Thank you for choosing a Connexx product. We hope you will find the Instructions
in this owner's manual clear and easy to follow. If you take a few minutes to
review, you will learn how to use all of
the features of your new soundbar stereo
for maximum enjoyment.
FEATURES
Features of the Connexx SB32 soundbar stereo include:
Digital FM tuner w/10 presets
Bluetooth wireless technology
Built-in subwoofer (w/optional external subwoofer as an add-on accessory)
3.5 mm aux input jack on front panel
USB input on front panel w/device charging capabilities
Digital Optical input on rear panel
2 analog stereo inputs on rear panel
Wireless remote control included
PACKING LIST
MODEL:SB32
OPT
DVD
USB
TV
AUX
BT
FM
--INSTALLATION AND OPERATION MANUAL--
PLEASE READ INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
User Manual
Audio Connection Cable
FUSE
-
+
Power Harness
Main Unit
Wall Mounting Brackets
-
+
-
+
1
AAA
AAA
Remote Control with Two Batteries
FM Antenna
Adapter (Optional)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORDUSE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD
This unit has a long cord that can easily be tripped on or pulled on, causing injury, Please make sure
it is arranged so it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped
over accidentally.
The lighting flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
FCC NOTICE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not Installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
guarantee that
in a particular
does cause
television
reception,
which can be determined by
turning the equipment off and
the user is
interference by
However, there is no
interference will not occur
installation. If this equipment
harmful interference to radio
on,
encouraged to try to correct the
one or more of the following
measures:
● Reorient or relocate the receiving
antenna. Increase the separation between
the equipment and receiver.
● Connect the equipment into an outlet
with a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced
radio/TV technician for help.
FCC WARNING:
To assure continued compliance, follow the
attached installation instructions and use only
shielded cables when connecting to other
devices. Modifications not authorized by the
manufacturer may void user`s authority to
operate this device.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE THE RECOMMENDED
ACCESSORIES ONLY.
Before using the unit, be sure to read all
operating instructions carefully. Please note
that these are general precautions and may
or
not pertain to your unit.
1 ) Read these instructions
All the safety and operating instructions should
be read before the product is operated.
2 ) Keep these instructions
The safety and operating instructions should
be retained for future reference.
3 ) Heed all warnings
All warnings on the product and in the
operating instructions should be adhered to.
4 ) Follow all instructions
All operating and use instructions should be
followed.
5 ) Do not use this apparatus near water
Do not use this product near water and
moisture, for example: near a bathtub,
washbowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool.
2
6 ) Clean only with dry cloth
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
7)Do not block any ventilation
openings. Install in accordance with the
manufacturer's instructions
Slots and openings in the cabinet and in the
back or bottom are provided for ventilation, to
ensure reliable operation of the product and
to protect it from overheating. These openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug or other similar surface.
This product should never be placed near or
over a radiator or heat source. This product
should not be placed in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
8 ) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus(including amplifiers) that produce
heat.
9 ) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug
has two blades with one wider than other.
A grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
13 ) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus
as powerhas
apparatus, the apparatus has been exposed to
rain or moisture does not operate normally, or
has been dropped.
14 ) Power source
This product should be operated only from the
type of power source indicated on the marking
label.
supply
dealer or
intended
source,
15 ) Service
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.
WARNING:WARNING:WARNING:
WARNING:
has been damaged in any way, such
supply cord or plug is damaged,
If you are not sure of the type of power
to your home, consult your appliance
local power company. For products
to operate from battery power, or other
refer to the operation instructions.
liquid
the beenobjects have fallen into or spilled
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping
or splashing
such as
and that objects
filled with liquids,
vases shall not be placed on
apparatus.
10 ) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience
they exit from
11 ) Only use attachments/accessories
specified by the manufacturer.
12 ) Unplug this apparatus during lightning
storms or when unused for long periods of
time
To protect your product from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system.
due to
receptacles, and the point where
the apparatus.
This will prevent damage to the product
lightning and power-line surges.
3
PLACING AND MOUNTING
1. Placing on the table
When placing the Sound Bar on an entertainment center, bookshelf, or any type of
enclosed space, be sure to allow
If the Sound Bar is enclosed in a tight space, without ventilation, heat
the Sound Bar could pr
oduce a potential heat hazard.
2. Mounting the Sound Bar onto a wall
We recommend having this Sound Bar professionally mounted. By using the included
wall mounting accessories, the Sound Bar can be mounted onto a wall.
space around the Sound Bar
for ventilation.
generated from
Distance between t wo brackets
24.6 inches
4
Front View
GENERAL VIEW
1
2
3
1. LED Display
2. AUX IN Jack
3. USB Jack
4. PREVIOUS/TUNE Down
Rear View
9
10
8
7
4
5
6
5. Volume Down
6. Play/Pause/ Preset/
Memory/Preset Play Button
7. NEXT/TUNE Up
8. Volume Up
12
11
9. PAIR Button
10. SOURCE Button
11. POWER Button
12. Remote Sensor
1.ANTENNA Jack
2.DVD Audio In Jack
3.TV Audio In Jack
4.Subwoofer Switch
4
2
1
3
5
7
6
5.External Subwoofer Connector
6.Optical In Jack
7.DC In Jack
5
REMOTE CONTROL
POWER
1
1
BT
2
2
AUX IN
3
3
ററ
4
TUN-
ററ
5
VOL-
FM
DVD
PAIR
OPTICAL
USB
TV
MUTE
ററ
TUN+
VOL+
7
8
9
10
11
12
13
6
1. POWER button
2. Bluetooth Mode Switch button
3. AUX IN Mode Switch button
4. ( Play/Pause )/ ( Memory/
Preset /Preset Play )button
5. TUNE - / /TUNE+ button
6. VOL ( Volume )+/- buttons
7. OPTICAL Mode Switch button
8. USB Mode Switch button
9. FM Mode Switch button
10. TV Mode Switch button
11. DVD Mode Switch button
12. MUTE button
13. PAIR button
6
BATTERY INSTALLATION--- REMOTE CONTROL
Battery Installation
1.Slide and lift the battery door (Figure 1).
2.Install 2 (two) AAA size batteries into the battery compartment as indicated
by the polarity markings (Figure 2).
3.Replace the battery door (Figure 3).
Battery Precaution
Remote Control Effective Range
When there is an obstacle between the unit and the remote control, the remote control may
not operate properly.
When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light
shines on the remote
control of the unit, the remote control may not operate properly.
7
GENERAL OPERATIONS
1. Press the Power button on the unit or remote control to power on the unit from standby mode.
2. The default mode is "FM". Press the SOURCE button repeatedly to switch to desired mode.
Follows the order below:
OPT
USB
3. During Playback:
~ Press the VOL (Volume)-/+ buttons to adjust volume level as desired.
~ Press Mute button on the Remote Control to mute the sound, press again to resume.
4. When finished listening, press the Power button to power off the unit.
5. If the unit is not used for long period of time, please disconnect power.
FM
BT
TV
DVD
AUX
8
LISTEN TO FM RADIO
1. Power ON the unit.
2. Press the SOURCE button repeatedly until FM appears on the display.
Or press FM on Remote Control.
3. Press and hold the /TUNE - or /TUNE + buttons and then release,
The unit will start to search next ( or previous )
4. When a station searched, press and hold the button to display the desired storage
location(such as Pxx.), then press
hold the button to complete station storage.
A total of 10 stations can be stored into the unit's memory.
5. Press button on remote control to play the preset stored station.
FM Antenna
The antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
ററ
ററ
ററ
available FM radio station then plays.
ററ
button to change the storage lacation, press and
BLUETOOTH PAIRING AND PLAYBACK
BT ( Bluetooth ):
BT ( Bluetooth ):
Pairing the unit to external BT Device as follows:
Pairing the unit to external BT Device as follows:Pairing the unit to external BT Device as follows:
1. Power ON the unit.
2. Press the SOURCE button repeatedly until "BT" appears on display.
Or press BT on Remote Control.
3. Turn on the external BT Device and enter BT searching mode. Start
instructions on the external BT Player.
( For details pairing procedures, please refer
~
Notes:
When the external BT Device searched the unit, will appear on the
display of the external BT Device.
~
Pairing code "0000" may need to be entered.
4. Press "PAIR" button on remote control or front panel to disconnect current pairing and try to
pair with other device.
Normal operation after paired:
Normal operation after paired:
--Press the VOL (Volume)-/+ buttons to adjust volume level as desired.
--Press the /TUNE - or /TUNE + buttons to skip to previous or next track.
--Press the button to play or pause.
to the user's manual of your BT Device. )
"SB32"
pairing as the screen
9
ADDING OPTIONAL EXTERNAL SUBWOOFER
-
+
NOTE: Before connecting, disconnect power.
There is a SPEAKER SELECTOR on the back of the unit to turn on or turn off the internal subwoofer
output or external subwoofer output.
IN(Internal subwoofer)-- When the switch is moved to "IN" position, there will be no audio output
from the external subwoofer.
EX(External subwoofer)- When the switch is moved to "EX"
from the internal subwoofer.
position, there will be no audio output
1. Connect one end of subwoofer connection cable ( not supplied ) to the "+" Jack on the rear
of the unit as the figure above.
2. Connect the other end to the "-" Jack on the rear of the unit as the figure above.
3. Slide the selector to "EX" position as figure above.
4. Power ON the unit.
5. Play the music as usual and set the desired volume.
10
CONNECT USING OPTICAL
Optical Cable(Not Supplied)
DVD or TV
NOTE: Before connecting, disconnect power.
1. Connect one end of optical connection cable ( not supplied ) to the optical jack on the rear
of the unit as pictured above.
2. Connect the other end to the DVD or TV back panel.
3. Power ON the unit.
4. Press the SOURCE button repeatedly until the "OPT" appears on display.
Or press OPTICAL on Remote Control.
5. Play the music as usual and set the desired volume.
NOTE:
If there is no audio output (only picture) when your TV or DVD player is connected
to the soundbar, please check DVD audio setting, and set the digital output to PCM format.
11
CONNECT TO TV/DVD
White
White
Red
Red
White
Red
DVD
NOTE: Before connecting, disconnect power.
NOTE: Before connecting, disconnect power.
1. Connect as the figure above.
2. Power ON the unit.
3. Press the SOURCE button repeatedly until "TV" appears on display.
TV audio is selected and will play through the unit.
Or press TV on Remote Control.
4. Press the SOURCE button repeatedly until "DVD" appears on display.
DVD audio is selected and will play through the unit.
Or press DVD on Remote Control.
TV
5. Play the audio as usual and set the desired volume.
12
AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES
1. Connect one end of audio connection cable (not supplied) to the AUX IN jack on the front of the
unit as pictured above.
2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as
iPod, iPhone, iPad, MP3 player, Discman... etc. )
3. Power ON the unit.
4. Press the SOURCE button repeatedly until "AUX" appears on display.
Or press AUX IN on Remote Control.
5. Play the music in the external player as usual and set the desired volume.
USB : LISTEN TO EXTERNAL AUDIO DEVICES
USB
1. Insert the USB as in the figure above.
2. Power ON the unit.
3. Insert the USB, then press the SOURCE button repeatedly until "USB" appears on screen.
Or press USB on Remote Control.
4. Play the music in the external player as usual and set the desired volume.
~ Press button on the Remote Control to play or pause.
~ Press or button on the Remote Control to skip to next or previous track.
NOTE:
NOTE:NOTE:NOTE:
The USB port can also be used for charging.
13
TROUBLESHOOTING GUIDE
Check the following guide before requesting serviceCheck the following guide before requesting service
6<037203266,%/(&$86(3266,%/(628/7,21
No power
No sound
Sound distortion
Remote not
working
Bluetooth
reception failure
Power cable not connected
or blown fuse
Volume in minimum position
The connected device is not
in playback mode
Input source incorrect
Bass level of the connected
device too high
Volume level too high
The batteries are
The external device is too far
from the unit
Have not paired
consumed
~Check fuse
~Check 12V connection
Raise volume level by pressing the VOL
(Volume) + button
Play the music/movie in the connected
device as usual