Junlan Electronic CAB6G680 User Manual

Charaer

Wireless Speaker

Side Front

Hold-power on/off
Press-play/pause,

hands-free selfie

Bluetooth
indicator

Charge indicator

Included

Charaer Wireless Speaker
18’ Micro USB Charging Cable

Pairing

Power ON using ON/OFF switch.
Rapid flashing white light, followed by a chime
Use Bluetooth settings on your phone to pair with MORE THAN MAGIC 04
Slow flashing white light - pairing successful

Selfie funion

Aivate the camera of your phone
Press the ON/OFF switch to make a selfie, the music playing will be paused

Pair with another Charaer Wireless Speaker

Power on both speakers, double press the ON/OFF switch on one of the speakers
Pair the main speaker with the external Bluetooth player and art playing music
When one of the speakers is powered off, the other one will be powered off as well

Indicators

White Rapid Flash - Powered on
Red/White Alternating Until Paired - Bluetooth pairing

Bottom

Charge port

Slow Flashing White - Paired
Red - Battery low
Chirping Tones - Powering on
Single Chime - Ready to pair
Echoing Chime - Paired
Rapid Chirping Tone - Low battery
Quick Low Tone - Max. Volume/Min. Volume
Double Chime - AUX cable conneed

Charging

Plug micro end of charging cable into charge port of speaker
Plug USB end of charging cable into a DC 5V USB power supply

Troubleshooting and tips

If the speaker is not working properly, turn it on/off to reset
If the speaker won’t turn on, recharge the battery and try again
If the speaker won’t charge, make sure the supply works, is 5V >1A, and not damaged
If the speaker makes no sound adju the volume
If the speaker makes no sound make sure it is not paused. Press the play button if it is
paused
If the speaker makes no sound or dœs not show as an available device, make sure it is not
paired to another device, if so, unpair the device and re-pair the desired device
This device dœs not have a pairing code. If prompted for one make sure you are conneing
to the corre device. If you are, “forget“ the device and re-pair. If you are ill prompted
enter 0000

NOTE:

The unit will power off aer 20 minutes of no use.

Need some help?

Can’t get it to pair? Have a queion or comment?

call us at: 877-698-4883 or: 877-MyTgtTech online at: TargetTechSupport.com

Safety

Do not use near any water source
Do not modify or repair this device
Do not use in high temperatures or extreme weather
Do not use chemical detergents to clean your device, use a so dry cloth

FCC ID: OKUCAB6G680 Model: TT1141 Input: 5V Max 1A Made in China
This device complies with part 15 of the FCC Rules. Operation is subje to the following two conditions: (1)This device may not
cause harmful interference, and (2)This device mu accept any interference received, including interference that may cause
undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been teed and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable proteion again harmful interference in a residential
inallation. This equipment generates, uses and can radiate radio frequency energy and, if not inalled and used in
accordance with the inruions, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a particular inallation. If this equipment dœs
makeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to corre the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Conne the
equipment to an outlet on a circuit different from that to which the receiver is conneed. ● Consult the dealer or an
experienced radio/TV technician for help.
Target Corp.Mpls.MN,55403 Phone:[phone]