Junlan Electronic TSB501M User Manual

BLUTHTOOTH ENTERTAINMENT SPEAKER SYSTEM

INSTRUCTION MANUAL

MODEL:927032

PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE

Contents

Safety Information

Important safety information
Assembling the unit

Assembling the unit
Assembling the unit

Assembling the unit on wall

Assembling the unit on wall

Functions and Controls

Overview of controls

User Instructions

Making the connections

General operation

Time setting
Alarm setting
Snooze
Sleep timer
Dimmer

FM/AM operation

BT operation

Paring and connecting

During playing

CD/MP3 operation

During playing

Programme.procedure

USB operation

During playing

Care and Maintenance

Troubleshooting

Technical Specications

FCC statement
Limited Warranty

2

3

3

4

4

5

5

6

6

7

7

8

8

9

10

10

10

10

10

10

10

10

11

11

11

11

11

11

11

11

11

11

11

12

12

13

14

15

16

1

Safety Information

Important –

Please read these instructions fully before installation

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE ANY COVER. NO
USER-SERVICEABLE PARTS INSIDE, REFER
ANY SERVICING TO QUALIFIED SERVICE
PERSONNEL.

• Please read this owner’s guide

• Please take the time to follow the instructions in this

owner’s guide carefully. It will help you set up and
operate your system properly and enjoy all of its
advanced features.

• Please save this owner ’s guide for future reference.

• The product label is located on the back of the

product.

• This product must be used indoors. It is neither
designed nor tested for use outdoors, in recreation
vehicles, or on boats.

• Heed all warnings - on the product and in the

owner’s guide.

• Do not use this apparatus near water or moisture.
Do not use this product near a bathtub, washbowl,
kitchen sink, and laundry tub, in a wet basement,
near a swimming pool, or anywhere else that water
or moisture is present.

• Only use at tachments/accessories specied by the

manufacturer.

• Unplug this apparatus during lightning storms or

when unused for long periods of time - to prevent

damage to this product.

• Refer all servicing to qualied ser vice personnel

• Servicing is required when the apparatus has

been damaged in any way: such as liquid has been
spilled or objects have fallen into the apparatus; the
apparatus has been exposed to rain or moisture,
does not operate nor mally, or has been dropped -
Do not attempt to ser vice this product yourself.
Opening or removing covers may expose you to
dangerous voltages or other hazards.

• To prevent risk of re or electric shock, avoid

overloading wall outlets, extension cords, or integral
convenience receptacles.

• Use proper power sources - Plug the product into a

proper power sourc e, as described in the operating
instructions or as marked on the product.

• The mains plug is used as the disconnect device, the
disconnect device shall remain readily accessible

CAUTION

RISK OF ELECTRIC SHOCK!

DO NOT OPEN!

This symbol means that this unit is double
insulated. An earth connection is not required.

CAUTION : CLASS 1 LASER PRODUCT

Use of contents or adjustments of performance of

procedures other than those specied Herein may result

in hazardous radiation exposure.

LASER SAFETY

This unit employs a laser, only qualied service

personnel should attempt repair.

DANGER: Invisible laser radiation when open and
interlock failed or defeated avoid direct exposure to beam.

CAUTION: hazardous laser radiation when open and
intelock defeated.

Disc handling

• Do not touch the playback side of the disc.

• Do not attach paper or tape to disc.

• Fingerprints and dust on the disc cause picture and

sound deterioration. Wipe the disc from the centre
outwards with a sof t cloth. Always keep the disc
clean.

• If you cannot wipe of f the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth

and nish with a dry cloth.

• Do not use any t ype of solvent such as thinner,
benzene, c ommercially available cleaners or
antistatic spray for vinyl. It may damage the disc.

• Do not store discs in a place subject to direct sunlight
or near heat source.

• Do not store discs in a place subject to moisture and

dust such as a bathroom or near a humidier.

• Store discs vertically in a case, stacking or placing
object on discs outside or their case may cause
warping.

2

IMPORTANT SAFETY INSTRUCTION

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7.Do not block any ventilation openings.

Install in accordance with the
manufacturer’s instructions.

8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including ampli¿ers) that
produce heat.

9. Do not defeat the safety purpose of
the polarized or grounding - type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. When the
provided plug does not ¿W into your outlet,
consult an electrician for replacement of
the obsolete outlet.

10. Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

11. Only use attachments/accessories
VSHFL¿HGE\WKHPDQXIDFWXUHr.

12. Use only with a cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.

13.Unplug this apparatus during lightning
storms or when unused for long periods of
time.

14. Refer all servicing to TXDOL¿HG service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.

Additional Warnings

 The apparatus shall not be exposed to
dripping or splashing and that no objects
¿lled with liquids, such as vases, shall be
placed on apparatus.

 Main plug is used as disconnect device
and it should remain readily operable
during intended use. In order to disconnect
the apparatus from the main completely,
the main plug should be disconnected from
the main socket outlet completely.

Battery shall not be exposed to excessive

KHDWVXFKDVVXQVKLQH¿UHRUWKHOLNH

 Caution marking is located at the rear or
bottom of the apparatus.

The marking information is located at the
rear or bottom of apparatus.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER­SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock to persons.

3

The exclamation point within an equilateral
triangle is intended to alert the user to the
(servicing) instructions in the literature
accompanying the appliance.

presence of important operating and maintenance

ASSEMBLING THE UNIT

step one

step one

---insert the pipe from the bottom of the stand and fix it with screws supplied

4

ASSEMBLING THE UNIT

step two

step two

---Insert the wire
until out of the bottom of stand

5

into the steel pipe

ASSEMBLING THE UNIT

step three

step four

step three

---insert the upper part of the unit into the steel pipe

---then use screw to fix two parts

step four

---pull wire straight

---use rubber brackets and screws to fix the wire

---assembling is done
6

to the bottom of the stand

ASSEMBLING THE UNIT ON WALL

Step one: drilling holes according to the size in Fig 1

Step two: after drilling holes,insert the wall plug,

fix the metal bracket on the wall with screw.

7

ASSEMBLING THE UNIT ON WALL

Step three: then fixing the bracket at the back of the unit.

Step four: after fixing the bracket at the back of the unit, hang the unit on the wall.

8

Functions & Controls

542 31

14 15 16

Please familiarize yourself with the parts and accessories listed below

Accessories included

● 1 x Instruction manual ● 1 x RCA cable

● Wall mount brackets and scews

Overview of controls

- VOLUM E +

ALARM

SOURC E SNOOZ E

1 x AUX IN cable with 3.5mm stereo plaug

●

●1 x Remote control (with battery)

542 31

AUX IN 1

6

USB PLAYE R

TUN-

TUN+

TIME- AM/FM

TIME+ PAIR

7 8 9 10 11

EJECT

1. Power standby

2. Volume down

3. Volume up

4. Alarm

5. Source display

6. Snooze

[ ]

(

( [] Tune down/ previous

7.

[ ]

8.

Tune up/ next

/ time +

/ time -

9. AM/FM Radio

10. Play/ pause /Pair button/Time set

[ ]

11. Disc eject

9

Overview of controls

542 31

12

27

13

28

14

15

2

1

29

30
31

32

16

17

TIME

33

34
35

18

36
37

38

19
20

21
22

23

39
40

41

42
43
44
45

24
25
26

Power standby

12.

13. Mute

14. AM/FM

15. USB source

16. Program

[ ]

17.

( [] Tune down/ previous

18.

Play/ pause

Volume down

19.

Time -

20.

21. AM/FM scan

22. ST/MO

[Stereo / mono]

23.

EQ

24.

Dimmer

25.

Sleep

26.

Snooze

27.

Disc eject

28.

CD source

29.

Bluetooth

30.

AUX2 source button

31.

AUX1 source

32.

Radio preset recall

Memory

33.

[ ]

Tune up/ next

34.

10

/ time +

35.

Time

36.

Stop

Radio preset recall

37.

38.

Time + button

39.

Volume up

40.

Alarm

41.

Bluetooth pairing

42.

Random

43.

Repeat

Bass up

44.

Bass down

45.

User Instructions

Making the connections

AUX AUDIO CONNECTION

Using a 3.5mm audio cable ( supplied), it is
possible to connect an external audio device
EG:- MP3 player to the unit .

NOTE: This function requires the AUDIO
CONNECTION to be made to an external amplier.

This will NOT work connected to a TV input.

1. Connect a 3.5mm cable into the AUX IN 1 input

socket on the control panel.

2. Connect the other end to your audio devices

headphone output or Line-out.

AUX IN 1

MP3 PLAYER

3. Press the SOURCE

appears on the display.

button until AUX IN 1

4. Press PLAY on the external audio source EG:-
MP 3 player.

NOTE: The audio output level is effected by the
volume on the source EG: MP3 player so make

sure that is set to about 70- 80% (not too loud to
avoid distortion).

5. Adjust the VOLUME control on the amplier to
set the main volume level.

Using a RCA audio cable ( supplied), it is
possible to connect an external device
EG:- DVD player / VCR to the unit.

L R

Audio Output
Jacks on the

DVD / VCR / DVR

Red

DVD Player

White

AUX IN 2

Red

1.Connect the AV cable to the Audio Output Jacks
(White Jack=L,
and Audio Input Jacks on the rear of

Red Jack=R) on DVD player

the unit.

NOTE:

A TV can also be connected to watch video files in

the

DVD player/VCR/DVR and etc.

2.Press button until AUX 2 appears on the

SOURCE

display.

3. Activate the external device.

General operation

Time setting

1. Place the unit into Standby mode.

2. Hold TIME button on the remote control to start
the time setting.Then "12Hr"or "24Hr" will appear

on

screen and the hour digit will flash.

3. Press TIME +/- button to set 12h or 24h.

Then press TIME button to confirm.

4. PressTIME +/- to set hour and press

"TIME" to

confirmand minute digit will flash..

5. Press TIME +/- to set minute digit.Press "TIME"
to confirm.

Alarm setting

1. Place the unit into Standby mode.

ALARM

2. Hold button on the remote control to
activate the alarm setting.

3. Press and button to adjust the hour

and the minute. Then press button to confirm.

4. Press or button to select the alarm
rings as FM ("F")or buzzer("b"). Then press

TIME+ TIME-

TIME+

button

to confirm.

ALARM

TIME-

ALARM

5. Press "TIME +/-" to set alarm volume level.

Snooze

Snooze Snooze Snooze

When the alarm rings, press

Snooze Snooze Snooze Snooze Snooze Snooze Snooze Snooze button to turn Snooze
off the ring and 9 minutes later, the alarm will ring
again.

Sleep timer

During playback, press button repeatedly

to set the
reaches, the

The duration

playback duration and after the time

unit will automatically turn itself off.
ranges from 10-90 minutes.

SLEEP

Dimmer

Press button to adjust the display

DIMMER

brightness.

11

FM/AM operation

CD/MP3 disc operation

1. Press until radio FM or AM appears

2. Press the button to switch between AM AM/FM

3.

4. Press button, then PX will appear on the

5. Press or button to listen to the preset
stations.

NOTE:

- Press button on the remote control to
search and store the stations automatically.

-The radio will automatically receive FM radio
broadcasts in stereo (when available). Alternatively,

you can manually set the radio to mono mode by

pressing ST/MO button on remote control.

strength

1. Press button until bt appears on the display

2. Activate the Bluetooth connection on the external
device.

3. When appears on the list,

4. bt on the display will be solid light,

NOTE:

during connecting.

AM/FM

on the display.

and FM.

Hold and button search for the

TUNE+ TUNE-

stations. When a station is found, the unit will
stop and start playing.

MEM

display. Press or button to select the
place you want the station to be stored. Then
press button again to store.

MEM

BT operation

Paring and Connecting

after a beep sound, the unit will start to search
for the last conncted device if it is found. If it is
not found,the unit will search for other devices.

M+ M-

M+ M-

SCAN

the signal

is low, and background noise level is high.

BT

"SOUNDLOGIC DES"

choose to

is estalished.

pair with it.

when connection

Enter 0000 when asked for a password

1. Press button until CD appears

2.Load the disc,it will play automatically.

3. Press button to eject disc when finished.

During Playing

-Press and button to skip to the previous or
next track.

-Press button to pause the playback, press again

to resume the playback.

-Press button to stop the playback

-Press button to turn on or enter or exit the

random playing.

-Press button to perform the repeat playback.

-Press button to play the contents in the pre-

selected order.

1.During CD/MP3 playing, press STOP, then press

CD

on the display.

(

RAN

REP
PROG

Programme procedure

PROG, “PRO ” will display on screen.

2.Press PREV/NEXT to select the track needed to
programme, at the same time, the selected
display on screen, the press PROG to confirm.

Note: If do not press PREV/NEXT

at this time, programming function will

exit after 20 seconds,

3.If continuing to add tracks, repeat number 2

operation.

4.To complete programming, press PLAY to start
playing the programmed tracks.

cancel programming.

the character

to select track

Press STOP twice to

tracks

automatically

disappear.

PAIR

5. Hold button on the control panel or press
button on the remote control to disconnect

PAIR

During Playing

-Press and button to skip to the previous or
next track.

(

-Press button to pause the playback, press again

to resume the playback.

buttons may not work with all

NOTE:

the Bluetooth sources.

(

12

USB operation

1. Press the button until USB appears
on the display.

2. Insert the USB device into the USB port. Then

it will start playing.

During Playing

-Press and button to skip to the previous or
next track.

-Press button to pause playing, press again

to resume the play.

-Press button to stop the play, Press again

to resume.

USB

(

Care & Maintenance

Impor tant: Always unplug the appliance from the power socket during cleaning and

maintenance.

• Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax

polish for cleaning.
Clean the external sur faces with a damp sof t cloth only. Never use abrasive products or solvents as it

•

may damage the appliance.

Troubleshooting

Problem Reason(s) Solution(s)

No Power ● Power cable not co nnecte d to wall soc ket

● Standby mode act ive

● Make sure t he plug is c onnec ted

● Press th e STANDBY but ton to wake the unit

Disc wi ll not pl ay

No sound ● Volume co ntrol set t o minimum

Disc playing error

Remote not working ● Replace the battery with two new 2 x AAA batteries .

● Disc not i nsert ed corr ectly

● Defect ive disc

● Moistu re on disc

● Non standard dis c

● Lens is dir ty

● The unit requires r esett ing

● Defect ive disc

● Audio connect ions not c orrec t

● Defect ive disc ● Try another disc

● Battery is exhausted

● Remove and re-load the disc with the label

facing upwards

● Try another disc

● Wipe, clean and try again

● Use a disc bearing t he stand ard logo

● Use a CD len s cleaner

● Disco nnect from the mains power for 30

seconds, and re-connect and try again.

● Increa se the volume level

● Try another disc

● Check the Audio c onnect ions to th e TV or AMP

13

9

Technical Specications

General

Power source

Audio output

BT working range

AUX inpu t Ø 3.5mm stereo headphone jack

USB File system
USB max c apacity

FM coverage
AM coverage

AC 120V~60Hz

30W

32 feet

FAT 16 / FAT 32
32GB

87.5 - 108 MHz

8

520 - 1710 KHz

14

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.

15

LIMITED WARRANTY

This manufacturer's product warranty extends to the original consumer purchaser

of the product. Neither the retailer nor any other company involved in the sale or
promotion of this product is a co-warrantor of this manufacturer warranty.

WARRANTY DURATION:

This product is warranted against defective meterials or workmanship. This warranty

is void if the product has been damaged by accident,in shipment, unreasonable use,

misuse, neglect,improper service, commercial use, repairs by unauthorized personnel

or other causes not arising out of the defects in material or workmanship. This warranty

does not cover the following which may be supplied with this product, including but
not limited to ;LCD Screens, glass parts,lenses,etc. This warranty is effective only if

the product is purchased and operated in USA, and does not extend to any unit
which have been used in violation of written instructions furnished by manufacturer
or to units have been altered or modified or, to damaged products products or parts

thereof which have had the serial number removed, altered, defaced or rendered
illegible.

WARRANTY DISCLAIMERS:

This waaranty is in lieu of all warranties expressed or implied and no representative
or person is authorized to assume for manufacturer any otehr liability in connection

with the sale of our products. There shall be no claims for defects or failure under
any theory or tort, contractor commercial law including but not limited to, neglience,
gross neglience, strict liability, breach of warranty and breach of contract.

WARRANTY PERFORMANCE:

During the above 90 day warranty period, a product with a defect will be repaired or
replaced with a reconditioned comparable model (at manufacturer's option). The

repaired or replacement product will be in warranty for the balance of the 90 day

warranty period and an additional one-month period. No change will be applicable

for such repair or replacement.

SERVICE AND REPAIR:
If service is required for this product, you should first contact Midwest Trading Group

Customer Service at [e-mail] or by calling 1(866)851-4714,

Monday to Friday 9am to 5pm CST.

NOTE:
Manufacturer can not assume responsibility for loss or damage during incoming
shipment. As a recautionary measure, carefully package the product for shipment

and insure it with the carrier. Be sure to enclose the following details with the product:

your full name, return address and daytime phone number, a note describing the

problem you experienced, a copy of your sales receipt or other proof of purchase

to determine warranty status. C.O.D. shipments can not be accepted.

16