Junlan Electronic SBB78133 User Manual

Download

MODEL:WMSMCZ3H / WMSMCZ3H-SB

PAIR

- INSTALLATION AND OPERATION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY

AND KEEP FOR FUTURE REFERENCE

TABLE OF CONTENTS

INTRODUCTION...............................................................................................3

FEATURES........................................................................................................

PARTS INCLUDED WITH MAIN UNIT..............................................................

IMPORTANT SAFETY INSTRUCTIONS..........................................................

PLACING AND MOUNTING..............................................................................

GENERAL VIEW...............................................................................................

SPEAKER/POWER WIRE SOCKET DIAGRAM...............................................

REMOTE CONTROL......................................................................................

BATTERY INSTALLATION--REMOTE CONTROL........................................

GENERAL OPERATIONS..............................................................................

LISTEN TO FM RADIO...................................................................................

BLUETOOTH PAIRING AND PLAYBACK......................................................

ADDING OPTIONAL EXTERNAL SUBWOOFER...........................................

CONNECT USING OPTICAL..........................................................................

CONNECT TO TV(ANALOG)..........................................................................

CONNECT USING HDMI IN............................................................................

CONNECT USING HDMI OUT........................................................................

AUX IN............................................................................................................

3 3 4

6 7

10 11

13 14 15 16 17

18 19

USB.................................................................................................................

TROUBLESHOOTING GUIDE.......................................................................

SPECIFICATIONS..........................................................................................

20 21

INTRODUCTION

Thank you for choosing a Connexx product. We hope you will find the instructions

in this owner's manual clear and easy to follow. If you take a few minutes to

review, you will learn how to use all

the features of your new media center

for maximum enjoyment.

FEATURES

Features of the

WMSMCZ3H

media center include:

Digital FM tuner w/10 presets Bluetooth wireless technology 3 zone audio distribution HDMI (ARC) on rear panel

HDMI IN on front panel

3.5 mm aux input jack on front panel USB input on front panel w/device charging capabilities

Digital Optical input on rear panel Analog Stereo Input on Rear Panel LED backlit controls

Wireless remote control included

PARTS INCLUDED WITH MAIN UNIT

ARC

TUNE+

User Manual

TUNE-

PAIR

AAA

User Manual

screw cover

Remote Control with Two Batteries

DC Power Extension

(Red and Black) Wire

Wire Harness for Speakers

FM Antenna

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDU CE TH E RISK OF EL ECTRIC SH OCK, DO NO T RE MOV E COVER (OR BACK). NO USERSE RV IC EA BL E PARTS IN SI DE . REFER SER VI CI NG TO QUA LIF IED SE RV ICE PERSONNEL.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a Class B digital devic e, purs uant to part 15 of the FCC Rules. These limits are designed to provide rea s ona b le pro tect ion aga inst ha rmfu l interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, ma y cause har mful interference to radio communications.

guarantee that in a particular

does cause television reception,

which can be determined by

turning the equipment off and

the user is interference by

However, there is no

interference will not occur

installation. If this equipment

harmful interference to radio

on,

encouraged to try to correct the

one or more of the following

measures:

● Reo r ien t o r rel oca t e the re cei v ing

antenna. Increase the separation between the equipment and receiver.

● Connect the equipment into an ou tlet

with a circuit different from that to which the receiver is connected.

● Consult the dealer or an ex per ienced

radio/TV technician for help.

FCC WARNING:

To assure continued compliance, follow the attached installation instructions and use only

shielded cables when connecting to other devices. Modifications not authorized by the

manufacturer may void user`s authority to operate this device.

The lighting flash with arrowhead symbol within an

equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

DANGER: In visibl e an d hazard ou s laser

radiation when open and interlock

fa iled or defea ted. Avoid direc t exposure to beam.

WARNING:

TO R E DUCE THE R I SK O F FIR E OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

TO R E DUCE THE R I SK O F FIR E OR ELECTRIC S H O CK, A ND A NNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.

1 ) Read these instructions

All the safety and operating instructions should be read before the product is operated.

2 ) Keep these instructions

The safety and operating instructions should be retained for future reference.

3 ) Heed all warnings

All warnings on the pr odu ct an d in th e operating instructions should be adhered to.

4 ) Follow all instructions

All operating and use instructions should be followed.

5 ) Do not use this apparatus near water

Do not use this produc t ne ar wat er and moi stu re, for example: near a bat htu b,

washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.

6 ) Clean only with dry cloth

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.

7 ) D o n o t b l o c k a n y v e n t i l a t i o n openings. Install in accordance with the manufacturer's instructions

Slots and openings in the cabinet and in the

back or bottom are provided for ventilation, to

ensure reliable operation of the product and to protect it from overheating. These openings

must not be blocked or covered. The openings should never be blocked by placing the product

on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation

such as a bookcas e or rack unless pr oper

ventilation is provided or the manufacturer's instructions have been adhered to.

8 ) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.

9 ) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

13 ) Refer all servicing to qualified service personnel. Servicing is required when the

apparatus

as powerhas

apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.

14 ) Power source

This product should be operated only from the

type of power source indicated on the marking

label.

supply

dealer or intended source,

15 ) Service

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Ref er al l ser vic ing to qua lif ied se rvi ce personnel.

WARNING:WARNING:WARNING:

WARNING:

has been damaged in any way, such

supply cord or plug is damaged,

If you are not sure of the type of power

to your home, consult your appliance

local power company. For products

to operate from battery power, or other

refer to the operation instructions.

liquid

the been objects have fallen into or spilled

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing such as

and that objects

filled with liquids,

vases shall not be placed on

apparatus.

10 ) Pr ot ect the po wer co rd from being

wal ked on or pinched particularly at plugs,

convenience they exit from

11 ) Only us e at tac hment s/a cc ess ories

specied by the manufacturer.

12 ) Unplug this apparatus during lightning storms or when unused for long periods of time

To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.

due to

receptacles, and the point where

the apparatus.

This will prevent damage to the product

lightning and power-line surges.

PLACING & MOUNTING

1. Placing

When placing the media center in any type of enclosed space, be sure to allow space

around it for ventilation.

If placing in a tight space without ventilation, heat generated from the unit could produce

a potential heat hazard.

2. Mounting

Rough opening cut-out

(WMSMCZ3H)........................................................10 5/8(Width) x 3 3/4(Height) x 5 5/8(Depth) in

(WMSMCZ3H-SB)..................................................28 3/4(Width) x 3 3/4(Height) x 5 5/8(Depth) in

about 140mm (5 5/8 in )

Front View

7 8

GENERAL VIEW

PAIR

5 6

1. Zone A touch button

2. Zone C touch button

3. Display

4. Remote sensor

5. Previous touch button

6. Volume up touch button

7. Source touch button

8. PAIR touch button

Display

AUX

OPTICAL

9. Zone B touch button

10. Next touch button

11. Play/pause, Station recall touch button

12. Volume down touch button

13. Power on/off button

14. USB port

15. AUX IN jack

16. HDMI IN port

USBUSBUSBUSBUSBUSB

HDMI ARCHDMI ARC

1. Mode

2. Audio zone

3. Mute

4. FM frequency

Rear View

HDMI OU T

(ARC )

TV AUDI O IN

3 4 5 6 7

1. HDMI OUT (ARC) jack

2. ANTENNA jack

3. TV AUDIO IN jacks

4. EXT IR jack

OPTICAL IN

EXT IR

5. OPTICAL IN jack

6. EXTERNAL SUBWOOFER connector

7. Power/speaker wire harness socket

SPEAKER/POWER WIRE SOCKET DIAGRAM

GRAY - B RIGHT +

SPEAKER (6X4-ohms) WIRING COLOR CODE GUIDE

CAUTION!

Connecting the speakers

incorrectly will cause distortion

and damage the power

amplifier.

BLACK - POWER GND

RED - POWER IN 12V +

BLUE/BLACK - A RIGHT -

WHITE - B LEFT +

BLUE - A RIGHT +

WHITE/BLACK - B LEFT -

ORANGE/BLACK - A LEFT -

10A FUSE

RED - POWER IN 12V +

10A FUSE

VIOLET - C RIGHT +

GREEN/BLACK - C LEFT -

VIOLET/BLACK - C RIGHT -

GREEN - C LEFT +

ORANGE - A LEFT +

GRAY/BLACK - B RIGHT -

GRAY - B RIGHT +

12V DC

Power

Extens ion

BLACK - POWER GND

REMOTE CONTROL

1. Power on/off button

2. Zone A button

3. Zone B button

4. Source button

5. TUNE + button

6. Previous button

7. TUNE - button

8. PAIR button

9. EQ button

10. ARC (audio return channel) button

11. Zone C button

12. Mute button

13. Next button

14. Play/pause, preset button

15. VOL+,VOL- button

2 3

4 5

6 7

PAIR

TUNE+

TUNE-

ARC

10 11 12

Optional External Remote Sensor

EXT IR (External Remote Sensor) Jack

If using the external optional remote sensor, insert the plug into the EXT IR Jack as the

arrowhead shown on above picture. This will allow the remote control to work in another zone if desired.

on rear panel

BATTERY INSTALLATION--- REMOTE CONTROL

Battery Installation

1.Slide and lift the battery door (Figure 1).

2.Install 2 (two) AAA size batteries into the battery compartment as indicated (Figure 2).

3.Replace the battery door (Figure 3).

Battery

Battery Precaution

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.

2. Be sure to follow the coorrect polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device.

3. Do not mix different types of batteries together(e.g. Alkaline and Carbon-zinc) or old batteries

with fresh ones.

4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer's instructions).

6. The batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.

7. Clean the battery contacts and also those of the device prior to battery installation.

by the polarity markings

Remote Control Effective Range

When there is an obstacle between the unit and the remote control, the

remote control may not operate properly.

When direct sunlight, an

incandescent lamp, fluorescent

lamp or any other strong light

shines on the remote sensor

of the unit, the operation of remote

control may be unstable.

PAIR

16 Feet (5M)

ARC

TUNE+

TUNE-

PAIR

GENERAL OPERATIONS

1. Press the button on the unit or remote control to power on the unit from standby mode.

2. Press the button on remote control or touch the button on unit repeatedly to switch to desired mode as listed:

BT TV AUX FM OPTICAL USB

NOTE: USB mode will be selected when the USB device is inserted.

3. During Playback:

~ Press the VOL+/VOL- buttons on the remote control or touch the + or - button on the unit to adjust

volume level as desired.

HDMI ARCHDMI ARC

~ Press button on the remote control to mute the sound on all active zones.

~ Press A, B or C button on the remote control or touch A, B or C button on the unit to switch

~ Press the EQ button on remote control repeatedly to set to different EQ mode.

4. When finished listening, press the button on the unit or remote control to power off the unit.

5. If the unit is not used for long period of time, please disconnect power.

Press again to resume.

ON or OFF the corresponding ZONE A/B/C speakers.

LISTEN TO FM RADIO

BEFORE OPERATION

Insert the Antenna into

the ANTENNA Jack on rear

SEARCHING STATION

1. Power ON the unit.

2. Press the button on remote control or touch the button on unit repeatedly to switch to FM mode, the FM frequency

will appear on the display.

3. Touch and hold the or button on front of the unit or press and hold the TUNE- or TUNE +

button on remote control, then release the button to search the previous or next available FM

station automatically, when a station searched, it will playback automatically.

4. Touch the or button on front of the unit or press the TUNE- or TUNE+ button on remote control to fine tune.

panel as illustrated as below.

STATIONS STORAGE THROUGH THE TOUCH BUTTON ON UNIT

When a station searched, touch and hold the button to display the storage location

(such as Pxx, the xx stands for 01-10), then press

storage location,

touch and

hold the button to confirm and complete station storage.

button to change and select the desired

A total of 10 stations can be stored into the unit's memory.

STATIONS STORAGE THROUGH THE BUTTON ON REMOTE CONTROL

When a station searched, press and hold the button to display the storage location

(such as Pxx, the xx stands for 01-10), then press the desired storage location,

press and

hold the button to confirm and complete station storage.

button to change and select the

A total of 10 stations can be stored into the unit's memory.

PRESET RECALL

Touch the button on the unit or press the on remote control repeatedly to select the

preset stored station and playback.

FM Antenna

The antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and extend the wire or relocate the unit to improve the radio reception.

BLUETOOTH PAIRING AND PLAYBACK

1. Power ON the unit.

2. Press the button on remote control or touch the button on unit repeatedly until "BT"

appears on display and

blinks, now it is in BT pairing mode.

3. Activate the external BT Device and enter BT searching mode. Start instructions on the external BT Player.

For details pairing procedures, please refer

4. When the external BT Device searched the unit, will appear on the display of the external BT Device, select it and make connection.

5. After successfully paired and connected, the "BT" on display will stay lit.

6. If you want to connect with other BT device, press the PAIR button on remote control or touch the PAIR button on the unit to disconnect the current pairing and connection, then try to pair and connect with other BT device.

During playback:

Press the VOL+/VOL- buttons on the remote control or touch the + or - button on the unit to adjust

volume level as desired.

NOTE:

After pairing for the first time, the unit will remember and automatically connected device when the bluetooth of the

to the user's manual of your BT Device.

'WMSMCZ3H'

device and the unit are activated within range.

pairing as the screen

pair with the last

ADDING OPTIONAL EXTERNAL SUBWOOFER

NOTE: Before connecting, please disconnect power.

1. Connect one end of subwoofer connection cable ( not supplied ) to the "+" Jack on the rear of the unit as the figure above.

2. Connect the other end to the "-" Jack on the rear of the unit as the figure above.

3. Power ON the unit.

4. Play the music as usual and set the desired volume.

CONNECT USING OPTICAL

External DVD player

OPTICAL OUT

Optical Cable(Not Supplied)

NOTE: Before connecting, please disconnect power.

1. Connect one end of optical connection cable ( not supplied ) to the OPTICAL IN jack on the rear of the unit as pictured above.

2. Connect the other end to the OPTICAL OUT jack on DVD PLAYER.

3. Power ON the unit.

4. Press the button on remote control or touch the button on unit repeatedly until "OPTICAL"

appears on display.

5. Set the desired volume.

R L

Red

TV AUDIO IN

CONNECT TO TV (ANALOG)

White

Audio Out Jacks of

L R

Audio Cable(Not Supplied)

Red

NOTE: Before connecting, please disconnect power.

1. Connect as the figure above.

2. Power ON the unit.

3. Press the button on remote control or touch the button on unit repeatedly until " TV "

appears on display.

4. Play the audio or video as usual and set the desired volume.

TV audio is selected and will play through the unit.

TV/DVD/VCR/DVR

To HDMI IN on front

of the unit

CONNECT USING HDMI IN

HDMI OUT

(ARC)

To HDMI OUT (ARC)

on rear of the unit

STEP ONE

To HDMI OUT on

the DVD player

OPTICAL OUT

External DVD player(not supplied)

STEP TWO

To HDMI IN(ARC)

on TV

TV not supplied

NOTE: Before connecting, please disconnect power.

1. Connect as the figure above.

2. Power ON the unit, the external DVD player and the TV.

3. Press the button on remote control or touch the button on unit repeatedly until " HDMI "

appears on display.

4. Play the audio CD through external DVD player if only connected like STEP ONE. Play the DVD through external DVD player when connected like STEP ONE and STEP TWO.

NOTE:

The sound setting in DVD player must be set to PCM format.

HDMI OUT

(ARC)

CONNECT USING HDMI OUT

HDMI Cable (not supplied)

NOTE: Before connecting, please disconnect power.

1. Connect as the figure above.

2. Power ON the unit.

3. Press the button on remote control or touch the button on unit repeatedly until " ARC " appears on display.

4. Play the audio or video through TV as usual and set to the desired volume.

NOTE:

The TV must have the ARC capability, and connected to HDMI ARC jack on capable TV.

No matter which mode the unit is in, press the ARC button on remote control to switch back to ARC mode.

To HDMI IN on TV

AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES

AUX IN cable not included

MP3

To the Phones/Aux Out/Line Out Jack on the external audio device

1. Connect one end of audio connection cable to the AUX IN jack on the front of the unit as

illustrated above.

2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as

iPod, iPhone, iPad, MP3 player, smart phone... etc. )

3. Power ON the unit.

4. Press the button on remote control or touch the button on unit repeatedly until " AUX " appears on display.

5. Play the music in the external player as usual and set the desired volume.

smart phone

USB : LISTEN TO EXTERNAL AUDIO DEVICES

1. Insert the USB device.

2. Power ON the unit.

3. Press the button on remote control or touch the button

" USB " appears on display.

on unit repeatedly until

4. Play the music in the external player as usual and set the desired volume.

NOTE:NOTE:NOTE:

NOTE: The USB port can also be used for charging the external device.

USB

TROUBLESHOOTING GUIDE

Check the following guide before requesting serviceCheck the following guide before requesting service

6<03720 3266,%/(&$86( 3266,%/(628/7,21

No power

No sound

Sound distortion

Remote not working

Bluetooth reception failure

power cable not connected or blown fuse

Volume in minimum position

The connected device is not in playback mode

Input source incorrect

Bass level of the connected device too high

Volume level too high

The batteries are

The external device is too far

from the unit

Have not paired

consumed

~Check fuse ~Check 12V connection

Raise volume level by pressing the VOL (Volume) + button

Play the music/movie in the connected device as usual

volume level of it is in high level

Press the button repeatedly to

set the input source to the desired mode

Reduce the bass level of the connected device

Reduce the volume level by pressing

the

VOL (Volume ) - button

Replace with new batteries

Move the external BT device closer to the

unit

Pair both units

and make sure the

SPECIFICATIONS

Operation Voltage.............................................................................................................DC10V-14V

Power Supply Requirement.................................................................DC 12 Volts, Negative Ground

Overall Dimension (WMSMCZ3H-SB)............................................741.2(W)x122.0(H)x161.0(D)mm

Overall Dimension (WMSMCZ3H)..................................................312.0(W)x122.0(H)x161.0(D)mm

Max Power Consumption.............................................................................................................80W

Video In Level.................................................................................1 Vp-p/Load impedance:75 ohm

Radio Coverage ................................................................................................FM 87.5 -108.0 MHz

Bluetooth Effective Range.............................................................................................Up to 30 feet

(Measured in open area. Wall and structures may affect the effective range.)

Remote Effective Range................................................................................................Up to 16 feet

Specifications are subject to change without notice.

FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

伍于计

www.riverparkinc.com

2019 RIVERPARK Inc.

V. 051819

Junlan Electronic SBB78133 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual