Page 1
Specifications subject to change without notice
Owner's Manual
THE WAVELINE™
FLUTE
www.JUPITERmusic.com
JFL700W_owner's manual.indd 1-2 2019/3/21 上午11:01
Page 2
Contents
JFL700WD Flute
JFL700WD Flute
1. Assembly 1
2. Disassembly 2
3. Inspection & Maintenance 3
JFL700WE/WRE Flute
1. Assembly 5
2. Disassembly 8
3. Inspection & Maintenance 8
4. Optional Waveline™ Flute
Extension Kit-JJFLH-700WX 10
5. How to use the Waveline™ Flute
Extension Kit 11
Accessory Compartment
Flute Case
Cleaning Rod
Acrylic Flute Stand Beaded Cleaning Swab
Assembly
1
Step 1.
Hold the Waveline bowjoint.
Insert headjoint into the
Waveline bowjoint using a
gentle twisting motion
Polishing
Cloth
Cleaning
Swab
Step 2.
Insert the Waveline bow
headjoint assembly into the
bodyjoint using a gentle
twisting motion.
The Waveline™ Flute Owner’s Manual>>>1
JFL700W_owner's manual.indd 3-1 2019/3/21 上午11:01
Page 3
Step 3.
Adjust the lip plate so the
embouchure hole is in line
with the C# key on the
bodyjoint.
Step 4.
When not playing your flute place on
the acrylic flute stand included with your
instrument.
Inspection & Maintenance
3
1. How to clean the Waveline bowjoint
Insert the beaded cleaning swab through the
Waveline bowjoint assembly to remove excess
moisture.
2. How to clean the inner tubes (headjoint,
bodyjoint, and footjoint)
Pull one corner of the swab through the
end of the cleaning rod. Wrap the remaining
cloth around the cleaning rod.
Disassembly
2
Step 1.
While holding the headjoint remove it from
the Waveline bowjoint with a gentle twisting
motion.
Step 2.
Hold the bodyjoint and remove it from the
Waveline bowjoint with a gentle twisting
motion.
JFL700W_owner's manual.indd 2-3 2019/3/21 上午11:01
Insert the cleaning swab through the
headjoint, bodyjoint, and footjoint to
remove excess moisture.
The Waveline™ Flute Owner’s Manual>>>32<<<The Waveline™ Flute Owner's Manual
Page 4
JFL700WE/WRE Flute
3. How to clean/polish the flute´s surface
Wipe the instrument´s surface after playing
with a soft polishing cloth. When wiping,
hold the instrument carefully as to not
damage delicate key mechanisms or pads.
Accessory Compartment
Flute Case
Polishing
Cloth
Cleaning Swab
Cleaning Rod
Acrylic Flute Stand Beaded Cleaning Swab
Assembly
1
Step 1.
Hold the barrel at the key
post using the thumb and
forefinger.
Step 2.
Connect the footjoint to the
bodyjoint using a gentle
twisting motion. Avoid
depressing the keys during
assembly.
The Waveline™ Flute Owner’s Manual>>>54<<<The Waveline™ Flute Owner's Manual
JFL700W_owner's manual.indd 4-5 2019/3/21 上午11:01
Page 5
Step 3.
Insert headjoint into the
Waveline bowjoint using a
gentle twisting motion.
Step 4.
Insert the Waveline bow headjoint
assembly into the bodyjoint using a gentle
twisting motion. Adjust the lip plate so the
embouchure hole is in line with the C# key on
the bodyjoint.
Step 6.
When not playing your flute place on
the acrylic flute stand included with your
instrument.
Step5.
The specially engraved alignment indicators
located on the headjoint and bodyjoint
ensure correct assembly and optimum
position placement.
The Waveline™ Flute Owner’s Manual>>>76<<<The Waveline™ Flute Owner's Manual
JFL700W_owner's manual.indd 6-7 2019/3/21 上午11:01
Page 6
Disassembly
2
Step 1.
While holding the headjoint remove it from
the Waveline bowjoint with a gentle twisting
motion.
Step 2.
Hold the bodyjoint and remove it from the
Waveline bowjoint with a gentle twisting
motion.
Inspection & Maintenance
2. How to clean the inner tubes (headjoint,
bodyjoint, and footjoint)
Pull one corner of the swab through the
end of the cleaning rod. Wrap the remaining
cloth around the cleaning rod.
Insert the cleaning swab through the
headjoint, bodyjoint, and footjoint to
remove excess moisture.
3. How to clean/polish the flute´s surface
Wipe the instrument´s surface after playing
with a soft polishing cloth. When wiping,
hold the instrument carefully as to not
damage delicate key mechanisms or pads.4.
3
1. How to clean the Waveline bowjoint
Insert the beaded cleaning swab through
the Waveline bowjoint assembly to remove
excess moisture.
The Waveline™ Flute Owner’s Manual>>>98<<<The Waveline™ Flute Owner's Manual
JFL700W_owner's manual.indd 8-9 2019/3/21 上午11:01
Page 7
Optional Waveline™ Flute
How to Use the Waveline™
4
Your JFL700WE/WRE can easily be changed
into a full scale flute with a standard straight
headjoint. All you need is the JJFLH-700WX
Extension Kit.
The Waveline™ Flute Extension Kit contains
the following accessories:
JUPITER Waveline™ Flute Extension Barrel
JUPITER Straight Headjoint with .925 Sterling
Riser
JUPITER Flute Case
JUPITER Flute Zippered Case Cover
Extension Kit-JJFLH-700WX
5
1. Remove the Waveline
bowjoint and headjoint
2. Insert the extension barrel.
Flute Extension Kit
The specially engraved alignment indicators
located on the headjoint and bodyjoint ensure
correct assembly and optimum position
placement.
The Waveline™ Flute Owner’s Manual>>>1110<<<The Waveline™ Flute Owner's Manual
JFL700W_owner's manual.indd 10-11 2019/3/21 上午11:01
Page 8
3. Insert the straight headjoint. Your extended
JFL700WE/WRE is now ready to play!
4. From now on you can use your extended
JFL700WE/WRE as a regular straight
flute. Simply remove the straight headjoint
and footjoint (the extension barrel stays
in the flute) and it will fit perfectly in your
JUPITER flute case and case cover.
The Waveline™ Flute Owner’s Manual>>>1312<<<The Waveline™ Flute Owner's Manual
JFL700W_owner's manual.indd 12-13 2019/3/21 上午11:01
Loading...