Junlan Electronic CAB09664 User Manual
Bluetooth
2016.04.2
9 14:10:06
+08'00'
Wireless Alarm Clock Radio
with Built-in 2.1A USB Charging Port
BCRU-12/0137
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE USE
Getting started
Remove the product from the box.
Remove all packaging from the product.
Please retain all packaging until you have checked and counted all the parts and
Bluetooth Alarm Clock Radio
Power Adapter
3.5mm Auxiliary Cable
Instruction Manual
Digital Alarm Clock with Radio & High Speed USB Charger
Bluetooth wireless speaker connects to your phone, tablet or computer perfect for
Built-in microphone for hands-free calls with your Bluetooth enables device
3.5mm stereo mini-plug input
Full track control, volume control, tuner functions and snooze button
Backlit display with dimmer
Read all instructions before using this product.
Do not leave this product unattended while connected to the power supply.
Keep the unit away from heat sources, direct sunlight, humidity, water and any
Do not operate the unit if it has been exposed to water, moisture or any other
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician.
Do not use the unit with wet hands.
Do not put objects into any of the openings.
Keep the unit free from dust, lint etc.
Do not use this unit for anything other than its intended use.
Keep the unit out of reach of children.
This product is not a toy.
Do not play music at excessive levels especially near children, as damage to
the contents against the parts list.
Packaging Contents
Features
waking up to your favorite tunes
IMPORTANT SAFETY INFORMATION
other liquids.
liquids to prevent against electric shock, explosion and/or injury to yourself and
damage to the unit.
Improper repairs may place the user at serious risk.
hearing may occur.
2
Description of Parts
1 FM Antenna 9 CH MODE Button
2 AUX-IN Port 10 LED Display
3 DC-IN Power Port 11 SNOOZE/SLEEP/DIMMER
Button
4 2.1A USB Charging Port 12 Skip Backward Button
5 MICROPHONE 13 Skip Forward Button
6 MEMORY/SET Button 14 VOLUME +/AL1 Button
7 POWER/FUNCTION Button 15 VOLUME -/AL2 Button
8 MFB Button
(Phone/Mono/Stereo/Play/Pause)
16 Back-Up Battery Compartment
3
LED Display
Do not mix old and new batteries.
Do not mix different battery types; alkaline, standard (Carbon – Zinc), or
Do not expose battery to excessive physical shock, vibration, or liquids.
Do not disassemble, attempt to repair or deform the battery.
Do not dispose batteries in fire.
Do not peel or damage the battery label. Risk of explosion and damage to product
Remove batteries from the unit, if it is not intended to be used for an extended
Batteries shall not be exposed to excessive heat such as sunshine or fire.
Dispose of the used batteries according to the requirements of the local regional
AL1 indicator is ON when Alarm 1 is on.
AL2 indicator is ON when Alarm 2 is on.
PM indicator is ON when time is in PM time.
FM indicator is ON when using radio function.
INSTRUCTIONS FOR USE
This unit requires AC/DC Power Adaptor (included). 2pcs AAA batteries (Not
included) are required for the clock, radio, preset and alarm memory back-up.
Installing Back-Up Batteries
Unscrew and remove the Back-Up Battery Cover, install 2pcs AAA batteries (Not
included) into the compartment with correct polarities.
NOTE:
rechargeable (Nickel – Cadmium) batteries.
if batteries are replaced incorrectly. Follow safety information on battery.
period of time.
needs.
Connecting the AC Power Source
Insert the small plug from the supplied AC/DC Power Adaptor to DC-IN Power Port at
the rear of the unit. Plug the AC/DC Power adaptor to a wall outlet (with AC
100-240V~50/60Hz).
Clock Setting
Connect the power adaptor. The unit will be in standby mode. You can now set the
clock time and adjust the LED brightness as follows:
4
Loading...