Juniper Systems Allegro 2 Quick Start

Bumper Stylus Tether Attachment Point

Touchscreen

Numeric Keys

Indi cator LEDs

QWERT Y Keys

Battery Pack SIM & SD Card Slots

Handstrap Attach ment Point

USB Client

Microphone/Speaker Jack

Speaker

Microphone

9-pi n Ser ial Po rt

Docking Pi n Contacts

Camera Lens (option)

Camera Flash/Flashlight (option)

Expansion Door

Handstrap Attach ment Points

Battery Door Screws

Handstrap & Stylus

USB Host

To view the Orange Power User Key menu press the orange + F1 keys.

12-24 VDC Connector

Power But ton

Start Here

1 Loosen the 4 captive screws on the battery door with a #1 Phillips screwdriver. Remove the door. CAUTION: The handheld is not sealed when the door is removed.

2 Place the battery pack into the compartment. Be sure to line up the and . 3 Replace the battery door and tighten the screws. 4 Slide the correct plug for your location onto the AC power charger. Plug the charger into a wall socket and

the DC connector on the handheld. 5 The handheld powers on and several screens appear. When the Update Time screen is shown make adjustments if needed and select OK.

6 Charge the battery pack at room temperature for 5 hours.

The operating system, manual and quick start guide is available in English, Spanish, French, German, and Brazilian Portuguese. Go to our website at www.junipersys.com/Allegro-2/support.