Junlan Electronic CHT914N User Manual

TOWER STEREO SYSTEM

TOWER STEREO SYSTEM

Owner's Manual

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.

Model: CHT914n

IMPORTANT SAFETY INSTRUCTIONS

POWER SOURCE

Insert the AC plug into a conveniently located AC outlet having AC 120V~60Hz.

NOTE: The AC plug supplied with the unit is polarized to help minimize the

possibility of electric shock. If the AC plug dose not fit into a
AC outlet, do not file or cut the wide blade. It is the

have an electrician replacing the

obsolete outlet.

user's responsibility to

non polarized

INSTALLATION

MAIN UNIT-- RIGHT CHANNEL SPEAKER

1
2

3

3

4

Figure 1

1. Plastic Holder

2. Remote Sensor

3. Speakers

4. Speaker Net

5. Wooden Base

6. Washers

7. Screws

7

Figure 2

5

6

LEFT CHANNEL SPEAKER

1

1

5

1. Speakers

2. Speaker Net

3. Wooden Base

4. Screws

5. Washers

i

External Device

i

Plastic Holder

2

Figure 3

3

4

Figure 4

Figure 5

Note:

1. Assemble the wooden base to the main body with the supplied screws and washers as Fig. 2 & 4 above.

2.The speaker net can be taken out and reassembled as Fig.1 & 3 above.

3.Install the

Plastic Holder on the top of unit to hold the external device as Fig. 5 above.

LOCATION OF CONTROLS

MAIN UNIT

1. USB Port (For recharge only)

2.

(Power) button

3. STANDBY indicator

4. SOURCE button

5.

/ TUNE + button

6. VOL+ (Volume Up) button

7. /

TUNE - button

8.

VOL- (Volume Down) button

9. AUX IN 2 jack

10.

(Play/Pause) button

11. SOURCE indicator
Speaker Connector

12.

(For Left Channel Speaker)

13.

AUX IN 1 jacks

14.

FM Antenna

11

10
9

45678

14

12
13

1

2
3