Junlan Electronic CAB48601 User Manual

MODEL: PBT555

INSTRUCTION MANUAL

PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USING A ND KEEP

IT FOR FUTURE REFERENCE

The lighting flash with arrowhead symbol, within an equilateral triangle, is
intended to alert user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure, that may be of sufficient magnitude to constitute a risk of
electric.

The exclamation point within an equilateral triangle is intended to alert user to
the presence of important operating and maintenance (servicing) instruction in the
literature accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DON’T REMOVE COVER ( OR BACK ). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD
This unit has a long cord that can be easily tripped on or pulled on, causing injury, Please
make sure it is arranged so it will not drape over a tabletop, etc. Where it can be pulled on
by children or tripped over accidentally.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception. Which can be
determined by encouraged to try to correct the interference by one or more of the following
measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

4. Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, follow the attached installation instructions and use only shield
cables when connecting to other devices. Modifications not authorized by the manufacturer may
void user’s authority to operate this device.

Before using the unit, be sure to read all operating instruction carefully, please note that
these are general precautions and may not pertain to your unit. For example, this unit may
not have the capability to be connected to an outdoor antenna.

1.Read these instructions
All safety and operating instructions should be read before the product is operated.

2.Keep these instructions
The safety and operating instructions should be retained for future reference.

3.Heed all warnings
All warnings on the product and in the operating instruction manual should be adhered to.

4.Follow these instructions
All operating and use instructions should be followed.

5.Do not use this apparatus near water
Do not use the product near water and moisture, for example:near a bathtub, washbowl, kitchen
sink or laundry tub; in a wet basement; or near a swimming pool.

6.Clean only with dry cloth
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure
reliable operation of the product and to protect it from overheating. These openings must not be
blocked or covered.The openings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should never be placed near or over a radiator or heat
source. This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.