JURA 13781, 15027 User Manual

Page 1

Instructions for use for IMPRESSA A5 One Touch

The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-tounderstand style, its thoroughness and coverage of safety aspects.

Page 2

Table of contents

Your IMPRESSA A5 One Touch

Control elements 34 Important information 36

Proper use ...............................................................................................................................................................36

For your safety .......................................................................................................................................................36

1 Preparing and using for the first time 38

JURA on the Internet .............................................................................................................................................38

3-colour plain text display ....................................................................................................................................38

Setting up the machine ........................................................................................................................................38

Filling the bean container ....................................................................................................................................38

First-time use ..........................................................................................................................................................39

First-time use with filter cartridge activation ...................................................................................................39

First-time use without filter cartridge activation ............................................................................................ 40

Determining the water hardness ....................................................................................................................... 40

Filling the water tank ............................................................................................................................................41

2 Preparation 41

Espresso, coffee ...................................................................................................................................................... 41

Preparing two speciality coffees at the touch of a button ............................................................................. 41

Latte macchiato, cappuccino ...............................................................................................................................42

Permanently setting the amount of water for the cup size ...........................................................................42

Ground coffee .........................................................................................................................................................43

Adjusting the grinder ............................................................................................................................................43

Hot water................................................................................................................................................................44

3 Daily operation 44

Switching on the machine .................................................................................................................................. 44

Daily maintenance ................................................................................................................................................44

Switching off the machine .................................................................................................................................. 44

4 Permanent settings in programming mode 45

Products ................................................................................................................................................................. 45

Setting the water hardness ................................................................................................................................. 45

Energy-saving mode ............................................................................................................................................ 46

Automatic switch-off ............................................................................................................................................46

Rinses .......................................................................................................................................................................47

Unit for amount of water .....................................................................................................................................47

Language ................................................................................................................................................................ 48

5 Maintenance 48

Rinsing the machine ............................................................................................................................................48

Rinsing the milk system ...................................................................................................................................... 48

Cleaning the milk system ....................................................................................................................................49

Dismantling and rinsing the dual spout ...........................................................................................................49

Inserting and activating the filter ...................................................................................................................... 50

Changing the filter................................................................................................................................................. 51

Page 3

Table of contents

Cleaning the machine ...........................................................................................................................................52

Descaling the machine ........................................................................................................................................52

Descaling the water tank ......................................................................................................................................53

Cleaning the bean container ...............................................................................................................................53

6 Display messages 54 7 Troubleshooting 55 8 Transport and environmentally friendly disposal 56

Transport/ Emptying the system ...................................................................................................................... 56

Disposal .................................................................................................................................................................. 56

9 Technical data 56 10 Index 57 11 JURA contact details/ Legal information 59

Symbol description

Warnings

J WARNING

J CAUTION

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

ESPRESSO

Always take note of any information marked with the words CAUTION or WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury.

Prompt to take action. This symbol means that you are being prompted to perform some action.

Information and tips to make it even easier to use your IMPRESSA. Display

Page 4

Control elements

1 Water tank 2 Mains cable (back of the machine) 3 Milk pipe 4 Coffee grounds container 5 Drip tray

6 Bean container with aroma preservation cover 7 Hot-water spout 8 Height-adjustable dual spout 9 Cup grille

Page 5

Control elements

4 5 6

1 Cover for powder chute for ground coffee 2 Powder chute for ground coffee 3 Display

4 c Maintenance button 5 / Cappuccino button 6 ( Latte Macchiato button

7 Rotary Switch status display

8 Cover cap for grinder adjustment switch 9 Grinder adjustment switch

10 g Rotary Switch 11 m Hot Water button 12 < Espresso button 13 Q On/Off button 14 > Coffee button

8 9

12 13 14

Page 6

Important information

Proper use

The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use.

Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty service is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.

For your safety

Please carefully read and observe the important safety information set out below.

To avoid danger of potentially fatal electric shock:

Never use a machine which is

damaged or has a defective mains cable.

In the event of signs of damage,

for example if there is a smell of burning, unplug the machine immediately from the mains supply and contact JURA service. If the mains cable of this

machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre. Make sure that the IMPRESSA

and the mains cable are not located close to hot surfaces. Be careful to ensure that the

mains cable is not trapped and does not rub against sharp edges. Never open and repair the

machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

Never allow the mains cable to

loosely hang down. The mains

Page 7

Important information

cable could pose a tripping hazard or become damaged. Protect the IMPRESSA from

environmental influences such as rain, frost and direct sunlight. Do not immerse the IMPRESSA,

mains cable or connections in water. Do not put the IMPRESSA or any

individual parts in the dishwasher. Before cleaning, switch your

IMPRESSA off with the On/Off button. Always wipe the IMPRESSA with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash. Only connect the machine to the

mains voltage in accordance with the information on the rating plate. The rating plate is located on the underside of your IMPRESSA. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’). Connect the IMPRESSA directly

to a domestic power socket. Using multi-socket adapters or extension cords may cause overheating.

Please only use original JURA

maintenance products. Use of products that are not explicitly recommended by JURA could damage the IMPRESSA. Do not use any coffee beans

treated with additives or caramelised coffee beans. Only fill the water tank with

fresh, cold water. Do not fill the bean container

with water. Switch the machine off with the

On/Off button if you are going to be absent for a longer period of time and remove the mains plug from the power socket. Children may not clean or ser-

vice the machine unless supervised by a responsible person. Do not allow children to play

with the machine. Keep children under the age of 8

away from the machine, or supervise them constantly. Children aged 8 and over may

only operate the machine without supervision if they have been instructed in how to use it safely. Children must be able to recognise and understand the potential dangers arising from incorrect use.

Page 8

1 Preparing and using for the first time

People, including children, who

do not have the physical, sen-

sory or mental capabilities to use the machine safely or are inexperienced or lack knowl-

edge in how to use the machine

safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.

Safety when handling the CLARIS Blue filter cartridge:

Filter cartridges should be kept

out of the reach of children.

Store filter cartridges in a dry

place in the sealed packaging.

Protect cartridges from heat and

direct sunlight.

Do not use damaged filter

cartridges.

Do not open filter cartridges.

1 Preparing and using for the

first time

This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step to enjoy your first perfect cup of coffee.

JURA on the Internet

Visit us on the Internet.

On the JURA website (www.jura.com) you will find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee.

3-colour plain text display

Your IMPRESSA features a 3-colour plain text display. The colours of the display texts have the following meanings:

Green: The IMPRESSA is ready for use.

Red: The IMPRESSA is prompting you to

perform some action. Yellow: You are in programming mode.

Setting up the machine

When setting up your IMPRESSA, please note the following:

Place the machine on a horizontal surface that

is not sensitive to water. Choose a spot for your IMPRESSA which

protects the machine against overheating. Ensure that the ventilation slots are not covered.

Filling the bean container

CAUTION

Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.

T Only use untreated coffee beans to fill the

bean container.

Page 9

1 Preparing and using for the first time

T Remove the aroma preservation cover of the

bean container.

T Remove any dirt or foreign objects from

inside the bean container.

T Fill the bean container with coffee beans.

T Close the bean container.

First-time use

When using the machine for the first time, you can choose whether you want to operate IMPRESSA with or without the CLARIS Blue filter cartridge. If the water hardness is 10°dH or more, we recommend using the filter cartridge. If you do not know the hardness of your water, you can find this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’).

E The On/Off button also acts as a power

switch. When the IMPRESSA is switched off, the machine does not consume standby energy.

J WARNING

If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock.

T Never use a machine which is damaged or

has a defective mains cable.

Precondition:Bean container is filled.

T Insert the mains plug into a power socket. Q T Press the On/Off button to switch the

machine on.

SPRACHE DEUTSCH

g T Turn the Rotary Switch until the required

language is displayed, for example

LANGUAGE ENGLISH.

k T Press the Rotary Switch to confirm the

language setting.

OK, the language is set. FILTERp/ YESp

E Now decide whether you want to operate

your IMPRESSA with or without a CLARIS Blue filter cartridge.

First-time use with filter cartridge activation

k T Press the Rotary Switch.

INSERT FILTER

T Remove the water tank. T Open the filter holder. T Insert the filter cartridge into the water tank,

exerting slight pressure.

T Close the filter holder. It will click into place

audibly.

E After two months, the filter will cease to

work. Set the date on the date plate on the filter holder in the water tank.

T Fill the water tank with fresh, cold water and

reinsert it.

T Place a receptacle (at least 500ml) under the

hot-water and dual spout.

Page 10

1 Preparing and using for the first time

k T Press the Rotary Switch.

FILTER RINSING, water flows out of

the hot-water spout.

E You can interrupt rinsing of the filter at any

time by pressing any button. Press the Maintenance buttonc, to continue with rinsing of the filter.

E The water may be slightly discoloured. This

is not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically.

SYSTEM FILLING, water flows out of

the dual spout.

HEATING RINSING, the system rinses itself. The

operation stops automatically.

READY

First-time use without filter cartridge activation

g T Turn the Rotary Switch until FILTER-/

NO- is displayed.

k T Press the Rotary Switch.

16°dH

g T Turn the Rotary Switch to change the water

hardness setting, e.g. to

k T Press the Rotary Switch.

25°dH.

FILL WATER TANK

T Remove the water tank.

T Fill the water tank with fresh, cold water and

reinsert it.

PRESS RINSE

T Place a receptacle under the hot- water

spout and the dual spout.

c T Press the Maintenance button.

SYSTEM FILLING, the system fills up

with water.

HEATING RINSING, the system rinses itself. The

operation stops automatically.

READY

Determining the water hardness

You can find out what the water hardness is by using the Aquadur® test strip supplied as standard.

T Hold the test strip briefly (for one second)

under running water.

T Shake off the water. T Wait for about one minute. T You will then be able to read the degree of

water hardness from the discolouration of the Aquadur® test strip and the description on the packaging.

The water hardness can now be set.

Page 11

2 Preparation

Filling the water tank

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

CAUTION

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

T Remove the water tank and rinse with cold

water.

T Fill the water tank with fresh, cold water and

reinsert it.

2 Preparation

E You can interrupt preparation at any time

while a speciality coffee, speciality coffee with milk or hot water is being prepared. Just press any button.

E Before and during the grinding operation

you can select the coffee strength of espresso <, coffee >, cappuccino / and

latte macchiato ( :

E During preparation, you can change the

preset amounts (e.g. amount of milk foam or water) by turning the Rotary Switch g.

E You can follow the current status of

preparation on the progress bar.

NORMAL, STRONG.

Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Products’).

Espresso, coffee

Preparation of espresso < and coffee > follows this model.

Example:Proceed as follows to prepare one coffee. Precondition:

T Place a cup under the dual spout.

> T Press the Coffee button to start preparation.

READY is displayed.

COFFEE, the preset amount of water flows

into the cup. Preparation stops automatically.

READY

Preparing two speciality coffees at the touch of a button

The preparation of 2espressi and 2coffees follows this same model.

Example:Prepare two espressi. Precondition:

T Place two espresso cups under the dual

< T Press the Espresso button twice (within two

READY is displayed.

spout.

seconds) to start preparation.

2 ESPRESSI, the preset amount of

water flows into the cups.

E Please note that the desired speciality coffee

is prepared twice in succession.

Preparation stops automatically.

READY

Page 12

2 Preparation

Latte macchiato, cappuccino

Your IMPRESSA can prepare a latte macchiato or cappuccino at the touch of a button. There is no need to move the glass or cup.

Latte macchiato ( and cappuccino / are prepared following this model.

Example:Proceed as follows to prepare one latte macchiato.

Precondition:

T Place a glass under the dual spout.

T Remove the protective cover of the dual

T Connect the milk pipe to the dual spout.

T Immerse the other end of the milk pipe in a

E Ensure that the filling height of the milk is

( T Press the Latte Macchiato button.

READY is displayed.

spout.

receptacle with milk (figure: optional stainless steel vacuum milk container, 0.4 litres, from JURA).

no higher than the milk pipe connection on the dual spout.

LATTE MAC., the milk foam is prepared.

Preparation stops automatically when the preset amount of milk is reached.

PAUSE

E There is a short interval while the hot milk

separates from the milk foam. This allows the typical layers of a latte macchiato to form. You can choose the length of this interval in programming mode (see Chapter4 ‘Permanent settings in programming mode – Products’).

LATTE MAC., coffee preparation starts.

The preset amount of water flows into the glass. Preparation stops automatically.

READY

To ensure that the milk system in the dual spout always works properly, you must clean it daily (see Chapter 5 ‘Maintenance – Cleaning the milk system’).

Permanently setting the amount of water for the cup size

It is easy to make permanent settings for the amount of water for all speciality coffees and hot water according to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount of water will be dispensed.

Example:Permanently adjust the amount of cappuccino to the cup size.

Precondition:

connected to the dual spout.

T Place a cup under the dual spout.

/ T Press and hold the Cappuccino button until

READY is displayed. Milk is

ENOUGH MILK? appears.

/ T Release the Cappuccino button.

The milk foam is prepared.

T Press any button as soon as there is

sufficient milk foam in the cup.

OK ENOUGH COFFEE?, the coffee flows

into the cup.

Page 13

2 Preparation

T Press any button as soon as there is

sufficient coffee in the cup.

OK, CAPPUCCINO, the set amounts for

one cappuccino are permanently stored.

READY

E You can alter this setting at any time by

repeating the above procedure.

Ground coffee

You can choose to use a second coffee variety, for example decaffeinated coffee, with the powder chute for ground coffee.

E Never add more than one level measuring

spoon of ground coffee.

E It is not possible to prepare 2 espressi or 2

coffees with ground coffee.

E Use ground coffee which is not ground too

finely. Very fine coffee can block up the system so that the coffee only comes out in drips.

E If you did not add a sufficient amount of

ground coffee, is displayed and the IMPRESSA stops the operation.

E The desired speciality coffee must be

prepared within approximately one minute after filling with the ground coffee. Otherwise the IMPRESSA stops the operation and is once more ready for use.

The preparation of coffee, espresso, cappuccino and latte macchiato with ground coffee follows this model.

Example:Prepare a cup of coffee using ground coffee.

Precondition:

T Place a cup under the dual spout.

T Open the powder chute for ground coffee.

NOT ENOUGH POWDER

READY is displayed.

FILL POWDER

T Place the filler funnel for ground coffee on

the powder chute.

T Place one level measuring spoon of ground

coffee into the filler funnel.

T Close the powder chute for ground coffee.

SELECT BUTTON

> T Press the Coffee button to start preparation.

COFFEE, the preset amount of water flows

into the cup. Preparation stops automatically.

READY

Adjusting the grinder

You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee.

CAUTION

If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged.

T Only adjust the consistency of grind when

the grinder is running.

The consistency of grind is correct if the coffee flows regularly from the dual spout. In addition a fine, thick crema forms.

Example:Change the consistency of grind during the preparation of an espresso.

T Place a cup under the dual spout.

Page 14

3 Daily operation

T Open the cover of the grinder adjustment

switch.

< T Press the Espresso button to start prepara-

tion.

T Turn the grinder adjustment switch to the

desired position while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically.

READY

Hot water

J CAUTION

There is a danger of scalding from hot water splashes.

T Avoid direct contact with the skin.

Precondition:

T Place a cup under the hot-water spout. m T Press the Hot Water button.

READY is displayed.

WATER, the preset amount of water flows

into the cup. Preparation stops automatically.

READY

3 Daily operation

When the IMPRESSA is switched on, a rinse operation is automatically initiated. In programming mode you can change this setting so that the machine prompts you to perform the switch-on rinse, which must be started by pressing the Maintenance buttonc (see Chapter 4 ‘Permanent settings in programming mode – Rinses’).

T Place a receptacle under the dual spout.

Q T Press the On/Off button to switch the

machine on.

HEATING RINSING, the system rinses itself.The

operation stops automatically.

READY

Daily maintenance

To ensure that you get many years of reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the machine requires daily maintenance.

T Remove the drip tray. T Empty the coffee grounds container and

drip tray and rinse with warm water.

T Reinsert the coffee grounds container and

the drip tray.

T Rinse the water tank with clean water. T Dismantle and rinse the dual spout (see

Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout’).

T Wipe the surface of the machine with a

clean, soft, damp cloth (e.g. microfibre cloth).

E In the interests of hygiene, we recommend

changing the milk pipe on a regular basis (approx. every 3 months). Replacement pipes are available from specialised dealers.

Switching on the machine

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

Switching off the machine

When the IMPRESSA is switched off, the system is automatically rinsed if a speciality coffee has been prepared. If cappuccino or latte macchiato has been prepared, cappuccino frother rinsing also takes place.

Page 15

4 Permanent settings in programming mode

T Place a receptacle under the dual spout. Q T Press the On/Off button.

RINSING, CAPPUCCINO RINSING, the system rinses itself. The

operation stops automatically. Your IMPRESSA is switched off.

E When the IMPRESSA is switched off with the

On/Off button, the machine does not

consume standby energy.

4 Permanent settings in pro-

gramming mode

Products

You can make the following permanent settings for espresso and coffee:

Amount of water: 25ML – 240ML

Coffee strength: NORMAL, STRONG

Temperature: NORMAL, HIGH

You can make the following permanent settings for latte macchiato and cappuccino:

Amount of milk foam: 3SEC – 120SEC

Interval: 0SEC – 60SEC

Coffee strength: NORMAL, STRONG

Amount of water: 25ML – 240ML

Temperature: NORMAL, HIGH

You can make the following permanent setting for hot water:

Amount of water: 25ML – 450ML

Permanent settings in programming mode always follow the same model.

Example:Permanently change the coffee strength (

FLAVOUR) for espresso from STRONG to

NORMAL.

Precondition:

k T Press and hold the Rotary Switch until

g T Turn the Rotary Switch until

READY is displayed.

RINSE appears.

PRODUCT is

displayed.

k T Press the Rotary Switch to enter the

programme item.

SELECT BUTTON

E Next select the button of the product for

which you would like to make settings. No product is prepared at this point.

< T Press the Espresso button.

ESPRESSO

WATER

g T Turn the Rotary Switch until FLAVOUR is

displayed.

k T Press the Rotary Switch to enter the

programme item.

STRONG

g T Turn the Rotary Switch until NORMAL is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, the coffee strength is set.

FLAVOUR

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit the pro-

gramme item.

PRODUCT

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Setting the water hardness

E If you are using the CLARIS Blue filter

cartridge and have activated it in programming mode, you will not be able to adjust the water hardness.

The harder the water is, the more frequently the IMPRESSA needs to be descaled. It is therefore important to set the water hardness accurately.

The water hardness can be adjusted on a continuous scale between 1° dH and 30° dH.

Page 16

4 Permanent settings in programming mode

Example:Change the water hardness setting from

16°dH to 25°dH.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

is displayed.

k T Press the Rotary Switch to enter the

programme item.

HARDNESS

16°dH

g T Turn the Rotary Switch until 25°dH is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, the water hardness is set.

HARDNESS

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Energy-saving mode

The energy-saving mode (Energy Save Mode,

E.S.M.

) helps you to prevent your machine from consuming power unnecessarily and to actively save energy:

ENERGYp

Soon after the last preparation, the

IMPRESSA stops heating up. After about 5 minutes the message

displayed. Before you can prepare a speciality coffee,

speciality coffee with milk, or hot water, the machine must heat up.

ENERGY-

The IMPRESSA is constantly ready for use.

All speciality coffees as well as hot water can

be prepared without having to wait.

Example:Change energy-saving mode from

ENERGY ON is

ENERGYp to ENERGY-.

Precondition:

READY is displayed.

k T Press and hold the Rotary Switch until

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

programme item.

ENERGYp is

ECONOMYp

g T Turn the Rotary Switch until ECONOMY-

is displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, energy-saving mode is set.

ENERGY-

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Automatic switch-off

By instructing your IMPRESSA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your IMPRESSA switches off automatically after the preset time following the last action on the machine.

The automatic switch-off can be set to between 15minutes and 9hours.

Example:Change the switch-off time from

2HRS to 1HRS.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

is displayed.

k T Press the Rotary Switch to enter the

programme item.

OFF AFTER

2HRS

g T Turn the Rotary Switch until 1HRS is

displayed.

Page 17

4 Permanent settings in programming mode

k T Press the Rotary Switch to confirm the

setting.

OK, the switch-off time is set.

OFF AFTER

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Rinses

In the programme item RINSES you can make the following settings:

INIT RINSE MANUAL

The switch-on rinse must be started

manually.

INIT RINSE AUTOMATIC

The switch-on rinse is started automatically.

C-RINSE AFTER10'

You are prompted to perform a cappuccino

rinse 10minutes after preparation of a speciality coffee with milk.

C-RINSE NOW

You are prompted to perform a cappuccino

rinse immediately after preparation of a speciality coffee with milk.

Example:Change the setting such that cappuccino frother rinsing is performed immediately after preparation of a speciality coffee with milk.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

programme item.

RINSES is

INIT RINSE

g T Turn the Rotary Switch until C-RINSE is

displayed.

k T Press the Rotary Switch to enter the

programme item.

AFTER10'

g T Turn the Rotary Switch until NOW is

displayed.

k T Press the Rotary Switch to confirm the

setting.

C-RINSE

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit the pro-

gramme item.

RINSES

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Unit for amount of water

You can change the unit for the amount of water from ‘ml’ to ‘oz’.

Example:Change the unit for the amount of water from

ML to OZ.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

programme item.

DISPLAY is

g T Turn the Rotary Switch until OZ is displayed. k T Press the Rotary Switch to confirm the

setting.

OK, the unit for the amount of water is set.

DISPLAY

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Page 18

5 Maintenance

Language

In this programme item you can set the language used by your IMPRESSA.

Example:Change the language from

DEUTSCH.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

ENGLISH

RINSE appears.

g T Turn the Rotary Switch until

is displayed.

k T Press the Rotary Switch to enter the

programme item.

LANGUAGE

ENGLISH

g T Turn the Rotary Switch until DEUTSCH is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, the language is set.

SPRACHE

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

BEREIT

5 Maintenance

Your IMPRESSA has the following integrated maintenance programmes:

Cappuccino frother cleaning (C-CLEAN)

Rinsing the machine (RINSE)

Cappuccino frother rinsing (C-RINSE)

Cleaning the machine (CLEAN)

Changing the filter (FILTER)

Descaling the machine (DE-SCALE)

Rinsing the machine

You can initiate the rinse operation manually at any time.

Precondition:

T Place a receptacle under the dual spout.

k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

k T Press the Rotary Switch to enter the

programme item.

C-CLEAN

g T Turn the Rotary Switch until RINSE is

displayed.

k T Press the Rotary Switch to initiate the rinse

operation.

RINSING, the system rinses itself. The

operation stops automatically.

READY

Rinsing the milk system

After each milk preparation, the IMPRESSA prompts you to perform a cappuccino rinse.

Precondition:

displayed.

T Place a receptacle under the dual spout.

CAPPUCCINO RINSE is

E You can start the maintenance programmes

at any time in programming mode (programme item

taken in this programme item, programming mode is exited automatically after approximately 5 seconds.

RINSE). If no action is

Page 19

5 Maintenance

k T Press the Rotary Switch to start cappuccino

frother rinsing.

CAPPUCCINO RINSING, the milk

system is rinsed. The rinse stops automatically.

appears on the display.

READY

Cleaning the milk system

The dual spout must be cleaned daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene. Your IMPRESSA will not prompt you to clean the dual spout.

CAUTION

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the milk.

T Use only original JURA maintenance

products.

E JURA Cappuccino Cleaner is available from

specialised dealers.

k T Press and hold the Rotary Switch until

RINSE appears.

k T Press the Rotary Switch to enter the

programme item.

C-CLEAN

k T Press the Rotary Switch to start cappuccino

frother cleaning.

CLEANER FOR CAPPU.

T Remove the milk pipe from the receptacle

with milk.

T Pour 250 ml of fresh water into a receptacle

and add one capful (max. 15 ml) of Cappuccino Cleaner.

T Immerse the milk pipe in the receptacle.

T Place another receptacle under the dual

spout.

k T Press the Rotary Switch.

CLEANING, the milk system and the pipe

are cleaned. The operation is interrupted,

WATER FOR

CAPPUCCINO.

T Rinse the receptacle thoroughly, fill it with

250ml of fresh water and immerse the milk pipe in it.

T Empty the receptacle under the dual spout

and place it back underneath.

k T Press the Rotary Switch.

CLEANING, the milk system and the pipe

are rinsed with fresh water. The operation stops automatically.

READY

Dismantling and rinsing the dual spout

The dual spout must be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene. Your IMPRESSA will not prompt you to clean the dual spout.

T Remove the milk pipe and rinse thoroughly

under running water.

T Press the releasing devices and pull the dual

spout down and off.

Page 20

5 Maintenance

T Push the milk system down and remove it.

T Dismantle the milk system into its individual

parts.

T Rinse all parts under running water. If there

are severely dried on milk residues, firstly immerse the individual parts in JURA Cappuccino Cleaner and then clean them thoroughly.

T Fit the air intake pipe.

T Reassemble the milk system, noting the

numbering on the parts.





T Insert the assembled individual parts into

the dual spout and press them together.

T Fit the dual spout on the machine. It will

click into place audibly.

Inserting and activating the filter

Your IMPRESSA no longer has to be descaled if you are using the CLARIS Blue filter cartridge. If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.

E Perform the ‘inserting the filter’ operation

without any interruptions. This will ensure that your IMPRESSA always produces its best.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

programme item.

FILTER- is

NO-

g T Turn the Rotary Switch until YESp is

displayed.

k T Press the Rotary Switch to confirm the

setting.

INSERT FILTER

T Remove and empty the water tank. T Open the filter holder.



Page 21

5 Maintenance

T Insert the filter cartridge into the water tank,

exerting slight pressure.

T Close the filter holder. It will click into place

audibly.

E After two months, the filter will cease to

work. Set the date on the date plate on the filter holder in the water tank.

T Fill the water tank with fresh, cold water and

reinsert it.

T Place a receptacle (at least 500ml) under the

hot-water spout.

k T Press the Rotary Switch.

FILTER RINSING, water flows out of

the hot-water spout.

E You can interrupt rinsing of the filter at any

time by pressing any button. Press the Maintenance buttonc, to continue with rinsing of the filter.

E The water may be slightly discoloured. This

is not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically.

HEATING

READY

The filter is now activated.

Changing the filter

E After 50 litres of water have flowed through,

the filter will cease to work. Your IMPRESSA will automatically prompt you to change the filter.

E After two months, the filter will cease to

work. Set the date on the date plate on the filter holder in the water tank.

E If the CLARIS Blue filter cartridge is not

activated in programming mode, you will not be prompted to change the filter.

Precondition:

c T Press the Maintenance button.

FILTER/ READY is displayed.

INSERT FILTER

T Remove and empty the water tank. T Open the filter holder and remove the old fil-

ter cartridge.

T Insert a new filter cartridge into the water

tank, exerting slight pressure.

T Close the filter holder. It will click into place

audibly.

T Fill the water tank with fresh, cold water and

reinsert it.

T Place a receptacle (at least 500ml) under the

hot-water spout.

k T Press the Rotary Switch.

FILTER RINSING, water flows out of

the hot-water spout.

E You can interrupt rinsing of the filter at any

time by pressing any button. Press the Maintenance buttonc, to continue with rinsing of the filter.

E The water may be slightly discoloured. This

is not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically.

HEATING

READY

Page 22

5 Maintenance

Cleaning the machine

After 180preparations or 80switch-on rinses, the IMPRESSA will prompt you to clean it.

CAUTION

If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.

T Use only original JURA maintenance

products.

E The cleaning programme lasts approxi-

mately 15 minutes.

E Do not interrupt the cleaning programme.

The quality of cleaning will be impaired if you do so.

E JURA cleaning tablets are available from

specialised dealers.

Precondition:

c T Press the Maintenance button.

CLEAN/ READY is displayed.

EMPTY TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

PRESS RINSE

T Place a receptacle under the dual spout.

c T Press the Maintenance button.

CLEANING, water flows out of the dual

spout. The operation is interrupted,

ADD

TABLET.

T Open the powder chute for ground coffee

and drop in a JURA cleaning tablet.

c T Press the Maintenance button.

CLEANING, water flows out of the dual

spout repeatedly.

EMPTY TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

HEATING

READY

Descaling the machine

The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water.

J CAUTION

If the descaling agent comes into contact with the skin or eyes, this can cause irritation.

T Avoid contact with the skin or eyes. T Rinse off the descaling agent with clean

water. Should you get any descaling agent in your eye, see a doctor.

CAUTION

If the wrong descaling agent is used, the machine could be damaged and/or traces could be left behind in the water.

T Use only original JURA maintenance

products.

CAUTION

If the descaling operation is interrupted, there may be damage to the machine.

T Allow the descaling programme to run to

the end.

T Close the powder chute for ground coffee.

PRESS RINSE

CAUTION

If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out.

T Clean up any splashes immediately.

E The descaling programme lasts approxi-

mately 40minutes.

Page 23

5 Maintenance

E JURA descaling tablets are available from

specialised dealers.

E If you use a CLARIS Blue filter cartridge and

this is activated, you will not be prompted to descale.

Precondition:

displayed. c T Press the Maintenance button.

DE-SCALE/ READY is

EMPTY TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

AGENT IN TANK

T Remove and empty the water tank. T Completely dissolve the contents of one blis-

ter (three JURA descaling tablets) in a receptacle holding 500 ml of water. This may take several minutes.

T Pour the solution into the empty water tank

and reinsert the tank.

PRESS RINSE

T Place a receptacle under the hot-water

spout.

c T Press the Maintenance button.

DE-SCALING, water flows out of the

hot-water spout repeatedly.

EMPTY TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

FILL WATER TANK

T Empty the receptacle and place it under the

dual and hot-water spout.

T Remove the water tank, rinse thoroughly, fill

with fresh, cold water and reinsert.

PRESS RINSE

c T Press the Maintenance button.

DE-SCALING, water flows out of the

dual and hot-water spout. The operation is interrupted,

TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

EMPTY

READY

E If the descaling operation stops unexpect-

edly, rinse the water tank thoroughly.

Descaling the water tank

Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.

T Remove the water tank. T If you use a CLARIS Blue filter cartridge,

remove it.

T Descale the tank with a mild conventional

descaling agent in accordance with the manufacturer's instructions.

T Rinse the water tank thoroughly. T If you use a CLARIS Blue filter cartridge,

reinsert it.

T Fill the water tank with fresh, cold water and

reinsert it.

Cleaning the bean container

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time. Q T Press the On/Off button to switch the

machine off.

T Disconnect the mains plug. T Remove the bean container cover. T Remove the coffee beans with a vacuum

cleaner.

T Clean the bean container with a soft, dry

cloth.

T Fill the bean container with fresh coffee

beans, then close the bean container cover.

Page 24

6 Display messages

Message Cause/Result Action

FILL WATER

TANK

EMPTY GROUNDS

TRAY MISSING

FILL BEANS

CLOSE COVER

PRESS RINSE

CAPPUCCINO

RINSE READY/ CLEAN

READY/

DE-SCALE

READY/ FILTER

NOT ENOUGH

POWDER

TOO HOT

The water tank is empty or not correctly inserted. You cannot prepare any products.

The coffee grounds container is full. No speciality coffees can be prepared, but hot water preparation is possible.

The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products.

The bean container is empty. No speciality coffees can be prepared, but hot water preparation is possible.

The aroma preservation cover for the bean container is not fitted or not fitted correctly.

The IMPRESSA is prompting you to perform a rinse or continue a maintenance programme that was already started.

The IMPRESSA requests a cappuccino rinse.

The IMPRESSA is prompting you to clean it.

The IMPRESSA is prompting you to descale it.

After 50litres of water have flowed through the CLARIS Blue filter cartridge, it will cease to work.

There is insufficient ground coffee in the machine; the IMPRESSA stops the operation.

The system is too hot to start a maintenance programme.

T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’).

T Insert the water tank. T Empty the coffee grounds

container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’).

T Insert the drip tray.

T Fill the bean container (see Chapter

1 ‘Preparing and using for the first time – Filling the bean container’).

TFit the aroma preservation cover correctly.

T Press the Maintenance button to start the rinse or to continue the maintenance programme.

T Press the Maintenance button to start cappuccino frother rinsing.

T Perform cleaning (see Chapter 5 ‘Maintenance – Cleaning the machine’).

T Perform descaling (see Chapter 5 ‘Maintenance – Descaling the machine ’).

T Replace the CLARIS Blue filter cartridge (see Chapter 5 ‘Maintenance – Changing the filter’).

T The next time you prepare a beverage, add more ground coffee (see Chapter 2 ‘Preparation – Ground coffee’).

T Wait for several minutes until the system has cooled or prepare a speciality coffee or hot water.

Page 25

7 Troubleshooting

Problem Cause/Result Action

Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout.

Coffee only comes out in drips when it is being prepared.

Water hardness cannot be adjusted.

FILL WATER TANK

is displayed even though the water tank is full.

Grinder is making a very loud noise.

ERROR2 is displayed.

Other

ERROR messages

are displayed.

The dual spout is dirty.

Coffee or ground coffee has been ground too finely and is blocking the system.

The CLARIS Blue filter cartridge is activated.

The water tank float is trapped.

There are foreign objects in the grinder.

If the machine was exposed to the cold for a long period of time, heating is disabled for safety reasons.

–

T Clean the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle and rinse the dual spout. (see Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout’).

T Set the grinder to a coarser setting or use coarser ground coffee (see Chapter 2 ‘Preparation – Adjusting the grinder’).

T Deactivate the CLARIS Blue filter cartridge in programming mode.

T Descale the water tank (see Chapter 5 ‘Maintenance – Descaling the water tank’).

T Contact customer support in your country (see Chapter 11 ‘JURA contact details/ Legal information’).

T Warm the machine at room temperature.

T Switch off the IMPRESSA with the On/Off

button. T Contact customer support in your country (see Chapter 11 ‘JURA contact details/ Legal information’).

E If you were unable to solve the problem, contact customer support in your country (see Chapter 11

‘JURA contact details/ Legal information’).

Page 26

8 Transport and environmentally friendly disposal

8 Transport and environmentally

friendly disposal

Transport/ Emptying the system

Keep the packaging for your IMPRESSA. It should be used to protect the machine during transport.

In order to protect the IMPRESSA from frost during transport, the system must be emptied.

Precondition:

T Place a receptacle under the hot-water

m T Press the Hot Water button.

T Remove and empty the water tank.

Q T Press the On/Off button to switch the

READY is displayed.

spout.

WATER, hot water flows out of the

hot-water spout.

Hot water will continue to flow until the system is empty.

FILL WATER TANK

machine off.

9 Technical data

Voltage 220–240V~,

50Hz Power 1450W Conformity mark

Energy consumption

ECONOMY-

Energy consumption

ECONOMYp

Pump pressure Static, max.

Holding capacity of water tank (without filter)

Holding capacity of bean container

Holding capacity of coffee grounds container

Cable length approx. 1.1m Weight approx. 10.9kg Dimensions (W×H×D) 23.9 × 32.4 ×

Information for testers (repeat test in accordance with DIN VDE 0701-0702): The central grounding point (CGP) is located on the underside of the machine, on the right and at the back.

A S

approx. 10.6Wh

approx. 4.3Wh

15bar

1.1l

125g

approx. 10

servings

44.5cm

Disposal

Please dispose of old machines in an environmentally neutral way.

Old machines contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machines via suitable collection systems.

Page 27

10 Index

Addresses 59 Aroma preservation cover

Bean container with aroma preservation cover 34

Automatic switch-off 46

Bean container

Bean container with aroma preservation cover 34 Cleaning 53 Filling 38

Bus bar

Technical data 56

Button

Cappuccino button 35 Coffee button 35 Espresso button 35 Hot Water button 35 Latte Macchiato button 35 Maintenance button 35 On/Off button 35

Cappuccino 42 Cappuccino frother cleaning

Cleaning the milk system 49

Cappuccino frother rinsing

Rinsing the milk system 48 Central grounding point 56 CLARIS Blue filter cartridge

Changing 51

Inserting and activating the filter 50 Cleaning

Bean container 53

Machine 52 Coffee 41 Coffee grounds container 34 Consistency of grind

Adjusting the grinder 43

Grinder adjustment switch 35 Contact details 59 Cup grille 34 Customer support 59

Descaling

Machine 52

Water tank 53 Display 35, 38 Display messages 54 Disposal 56 Double product

Two speciality coffees 41 Drip tray 34 Dual spout

Dismantling and cleaning 49

Height-adjustable dual spout 34

Emptying the system 56 Energy-saving mode 46 Errors

Troubleshooting 55 Espresso 41

Filling

Bean container 38

Water tank 41 Filter

Changing 51

Inserting and activating the filter 50 First-time use 39

With filter cartridge activation 39

Without filter cartridge activation 40

Grinder adjustment switch 35 Ground coffee 43

Powder chute for ground coffee 35 Grounding point 56

Hotline 59 Hot water 44 Hot-water spout 34

Instant coffee

Ground coffee 43 Internet 38

Page 28

10 Index

JURA

Contact details 59 Internet 38

Language 48 Latte macchiato 42

Machine

Cleaning 52 Descaling 52 Rinsing 48 Setting up 38 Switching off 44

Switching on 44 Mains cable 34 Maintenance 48

Daily maintenance 44 Messages, display 54 Milk system

Cleaning 49

Rinsing 48

Permanently setting the water for the cup size 42 Permanent settings in programming mode 45 Powder chute

Powder chute for ground coffee 35 Preparation 41, 42

Cappuccino 42

Coffee 41

Espresso 41

Ground coffee 43

Hot water 44

Latte macchiato 42

Two speciality coffees 41 Problems

Troubleshooting 55 Programming mode 45

Automatic switch-off 46

Energy-saving mode 46

Language 48

Products 45

Rinses 47

Setting the water hardness 45

Unit for amount of water 47 Proper use 36

Rinses 47 Rinsing

Machine 48

Rotary Switch 35

Status display 35

Rotary Switch status display 35

Safety 36 Safety information 36 Settings

Permanent settings in programming mode 45

Setting up

Setting up the machine 38

Spout

Height-adjustable dual spout 34

Hot-water spout 34 Switching off 44 Switching on 44 Switch-off

Automatic switch-off 46 Symbol description 33

Technical data 56 Tel 59 Transport 56 Troubleshooting 55 Two speciality coffees 41

Unit for amount of water 47 Use, First-time 39

Water hardness

Determining the water hardness 40

Setting the water hardness 45 Water tank 34

Descaling 53

Filling 41 Website 38

Page 29

11 JURA contact details/ Legal

information

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233

@ You will find additional contact details for

your country at www.jura.com.

Directives

The machine complies with the following directives:

2006/95/EC– Low Voltage Directive

2004/108/EC– Electromagnetic Compatibility

2009/125/EC– Ecodesign Directive

2011/65/EU– RoHS Directive

Technical changes

We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of the machine. Some details of your IMPRESSA may vary.

11 JURA contact details/ Legal information

Feedback

Your opinion is important to us! Use the contact link at www.jura.com.

The instructions for use contain information which is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG.

JURA 13781, 15027 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual