Junlan Electronic NAS3070 User Manual
Portable Stereo System with Bluetooth
NAS-3070
®
Instruction Manual
Please read carefully before use and keep for future reference.
Thank You
In the Box
We know you have many choices when it comes to
technology; thank you for choosing us here at Naxa
Electronics. Established in 2001 in Los Angeles, California, we are dedicated to delivering products that entertain and delight.
We trust that you will be happy with your purchase.
Please read this manual carefully and save it for refer-
ence. You may also nd the latest FAQ, documentation,
and other product material at our website. Come visit
us on the web at www.naxa.com and see all that we
have to offer!
Please take a moment to make sure that you have everything in the list below. Although we make every effort to ensure that each Naxa device is securely packed
and sealed, we know a lot can happen in between us
and you. If anything is missing, check back with your
local retailer to get immediate assistance. If they cannot help you, please contact our Naxa Support team at
www.naxa.com/naxa_support.
• NAS-3070
• USB charging cable
Page 2 Naxa Electronics
At a Glance
1 2
1 Pause or resume playback.
2 PAIR Place the speaker in pairing mode to
connect to a Bluetooth® enabled device.
3 – Volume down. Press to decrease the
volume level.
4 + Volume up. Press to increase the volume
level.
3 4
www.naxa.com Page 3
5 POWER Set the switch to the left “ON” position
to turn the speaker on.
Set the switch to the right “OFF” position
to turn the speaker off.
6 USB charge
port
7 AUX
connector
Connect to a USB power source with the
included cable.
AUX mode. 3.5mm stereo connection for
devices with 3.5mm line-out or headphone output.
Connecting Power
Your speaker has an integrated rechargeable battery.
Upon initial use, the battery should be charged fully to
ensure optimal performance and battery life.
Use the included USB cable to connect the speaker to a
USB power source to charge the battery.
• Connect the small end of the cable to the USB
charge port [6] of the unit.
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
The battery used in this device may pres-
ent a re or chemical burn if mistreated.
⚠⚠
Do not disassemble, incinerate, or heat the
battery. Do not leave the battery in a place
subject to direct sunlight, or in a car with its
windows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of re
or electric shock.
The power indicator will light a steady red when the
battery is charging. When charging is complete, the
power indicator will darken.
The power indicator will ash red when the battery
level is low.
It takes approximately 2 hours to charge
⚠L
the unit fully when connected to a standard USB port.
The battery will charge even if the speaker is
switched off.
Page 4 Naxa Electronics
Loading...