Jura E60, E6 User Manual

E6/E60 – Quick Reference Guide

E6/E60 – Quick Reference Guide

E6/E60 – Quick Reference Guide

J

These short instructions do not replace the ‘E6/E60 Instructions for
Use’. Make sure you read and observe the safety information and
warnings first in order to avoid hazards.

Rinsing the machine

Rinsing the fine foam
frother

You can start coffee system rinsing manually at any time.

Precondition: The start screen is displayed.

T Place a receptacle under the coffee spout.
T Press the ‘ c ’ button (white Maintenance symbol).
T Press the ‘Rinse the coffee system’ button to start the rinse

operation.

‘Machine is rinsing’, water flows out of the coffee spout. The

operation stops automatically. The start screen is displayed.

After each milk preparation, the JURA prompts you to perform a milk
system rinse.

Precondition: ‘Rinse the milk system’ is displayed.

T Place a receptacle under the fine foam frother.
T Press the ‘ c ’ button (red Maintenance symbol).

‘Switch open’

T Turn the switch to the x position.

‘Milk system is being rinsed’appears and the fine foam

frother is rinsed.
The rinse stops automatically. ‘Switch close’ appears on the
display.

T Turn the switch to the ° position.

The start screen is displayed.

2

E6/E60 – Quick Reference Guide

Cleaning the fine foam
frother

CAUTION

To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

E JURA milk system cleaner is available from specialised dealers.

Precondition: The start screen is displayed.

T Press the ‘ P ’ button.
T Press the ‘Clean the milk system’ button.

‘Clean the milk system’

T Press the ‘Start’ button.
T Press the ‘Next’ button.

‘Clean the milk system’ / ‘Milk system cleaner’

T Remove the milk pipe from the milk container or carton.
T Pour 250 ml of fresh water into a receptacle and add 1 capful

of milk system cleaner.

T Immerse the milk pipe in the receptacle.
T Place a receptacle under the fine foam frother.
T Press the ‘Next’ button.

As soon as the machine has heated up, ‘Switch open’
appears.

T Turn the switch to the x position.

‘Milk system is being cleaned’ appears and the fine foam

frother and the milk pipe are cleaned.

‘Switch close’

T Turn the switch to the ° position.

‘Clean the milk system’

T Rinse the receptacle thoroughly, fill it with 250 ml of fresh

water and immerse the milk pipe in the water.

T Empty the other receptacle and place it under the fine foam

frother once more.

T Press the ‘Next’ button.

‘Switch open’

T Turn the switch to the x position.

‘Milk system is being cleaned’ appears and the fine foam

frother and the milk pipe are rinsed with fresh water.

‘Switch close’

3