Junlan Electronic CAW37052 User Manual

BWS-6/0454

Wi-Fi Buddy Speaker

INSTRUCTION MANUAL

PLEASE READ ALL INSTRUCTIONS CAREFULLY

AND RETAIN FOR FUTURE USE

Getting started

 Remove the product from the box.

 Remove all packaging from the product.

 Please retain all packaging until you have checked and counted all the parts and the contents

 WiFi Wireless Speaker

 USB Charging Cable

 3.5mm Auxiliary Cable

 Instruction Manual

 Connects to Amazon’s Alexa



 Controlled by your voice for hands-free convenience and supports far-field voice recognition for

 Connected to the cloud for infinite uses and always getting smarter

 Play music from amazon music, Spotify, iHeartRadio, TIDAL and more

 Built-in Wi-Fi & Bluetooth for wireless music

 Rechargeable battery for cordless use anywhere around your home

 Built-in aux jack connects to any device for audio playback

 Read all instructions before using this product.

 Do not leave this product unattended while connected to the power supply.

 Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.

 Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent

 Do not use the unit if it has been dropped or damaged in any way.

 Repairs to electrical equipment should only be performed by a qualified electrician. Improper

 Do not use the unit with wet hands.

 Do not put objects into any of the openings.

 Keep the unit free from dust, lint etc.

 Do not use this unit for anything other than its intended use.

 Keep the unit out of reach of children.

 This product is not a toy.

 Do not play music at excessive levels especially near children, as damage to hearing may occur.

against the parts list.

Packaging Contents

Features

voice service to play music, provide information, news, sports

scores, weather, shopping and other services

easy use nearby, or across the room

IMPORTANT SAFETY INFORMATION

against electric shock, explosion and/or injury to yourself and damage to the unit.

repairs may place the user at serious risk.

Description of Parts

TOP VIEW

REAR VIEW

DC 5V

AUX IN

1 7

LED Light Ring

2 8

Power On/Off, MODE Button

3 9

VOL+ Button

4 10

VOL- Button

5 11

Microphone Control/WPS Button

Alexa Control Button

Mode Indicator Built-in Microphone

Charge Indicator DC IN Jack AUX IN Jack

INSTRUCTIONS FOR USE

1. The Speaker comes with a built in rechargeable battery. Before using it for the first time

2. Lift up the rubber lid for AUX IN and DC IN Jacks, connect the USB charging cable to a

1. Turn on the speaker.

2. Wait the mode indicator light blinks green only, then

press

the

MODE Button

3. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer.

4. It will search for available Bluetooth devices.

5. The speaker would appear as “SL BUDDY”, in the list of searched devices. Select it

6. If required, enter the password ‘0000’ to confirm pairing.

7. Once paired successfully, you would hear an indication tone and the Blue LED will

8. If you fail to pair it within a few seconds or you want to pair it with a new device,

1. Short press the MODE button to switch different functions of the speaker. The

2. When the speaker is not in use, turn OFF the device to save the battery power.

Charging instructions

we recommend you charge the battery fully. Only use the supplied USB Cord to charge the device.

computer USB port or USB source supply and the Micro USB plug to the charging port of the device. The Red LED light turns on while the device is charging. It takes around 4 hours for the unit to fully charge. When the battery is fully charged, the LED would turn off.

Turning on/off the Speaker

Press and hold the MODE button to turn on the unit, press and hold again to turn it off.

Pairing your device with the Speaker –

Your Speaker can stream wireless audio from any Bluetooth enabled device within the range of 27-33 Feet. Simply follow the below steps.

repeatedly until the mode indicator light turns Blue and blink. The speaker is now in pairing mode.

from the available list of devices.

stay on.

please repeat above steps.

Play your favorite song on the Bluetooth source device and music would now stream through the speaker.

Listening to Wireless Music

Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the speaker to stream wireless music. Once it is paired, play music from your device.

Press the VOL+ or VOL- button on the unit to adjust volume.

NOTE:

After first time pairing, the unit will be automatically paired before when the bluetooth of the

Tips!!

functions are – Bluetooth/AUX/Wi-Fi.

device and speaker are activated and

with the device connected

in range.

Listening to Music using AUX-In

1. Turn on the speaker.

2. Plug the 3.5 mm Aux-in cable (included) into the AUX IN port of the speaker for AUX

3. Press the

MODE button to AUX function until the mode indicator light turns

4. Select your favorite song at the source device.

function. And, the other end of the cable to the audio device (such as computer / tablet / MP3 Player etc.).

Blue/Green.

(Note: While using AUX IN function, functions such as play/pause can be controlled only

through your source device).

+ 11 hidden pages