Junlan Electronic CAW07015 User Manual
SAMSUNG POWERED WIFI PORTABLE SPEAKER
MODEL:CAW-07015
PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE
OPERATION AND KEEP IT FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
3
TOP VIEW
FRONT VIEW
SIDE VIEW
LOCATION OF CONTROLS
M
1 2 3 4
5 6 7
DC IN
8 9
1. Play/Pause (WiFi Pairing) Button
2. Previous (Volume Down) Button
3. Next (Volume Up) Button
4. Mode (Power On/Off) Button
5. WiFi Indicator
10 11
6. Bluetooth Indicator
7. AUX IN Indicator
8. Battery Indicator
9. Battery Indicator Button
10. AUX IN Jack
11. DC IN Jack
Specification
Power supply......................................................................................5V 2A
Speakers..................................................................................................................2 X 3 W
Running Time..................................................................around 6 hours(with 50% volume)
Recharging Time...........................................................................................around 4 hours
Accessories:
1 X AC/USB Adapter
1 X 3.5mm Stereo AUX IN Cable
1 X Instruction Manual
1 X Velvet Bag
4
Recharging
During playing, press the battery indicator button to display the battery level.
Battery Indicator Button
When the battery is in low level, the battery indicator will flash blue, the unit needed to be
recharged.
Battery Indicator
Uncover the rubber lid of AUX IN and DC IN jack,using the supplied Adapter to recharge
through the DC IN jack.
When the battery is recharging, the battery indicator will light up red. The red indicator will
turn blue after the unit is fully charged.
DC IN
DC IN Jack
Battery Indicator
5
BLUETOOTH OPERATION
Pairing the speaker with Bluetooth devices (phone or music device)
1. Press and hold the button to turn on the unit.
2. Press the button repeatedly to turn to Bluetooth mode, the Bluetooth indicator on
front of the unit will light up and blink, now it is entering pairing mode.
3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please
refer to the manufacturer’s instructions of your device.
4. Once you have activated Bluetooth on your device, select the speaker “CAW-07015” from
the list of available Bluetooth devices.
5. Once paired successfully, Bluetooth indicator will stop blinking.
6. If pairing is unsuccessful, turn off the speaker first and then re-pair following above steps.
7. Once you have paired the speaker with a device, the speaker will remember this device
and will pair automatically when the device’s Bluetooth is activated and in range.
8. If you want to pair it with a new device, press and hold the button to disconnect the
current pairing.
During playing:
A:Press the or button to skip to previous or next track.
B:Press the button to pause, press again to resume playing.
C:Press and hold the or button to decrease or increase the volume.
M
M
NOTE:
During playing, please do not insert the AUX IN cable into the AUX IN Jack, or it will switch
to AUX IN mode.
6
AUX IN OPERATION
1. Connected the external audio device to the unit by an
audio connection cable with 3.5mm
stereo mini jacks as:
~ Insert one end to the Phone; Line Out or AUX Out Jack
on the external audio device.
~ Insert the other end to the AUX IN jack on the side of unit.
MP3
Connect to the Phones; AUX Out;
Line Out Jack of the external devices
(Such like MP3 Player; cell phones;
iPod/iPad ... etc)
(Audio Connection Cable supplied)
2. Press and hold the button to turn on the unit.
3. Press the button repeatedly to turn to AUX IN mode, the AUX IN indicator on
M
Mobile Phone
M
To AUX IN jack on
the side of the unit
DC IN
front of the unit will light up.
4. Play music as usual on your external device.
7
Setup
PREPARATION
Before connecting the mobile phone with the unit ,
please search "MUZO" player from network and download it,
or download the MUZO APP from APP store.
Install the APP and set the language of mobile phone to English.
The APP icon will appear like the Fig.1 after successful installation.
NOTE:Please make sure that there is no AUX IN cable plugged in AUX IN jack.
CONNECT THE MOBILE PHONE WITH THE UNIT
MUZO PLAYER
Fig. 1
Press and hold the button to turn on the unit, the WiFi indicator will light up and blink.
Turn on the WiFi on the mobile phone, then search the router (WiFi Source),
for example, the router name is "JUNLAN", select "JUNLAN" from WiFi name list,
input the password (eg:12345678)to make successful connection.
Click MUZO icon to activate the MUZO player APP, it will start to search muzo system
automatically.
Follow the instruction to input the WiFi password (12345678) to log on same WiFi network.
Follow the instruction below to establish connection.
1. Press and hold the button on the unit and try to connect with mobile phone.
2.There will be voice tone from the unit instructing like:
" Searching for Wifi connection "
" Waiting for Wifi connection "
" Wifi connected "
M
successfully connected
device connected to JUNLAN network
current signal strength 59%
8
Loading...