Junlan Electronic CHT940X User Manual

Sound Bar with FM/Bluetooth

Music Player

Model:CHT940x

FCC Warnings

WARNING:Changes or modifications to this unit

not expressly

for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.



Increase the separation between the



equipment and receiver. Connect the equipment into an outlet on a



circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV



technician for help.

FCC NOTICE:

To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user’s authority to operate this device.

approved by the party responsible

1. Insert the plug from the supplied AC/DC adaptor to the DC In Jack on the top of unit.

2. Insert the small plug from the supplied AC Power

Cord to the AC In Jack on the AC/DC Adaptor.

3. Insert the AC Plug from the supplied to the wall

outlet Having AC 100-240V~; 50/60Hz.

NOTE:

If Long period of time will not use the unit, unplug the AC Cord from the wall outlet.

To the DC IN jack on the top of the unit.

To the wall outlet

To the AC In Jack

1. Placing on the table

When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard.

2. Mounting the Speaker Bar onto a wall

We recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall.

Distance Between Two Brackets

25.9 inches

2.1 Mounting on the wooden wall

You may use

25.9 inches

2 pieces screws

(Included)

1. Mark the position of the mounting screws on the wall using a pencil.

2. Drill the supplied screws directly into the marks that you have made on the wall and leave approx. 0.3 inch length to hook the sound bar.

3. Put the sound bar onto the mounting screws. Make sure they are firm and stable.

2.2 Mounting on the wall

2.2 Mounting on the wooden wall:

You may use

2 pieces screws

(Included)

1. Mark the position of the mounting screws on the wall using a pencil.

2. Drill 2 x 7/32 inch diameter holes by a powerful electric drill ( Not Supplied ).

3. Insert the supplied plastic inserts into the holes by hammer .

4. Secure the supplied screws into the plastic insert and leave approx. 0.3 inch

length to hook the sound bar.

5. Put the sound bar onto the mounting screws. Make sure they are firm and stable.

(1)

2 pieces plastic inserts

(Included)

( Not Supplied )

25.9 inches

(2)

+ 9 hidden pages