfectly, you should rinse and clean it regularly. You can find more information about this in Chapter 8, ‘Maintenance – Professional Cappuccino Frother’.

The high-quality milk containers available from JURA are a useful addition for all lovers of milk specialities. Further information about JURA accessories can be found in Chapter 11, ‘Accessories and Service’.

Pre-ground coffee Pre-ground coffee

You can choose a second coffee blend with the filler funnel for preground coffee.

All coffee specialities with pre-ground coffee are prepared following this model.

Never add more than two level measuring spoons of pre-

ground coffee. Use pre-ground coffee which is not ground too finely. Very

fine coffee can block up the system so that the coffee only comes out in drips. If you didn’t fill a sufficient amount of pre-ground coffee,

ENOUGH PRE-GROUND

stops operation. The desired coffee speciality must be prepared within approx.

1 minute after filling with the pre-ground coffee. Otherwise, the IMPRESSA stops the operation and is ready to use again.

Example: This is how to prepare a cup of coffee using pre-ground coffee.

Place a cup under the coffee spout.

Open the cover of the storage compartment, take out the

measuring spoon for pre-ground coffee and close the cover again. Open the cover for pre-ground coffee.

is displayed and the IMPRESSA

NOT

FILL PRE-GROUND

5 Preparation at the touch of a button

Place one level measuring spoon of pre-ground coffee in the

filler funnel. Close the cover for pre-ground coffee again.

SELECT BUTTON

d l Press the 1 Coffee button.

1 COFFEE GROUND

The pre-set amount of water flows into the cup and the process stops automatically.

appears on the display. After this,

is briefly displayed.

READY

appears on the display.

PRE-

Warm milk Warm milk

Precondition: The Professional Cappuccino Frother is installed.

Take the milk pipe out of the Welcome Pack.

Take the protective cap off the Professional Cappuccino

Frother. Attach the milk pipe to the nozzle.

Insert the other end in a milk carton/bottle or connect it to

a milk container. Place a cup under the Professional Cappuccino Frother.

Turn the selection lever of the nozzle to the milk position .

k l Press the steam button.

HEATING READY

appears as soon as the IMPRESSA has heated up.

k l Press the steam button.

STEAM

prepared. The operation stops automatically after reaching the pre-set amount of steam.

The milk preparation can be interrupted at any time. To do

this, press any button. While milk is being prepared, you can change the pre-set

amount of water by turning the Rotary Switch. You can continue with preparing milk within approx.

40 seconds. After this, the machine must heat up again.

appears on the display. The warm milk is being

5 Preparation at the touch of a button

To ensure that the Professional Cappuccino Frother works perfectly, you should rinse and clean it regularly. The description for this can be found in Chapter 8, ‘Maintenance – Professional Cappuccino Frother’.

Hot water Hot water

CAUTIONCAUTION

To obtain a perfect water flow, attach the exchangeable hot water nozzle. You can find the nozzle under the cover of the storage compartment.

There is a danger of scalding from hot water splashes.

Avoid direct contact with the skin.

Start by exchanging the nozzle:

Carefully remove the Professional Cappuccino Frother from

the Connector System

Open the cover of the storage compartment. Take out the hot water nozzle and close the cover again.

Stick the hot water nozzle onto the Connector System lightly rotating. Place a cup under the hot water nozzle.

q l Press the hot water button.

WATER

perature briefly appears. The pre-set amount of water flows into the cup and the process stops automatically.

READY

By pressing the hot water button several times (within approx.

2 seconds) you can set the temperature to your individual preference. This setting is not saved. During preparation, you can change the amount by turning

the Rotary Switch.

appears on the display, and then the pre-set tem-

6 Permanent settings according to cup size

6 Permanent settings according to cup size 6 Permanent settings according to cup size

The permanent settings according to cup size works the same way for all coffee specialities.

Example: To make permanent settings for an Espresso, proceed as follows. Precondition:

READY

Place an Espresso cup under the coffee spout.

appears on the display.

a l Press and hold the 1 Espresso button.

1 ESPRESSO

appears on the display.

a l Hold the 1 Espresso button down until

COFFEE ?

appears.

a l Release the 1 Espresso button.

Coffee preparation will start and the Espresso will flow into

the cup. Press any button as soon as enough Espresso has flowed

into the cup. Espresso preparation stops. play. Your IMPRESSA will remember the amount of water you have specified for an Espresso for good.

ENOUGH

appears briefly on the dis-

You can alter these settings at any time by repeating the

above procedure.

7 Permanent settings in programming mode 7 Permanent settings in programming mode

7 Permanent settings in programming mode

Buttons Buttons

Buttons Temp. Strength Amount

1 Espresso

NORMAL, HIGH MILD, NORMAL

In the following you will find out how to make permanent settings.

15 ML

STRONG

XSTRONG

2 Espressi

1 coffee

NORMAL, HIGH

NORMAL, HIGH MILD, NORMAL

STRONG

–

15 ML

(per cup)

15 ML

XSTRONG

2 coffees

Hot water

NORMAL, HIGH

REGULAR, NORMAL

–

15 ML

(per cup)

15 ML

HOT

Steam – –

Permanent settings in programming mode always follow the same model.

Example: To change the temperature of 1 Espresso from to Precondition:

, proceed as follows:

HIGH

READY

appears on the display.

3 SEC

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

BUTTONS

M l Press the Rotary Switch to enter the programme item.

SELECT BUTTON

–

240 ML

–

240 ML

–

240 ML

–

450 ML

–

120 SEC

RINSE

appears.

NORMAL

appears.

In the next step, select the coffee speciality button for which

you would like to make settings. No coffee speciality will be prepared hereby.

7 Permanent settings in programming mode

A L Press the 1 Espresso button.

Ä L Turn the Rotary Switch until M l Press the Rotary Switch to enter the programme item.

Ä L Turn the Rotary Switch until M l Press the Rotary Switch to confirm the setting.

Ä L Turn the Rotary Switch until M l Press the Rotary Switch to exit the programme item.

Ä L Turn the Rotary Switch until M l Press the Rotary Switch to exit the programming mode.

WATER

NORMAL

appears briefly on the display.

OK TEMP.

BUTTONS

READY

TEMP.

HIGH

EXIT

appears.

Energy save mode Energy save mode

An energy saving mode permanent setting can be made under this programme item (E.S.M.

Your IMPRESSA has two energy-saving modes:

ENERGY -

Your IMPRESSA is continuously ready for use.

All coffee and milk products, as well as hot water, can be pre-

pared without having to wait.

ENERGY √

After approx. 5 minutes, your IMPRESSA switches to the en-

ergy-saving temperature and is not ready for use. Before coffee, hot water or milk is prepared, the machine

heats up for approx. 30 seconds.

ENERGY -

Example: To change the energy-saving level from

ENERGY √

Precondition:

, proceed as follows:

READY

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

is defined under the basic settings.

ENERGY -

appears on the display.

RINSE

ENERGY -

appears.

7 Permanent settings in programming mode

M l Press the Rotary Switch to enter the programme item.

SAVE -

Ä L Turn the Rotary Switch until

SAVE √

appears.

M l Press the Rotary Switch to confirm this selection.

appears briefly on the display.

OK ENERGY √

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programming mode.

READY

Time Time

Programmable

Programmable switch-on time

switch-on time

If the machine is disconnected from the mains, the time has to be reset.

Precondition:

READY

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

appears on the display.

appears.

TIME

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

--:--

appears on the display.

Ä L Turn the Rotary Switch to set the hour. M l Press the Rotary Switch to confirm the hour setting. Ä L Turn the Rotary Switch to set the minutes. M l Press the Rotary Switch to confirm the minute setting.

appears briefly on the display.

OK TIME

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programming mode.

READY

The programmable switch-on time is deactivated in the basic setting and can only be set when the time is set.

The programmable switch-on only works when the machine

is switched on at the power switch

e (standby).

7 Permanent settings in programming mode

Programmable auto-

Programmable automatic switch-off time

matic switch-off time

Precondition:

READY

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

appears on the display.

RINSE

UNIT ON

appears.

M l Press the Rotary Switch to enter the programme item.

--:--

appears on the display.

appears briefly on the display.

OK UNIT ON

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programming mode.

READY

You can save energy with the programmable switch-off function of your IMPRESSA.

The basic setting for the programmable automatic switch-off

time is 5 hours. This means that the device switches off automatically 5 hours after it is used last. The programmable automatic switch-off time can be adjust-

ed between 0.5 and 15 hours or deactivated.

Example: To change the programmable automatic switch-off time from 5 hours to 10, proceed as follows: Precondition:

READY

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

appears on the display.

RINSE

OFF AFTER

appears.

M l Press the Rotary Switch to enter the programme item.

appears on the display.

5 H

Ä L Turn the Rotary Switch until

10 H

is displayed.

M l Press the Rotary Switch to confirm the setting.

Once the setting is programmed, display.

OFF AFTER

appears briefly on the

7 Permanent settings in programming mode

Units amount of water/

Units amount of water/ time format

time format

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programming mode.

READY

The unit for the amount of water is set in the factory. You can set the unit for the amount of water to

The time format is set in the factory. You can set the formats

24 HRS

Example: To change the unit for the amount of water from

Precondition:

AM/PM

, proceed as follows.

READY

appears on the display.

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

or OZ.

DISPLAY

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

ML/OZ

To change the time format, turn the Rotary Switch until

24H/AM PM

is displayed.

M l Press the Rotary Switch to enter the programme item.

Ä L Turn the Rotary Switch until

appears.

M l Press the Rotary Switch to confirm the setting.

appears briefly on the display.

OK ML/OZ

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programme item.

DISPLAY

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programming mode.

READY

7 Permanent settings in programming mode

Language Language

You set the language when you used the machine for the first time.

You can choose among the following languages.

German

English

French

Italian

Dutch

Example: To change the language from

FRANCAIS

Precondition:

proceed as follows.

READY

appears on the display.

ENGLISH

M l Keep the Rotary Switch pressed until Ä L Turn the Rotary Switch until

LANGUAGE

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

ENGLISH

Ä L Turn the Rotary Switch until

FRANCAIS

appears.

M l Press the Rotary Switch to confirm the setting.

appears briefly on the display.

OK LANGUE

Ä L Turn the Rotary Switch until

EXIT

appears.

M l Press the Rotary Switch to exit the programming mode.

appears on the display.

PRET

8 Maintenance 8 Maintenance

8 Maintenance

Your IMPRESSA has the following integrated maintenance programmes:

Rinse machine

Changing the filter

Clean machine

Descale machine

Clean or descale the machine or change the filter whenever

the appropriate indicator is lit up.

Maintenance tipsMaintenance tips

Rinse machine

To ensure that you get many years’ reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the machine requires daily maintenance.

You should proceed as follows:

Empty the coffee grounds container and the drip tray. Rinse

them with warm water. Rinse the water tank with clean water.

Dismantle and rinse the Professional Cappuccino Frother (see

Chapter 8, ‘Maintenance – Rinsing the Professional Cappuccino Frother’). Wipe the surface of the machine with a damp cloth.

When your IMPRESSA has been switched on, after heating up, a prompt to rinse appears and the maintenance button To initiate the rinse operation, press the maintenance button.

When the IMPRESSA is switched off, a rinse operation is automatically initiated.

h lights up.

8 Maintenance

Changing the filter Changing the filter

Change following a promptChange following a prompt

Precondition:

READY

Place a receptacle under the coffee spout.

M l Keep the Rotary Switch pressed until

appears on the display.

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

RINSE

M l Press the Rotary Switch to initiate the rinse operation.

RINSING

is now ready for use.

After 50 litres of water have flowed through, the filter will

cease to work. Your IMPRESSA will automatically prompt you to replace the filter. After two months, the filter will cease to work. Monitor the

elapsed time as shown on the date plate on the cartridge holder. If the CLARIS plus filter cartridge is not activated, you will not

be prompted to change the filter.

To change the CLARIS plus filter cartridge when prompted to do so by your IMPRESSA, proceed as follows:

Precondition: the maintenance button

, rinsing stops automatically and your IMPRESSA

FILTER / READY

appears on the display, and

h lights up.

h l Press the maintenance button.

CHANGE

Remove the water tank and empty it.

Open up the cartridge holder and remove the old CLARIS

plus filter cartridge and the extension piece. Stick the extension on top of a new CLARIS plus filter

cartridge. Insert the filter cartridge into the water tank with light

pressure. Close the cartridge holder. It will click into place audibly.

Fill the water tank with cold, fresh mains water and reinsert.

Place a receptacle (at least 500 ml) under the Professional

Cappuccino Frother.

Turn the selection lever of the nozzle to the STEAM

position

k .

h l Press the maintenance button.

FILTER RINSING

You can interrupt the filter rinsing at any time. To do this, press any button. The water may be slightly discoloured. This is not harmful to

health, nor does it affect the taste.

Filter rinsing stops automatically after approx. 500 ml.

HEATING

appears.

You can also try out ‘changing the filter’ online. Visit the

Knowledge Builder at www.jura.com.

appears on the display, and then

- Water will flow out at the nozzle.

8 Maintenance

READY

Manual filter changeManual filter change

You can initiate the ‘Changing the filter’ operation manually.

Precondition: The filter is activated and display.

READY

M l Keep the Rotary Switch pressed until

appears on the

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

RINSE

Ä l Turn the Rotary Switch until

FILTER

appears.

M l Press the Rotary Switch.

CHANGE

Continue with the second prompt to take action

(indicated by a ‘Change following a prompt’.

l), as is described under

8 Maintenance

Clean machine Clean machine

CAUTIONCAUTION

Cleaning following a

Cleaning following a prompt

prompt

After 200 coffee preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it.

If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.

Use only original JURA care products.

The cleaning programme only lasts about 15 minutes.

Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so. JURA cleaning tablets are available from your stockist.

You can also try out the ‘Clean machine’ operation online. Vis-

it the Knowledge Builder at www.jura.com.

Precondition: the maintenance button

CLEAN / READY

h lights up.

appears on the display, and

h l Press the maintenance button.

EMPTY TRAY

Empty the drip tray and coffee grounds container and put

them back into the machine.

PRESS RINSE

Place a receptacle (at least 500 ml) under the coffee spout.

, the maintenance button h lights up.

h l Press the maintenance button.

CLEANING

The process is interrupted Open the cover of the filler funnel for pre-ground coffee.

- Water flows out of the coffee spout.

ADD TABLET

Insert a JURA cleaning tablet into the filler funnel.

Close the cover of the filler funnel.

PRESS RINSE

, the maintenance button h lights up.

h l Press the maintenance button.

CLEANING

Water flows out of the coffee spout several times. The process is interrupted Empty the drip tray and coffee grounds container and put

them back into the machine.

EMPTY TRAY

8 Maintenance

The cleaning operation is now complete. The IMPRESSA is ready for use again.

Manual cleaningManual cleaning

Descale machine Descale machine

CAUTIONCAUTION

You can initiate the ‘Cleaning the machine’ operation manually.

Precondition:

READY

M l Keep the Rotary Switch pressed until

appears on the display.

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

RINSE

Ä l Turn the Rotary Switch until

CLEAN

appears.

M l Press the Rotary Switch.

EMPTY TRAY

Continue with the second prompt to take action (indicated

l), as is described under ‘Cleaning following a prompt’.

The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it. The degree of calcification depends on the degree of hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this can cause irritation.

Avoid contact with the skin or eyes.

Rinse the descaling agent off with clean water. Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.

Use only original JURA care products.

CAUTIONCAUTION

If the descaling operation is interrupted, there may be damage to the machine.

Allow the descaling program to run to the end.

If the descaling agent comes into contact with sensitive surfaces, damage cannot be ruled out.

Clean up any splashes immediately.

8 Maintenance

The descaling programme lasts approx. 40 minutes.

o o

JURA descaling tablets are available from your stockist.

If you use a CLARIS plus filter cartridge and this is activated, you will not be prompted to change the filter.

You can also try out the ‘Descale machine’ operation online. Visit the Knowledge Builder at www.jura.com.

Descaling following a

Descaling following a prompt

prompt

Precondition:

and the maintenance button

DE-SCALE / READY

h lights up.

appears on the display,

h l Press the maintenance button.

EMPTY TRAY

Empty the drip tray and coffee grounds container and put

them back into the machine.

AGENT IN TANK

Remove the water tank and empty it.

Completely dissolve the contents of one blister (3 JURA des-

caling tablets) in a container that holds 500 ml of water. This may take several minutes. Pour the solution into the empty water tank and insert it in

the machine.

AGENT IN TANK

lights up. Remove the nozzle.

Place a receptacle (at least 500 ml) under the Connector

System

- The maintenance button h

h l Press the maintenance button.

DE-SCALING

This causes water to flow out of the Connector System©. The maintenance button blinks during the descaling operation. The operation stops automatically Empty the drip tray and coffee grounds container and put

them back into the machine. Empty the container under the Connector System

FILL WATER TANK

Rinse the water tank thoroughly and fill it with cold, fresh mains water.

EMPTY TRAY

Put the water tank back in.

PRESS RINSE

Place a container under the Connector System

- The maintenance button h lights up.

h l Press the maintenance button.

This causes water to flow out of the Connector System The operation stops automatically -

Empty the drip tray and coffee grounds container and put them back into the machine.

Replace the nozzle. The descaling operation is now complete. The IMPRESSA heats up and is ready for use again.

If the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

EMPTY TRAY

8 Maintenance

Manual descalingManual descaling

Rinse Professional

Rinse Professional Cappuccino Frother

Cappuccino Frother

You can initiate the operation ‘Descaling the machine’ manually.

Precondition: activated.

READY

M l Keep the Rotary Switch pressed until

appears on the display and the filter is not

RINSE

appears.

M l Press the Rotary Switch to enter the programme item.

RINSE

Ä l Turn the Rotary Switch until

DE-SCALE

appears.

M l Press the Rotary Switch.

EMPTY TRAY

Continue with the second prompt to take action (indicated

by a

l), as is described under ‘Descaling following a

prompt’.

To ensure that the Professional Cappuccino Frother works perfectly, you should rinse it with water after every milk preparation.

The IMPRESSA will not prompt you to rinse the Professional

Cappuccino Frother.

8 Maintenance

Clean Professional

Clean Professional Cappuccino Frother

Cappuccino Frother

Remove the milk pipe from the milk carton/bottle or the

milk container.

Fill the receptacle with 250 ml of fresh water and immerse the milk pipe in it.

Place a receptacle under the Professional Cappuccino Frother.

Turn the selection lever to the milk or milk foam position.

k l Press the steam button.

HEATING READY

k l Press the steam button again.

STEAM

Press any button as soon as clean water flows into the cup.

To ensure that the Professional Cappuccino Frother works perfectly, you should clean it daily when you have been preparing milk.

- The nozzle and pipe are rinsed.

CAUTIONCAUTION

If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.

Use only original JURA care products.

The IMPRESSA will not prompt you to clean the Professional

Cappuccino Frother. The JURA Auto-Cappuccino Cleaner is available from your

stockist.

You can also try out the ‘Clean Professional Cappuccino

Frother’ operation online. Visit the Knowledge Builder at www.jura.com.

Place a receptacle under the Professional Cappuccino

Frother. Pour 250 ml of fresh water into a container and add one

capful (max. 15 ml) of Auto-Cappuccino Cleaner. Immerse the milk pipe in the receptacle.

Turn the selection lever to the milk or milk foam

position.

k l Press the steam button.

HEATING READY

k l Press the steam button again.

STEAM

Ä l Turn the Rotary Switch until

display.

STEAM

Press any button as soon as the receptacle with the AutoCappuccino Cleaner is empty. Rinse the receptacle thoroughly, fill it with 250 ml of fresh

water and immerse the milk pipe in it.

- The nozzle and pipe are cleaned.

60 SEC

appears on the

k l Press the steam button. ä l Turn the Rotary Switch until

display.

STEAM

Press any button as soon as the receptacle with the water is empty.

- The nozzle and pipe are rinsed with fresh water.

60 SEC

appears on the

8 Maintenance

Disassemble

Disassemble Professional

Professional Cappuccino Frother

Cappuccino Frother

Carefully remove the Professional Cappuccino Frother from the Connector System

Disassemble the Professional Cappuccino Frother into its components.

Rinse all the nozzle parts thoroughly under running water.

Reassemble the Professional Cappuccino Frother and attach it to the Connector System The cleaning of the Professional Cappuccino Frother is finished.

8 Maintenance

Removing foreign

Removing foreign objects

objects

Even in the case of the best bean coffee, it can happen that foreign objects can be found in the beans. These can block the grinder.

g l Switch your machine off with the On/Off button. e l Switch your machine off at the power switch.

Open the cover of the bean container and remove the aroma

preservation cover. Remove the beans with a vacuum cleaner.

Loosen the screw in the bean container and lift up the

finger protection. Remove the remaining beans with a vacuum cleaner.

Apply the grinder key.

Turn the key counterclockwise until the jammed foreign

objects are released, and remove these. Put the finger protection down again and screw it back tight-

ly in place. Fill the bean container with coffee beans, then close the aro-

ma preservation cover and the bean container cover.

Cleaning the bean

Cleaning the bean container

container

Coffee beans may have a light layer of oil which remains on the walls of the bean container. These traces may negatively affect the coffee results. For this reason, clean the bean container from time to time.

Precondition:

FILL BEANS

is displayed.

g l Switch your machine off with the On/Off button. e l Switch your machine off at the power switch.

Open the cover of the bean container and remove the aroma preservation cover.

Descaling the water

Descaling the water tank

tank

8 Maintenance

Loosen the screw in the beam container and lift up the finger

protection.

Remove the remaining beans with a vacuum cleaner.

Clean the bean container with a soft, dry cloth.

Put the finger protection down again and screw it back tightly in place.

Fill the bean container with coffee beans, then close the aroma preservation cover and the bean container cover. The cleaning of the bean container is now complete.

The water tank may build up deposits of limescale. In order to ensure perfect working order, descale the water tank from time to time.

Remove the water tank.

If you use a CLARIS plus filter cartridge, remove this.

Descale the tank with a mild conventional descaling agent.

Rinse the water tank with clean water afterwards.

If you use a CLARIS plus filter cartridge, insert this again.

Fill the water tank with fresh water. Insert it again.

8 Maintenance

9 CLARIS plus filter cartridge – Water for perfect coffee

9 CLARIS plus filter cartridge – Water for perfect coffee9 CLARIS plus filter cartridge – Water for perfect coffee

As fresh as from the

As fresh as from the spring

spring

Anyone who has ever drunk fresh spring water knows: There is a world of difference between the elixir of life in its natural form and the processed fluid that comes out of our taps. Very few of us have ready access to a spring.

The answer to this is: CLARIS plus filter cartridge from JURA. It transforms the hardness of the mains water into pH-neutral water. On top of this, CLARIS plus can protect your fully automated coffee/ Espresso machine against scale, and used properly, can prolong the service life of your machine.

Our mains water is of very high quality and is excellent for drinking. It is subject to ongoing health checks, meets strict, legally binding quality requirements and contains the most important minerals and fluorides.

– always

Water – always

Water pleasant and freshly

pleasant and freshly filtered

filtered

Use of CLARIS plus filter cartridges guarantees you freshly filtered, delicious-tasting water for your tea and coffee at all times. Designed specially for JURA coffee machines, it has neutral pH and is placed directly in the water tank.

This gives you three important benefits:

The guarantee that your water is freshly filtered before any

cup of coffee is prepared; Fresh water and unadulterated aromas guarantee your palate

the coffee experience of a lifetime; Lifelong protection for your IMPRESSA (eliminating the need

for descaling). CLARIS plus from JURA is hard on scale, but soft on your coffee machine.

9 CLARIS plus filter cartridge – Water for perfect coffee

Quality knows no

Quality knows no compromises

compromises

You can see it at work on your household appliances every day. Left to its own devices, scale can cause serious damage. Over time, scale is deposited on the heating elements, clogging the heating elements and pipes. Scale is also detrimental to the quality of your chosen drinks because, with the passage of time, the water will no longer be properly heated. Consequently: The result is that the coffee will taste weaker, Espresso will lose its strength and tea will taste bland. In other words: All enjoyment will be lost.

Quality from A to ZQuality from A to Z

No more descalingNo more descaling

Interaction of organic

Interaction of organic materials

materials

When you buy coffee, Espresso or tea specialities, aren‘t you careful to buy top quality? In that case, you should insist on the same for your water. You will taste and smell the difference the moment you start using the CLARIS plus filter cartridge. The water will taste purer and you will be thrilled by the flavour of your coffee specialities.

If you use CLARIS plus filter cartridges regularly, you will be able to omit the time-consuming business of regular descaling. And your coffee machine will reward you with a longer service life. We recommend use of CLARIS plus wherever water is harder than 10° German hardness (dH). You can determine the water hardness before using your JURA coffee machine for the first time with the Aquadur® test strip included in the Welcome Pack.

The CLARIS plus filter cartridge was developed specially for JURA fully automatic coffee/Espresso machines. It contains a granulate consisting of ion exchangers and active carbon – in other words, pure, organic materials with no chemical additives. These agents work together to reduce the formation of calcium deposits, heavy metals and other harmful substances contained in mains water. Other substances detrimental to flavour and aroma, such as chlorine, are also largely eliminated. Minerals and fluorides contained in the water are, of course, retained.

Water freshly filtered

Water freshly filtered on the ‘just in time’

on the ‘just in time’ principle

principle

Unlike other water filtering systems for domestic use, CLARIS plus works according to the professional up-flow principle. Practically speaking: Only the precise amount of water required for a given beverage is drawn in, and this is filtered directly before use.

9 CLARIS plus filter cartridge – Water for perfect coffee

Up-flow principleUp-flow principle

Easy to operateEasy to operate

Economical in useEconomical in use

Maintenance and storageMaintenance and storage

The water flows through the filter at a constant speed, disturbing the granulate and ensuring that it is used evenly. This system ensures that the filter is used to optimum effect. The remaining water in the tank is left untouched until the next cup of coffee is made.

Inserting the CLARIS plus filter cartridge couldn‘t be easier. It is described in Chapter 2, ‘Preparing and using for the first time – Using and activating filter’.

After 50 litres of water have been dispensed or after two months at the latest, the filter will cease to work. After this, the cartridge must be replaced. Your JURA coffee machine will prompt you to change the filter.

This process is described in detail in Chapter 8, ‘Maintenance – changing the filter’.

You can return used filter cartridges to the stockist. They are returned for recycling to protect the environment.

The CLARIS plus filter cartridge only needs to be removed from the water tank if you are away for a lengthy period of time or if you wish to clean or descale the tank using a conventional product.

If you do plan to be away for some time (e.g. for a holiday), we recommend that you do the following to store the filter cartridge. Remove the cartridge from the water tank. Place it in a glass with about two centimetres of water and put it in the fridge.

We recommend that you run about half a litre of water through the machine before starting to make coffee again. The water could be discoloured, but this is not harmful to your health.

9 CLARIS plus filter cartridge – Water for perfect coffee

Safe handlingSafe handling

CLARIS plus filter cartridges should be kept out of the reach of

children.

Store them dry in the sealed package.

Protect them from heat and direct sunlight.

Do NOT use damaged CLARIS plus filter cartridges.

Do NOT open CLARIS filter cartridges.

Pictures on the next few pages:

Water – always pleasant and freshly filtered.

CLARIS plus filter cartridges do not require any accessories and do not

take up any extra space. They can be inserted directly into the water tank.

3 4

Water for perfect coffee specialities.

The professional up-flow principle: Only the precise amount of water required for a given beverage is drawn in, and this is filtered directly before use.

Stainless steel pipes in the heater element: With CLARIS plus (left) you can omit the time-consuming descaling operation (right).

The following substances are filtered out through the interaction with organic materials: calcium (Ca), chlorine (Cl), lead (Pb), copper (Cu), aluminium (Al).

6 7

10 ‘The milk makes the difference’ 10 ‘The milk makes the difference’

Coffee specialities are taking the entire planet by storm. Up until a few years ago, classics, such as Espresso and Café Crème were the most popular choices. Today, Cappuccino, Latte Macchiato & co. have well surpassed them.

Trendy specialities

Trendy specialities with milk

with milk

Most modern

Most modern technology

technology

More and more often, one finds milk among the ingredients of the trendy specialities. It doesn‘t matter whether whole milk or skim milk is used. It isn‘t the fat content which is crucial for the wonderful foam, but the protein. Heated or frothed, as cream or whipped cream, no other natural product is combined with coffee as often or with as much pleasure as milk. There is a wide variety of alternatives available to allergy sufferers as well: goat/sheep milk, rice milk or soy milk.

The most modern technology and ingenious Cappuccino nozzles —allow you to delve into the multi-faceted world of coffee specialities with every IMPRESSA. Here, the milk is not heated to above 75 °C. This is namely the only way that the inimitable fine foam can be fully developed.

10 ‘The milk makes the difference’

Frothing as done

Frothing as done by a professional

by a professional

Thanks to the variable brewing unit, which can prepare between 5 and 16 grams of coffee powder under ideal conditions, you can make sure that the tastes of the coffee and milk are harmoniously balanced. Simply allow your imagination to run free in creating new recipes and add flavour and fineness to your personal favourite coffee specialities according to your mood.

Make sure you try out the secret Barista tip: Because milk can form a vortex on the rough surface of a stainless steel pot especially well, perfect foam can be formed in these receptacles. And the professional also knows what must also be given special attention: Regularly and thoroughly clean the Cappuccino nozzle, rinse out the milk container well every evening and store the milk in the refrigerator overnight.

10 ‘The milk makes the difference’

11 Accessories and Service11 Accessories and Service

11 Accessories and Service

Machine accessories –

Machine accessories – extend your coffee

extend your coffee horizon

horizon

Professional Cappuccino

Professional Cappuccino Frother

Frother

Easy Cappuccino FrotherEasy Cappuccino Frother

2-stage frothing nozzle2-stage frothing nozzle

Hot water nozzleHot water nozzle

Coffee specialities made with milk are very fashionable these

days. The Connector System

and the wide range of accessories open the door to the world of trendy drinks. Any accessories that do not come supplied with your IMPRESSA can be obtained from authorised stockists.

Cappuccino, Latte Macchiato at the touch of a button - nothing could be easier with the Professional Cappuccino Frother. It draws milk in directly from the container, heats it up, froths it and delivers perfect milk foam for the ultimate Cappuccino experience, or warm milk for your Latte Macchiato.

The Easy Cappuccino Frother provides milk foam at the touch of a button. It is compatible with the Connector System

. When steam is drawn, a negative pressure is created and this draws milk from the container. Every Cappuccino is made successfully in this way.

The 2-stage frothing nozzle is suitable for heating and frothing

drinks.

The hot water nozzle provides an even jet of water.

Stainless steel vacuum

Stainless steel vacuum milk container

milk container

Deluxe milk containerDeluxe milk container

The high-quality stainless steel vacuum milk container holds

0.6 litres and keeps the milk cool throughout the day.

In the attractive chrome steel design, the milk is suitably attired.

The container holds 0.6 litres.

11 Accessories and Service

Care products Care products

CLARIS plus filter

CLARIS plus filter cartridge

cartridge

Cleaning tabletsCleaning tablets

Descaling tabletsDescaling tablets

Auto-Cappuccino CleanerAuto-Cappuccino Cleaner

Original JURA care products are optimally tailored to the maintenance programmes. You should therefore use only original JURA care products. Your IMPRESSA will thank you for it.

The CLARIS plus filter cartridge was developed specially for JURA coffee machines. It is placed directly into the water tank. CLARIS plus works according to the professional up-flow principle.

Further information on this subject can be found in Chapter 9, ‘CLARIS plus filter cartridge – water for perfect coffee’.

Your IMPRESSA machine comes with an integrated cleaning programme. The original JURA cleaning tablets are specifically tailored for the machine and optimally dissolve accumulated coffee oils.

Scale is the biggest enemy of all household appliances that involve the use of mains water. JURA has developed a descaling tablet for the IMPRESSA which removes scale and at the same time is easy on your machine.

Clean your Professional Cappuccino Frother and Easy-Cappuccino Frother with the original Auto-Cappuccino Cleaner from JURA. This will ensure that it is 100% clean.

Service Service

Competent, high-quality service is a top priority as far as JURA is concerned, irrespective of whether it is provided by the glassy service factory of the Swiss parent company or in the authorised JURA service centres all around the world.

Every IMPRESSA service is preceded by an electronically controlled diagnostic run.

Service work is performed competently and professionally by JURA‘s trained technicians.

3 4 5

6 7

11 12

12 Messages on plain text display

Message Cause Action

EMPTY TRAY

FILL WATER TANK

EMPTY GROUNDS

TRAY MISSING

FILL BEANS

CLEAN

DE-SCALE

FILTER

The drip tray is full.You cannot prepare any coffee or hot water or milk products.

Water tank is empty. You cannot prepare any coffee specialities or hot water or milk products.

The coffee grounds container is full. You cannot prepare any coffee specialities, but you can prepare hot water or milk.

The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any coffee specialities or hot water or milk products.

Bean container is empty. You cannot prepare any coffee specialities, but you can prepare hot water or milk.

The IMPRESSA is prompting you to clean it.

The IMPRESSA is prompting you to descale it.

The CLARIS plus filter cartridge is used up.

l Empty the drip tray.

l Fill the water tank (See

Chapter 2, ‘Preparing and using for the first time – filling the water tank’).

l Empty the coffee grounds

container and the drip tray.

l Insert the drip tray. l Clean the metal contacts on

the back of the drip tray.

l Fill the bean container

(See Chapter 2, ‘Preparing and using for the first time – filling the bean container’).

l Clean the machine (See

Chapter 8, ‘Maintenance – cleaning the machine’).

l Descale the machine (See

Chapter 8, ‘Maintenance – cleaning the machine’).

l Change the CLARIS plus filter

cartridge (See Chapter 8, ‘Maintenance – changing the filter’).

12 Messages on plain text display

Message Cause Action

CLOSE COVER

NOT ENOUGH PRE-GROUND

TOO HOT

The cover for pre-ground coffee is open.

There is too little pre-ground coffee in the filler funnel. The IMPRESSA stops the operation.

System is too hot to begin a maintenance programme.

l Close the cover for

pre-ground coffee.

l The next time you prepare

coffee, fill in more pre-ground coffee (see Chapter 5, ‘Preparation at the touch of a button – pre-ground coffee’).

l Prepare a coffee speciality or

hot water.

13 Troubleshooting

Problem Cause Action

Grinder is making a very loud noise.

The frother does not produce enough milk foam.

Coffee only comes out in drips when it’s being prepared.

Water hardness cannot be adjusted.

FILL BEANS

displayed although the bean container has been filled.

FILL BEANS

displayed although the bean container is empty.

EMPTY TRAY

displayed.

is not

is always

FILL WATER TANK

is displayed although the water tank is full.

There are foreign objects in the grinder.

The Professional Cappuccino Frother is dirty.

Coffee or pre-ground coffee has been ground too finely and is blocking the sieve.

CLARIS plus filtercartridge is now activated.

The grinder is not yet completely filled with beans.

The bean monitor is dirty.

The metal contacts of the drip tray are dirty or wet.

The water tank float is stuck.

l Remove the foreign objects

(see Chapter 8, ‘Maintenance – Removing foreign objects’).

l Clean the Professional Cappuccino

Frother (see Chapter 8, ‘Maintenance – Rinsing the Professional Cappuccino Frother’).

l Put the grinder on a coarser setting or

use coarser pre-ground coffee (see Chapter 2, ‘Preparing and using for the first time – Adjusting grinder’).

l Deactivate the CLARIS plus filter

cartridge.

l Prepare a coffee speciality.

l Clean the bean container

(see Chapter 8, ‘Maintenance – Cleaning the bean container’).

l Clean the metal contacts on the back of

the drip tray.

l Descale the water tank (see Chapter 8,

‘Maintenance – Descaling the water tank’).

13 Troubleshooting

Problem Cause Action

ERROR 2

Other

ERROR

are displayed.

is displayed. If the device was

exposed to the cold for a long period of time, it is disabled from heating up due to safety reasons.

messages

–

l Warm up the device at room

temperature.

l Turn your IMPRESSA off at the power

switch. Contact Customer Support in your country (see Chapter 17, ‘JURA contact details’).

If you have not been able to solve the problem, contact Customer Support in your country. You will find the phone number in Chapter 17,

‘JURA contact details’.

14 Transport and environmentally neutral disposal

14 Transport and environmentally neutral disposal14 Transport and environmentally neutral disposal

Transport / Empty

Transport / Empty system

system

DisposalDisposal

Keep the packaging for your IMPRESSA. It is used to protect the machine during transportation.

In order to protect the IMPRESSA from frost during transportation, the system must be emptied.

Precondition: The IMPRESSA must be switched off (standby).

Remove the water tank.

Place a receptacle under the nozzle.

h l Press the maintenance button until

displayed. Water will flow out a little bit at the nozzle. The operation stops automatically. The IMPRESSA will switch itself off.

EMPTYING

e l Turn your IMPRESSA off at the power switch.

The next time you use the machine, you will need to refill the system (see Chapter 2, ‘Preparing and using your IMPRESSA for the first time – First-time use’).

Please dispose of old machines in an environmentally neutral way. Old machines contain valuable materials capable of being recycled which should be salvaged for recycling. Please therefore dispose of old machines via suitable collection systems.

15 Technical data

15 Technical data15 Technical data

Technical dataTechnical data

The voltage and current vary according to the safety test.

Please observe the rating plate before connecting the device.

Voltage

Safety test

Power

Power consumption

230 V AC, 50 Hz 120 V AC, 60 Hz 220 – 240 V AC, 50 Hz 220 V AC, 50 Hz

1450 W 12 W/h

SAVE -

Power consumption

7 W/h

SAVE √

Pump pressure Static max. 15 bar

Holding capacity of water tank

Holding capacity of bean container

Holding capacity of coffee grounds container

Cable length Approx. 1.1 m Weight 10.75 kg Dimensions (W x H x D) 28.5 x 34.2 x 43.3 cm

2.1 l

250 g

Approx. 16 servings

Rating plateRating plate

15 Technical data

Please only plug the machine into the power supply according

to the technical data, which you can find on the rating plate. The rating plate is located on the bottom of your IMPRESSA.

The information shown on this should be interpreted as follows:

V AC = alternating current in volts

W = power output in watts

This product complies with all applicable EU directives.

This product meets the requirements of the Decree concern-

ing Low Voltage Electrical Products and the Decree concerning Electromagnetic Compatibility (VEMV). This product complies with all the pertinent ESTI requirements (Swiss Federal Inspectorate for Heavy Current Installations)

This product complies with all applicable UL directives

(Underwriters Laboratories Inc.®).

This product complies with all applicable SAA directives

(Standards Association of Australia).

This product complies with all applicable CCC directives

(China Compulsory Certification).

16 Key technologies

16 Key technologies and products16 Key technologies and products

Intelligent Pre Brew Aroma System (I.P.B.A.S.©). Perfect coffee is no accident. The Intelligent Pre Brew Aroma System produces the very best in flavour from every coffee blend and roast.

The freshly ground coffee beans are delivered to the infusing cylinder as a powder from the grinder.

There it is optimally compressed.

Prior to brewing, the powder is moistened. The pores swell and the flavours are released.

During brewing, perfect coffee is delivered to the cup, crowned by a velvety, soft crema for perfect enjoyment.

The IMPRESSA range of products includes the following series:

IMPRESSA Z series, Cappuccino at the touch of a button, pre-

mium professional technology for domestic use. IMPRESSA S series for demanding households

IMPRESSA J series, Perfect Enjoyment, Perfect Aesthetics

IMPRESSA F series, simple operation, multi-winner

IMPRESSA C series, Click & Drink

IMPRESSA X series for catering and office applications

Obtain the advice of the JURA experts.

You will find the purchase advisor at www.jura.com.

For perfect coffee quality it is important to get the grinding right. To this end, a powerful 6-level powerful conical burr grinder with grinding cones constructed out of hardened steel is provided.

The variable brewing unit holds between 5 and 16 g of coffee. This means that two cups can be prepared at once in a single brewing operation.

Durable pipes constructed from a high-quality steel alloy conduct the water through the thermoblocks where it is heated to the correct temperature.

1b1a

1d1c

IMPRESSA Z

IMPRESSA S

IMPRESSA J

IMPRESSA F

IMPRESSA C

IMPRESSA X

IMPRESSA XF

4 5

17 JURA contact details

Australia

Global Coffee Solutions Pty Ltd

Customer Service Phone +61 1300 552 883

Opening Hours Monday to Friday

Distributor Address/ Service Address

Fax +61 0242 846 099 E-mail info@globalcoffee.com.au

8:00 am – 5:00 pm

Global Coffee Solutions Pty Ltd 5/77 Jardine Street Fairy Meadow NSW 2519

Bangladesh

Please contact the Singapore office for details.

Brunei

Please contact the East Malaysian office for details.

Burma

Please contact the Singapore office for details.

Cambodia

Please contact the Singapore office for details.

Canada

Faema Canada

Customer Service Phone (416) 535-1555

Opening Hours Monday to Friday

Distributor Address/ Service Address

Toll free (877) 323-6226 Fax (416) 535-3843 E-mail espresso@faema.net

9:00 am – 6:00 pm Saturday 10:00 am – 5:00 pm

Faema Canada 672 Dupont Street, Suite 201 Toronto, Ontario M6G 1Z6

China

Shanghai HJ Coffee Co., Ltd.

Customer Service Phone +86 21 62940690 ext.31

Opening Hours Monday to Friday 09:00 – 17:30

Distributor Address/ Service Address

E-mail service@hjcoffee.com

Shanghai HJ Coffee Co., Ltd. Room D 3F, building one Xinhua Road No. 543 Shanghai 200052

Czech Republic

Petrarco, Spol. S R.O.

Customer Service Phone +420 775 997 557

Opening Hours Monday to Thursday 9:00 – 17:00

Distributor Address/ Service Address

E-mail dokladal@juraswiss.cz

Friday 9:00 – 15:00

Petrarco, Spol. S R.O. Udolni 5 602 00 Brno

Denmark

Scandinavian CoffeeSystem Aps

Customer Service Phone +45 7020 7333

Opening Hours Monday to Thursday 09:00 – 16:30

Distributor Address/ Service Address

Fax +45 7020 7343 E-mail service@coffeesystem.com

Friday 09:00 – 16:00

Scandinavian CoffeeSystem Aps Tordenskjoldsgade 19 1055 Kobenhavn K

17 JURA contact details

Estonia

Infomelton OÜ

Customer Service Phone +372 651 88 55

Opening Hours Monday to Friday 09:00 – 17:00

Distributor Address/ Service Address

+372 651 88 50

E-mail lavazza@lavazza.ee

Infomelton OÜ Weizenbergi 27 Tallinn 10150

Finland

Home Appliance Brokers HAB Oy

Customer Service Phone +358 207 300 090

Opening Hours Monday to Friday 08:00 – 16:00

Distributor Address Home Appliance Brokers HAB Oy

Service Address Monilaite-Thomeko Oy

E-mail info@haboy.fi

Elimäenkatu 29, 00510 Helsinki

Salpakuja 6, 01200 Vantaa

Greece

COFFEE CONNECTION S.A.

Customer Service Phone +30 210 66 40 640

Opening Hours Monday to Friday 09:00 – 17:00

Distributor Address/ Service Address

E-mail coffeeway@coffeeway.com

COFFEE CONNECTION S.A. Agiou Louka str. Peania Attica 190 02

Hong Kong PRC

Pacific Coffee Company Ltd

Customer Service Phone +852 2805 1627

E-mail sales@pacificcoffee.com

Opening Hours Monday to Friday

Distributor Address/ Service Address

9:00 am – 6:00 pm Saturday 9:00 am – 1:00 pm

Pacific Coffee Company Ltd 701–704 Hollywood Center 233 Hollywood Road, Sheung Wan

Iceland

Karl K. Karlsson

Customer Service Phone +354 540 9003

Opening Hours Monday to Friday 09:00 – 18:00

Distributor Address/ Service Address

Indonesia Bali

BHINEKA JAYA

Customer Service Phone +62 361 724746

Opening Hours Monday to Saturday 08:30 – 16:30

Distributor Address/ Service Address

Indonesia Jakarta

SUKSES PRATAMA JAYA P.T.

Customer Service Phone +62 21 6331177

Opening Hours Monday to Saturday 09:00 – 17:00

Distributor Address/ Service Address

E-mail karlk@karlsson.is

Karl K. Karlsson Pacific Coffee Company Ltd Skútuvogur 5, 104 Reykjavík

Mobile Nr. +62 81 23817951 or +62 361 7460521 E-mail vivi@kopibali.com

BHINEKA JAYA Jl. Pulau Moyo 9A, Denpasar, Bali

Fax +62 21 63857008 E-mail cs@suprajaya.com

Service Number during off hours: +62 21 6331177

SUKSES PRATAMA JAYA P.T. Jalan: K.H. Hasyim Ashari 125 Pusat Niaga Roxy Mas Blok C.4 No.14–15, Jakarta 10150

17 JURA contact details

Israel

J.Feffer l.t.d.

Customer Service Phone +972 353 350 38

Opening Hours Sunday–Thursday 08:00 – 18:00

Distributor Address/ Service Address

Fax +972 353 305 54 E-mail feffer-j@barak-online.net

Friday 09:00 – 13:00

J.Feffer l.t.d. 9,Simtat Ma‘ale Hachoma Ind. Zone Or-Yehuda 60370, Israel

Korea

HLI Company Limited

Customer Service Phone +82 234 522 127

Opening Hours Monday to Friday 09:00 – 18:00

Distributor Address/ Service Address

Fax Phone +82 345 229 50 E-mail wj_lee@hlikorea.com

HLI Company Limited 7floor, Sungwon Bldg Yeoksam-Dong, Kangnam-Ku Seoul

Labuan

Please contact the East Malaysian office for details.

Lativa

CREMA SIA

Customer Service Phone +371 7244082

Opening Hours Monday to Friday 10:00 – 17:00

Distributor Address/ Service Address

+371 26622888

E-mail crema@crema.lv

CREMA SIA Gertrudes 86, Riga, LV-1009

Lithuania

JSC Pretendentas

Customer Service Phone + 370 315 73442

Opening Hours Monday to Friday 09:00 – 18:00

Distributor Address/ Service Address

Mobile +370 650 84779 E-mail alma@pretendentas.lt

JSC Pretendentas 62161 Alytus, str. Ulonu 33

Malaysia, East

RICMAS Borneo Sdn. Bhd.

Customer Service Phone +60 88 456 100, –200

Opening Hours Monday to Friday 09:00 – 17:30

Distributor Address/ Service Address

Malaysia, West

RICMAS Peninsular Sdn. Bhd.

Customer Service Phone +6 03 4296 5989

Opening Hours Monday to Friday 09:00 – 17:30

Office Address/ Service Address

Fax +60 88 241 600 E-mail jura@ricmas-malaysia.com

Service Number during off hours: +60 16 830 60 83

RICMAS Borneo Sdn. Bhd. Unit # E3–8, 3rd Floor Block E, Plaza Tanjung Aru Jalan Mat Salleh, Tanjung Aru 88150 Kota Kinabalu, Sabah

Fax +6 03 4297 5636 E-mail jura@ricmas-malaysia.com

Service Number during off hours: 016 201 5789

RICMAS Peninsular Sdn. Bhd. 3A-1 Jalan Perubatan 3 Pandan Indah 55100 Kuala Lumpur

17 JURA contact details

New Zealand

Euro Espresso Ltd

Customer Service Phone +64 9 277 1334

Opening Hours Monday to Friday

Distributor Address/ Service Address

Fax +64 9 277 9375 E-mail info@euroespresso.co.nz

8.30 am – 5:00 pm

6 Mepal Place, Manukau City, Auckland PO Box 76–342, Manukau City, Auckland 1730

Norway

Black Cat Kaffe og Tehus AS

Customer Service Phone +47 22 06 29 90

Opening Hours Monday to Friday 08:30 – 16:30

Distributor Address/ Service Address

Fax +47 22 06 29 99 E-mail info@blackcatkaffeogtehus.no

Black Cat Kaffe og Tehus AS Aslakveien 20h, 0753 Oslo

Philippines

Pacific Continental Company Inc.

Customer Service Phone +63 2 551 3216

Opening Hours Monday to Friday 09:00 – 18:00

Distributor Address/ Service Address

Fax +63 2 831 8314 E-mail jura@conlinscoffee.com

Service Number during off hours: +63 916 5294052

Pacific Continental Company Inc. 2753 Park Avenue, Pasay City Metro Manila 1300

Puerto Rico

ProExpo CA Consultores S.A.

Customer Service Phone +506 234 7404

Distributor Address/ Service Address

Fax +506 253 5296 E-mail info@grupocapresso.com

ProExpo CA Consultores S.A. P.O. Box 75-2120 Calle Blancos, San Jose

Saudi Arabia

Saudi Marketing Solutions

Customer Service Phone +9661 201 2053

Opening Hours Saturday to Wednesday

Distributor Address P.O.Box 12679 Jeddah 21483

Service Address Aruba & Muhandis Musad

Singapore

RICMAS INTERNATIONAL Pte. Ltd.

Customer Service Phone +65 6562 8853

Opening Hours Monday to Friday 09:00 – 17:30

Office Address/ Service Address

Fax +9661 201 2056 E-mail info@sms-arabia.com

09:00 – 13:00 and 17:00 – 21:00

Al-Anqari Street Intersection, Riyadh

Fax +65 6562 8854 E-mail jura@ricmas.com

Service Number during off hours: +65 90210314

RICMAS INTERNATIONAL Pte. Ltd. 25 International Business Park German Center #01–57/58 Singapore 609916

100

Jura Capresso J5 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual