Junlan Electronic CAB2437 User Manual

Pair /Power
Indicator
Status Indicator
Power O No light
Searching Slow ashing light Pairing Quickly ashing light Connected Solid light
Power/Pair Button
PAIR
Dock
Connector
1. Set your iPod audio device to iPod mode.
Refer to the user’s manual for your specic device for instructions.
2. Connect the IAB53 using the Dock Connector.
Power
1. Once connected for the rst time, the unit should turn on automatically. If the unit does not power on, press and hold the Pair button for 3+ seconds to power the unit on.
The Pair /Power Indicator will ash slowly.
A beep will sound when the unit has been recognized.
2. Repeat step one to power the unit o.
PairingConnecting
1. Once the unit has been recognized, the Pair /Power Indicator will ash slowly when searching, then quickly to enter pairing mode.
If the unit does not enter pair mode automatically, press the power/Pair button once.
2. Using the native controls on your Bluetooth device, select the “IAB53” to pair.
If your device requests a password, enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specic device for instructions on pairing and connecting Bluetooth devices.
3. Press and Hold the Power/Pair button to turn o and disconnect the IAB53.
The Pair /Power Indicator will turn o.
IAB53-771-01-IB.indd 1-4 11/7/2012 10:42:45 AM
Company Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
International Support
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at www.iLiveElectronics.com.
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respu­estas a preguntas frecuentes, visite la sección de apoyo en
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur
www.iLiveElectronics.com.
Copyright © 2013 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice
IAB53-771-01-IB.indd 5-8 11/7/2012 10:42:47 AM
www.iLiveElectronics.com.
Contact Information
Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Website: www.iLiveElectronics.com
Warranty
For Warranty Information and the most up-to­date version of this User’s Guide, go to
www.iLiveElectronics.com.
Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
nOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
USER’S GUIDE
V:771-01
IAB53
Wireless Bluetooth Receiver and Adapter
For the most up-to-date version of this User’s Guide, go to
www.iLiveElectronics.com
Loading...