Jura IMPRESSA X5 User Manual

Cleaning the One Touch Cappuccino-Frother

In addition to using the cappuccino cleaning system, you should

also remove the One Touch Cappuccino-Frother regularly and rinse

it under running water.

Remove the One Touch Cappuccino-Frother from the

IMPRESSA X5

Dismantle frother

Rinse all parts of the frother under running water

Reassemble the frother and reattach to machine

08/04

Coffee in its most perfect
form – IMPRESSA X5
Getting started

Using the machine for the first time Inserting the filter (when using machine for first time)

Switch on mains switch

Press operating button

Fill water tank

Fill bean container

Turn Rotary Switch until desired language appears

Press Rotary Switch to confirm selection

Turn Rotary Switch to set time in hours

Press Rotary Switch to confirm hours

Turn Rotary Switch to set time in minutes

Press Rotary Switch to confirm minutes

Maintenance key lights up

Place one container each under the hot water dispenser and

One Touch Cappuccino-Frother

Press maintenance key

System fills automatically

Place container under coffee dispenser

Press maintenance key

The pipes are rinsed with fresh water

The machine is now ready for use.

After being used for the first time, the machine must be left

switched on for at least 24 hours.

Press Rotary Switch until

FILTER NO

appears

Press Rotary Switch again to enter this point of the program

Turn Rotary Switch until

FILTER YES

appears on the display

Press Rotary Switch to confirm setting

Remove water tank and empty

Open cartridge holder

Fix extension piece in position on top of CLARIS plus

filter cartridge

Use gentle pressure to insert filter cartridge in water tank

Close cartridge holder (it clicks audibly into place)

Fill water tank

Position container (at least ½ litre) under One Touch

Cappuccino-Frother

Press maintenance key

Filter rinse stops automatically

The machine is ready for use