JUNO JB131D8 User Manual

JB131D8

User Manual

EN

Oven

CONTENTS

Safety information 2
Safety instructions 3
Product description 6
Control panel 6
Before first use 8
Daily use 9
Clock functions 11
Automatic programmes 13

Using the accessories 14
Additional functions 15
Hints and tips 17
Care and cleaning 27
Troubleshooting 30
Installation 32
Energy efficiency 33

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the result of
incorrect installation or usage. Always keep the instructions
in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it

appropriately.

• Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts are hot.

• If the appliance has a child safety device, this should be

activated.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

• Children aged 3 years and under must be kept away from

this appliance when it is in operation at all times.

2

General Safety

• Only a qualified person must install this appliance and

replace the cable.

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid
touching heating elements. Children less than 8 years of
age shall be kept away unless continuously supervised.

• Always use oven gloves to remove or put in accessories or

ovenware.

• Before carrying out any maintenance, disconnect the

appliance from the power supply.

• Ensure that the appliance is switched off before replacing

the lamp to avoid the possibility of electric shock.

• Do not use a steam cleaner to clean the appliance.

• Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can scratch the
surface, which may result in shattering of the glass.

• If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service
Centre or similarly qualified persons to avoid an electrical
hazard.

• To remove the shelf supports first pull the front of the shelf

support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.

SAFETY INSTRUCTIONS

Installation

WARNING! Only a qualified

person must install this
appliance.

• Remove all the packaging.

• Do not install or use a damaged
appliance.

• Follow the installation instruction
supplied with the appliance.

• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.

• Do not pull the appliance by the handle.

• Keep the minimum distance from the
other appliances and units.

• Make sure that the appliance is
installed below and adjacent safe
structures.

• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.

Electrical connection

WARNING! Risk of fire and

electrical shock.

3

• All electrical connections should be
made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.

• Always use a correctly installed
shockproof socket.

• Do not use multi-plug adapters and
extension cables.

• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by
our Authorised Service Centre.

• Do not let mains cables touch or come
near the appliance door, especially
when the door is hot.

• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.

• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.

• If the mains socket is loose, do not
connect the mains plug.

• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.

• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.

• The electrical installation must have an
isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation device
must have a contact opening width of
minimum 3 mm.

• This appliance complies with the E.E.C.
Directives.

Use

WARNING! Risk of injury,

burns and electrical shock or
explosion.

• This appliance is for household use
only.

• Do not change the specification of this
appliance.

• Make sure that the ventilation openings
are not blocked.

• Do not let the appliance stay
unattended during operation.

• Deactivate the appliance after each
use.

• Be careful when you open the
appliance door while the appliance is in
operation. Hot air can release.

• Do not operate the appliance with wet
hands or when it has contact with
water.

• Do not apply pressure on the open
door.

• Do not use the appliance as a work
surface or as a storage surface.

• Open the appliance door carefully. The
use of ingredients with alcohol can
cause a mixture of alcohol and air.

• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.

• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.

WARNING! Risk of damage to
the appliance.

• To prevent damage or discoloration to
the enamel:

– do not put ovenware or other

objects in the appliance directly on
the bottom.

– do not put aluminium foil directly on

the bottom of cavity of the
appliance.

– do not put water directly into the hot

appliance.

– do not keep moist dishes and food

in the appliance after you finish the
cooking.

– be careful when you remove or

install the accessories.

• Discoloration of the enamel or stainless
steel has no effect on the performance
of the appliance.

4

• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.

• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.

• Always cook with the oven door closed.

• If the appliance is installed behind a
furniture panel (e.g. a door) make sure
the door is never closed when the
appliance is in operation. Heat and
moisture can build up behind a closed
furniture panel and cause subsequent
damage to the appliance, the housing
unit or the floor. Do not close the
furniture panel until the appliance has
cooled down completely after use.

Care and cleaning

WARNING! Risk of injury, fire,

or damage to the appliance.

• Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.

• Make sure the appliance is cold. There
is the risk that the glass panels can
break.

• Replace immediately the door glass
panels when they are damaged.
Contact the Authorised Service Centre.

• Be careful when you remove the door
from the appliance. The door is heavy!

• Clean regularly the appliance to
prevent the deterioration of the surface
material.

• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do

not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.

• If you use an oven spray, follow the
safety instruction on it's packaging.

• Do not clean the catalytic enamel (if
applicable) with any kind of detergent.

Internal light

WARNING! Risk of electrical

shock.

• The type of light bulb or halogen lamp
used for this appliance is only for
household appliances. Do not use it for
house lighting.

• Before replacing the lamp, disconnect
the appliance from the power supply.

• Only use lamps with the same
specifications.

Disposal

WARNING! Risk of injury or

suffocation.

• Disconnect the appliance from the
mains supply.

• Cut off the mains electrical cable close
to the appliance and dispose of it.

• Remove the door catch to prevent
children or pets from becoming trapped
in the appliance.

Service

• To repair the appliance contact an
Authorised Service Centre.

• Use original spare parts only.

5

PRODUCT DESCRIPTION

General overview

7

5

6

5
4
3
2
1

21

4

3

1

Control panel

2

Electronic programmer

3

Heating element

4

Lamp

5

Fan

6

Shelf support, removable

7

Shelf positions

Accessories

• Wire shelf
For cookware, cake tins, roasts.

• Baking tray
For cakes and biscuits.

• Grill- / Roasting pan
To bake and roast or as pan to collect
fat.

CONTROL PANEL

Electronic programmer

21 3 4 5 6 7 8 9 10

Use the sensor fields to operate the appliance.

Sensor
Field

Function Description

1

- DISPLAY Shows the current settings of the appliance.

2

ON / OFF To activate and deactivate the appliance.

6

Sensor
Field

Function Description

3

OPTIONS To set an oven function or an automatic pro‐

gramme.

4

MY FAVOURITE
PROGRAMME

To store your favourite programme. Use it to have
access to your favourite programme directly or
when the appliance is deactivated.

5

TEMPERATURE /
FAST HEAT UP

To set and see the cavity temperature or the core
temperature sensor temperature (if present). If
you press and hold it for three seconds, it turns
the Fast heat up function ON or OFF. Straight ac‐
cess to the temperature setting of the first oven
function when the appliance is off.

6

UP, DOWN To move up or down in the menu.

7

OK To confirm a selection or setting.

8

OVEN LIGHT To activate or deactivate the lamp.

9

CLOCK To set the clock functions.

10

MINUTE MINDER To set the Minute Minder.

Display

A B C

DEFG

A. Oven function symbol
B. Temperature / time of day display
C. Clock / Residual heat display / Minute

Minder

D. Residual heat indicator
E. Indicators for the clock functions
F. Heat-up indicator / Fast Heat Up

indicator

G. Number of an oven function /

programme

7

Other indicators of the display:

Symbol Name Description

Functions You can choose an oven function.

Automatic programme You can choose an automatic programme.

My favourite programme The favourite programme operates.

/

kg / g An automatic programme with a weight in‐

put operates.

/

h / min A clock function operates.

Temperature / Fast heat up The function operates.

Temperature The current temperature is indicated.

Temperature You can change the temperature.

Light You deactivated the light.

Minute minder The minute minder function operates.

Heat up indicator

If you activate an oven function, the bars

come on in the display. The bars show
that the temperature in the appliance
increases or decreases.

When the appliance is at the set
temperature, the bars go off the display.

BEFORE FIRST USE

WARNING! Refer to Safety
chapters.

To set the Time of day refer to
"Clock functions" chapter.

Initial Cleaning

Remove all accessories and removable
shelf supports from the oven.

Refer to "Care and cleaning"
chapter.

Clean the oven and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial position.

Preheating

Preheat the empty appliance before first
use.

1. Set the function Top / Bottom Heat
and the maximum temperature.

2. Let the appliance operate for 1 hour.

3. Set the function True Fan Cooking

and the maximum temperature.

4. Let the appliance operate for 15
minutes.

Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure that
the airflow in the room is sufficient.

8

DAILY USE

WARNING! Refer to Safety
chapters.

Operating the appliance

To operate the appliance you can use:

• the manual mode

• automatic programmes

Oven functions

Oven function Application

True Fan Cook‐
ing

To bake on up to three shelf positions at the same time
and to dry food. Set the temperature 20 - 40 °C lower
than for Top / Bottom Heat.

Pizza Setting To bake food on one shelf position for a more intensive

browning and a crispy bottom. Set the temperature 20 ­40 °C lower than for Top / Bottom Heat.

Slow Cooking To prepare tender, succulent roasts.

Top / Bottom
Heat

To bake and roast food on one shelf position.

Frozen Foods To make convenience food like e.g. french fries, potato

wedges or spring rolls crispy.

Turbo Grilling To roast larger meat joints or poultry with bones on one

shelf position. Also to make gratins and to brown.

Fast Grilling To grill flat food in large quantities and to toast bread.

Grilling To grill flat food and to toast bread.

Moist Fan Bak‐
ing

To bake breads, cakes and cookies. To save energy dur‐
ing cooking. This function must be used in accordance
with the Moist Fan Baking table in order to achieve the
desired cooking result. To get more information about the
recommended settings, refer to the Hints and Tips chap‐
ter, Moist Fan Baking table. This function was used to de‐
fine the energy efficiency class acc. to EN 60350-1.

Keep Warm To keep food warm.

9

Oven function Application

Defrost This function can be used for defrosting frozen foods,

such as vegetables and fruits. The defrosting time de‐
pends on the amount and size of the frozen food.

Bottom Heat To bake cakes with crispy bottom and to preserve food.

ECO Roasting When you use this function during cooking, it allows you

to optimize the energy consumption. To get more infor‐
mation about the recommended settings, refer to the
Hints and Tips chapter, table with the equivalent function
(Turbo Grilling).

Setting the oven function

1. Activate the appliance with or .

The display shows the set temperature,
the symbol and the number of the oven
function.

2. Touch or to set an oven
function.

3. Touch or the appliance starts
automatically after five seconds.

If you activate the appliance
and do not set an oven function
or programme, the appliance
deactivates automatically after
20 seconds.

Changing the temperature

Touch or to change the
temperature in steps of 5 °C.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator goes
out.

Checking the temperature

You can see the temperature in the
appliance when the function or
programme operates.

1. Touch .
The Temperature / Time display shows
the temperature in the appliance.

2. Touch to go back to the set
temperature or the display shows it
automatically after five seconds.

Fast heat up function

Do not put food in the oven
when the Fast heat up function
operates.

The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if
Faulty tone is activated in the settings
menu. Refer to "Using the settings menu".

The Fast heat up function decreases the
heat up time.

To activate the Fast heat up function
touch and hold

for more than three
seconds.
If you activate the Fast heat up function,

the bars on the display

flash one by

one and comes on to show that the
function operates.

10

CLOCK FUNCTIONS

Clock functions table

Clock function Application

TIME OF DAY To show or change the time of day. You can change the

time of day only when the appliance is on.

DURATION To set how long the appliance operates.

END To set when the appliance deactivates.

TIME DELAY To combine DURATION and END function.

SET+GO To start the appliance with necessary settings with only

one touch of the sensor field any time later.

MINUTE MINDER To set a countdown time. This function has no effect on

the operation of the oven. You can set the MINUTE MIND‐
ER at any time and also when the appliance is off.

00:00 COUNT UP TIMER To set the count up, which shows how long the appliance

operates. This function has no effect on the operation of
the appliance. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not activated if DURA‐
TION and END are set.

Setting and changing the time

After the first connection to the mains, wait
until the display shows and 12:00. "12"

flashes.

1. Touch or to set the hours.

2. Touch or .

3. Touch or to set the minutes.

4. Touch or .

The display shows the new time.
To change the time of day touch again
and again until

starts to flash.

Setting the DURATION

1. Set an oven function and temperature.

2. Touch again and again until

starts to flash.

3. Use or to set the minutes for
DURATION time.

4. Touch

or the DURATION time

starts automatically after 5 seconds.

5. Use or to set the hours for
DURATION time.

6. Touch . The DURATION time starts
automatically after 5 seconds.

When the set time ends, an acoustic
signal sounds for 2 minutes. and time

setting flash in the display. The appliance
deactivates.

7. Touch a sensor field to stop the
acoustic signal.

8. Turn off the appliance.

Setting the END

1. Set an oven function and temperature.

2. Touch again and again until

starts to flash.

3. Use or to set the END and
or to confirm. First you set the

minutes and then the hours.

When the set time ends, an acoustic
signal sounds for 2 minutes. and the

11