Junlan Electronic SBB06682 User Manual

AR2000

Bk-BGL

User Manual

SLIM BLUETOOTH SOUNDBAR
AR2000BK-BGL

Soundbar

Power adapter

2 screws

FRONT VIEW

RCA cable

2 plastic wall plugs

SLIM BLUETOOTH SOUNDBAR
AR2000BK-BGL

User Manual

Remote control

3.5mm auxiliary cord

SIDE VIEW

1. Power ON/OFF button

2. / ( Skip Forward/Backward ) button

3. EQ ( Equalizer ) button

4. BASS +/- buttons

5. ( Mute ) button

6. ( Play/Pause ) button

7. SOURCE button

8. VOL ( Volume ) +/- buttons

9. TREBLE +/- buttons

Battery Installation for Remote Control

- First Time Use
Remove and discard the insulation tab

as figure on the right.

- If the battery is consume, replace it as below:

1. Push and slide out the battery holder as figure 1 below.

2. Replace the battery with a new CR2025 button cell as the

polarity markings on the rear of the Remote Control.

3. Close the battery holder.

Fig.1 Fig.2

To Turn the Unit ON

Connect the supplied power adapter to the DC IN jack. Then press
the SOURCE/ button on the unit or the button on the remote

control.

To Turn the Unit OFF

Press and hold the SOURCE/ button on the unit or press the

button on the remote control.

Fig.3

AUX IN Playback:

Press the button on the remote control to turn the sound OFF.
Press again to resume sound.

Press the Volume+/- button on the unit or the VOL+/- button on the
remote control to adjust the volume level.

Press the Bass+/- button on the remote control to adjust the
bass level.

Press the Treble+/- button on the remote control to adjust the
treble level.

Press the EQ button on the remote control to switch the
equilibrium between POP/JAZZ/CLASSIC/ROCK/NORMAL.

Examples of RCA AUX IN sources are television sets, DVD players.
and VCR players.

RCA AUX IN Connection:

1. Connect RCA cord (included) between your audio player and
the AUX-IN 1 Jacks on the top of the Soundbar.

2. Press the SOURCE/ button on the unit or the button on the
remote control to turn on the Soundbar.

3. Press the SOURCE/ button on the unit or the SOURCE button
on the remote control repeatedly until the indicator turns Green.

4. Set your personal external player to play.

RCA AUX IN Playback:

Press the button on the remote control to turn the sound OFF.
Press again to resume sound.

Press the Volume+/- button on the unit or the VOL+/- button on the

remote control to adjust the volume level.

Press the Bass+/- button on the remote control to adjust the
bass level.

Press the Treble+/- button on the remote control to adjust the
treble level.

Press the EQ button on the remote control to switch the
equilibrium between POP/JAZZ/CLASSIC/ROCK/NORMAL.

1. Press the SOURCE/ button on the unit or the button on the
remote control to turn on the Soundbar.

2. Press the SOURCE/ button on the unit or the SOURCE button
on the remote control repeatedly until the indicator turns Blue.

3. Keep the unit and the Bluetooth enabled device within 3 feet of
each other during the pairing process.

4.Set your mobile phone or other Bluetooth enabled device to
search for Bluetooth devices.

On a Blackberry

Go to SETTINGS>OPTIONS>BLUETOOTH
Enable BLUETOOTH

On an Android Phone

Go to SETTINGS>BLUETOOTH>MENU>Search
for devices(Make sure Bluetooth is turned ON)

On other Cell Phone/Devices

Review the instruction manual that came with your
phone/device.

BLUETOOTH Playback:

Press the button to pause playing track. Press again to

resume playing.

Press the or button on the remote control to skip to next

or previous track.

Press the button on the remote control to turn the sound OFF.
Press again to resume sound.

Press the Volume+/- button on the unit or the VOL+/- button on

the remote control to adjust the volume level.

Press the Bass+/- button on the remote control to adjust the
bass level.

Press the Treble+/- button on the remote control to adjust the
treble level.

Press the EQ button on the remote control to switch the
equilibrium between POP/JAZZ/CLASSIC/ROCK/NORMAL.

Mounting on wooden wall

22.4 inches

Screw

1. Mark the position of the mounting screws on the wall
using a pencil.

2. Drill the supplied screws directly into the

made on the wall

hook the sound bar.

3. Put the sound bar onto the mounting screws.
Make sure they are firm and stable.

Mounting on brick wall

Screw

1. Mark the position of the mounting screws on the wall

using a pencil.

2. Drill 2 holes by a powerful electric drill ( Not Supplied ).

3. Insert the supplied fixing plug and hammer into the holes.

4. Secure the supplied screws into the fixing plugs and

leave approx. 0.3 inch

5. Put the sound bar onto the mounting screws.

Make sure they are firm and stable.

Screw

marks that you have

and leave approx. 0.3 inch length to

Fixing Plug

22.4 inches

Fixing Plug

Screw

length to hook the sound bar.

The volume may be too low. Try increasing the volume by
pressing Volume+ button on the speaker or VOL+ button
on the remote control.

The connected device might not be in playback mode.
Play music the connected Bluetooth device.

The sound output of the connected device is weak.
Increase the volume of the connected Bluetooth device.

The volume may be too high. Try reducing the volume by
pressing Volume- button on the speaker or VOL- button
on the remote control.

The sound output of the connected device may be too high.
Try reducing the volume of the connected Bluetooth device.

Make sure no other devices are connected to the Soundbar
and try the connection again. If a device was connected to
the speaker, unpair it before connecting your new device.Do
this using your Bluetooth device's Bluetooth menu.

1.Speaker

2.Remote Sensor

3.Indicator

4.Volume +/- Button

5.AUX-IN 2 Jack

6.SOURCE/ (Standby) Button

TOP VIEW

7.RCA Jacks

8.DC IN Jack

Examples of AUX IN sources are personal audio players and computers.

AUX IN Connection

1. Connect a 3.5 mm auxiliary cord (included) between your audio
player and the AUX-IN 2 Jack on the right side of the Soundbar.

2. Press the SOURCE/ button on the unit or the button on the
remote control to turn on the Soundbar.

3. Press the SOURCE/ button on the unit or the SOURCE button on
the remote control repeatedly until the indicator turns Orange.

4. Set your personal audio player to play.

within 3 feet

On an iPhone

Go to SETTINGS>GENERAL>BLUETOOTH
(Make sure Bluetooth is turned ON)