IMPRESSA E40
IMPRESSA E45
IMPRESSA E60
IMPRESSA E65
Instructions for use
5/05
Art. Nr. 62902
Jura Impressa E40/E45/E60/E65
English................................................................................................................ 5 – 19
= Note = Important = Tip
Jura Elektroapparate AG, CH-4626 Niederbuchsiten,
Internet http://www.juraworld.com
Fig. 1
Fig. 4
Fig. 7
Fig. 2
Fig. 5
Fig. 8
Fig. 3
Fig. 6
Fig. 9
1
2
Operating elements
Jura Impressa E40/E45/E60/E65
1 Water quantity switch
2 Powder coffee selection switch
3 Coffee key for 2 cups
4 Maintenance key (for functions such as: rinsing,
cleaning, de-scaling, filter)
5 Coffee key for 1 cup
6 ON/OFF switch
7 Display with symbols
8 Water tank with carrying handle
9 Height-adjustable coffee spout
10 Pre-ground coffee filler funnel
11 Cover for beam container
12 Selector switch for hot water/steam
13 Pivoting nozzle for hot water/steam
14 Frothing aid
15 Container for coffee grounds
16 Drip tray cover
17 Drip tray
7
8
9
10
11
12
13
14
15
16
17
6
5
4
3
2
1
5
Contents
Jura Impressa E40/E45/E60/E65
1. Description....................................................page 6
1.1 Symbols .................................................page 6
2. Safety instructions ..........................................page 7
2.1 Warnings................................................page 7
2.2 Safety precautions ....................................page 7
3. Preparation of the machine...............................page 7
3.1 Checking the mains voltage.........................page 7
3.2 Checking the fuse .....................................page 7
3.3 Filling the water tank ................................page 7
3.4 Adding coffee beans ..................................page 7
3.5 Adjusting the grinder.................................page 8
3.6 Adjusting the water hardness.......................page 8
3.7 Adjustable automatic switch-off ...................page 9
4. First start of operation ....................................page 9
4.1 Fill system with water ...............................page 9
5. Rinsing the machine........................................page 10
6. Adjusting the water quantity..............................page 10
7. Drawing off espresso/normal coffee .....................page 10
7.1 Drawing off espresso/strong coffee ................ page 10
7.2 Drawing off espresso/extra coffee .................page 10
7.3 Drawing off powder coffee ..........................page 10
8. Drawing off steam ..........................................page 11
8.1 Drawing off steam with the Profi-Auto-
Cappuccino/Caffè Latte (optional E45).................page 11
8.2 Return to stand-by .................................. page 11
9. Drawing off hot water......................................page 11
9.1 Drawing off hot water E45 .........................page 12
10. Switching machine off .....................................page 12
11. Care and maintenance......................................page 12
11.1 Fill water ...........................................page 12
11.2 Empty grounds container .........................page 12
11.3 No drip tray .........................................page 12
11.4 Clean unit ............................................page 12
11.5 Unit scaled...........................................page 12
11.6 Use of Claris filter cartridges ...................page 12
11.7 Insert filter ..........................................page 13
11.8 Replace filter........................................page 13
11.9 General cleaning instrictions.....................page 13
11.10 Empty system .......................................page 14
12. Cleaning .......................................................page 14
13. Decalcifying ..................................................page 15
14. Disposal .......................................................page 16
15. Tips for perfect coffee......................................page 16
16. Messages ......................................................page 17
17. Problems ......................................................page 18
18. Legal information ...........................................page 19
19. Technical data ...............................................page 19
E
6
Important information for the user
Thank you for choosing this Jura product.
Please study these instructions carefully before using your new
machine for the first time and keep them in a safe place for easy
reference in future.
Should you require further information or should particular
problems occur that are not dealt with in sufficient detail for you in
these operating instructions, please contact your local dealer or us
for the information you require.
1. Description
This fully automatic espresso/coffee machine impresses because of
its compactness and can prepare 1 or 2 cups of excellent, professional-quality espresso/coffee with guaranteed froth. The unique
Jura pre-brew system (Intelligent Pre Brew Aroma System
I.P.B.A.S
©
) ensures full use of the coffee aroma. The machine
works fully automatically at the push of a button. With the coffee
aroma, you have the choice between normal, strong and extra
strong, depending on taste. The integrated grinder grinds the beans
to the required fineness. A separate filler funnel makes it possible
to use additional, pre-ground sorts of coffee. The water quantity
can be set individually. Electronic filling controls for the water
tank and container for coffee grounds simplify operation. Thanks to
the integrated rinsing, cleaning and de-scaling programmes, care
and maintenance are also quick and easy.
1.1 Symbols
1 COFFEE READY
2 COFFEE POWDER
3 RINSE MACHINE
4 STEAM / HOT WATER
5 CLOSE TAP
6 FILL WATER
7 EMPTY GROUNDS CONTAINER /
DRIP TRAY MISSING
8 CLEAN MACHINE
9 MACHINE SCALED
10 REPLACE FILTER
11 OPEN TAP
1
2 3
4
5
109
11
76
8
7
2. Safety instructions
2.1 Warnings
Children are unaware of the dangers that electrical machines can
represent; for this reason, children should never be left unsupervised with electrical machines.
This machine should only be used by people who have read
these instructions.
Never use a faulty machine or one with a damaged power cable.
Never immerse the machine in water.
2.2 Safety precautions
Never subject the machine to the effects of the weather (rain,
snow, frost) and never operate it with wet hands.
Place your machine on a solid level surface. Never leave it on a
surface which is warm or hot (hob etc.). Choose a location which
is inaccessible for children or for pets.
Always pull the plug out if you are away for a long time (holi-
days etc.).
Always pull the plug out first before cleaning.
When pulling the plug out, never tug on the cord or on the
machine itself.
Never repair or open the machine yourself. All repairs should be
done by authorised service centres only using original Jura spare
parts and accessories.
The machine is connected to the mains power socket via an
electric cable. Make sure that nobody trips over it and pulls the
machine down. Keep children and pets well away from the
machine.
Never put the machine or even parts of it into the dishwasher.
Choose a place with a good circulation of air in order to prevent
the machine from overheating.
If you use de-scaling agents containing acid, remove any splas-
hes and drips on sensitive surfaces, in particular natural stone
and timber surfaces and/or take corresponding precautionary
measures.
3. Preparation of the machine
3.1 Checking the mains voltage
The machine is set to the correct voltage before leaving our
factory. Ensure that your mains voltage corresponds to the details
quoted on the rating plate attached to the bottom of the machine.
3.2 Checking the fuse
The machine is designed for a current of 10 Amps. Check that the
fuse used matches this.
3.3 Filling the water tank
Remove the water tank and rinse it out well with cold tap water.
Then fill the water tank and put it back into the machine. Ensure
that the tank engages properly (Fig. 1).
Only use fresh, cold water. Never fill with milk, mineral
water or other fluids. You can also add water without
removing the tank. Simply lift the lid up and pour in water
from above with a vessel. Close the lid again.
3.4 Adding coffee beans
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your Jura coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding
gear. Any repair costs resulting from the use of such blends
are not covered by warranty.
E
8
Lift up the cover of the bean container (11).
Clean out any dirt or foreign objects from the bean container.
Pour coffee beans into the bean container and close the cover
again.
3.5 Adjusting the grinder
You have the possibility of adjusting the grinder to the roast of
your coffee. We recommend the following:
for a light roast ➞ a finer adjustment
for a dark roast ➞ a coarser adjustment
Open the cover of the bean container.
To adjust the grinding, turn the selector switch (Fig. 2) to the
required position.
You have the following possibilities:
the smaller the dots, the finer the grinding
the larger the dots, the coarser the grinding
the degree of grinding should only be adjusted with the
grinder in operation.
3.6 Adjusting the water hardness
Water is heated inside the machine. This leads to calcium deposits
(scale) during use. This is automatically displayed.
Before you use your machine for the first time, you must adjust it
to the hardness of the local water. For this purpose, please use the
enclosed test sticks.
1° German water hardness corresponds to 1.79° French water
hardness.
The machine has 6 hardness settings to choose from. During the
setting, the water hardness selected is shown on the display.
Level for Claris Filter
Setting for the use of the Claris filter
cartridge.
Level 0 = water hardness is switched off
The automatic scale display is
switched off.
Level 1
German water hardness 1 – 7°
French water hardness 1.79 – 12.53°
Level 2
German water hardness 8 – 15°
French water hardness 14.32 – 26.85°
Level 3
German water hardness 16 – 23°
French water hardness 28.64 – 41.14°
Level 4
German water hardness 24 – 30°
French water hardness 42.96 – 53.7°
The machine is adjusted to hardness level 3 in the factory. You
can alter this setting by proceeding as follows:
9
Pull the plug and the feed wire out of the wire box on the back
of the machine.
Put the plug in.
Do not switch the machine on.
Press the draw-off key for about 3 seconds. Now, the
,
,,
symbols light up.
Now select the corresponding level with the draw-off key
and press the ON/OFF switch in order to save the setting.
The symbols go off.
The water hardness only need to be set before the first use of
the machine or if a different water quality is used.
If you do not carry out a change of level for longer than 30
seconds, the display goes off. The last figure you have stored
remains valid.
3.7 Adjustable automatic switch-off
You can amend the automatic switch-off time of 1 1/2 hours set by
Jura. The machine offers you three levels for this:
1st level
The symbol lights up. The automatic switch-off is not activated.
2nd level
The , , symbols light up.
The automatic switch-off is set to 1 1/2 hours.
3rd level
The , , , , , symbols light up.
The automatic switch-off is set to 3 1/2 hours.
In order to set or alter the automatic switch-off time, please
proceed as follows:
Connect the plug with the mains.
However, do not switch the machine on.
Please the draw-off key for about 3 seconds. The , ,
symbols light up.
Select the required level with the draw-off key.
Press the ON/OFF switch in order to save the required level.
If you do not carry out a change of level for longer than 30
seconds, the display goes off. The last figure you have stored
remains valid.
4. First start of operation
4.1 Fill system with water
Switch your machine on with the ON/OFF switch.
The symbol lights up.
Place an empty cup under the pivoting nozzle for hot water/
steam (13).
Switch the selector switch for hot water/steam (12) to the
position. The machine now lets off water and the symbol
flashes at the same time.
If the symbol lights up on the display, turn the selector
switch for hot water/steam (12) back to the position.
E
10
5. Rinsing the machine
When the symbol lights up, a rinsing process is demanded.
Place an empty cup under the coffee-spout.
Press the rinsing maintenance key (4). The rinsing process is
automatically ended.
If the machine has been switched off and has already cooled
down, the rinsing function will be demanded when the
machine is switched on.
A rinsing is automatically started when the machine is
switched off.
6. Adjusting the water quantity
The water quantity can be infinitely adjusted with rotary knob (1).
The small key means little water for espresso, the large cup means
a lot of water for coffee.
You can also change the water volume while coffee is being
drawn off. Simply turn the rotary knob (1) to give more or
less water.
With draw-off key , the machine automatically doubles
the water quantity and distributes it to 2 cups.
7. Drawing off espresso/normal coffee
As soon as the symbol lights up, you can draw off coffee.
Place 1 or 2 cups, as necessary, under coffee-spout (9) and press
the required draw-off key. The pre-brew system (I.P.B.A.S.
©
)
moistens the coffee powder, briefly interrupts the flow and then
starts the actual brewing process.
You can interrupt the draw-off prematurely by pressing any
of the coffee draw-off keys.
In order to obtain outstanding froth, you can adapt the
coffee-spout (5) individually to the size of your cups (Fig. 3).
7.1 Drawing off espresso/strong coffee
Place 1 cup under the coffee-spout (9).
Press the draw-off symbol until two dots light up to the left
of the symbol.
This draw-off of espresso / strong coffee is only possible for
1 cup.
7.2 Drawing off espresso/extra coffee
Place 1 cup under the coffee-spout (9) .
Press the draw-off symbol until three dots light up to the
left of the symbol.
This draw-off of espresso / extra coffee is only possible for
1 cup.
7.3 Drawing off powder coffee
Press the selector switch. The and symbols light
up.
Now put 1 or 2 level measuring spoons of pre-ground coffee into
the filler funnel for pre-ground coffee (10).
Place 1 or 2 cups under the coffee-spout (9) and press the
required coffee key.
Never use water-soluble instant coffee or quick coffee. We
recommend that you only use powder from freshly ground
coffee beans or pre-ground, vacuum-packed coffee. Never
put more than 2 portions of coffee in. The filler funnel is
not a storage container.
11
If the draw-off key is pressed by mistake, the selection
can be cancelled by pressing the draw-off key. Your
machine rinses.
After each cleaning operation the filler funnel for the 2nd
coffee type should be cleaned.
8. Drawing off steam
The steam can be used for heating liquids and also for frothing
milk for cappuccino. Make sure that the frothing aid (14) is pushed
upwards when heating liquids. When frothing liquids, push the
frothing aid downwards (Fig. 5).
Place a cup under the pivoting nozzle for hot water/steam (13).
Immerse the frothing aid (14) into the milk to be frothed or the
liquid to be heated and turn the selector switch for hot
water/steam (12) to the position.
Immediately after this, press the maintenance key (4).
When you have reached the required quantity of steam, turn the
selector switch for hot water/steam (12) back to the position .
The , symbols light up.
If you would like to draw off a coffee immediately after the
steam, please proceed as described in point 8.1.
The max. draw-off time is about 8 minutes.
A little water will come out first when frothing. It can be let
off before actually drawing off steam. The good result, e.g.
when frothing milk, is not influenced in any way.
At the start of a steam draw-off, there can be splashes. The
pivoting nozzle for hot water/steam gets hot. Please avoid
direct contact with the skin.
8.1 Drawing off steam with the
Profi-Auto-Cappuccino/Caffè Latte (optional E45)
The Profi-Auto-Cappuccino/Caffè Latte is optionally
available. Contact your authorized dealer.
8.2 Return to stand-by
Place a vessel under the pivoting nozzle for hot water/steam
(13).
Press a draw-off key, the symbol lights up on the display.
Turn the selector switch for hot water/steam (12) to the position
.
Draw water off until the flow of water is automatically inter-
rupted and the symbol lights up.
After this, turn the selector switch for hot water/steam (12) back
to the position.
After each steam draw-off, clean the pivoting nozzle with a
damp cloth.
9. Drawing off hot water
Place a cup under the pivoting nozzle for hot water/steam (13)
and turn the selector switch for hot water/steam (12) to the
symbol .
The machine now produces hot water.
To finish the process, turn the selector switch for hot water/
steam (12) back to the position.
At the start of a water draw-off, there can be splashes. The
pivoting nozzle for hot water/steam gets hot. Please avoid
direct contact with the skin.
E
12
11.3 No drip tray
If the symbol flashes, the drip tray has not been inserted
properly.
If the drip tray has not been put into the machine, you can
clean the interior of the machine. Wipe out any coffee
powder that might be in the machine with a damp cloth. Put
the drip tray back in again.
11.4 Clean unit
After 200 draw-offs or 160 rinses, the machine must be cleaned;
the symbol flashing announces this. You can continue to draw
off coffee or hot water/steam. We recommend carrying out the
cleaning (as described in point 12) within the next few days.
Warning lamp does not go out until the complete cleaning
prozess has been carried out.
11.5 Unit scaled
Scale is caused by using the machine and depends upon the hardness level
of your water. The machine recognises the necessity of de-scaling. Here
too, the flashing symbol tells you when de-scaling is necessary.
You can continue to draw off coffee or hot water/steam. We recommend carrying out the de-scaling (as described in point 13)
within the next few days. Warning lamp does not go out until
the complete decalcifying prozess has been carried out.
11.6 Use of Claris filter cartridges
If the Claris filter cartridges are used correctly, your machine no
longer needs de-scaling. You can obtain more information from the
brochure “Claris. Hard on scale. Gentle to your coffee machine.”
(enclosed in the welcome pack).
9.1 Drawing off hot water E45
Install the hot water nozzle to optain perfect water flow. This
is included in your Welcome Pack.
10. Switching machine off
When the machine is switched off, the rinsing programme is automatically started. Therefore, place an empty container under the
coffee-spout and press the ON/OFF switch.
When the rinsing water has run into the cup, the machine switches
off. Throw the rinsing water away.
11. Care and maintenance
11.1 Fill water
When the display lights up, no drawing-off is possible. Fill
with water as described under point 3.3.
11.2 Empty grounds container
The grounds container collects the coffee grounds. When this display lights up, no drawing-off is possible and the grounds
container must be emptied.
Push the coffee spout (9) up.
Remove the drip tray. Be careful, as there is water in it.
Empty and clean the drip tray and the grounds container (Fig. 6).
Push the drip tray and then the grounds container back in
(Fig. 7).
The drip tray must also be emptied when you empty the
grounds.
13
11.7 Insert filter
Pull up the cartridge holder in the water tank. Pressing gently,
put the filter cartridge into the water tank (Fig. 4).
Close the cartridge holder until it engages audibly.
Fill the water tank with cold fresh tap water and put it back into
the machine.
Switch the machine off with the ON/OFF switch.
Press the draw-off key for about 3 seconds. The degree of
hardness set appears on the display.
Press the draw-off key until only the symbol is still
alight.
Press the ON/OFF switch as a confirmation. The ,
symbols light up.
Place a sufficiently large vessel under the pivoting nozzle for hot
water/steam (13) and turn the selector switch for hot water/
steam (12) to the position .
Draw off water until the symbol lights up.
Now turn the selector switch for hot water/steam (12) back to the
position .
When the symbol lights up, press the maintenance key (4).
Your machine rinses and is ready for drawing off coffee.
The water can be slightly discoloured (not dangerous to
health)
11.8 Replace filter
After 50 litres have been drawn off, the filter loses its effect.
The symbol flashes to inform you.
If you do not draw off often, you should replace the filter
cartridge every 2 months, but no report appears on the display. There is a special disk on the cartridge holder so that
you can set the replacement date.
Switch your machine off with the ON/OFF switch.
Press the maintenance key (4) for about 3 seconds. The ,
symbols light up.
Empty the water tank and lift up the cartridge mounting.
Pressing gently, put the new filter cartridge into the water tank
(Fig. 4)
Place a sufficiently large vessel under the pivoting nozzle for
hot/water steam (13) and turn the selector switch for hot
water/steam (12) to the position . The symbol flashes.
Draw off water until the symbol lights up.
Now turn the selector switch for hot water/steam (12) back to the
position .
When the symbol lights up, press the maintenance key (4).
Your machine rinses and is ready for drawing off coffee.
11.9 General cleaning instructions
Never use abrasive articles or corrosive chemicals to clean your
machine.
Wipe down the casing on the inside and out using a soft, damp
cloth.
Clean the pivoting nozzle for hot water/steam after each use.
After heating milk, draw off a little hot water in order to clean
the inside of the pivoting nozzle.
You can take off the frothing aid for a thorough cleaning
(Fig. 8).
The water tank should be rinsed out and filled with clean water
every day.
If there is scale visible in the water tank, you can remove it
with a customary de-scaling agent. Remove the water tank
from the machine for this purpose.
E
14
11.10 Empty system
This procedure is necessary in order to protect the machine
from damage by frost in transport.
Switch the machine OFF with the ON/OFF switch.
Place a vessel under the pivoting nozzle for hot water/steam
(13).
Turn the selector switch for hot water/steam (12) to position .
Switch your machine back on again with the ON/OFF
switch. The symbol lights up.
Press the maintenance key until the symbol flashes. .
Draw steam off until the flow of steam is automatically inter-
rupted and the symbol lights up on the display.
After this, turn the selector switch for hot water/steam (12) back
to the position.
12. Cleaning
The machine has an integrated cleaning programme.
If the machine needs cleaning, the symbol flashes.
You can continue to draw off coffee or hot water/steam and
run the cleaning programme later.
Only use Jura cleaning tablets. They are available from your
Jura dealer.
You must not interrupt the cleaning programme once it has
started.
Switch your machine on with the ON/OFF key.
Press the maintenance key (4) for about 3 seconds. The (only
when necessary), , symbols light up.
Fill the water tank.
Empty the drip tray and the grounds container and put both of
them back in again. The (only when necessary), symbols
go off and the symbol appears.
Please a vessel under the coffee spout (9) and press the mainten-
ance key (4). The symbol goes off.
The symbol lights up to inform you that the cleaning process
has been activated.
If the symbol lights up, empty the drip tray (if necessary) and
put it back in again. The symbol goes off and the , ,
symbols light up.
Now put a Jura cleaning tablet into the filler funnel for powder
coffee (10) (Fig. 9).
Press the maintenance key (4). The , symbols go off.
The cleaning process is continued. This is displayed by the
symbol lighting up.
If the symbol lights up again, empty the drip tray (if neces-
sary), wait for about 10 seconds before putting it back in again.
The symbol goes off and the , symbols light up.
Place a vessel under the coffee spout (9) again and press the
maintenance key (4).
The cleaning process is continued. This is displayed by the
symbol lighting up. As soon as it has been completed, the
symbol lights up.
Empty the drip tray and the grounds container and put both of
them back in. The symbol lights up.
After each cleaning operation the filler funnel for the 2nd
coffee type should be cleaned.
15
E
13. Descalcifying
The machine has an integrated de-scaling programme. If you use a
Claris filter cartridge, your machine does not need de-scaling. Only
use Jura cleaning tablets. They are available from your Jura dealer.
If the machine needs de-scaling, the symbol flashes.
You can continue to draw off coffee and hot water/steam and
then run the de-scaling programme later.
Only run the de-scaling programme when the machine has
been switched off for at least 2 hours and has cooled down
well. The de-scaling programme is started with the machine
switched off. Once it has started, the de-scaling programme
must not be interrupted.
Switch your machine off with the ON/OFF switch and leave
it to cool down for 2 hours.
Remove the water tank and empty it.
Press the maintenance key (4) for about 3 seconds. The ,
symbols light up.
Empty the drip tray and the grounds container and put both of
them back in again. The symbol goes off and the ,
symbols light up.
Completely dissolve the contents of one blister (2 tablets) in 0.5
litres of water in a vessel and pour the mixture into the water
tank. Put the tank back in again. The symbol appear.
Turn the selector switch for hot water/steam (12) to the position
. The symbol go off and the , symbols light up.
Place a sufficiently large vessel under the pivoting nozzle for hot
water/steam (13) and press the maintenance key (4).
The lighting of the symbol and the flashing of the symbol
show you that the de-scaling process has been activated.
If the symbol lights up, empty the drip tray (if necessary) and
put it back in again. The symbol lights up.
Turn the selector switch for hot water/steam (12) back to the
position .
The de-scaling process is continued de-scaling solution is guided
into the drip tray in the interior of the machine.
The , , symbols light up.
Rinse the water tank out well and fill it with cold fresh
tap water. Then put it back into the machine again. Place a
sufficiently large vessel under the pivoting nozzle.
Empty the drip tray and put it back in again. The , symbols
light up.
Turn the selector switch for hot water/steam (12) to position .
Place a sufficiently large vessel under the pivoting nozzle for hot
water/steam (13) and press the maintenance key (4).
The lighting of the symbol and flashing of the symbol show
you that the de-scaling process has been activated.
If the , , symbols light up, empty the drip tray (if neces-
sary) and put it back in again.
Turn the selector switch for hot water/steam (12) back to the
position .
The de-scaling process is continued and the water is guided into
the drip tray in the interior of the machine.
If the symbol lights up, empty the drip tray and put it back in
again. The symbol appear.
After this, press the maintenance key (4). Your machine rinses
and is now ready for the next draw-off of coffee.
16
14. Disposal
For correct disposal, you should return your coffee machine to your
dealer, your Jura service centre or the firm of Jura.
15. Tips for perfect coffee
Height-adjustable coffee-spout
You can adjust the coffee-spout to the size of your cups
Grinding
See point 3.5
Pre-warming cups
You can pre-warm the cups with hot water or steam. The smaller
the amount of coffee, the more important the pre-warming.
Sugar and cream
Heat is lost by stirring the contents. Adding milk or cream from the
fridge considerably lowers the temperature of the coffee.
17
E
16. Messages
Display Cause Action
– System empty – Fill system (see point 4.1)
– System too hot after drawing off steam – Reset to coffee stand-by
– Wrong position of selector switch – Put selector switch into correct position
– General troubles 1. – Switch off
– disconnect from mains
– connect to mains
– switch machine on
2. Have machine examined by Jura service
centre
– Machine needs rinsing Rinsing the machine
– The tank is empty – Fill with water
– Floater defective – Rinse out or de-scale water tank
– Grounds container full – Empty grounds container
– Tray replaced too early after emptying – Only replace the tray after about 10 sec.
18
Display Cause Action
– Drip tray not inserted properly or missing – Insert correctly
– Cleaning necessary – Carry out cleaning process
– De-scaling necessary – Carry out de-scaling process
– Replacing of filter – Run program
17. Problems
Problem Cause Action
Coffee flow is stopped – bean container empty – Fill with beans
after pre-brewing
– not enough coffee powder – Correct amount of powder
Grinder is very noisy – foreign body in grinder – Drawing off coffee with pre-ground powder
– is still possible
– Have machine examined by Jura service centre
flash
flash
flash
flash
19
E
18. Legal information
These operating instructions contain the information necessary for
the correct use, operation and maintenance of the machine.
Understanding of and complying with the directions contained in
these operating instructions are essential for use of the machine
without risk and for safety in operation and maintenance.
The operation instructions cannot cover every imaginable example
of use. The machine has been designed for use in private households.
We would further like to point out that the contents of these operating instructions in no way constitute a part or, nor do they alter
any previous or existing contract, assurance or legal relationship.
All obligations on the part of Jura Elektroapparate AG result from
the purchase contract in question, which also contains full details
of the only warranty regulations applying to this machine. These
contractual warranty terms are neither extended nor limited by the
information given in these operating instructions.
The operating instructions contain information protected by copyright. Photocopying or translating into another language shall not
be admissible without prior written approval by Jura Elektroapparate AG.
19. Technical data
Voltage: 230V AC
Output: 1350 W
Fuse: 10 A
Safety check:
Energy consumption standby: approx. 4Wh
Energy consumption ready to
make coffee: approx. 17Wh
Pump pressure: max. 15 bar
Water tank: 1,9 litres
Capacity, bean container: 200 gr.
Capacity, grounds container: max. 16 port.
Cable length: 1,1 m
Weight: 8,3 kg
Dimensions (B x H x D): 28 x 34,5 x 41,5 cm
The machine complies with the following EU directives:
73/23/EWG dated 19/02/1973 “Low Voltage Directive” including
Modification Directive 93/336/EWG
89/336/EWG dated 03/05/1989 “EMC Directive” including
Modification Directive 92/31/EWG
Problem Cause Action
Not enough froth when – frothing aid blocked – clean frothing aid
frothing milk
– frothing aid in wrong position – draw off steam (see point 8)
If the above mentioned messages and/or problems still exist, please contact your dealer or get in touch directly with Jura Elektroapparate
AG.
Loading...