Jupio Power Vault 6000
JPV0030
User Manual
Thank you for purchasing this outstanding Jupio product. For optimal
performance and safety, please read this instruction carefully before operating
the product.
How to Use:
Charging your Power Vault
1) Charge the Power Vault via the supplied USB to Micro USB connector. The
orange charging
LED will appear on the display.
2) When all 3 charging indicators are glowing solid orange, charging is
complete.
Charging USB plug device from Power Vault
1) Using your device’s original USB charging cable to connect to the Power
Vault’s USB output. Then the Power Vault’s charging LED will be on, and your
USB plug device would also indicate that it is being charged.
2) When your USB plug device is fully charged, disconnect the Power Vault.
3) When the Power Vault’s 3 LEDs are all off, it means the Power Vault is out of
power, and needs to be recharged.
Power LED indication:
When computer or a Micro USB adapter is charging the Power Vault:
LED indication while being charged
3LEDs on: fully charged
2LEDs on: 50% ~ 99%
1LEDs on: below 50%
When the Power Vault is charging a phone, tablet or any other USB device:
Power Status LED(pressing the switch)
3 LEDs on: 75% ~ 100%
2 LEDs on: 35% ~ 75%
1 LEDs on: below 35%
Remark: When the Power Vault is out of power, the last LED will keep flashing
for 5 times and then off, to remind you that it is out of power and needs to be
recharged.
Specifications：
Capacity: 6000mAh
Micro USB input: 5V/1A max
USB Output: 5V/1A
Dimensions: 71.5×51.5×22mm
Loading...