Juno JSV5960 User Manual

Geschirrspüler

Dishwasher

JSV 5960

Gebrauchsanweisung

Instruction booklet

Contents

For the user

Important safety information	30
Description of the appliance	31
The control panel	32
Before use	34
Setting the water softener	34
Rinse aid	36
Use of detergent	37
Using your appliance	38
Loading your appliance	38
Adjusting the height of the upper basket	39
Hints and tips	40
Washing programmes	41
Hints for test centres	42
Operating sequence	43
Maintenance and cleaning	45
Internal cleaning	45
Cleaning the central filter	45
Cleaning the large filter	45
External cleaning	46
Prolonged periods of non-operation	46
Frost precautions	46
Moving the machine	46
Something not working	47
Protection against flooding	48
Service and spare parts	48

For the installer

Installation instruction	49
Technical specifications	49
Water supply connections	50
Water outlet connection	51
Electrical connection	51
Building-in	52
Adjusting the height of the appliance	52
The furniture door	53
Fitting the vapour protection	54
Fixing to the adjacent units	54
Noise protection	55
Kitchen plinth adjustment	55

Guide to use the instrucion book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions

1. 2. 3. Step by step instructions

Hints and tips

29

PCO15/1GB

Important safety information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of safety. You MUST read it carefully before installing or using the appliance.

Installation

■This appliance is heavy. Care should be taken when moving it.

■It is dangerous to alter the specifications or attempt to modify this product in any way.

■Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

■Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

■Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

■Care should be taken when cleaning the bottom door seal and hinge area as any exposed metal edges may cut if care is not taken.

■This product should be serviced by an authorised Service engineer, and only genuine spare parts should be used.

■Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

Child safety

■This appliance is designed to be operated by adults.

Children should not be allowed to tamper with the controls or play with the product.

■Keep all packaging well away for children.

■Keep all detergents in a safe place out of children's reach.

During use

■Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.

■Under no circumstances should you open the door whilst the appliance is in operation. Always turn off the appliance before opening the door.

■Only use detergent specifically designed for use in dishwashers.

■When finishing loading or unloading close the door, as an open door can be a hazard.

■Do not sit or stand on the open door.

■Isolate the appliance from the power supply and turn off the water supply after use.

Conservation

In the interest of the environment:

■Materials marked with the symbol are recyclable.

■Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

■When the appliance is to be scrapped, cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside.

■Help to keep your country tidy - use authorised disposal sites for your old appliance.

30

PSI01GB

Description of the appliance

1
2	12
	11
3
4	10
5	9

8

7

6

IN75

1.	Levelling spacers	10.	Central filter
2.	Upper basket stop	11.	Upper spray arm
3.	Salt container	12.	Upper basket

4.Lower spray arm

5.Detergent dispenser

6.Control panel

7.Rating plate

8.Rinse aid dispenser

9.Large filter

31

PDA09GB

The control panel

1

2

In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be partially opened.

Audible signals have been introduced to help indicate which operations the dishwasher is performing.

Short "instruction accepted" signal

When any of the buttons are pressed: a short audible signal informs you that the machine has accepted the instruction given.

Long "programme run" signal

A continuous audible signal lasting about one second, heard only when you close the dishwasher door, informs you that the washing programme is starting.

Intermittent "end of programme" signal

An intermittent audible signal, lasting in total five seconds, informs you that the wash programme has ended.

If you wish to deactivate these audible signals, press both the "Eco dry" (Trocknen Aus) and "Delay start" (Startzeit) programme buttons together for about 3 seconds, until three short signals are heard.

3	4 5 6			7		8	9		10

1. "On/Off" pushbutton (Ein/Aus)

Press this button to preset the dishwasher to accept settings (selection of wash programme, economy drying, etc.).

When the wash programme has ended, the dishwasher stops automatically.

To switch off the dishwasher at the end of the programme, press this button again.

2. Programme guide

This is a summary of the "Washing programmes" chart to help you select the correct programme.

3. Salt refill indicator light

This light illuminates when the salt container needs refilling. This light will remain on in a soft water area where salt is not required.

4. Rinse aid refill indicator light

This light illuminates when the rinse aid container needs refilling.

SO240

To reactivate the audible signals, press both buttons together again for about 3 seconds, until the "short instruction accepted" signal is heard.

5. Digital display

6."Programme selector" button (Programm)

To select the required programme, press this button until the number corresponding to the chosen programme appears in the digital display (see "Washing programmes" chart).

32

PCP26/1GB

7. "Eco dry" button (Trocknen Aus)

When this button is pressed, the last rinse is not heated, with a significant saving in electrical energy.

The corresponding pilot light comes on.

If the pilot light is not on, the water of the last rinse will always be heated up to 65°C.

8. "Delay start" button (Startzeit)

Allows the start of the programme to be delayed by a minimum of 1 hour, up to 9 hours.

How to set the "Delay start":

When the button is pressed, the number "0" appears in the display.

Press the button again to select the number of hours by which you wish to delay the programme start, up to a maximum of 9.

E.g.: if you have selected number "2", the wash programme will start in 2 hours time.

To cancel the delay start set, press the button until the number "0" appears.

Close the dishwasher door to start the countdown: a long audible signal (about one second) informs you that the function is active.

You will see, in the display, how long there is to go (in hours) before the programme starts. A flashing dot in the digital display means that the delay start function has been activated.

Opening the door has no effect on a countdown which has already been started.

9. "Cancel programme" button (Löschen)

If you wish to cancel a programme which is already running or a setting which has just been made, press this button for about 2 seconds until the short "instruction accepted" signal is heard.

The programme selector light flashes, to indicate that the dishwasher has turned to reset mode and that a new programme and new options may be selected.

10. "Intensive" programme indicator light (Intensiv)

This pilot light comes on when the most energetic programme is selected (nr. 2 Intensive 70°c) with a hot prewash, suitable for pans and particularly dirty crockery.

33

PCP27/1GB

Before use

Before using your dishwasher for the first time:

1.ensure that the electrical and water connections comply with the installation instructions

2.remove all packaging from inside the appliance

3.set the water softener

4.pour 1 litre of water inside the salt container and then fill with salt

5.fill the rinse aid dispenser.

Setting the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these salts, the harder your water is.

Water hardness is measured in equivalent scales, for example German degrees, French degrees and PPM (parts per million).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 4.

If this level is not suitable for your area the softener should be adjusted.

To select a different level proceed as follows:

-Press the On/Off pushbutton on.

-Press the "Eco dry" (Trocknen Aus) and "Cancel" (Löschen) buttons simultaneously for about 5 seconds. The number "4" corresponding to the current level appears in the display.

-Press the "Eco dry" (Trocknen Aus) button as many times as necessary to make the required level appear in the display. The corresponding pilot light flashes to indicate that this button must be pressed. The level increases by 1 each time the button is pressed.

-5 seconds after this button has last been pressed, the dishwasher memorises the level selected and returns to the programme setting mode.

		Water hardness
Level	German	French		PPM
	degrees	degrees		(Parts per
	(°dH)	(°TH)		Million)
0	<4	0-8		0-80
1	5-8	9-14		81-140
2	9-11	15-20		141-200
3	12-17	21-30		201-300
4	18-22	31-40		301-400
5	23-28	41-50		401-500
6	29-33	51-60		501-600
7	34-39	61-70		601-700
8	40-45	71-80		701-800
9	46-67	81-120		801-1200

If your water is level 0 it is already soft and therefore there is no need to use salt.

With the setting of the water softener at level 0 the salt indicator light on the control panel will always remain off.

Use salt from level 1 upwards.

SO241

34

PBU08/1GB

Filling with salt

Only use salt specifically designed for use in dishwasher.

All other types of salt not specifically designed for use in dishwasher, specially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme).This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.To fill with salt, unscrew the cap of the salt container.

2.Pour 1 litre of water inside the container, or until it is full (this is necessary only before filling with salt for the first time).

3.Then using the funnel provided, pour in the salt until the container is full.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5.Screw on the cap tightly.

The salt container will require topping up periodically.

The "Salt" indicator light on the control panel will illuminate when the salt has finished, and requires refilling. The salt container has always some water inside which will normally overflow when refilling with salt.

The "Salt" indicator light can remain illuminated for 2 - 6 hours after salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the dishwasher is not affected.

SALE

SALT

SALZ

SEL

SR06

35

PFS07GB

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid:

1.Open the container by turning the lid (A) anticlockwise.

2.Add the rinse aid until the container is completely full (approx. 110 ml). The indicator

(B)will be completely dark.

3.Top up the rinse aid when the rinse aid indicator light on the control panel illuminates.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid department. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).

(Start from position 3).

Gradually increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes.

A

BR01

B
	x	6	5	4	3
m	a				2
					1
BR03

					C
	x	6	5	4	3
m	a				2
					1
BR02

36

PFR03/1GB