EX2200andEX2200-CSwitchesHardware
Guide
Published
2020-12-15
ii
Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, California 94089 USA
408-745-2000 www.juniper.net
JuniperNetworks,theJuniperNetworkslogo,Juniper,andJunosareregisteredtrademarksofJuniperNetworks,Inc. in theUnitedStatesandothercountries. Allothertrademarks,servicemarks,registeredmarks,orregisteredservicemarks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
EX2200andEX2200-CSwitchesHardwareGuide
Copyright © 2020 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR2000NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.
ENDUSERLICENSEAGREEMENT
TheJuniperNetworksproductthatisthesubjectofthistechnicaldocumentationconsistsof(orisintendedforusewith) JuniperNetworkssoftware.UseofsuchsoftwareissubjecttothetermsandconditionsoftheEndUserLicenseAgreement (“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you agree to the terms and conditions of that EULA.
iii
AbouttheDocumentation | x
Documentation and Release Notes | x
Using the Examples in This Manual | x
Merging a Full Example | xi
Merging a Snippet | xii
Documentation Conventions | xii
Documentation Feedback | xv
Requesting Technical Support | xv
Self-Help Online Tools and Resources | xvi
Creating a Service Request with JTAC | xvi
1Overview
EX2200SystemOverview | 18
EX2200 Switches Hardware Overview | 18
Benefits of the EX2200 Switch | 19
EX2200 Switches First View | 19
Uplink Ports | 19
Console Port | 20
Cable Guard | 20
Security Slots | 20
Power over Ethernet (PoE) Ports | 20
Front Panel of an EX2200 Switch | 21
Rear Panel of an EX2200 Switch | 23
EX2200 Switch Models | 25
EX2200 Switch Hardware and CLI Terminology Mapping | 25
Chassis Physical Specifications for EX2200 Switches | 28
EX2200Chassis | 29
Chassis Status LEDs in EX2200 Switches | 29
Management Port LEDs in EX2200 Switches | 30
iv
Network Port and Uplink Port LEDs in EX2200 Switches | 32
EX2200CoolingSystem | 34
Airflow Direction in Non-PoE Models of EX2200 Switches, Except for the EX2200-C
Models | 35
Airflow Direction in PoE Models of EX2200 switches, Except for the EX2200-C Models | 36
EX2200PowerSystem | 37
Power Supply in EX2200 Switches | 37
Power Specifications for EX2200 Switches | 38
AC Power Cord Specifications for EX2200 Switches | 39
2SitePlanning,Preparation,andSpecifications
SitePreparationChecklistforEX2200Switches | 42
EX2200SiteGuidelinesandRequirements | 43
Environmental Requirements and Specifications for EX Series Switches | 44
General Site Guidelines | 49
Site Electrical Wiring Guidelines | 49
Rack Requirements | 50
Cabinet Requirements | 51
Clearance Requirements for Airflow and Hardware Maintenance for EX2200 Switches | 52
EX2200NetworkCableandTransceiverPlanning | 55
Pluggable Transceivers Supported on EX2200 Switches | 55
Understanding EX Series Switches Fiber-Optic Cable Signal Loss, Attenuation, and
Dispersion | 56
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable | 56
Attenuation and Dispersion in Fiber-Optic Cable | 57
Calculating the Fiber-Optic Cable Power Budget for EX Series Devices | 57
Calculating the Fiber-Optic Cable Power Margin for EX Series Devices | 58
EX2200ManagementCableSpecificationsandPinouts | 60
Management Cable Specifications | 60
Console Port Connector Pinout Information | 61
Mini-USB Port Pinout Specifications | 62
USB Port Specifications for an EX Series Switch | 62
RJ-45 Management Port Connector Pinout Information | 63
v
RJ-45 Port, SFP Port, SFP+ Port, QSFP+ Port, and QSFP28 Port Connector Pinout
Information | 64
RJ-45 to DB-9 Serial Port Adapter Pinout Information | 69
3InitialInstallationandConfiguration
UnpackingandMountingtheEX2200Switch | 71
Unpacking an EX2200 Switch | 71
Parts Inventory (Packing List) for an EX2200 Switch | 72
Register Products—Mandatory to Validate SLAs | 73
Installing and Connecting an EX2200 Switch | 74
Mounting an EX2200 Switch | 75
Mounting an EX2200 Switch on a Desk or Other Level Surface | 76
Mounting an EX2200 Switch on Two Posts of a Rack or Cabinet | 79
Mounting an EX2200 Switch on Four Posts of a Rack or Cabinet | 81
Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet | 84
Mounting an EX2200 Switch on a Wall | 85
Mounting an EX2200 Switch Except the EX2200-C Model on a Wall | 85
Mounting an EX2200-C Switch on a Wall | 88
Mounting an EX2200 Switch On or Under a Desk Using Screws | 91
Mounting an EX2200 Switch Using the Magnet Mount | 95
ConnectingtheEX2200toPower | 99
Connect Earth Ground to an EX Series Switch | 99
Parts and Tools Required for Connecting an EX Series Switch to Earth Ground | 100
SpecialInstructionstoFollowBeforeConnectingEarthGroundtoanEXSeriesSwitch | 104
Connecting Earth Ground to an EX Series Switch | 105
Connecting AC Power to an EX2200 Switch | 106
Connecting DC Power to an EX2200 Switch | 108
ConnectingtheEX2200toExternalDevices | 112
Connect a Device to a Network for Out-of-Band Management | 112
Connect a Device to a Management Console Using an RJ-45 Connector | 113
ConnectanEXSeriesSwitchtoaManagementConsoleUsingtheMini-USBType-BConsole
Port | 114
vi
ConnectingtheEX2200totheNetwork | 116
Install a Transceiver | 116
Connect a Fiber-Optic Cable | 119
ConfiguringJunosOSontheEX2200 | 120
EX2200 Switch Default Configuration | 120
Connecting and Configuring an EX Series Switch (CLI Procedure) | 125
Connecting and Configuring an EX Series Switch (J-Web Procedure) | 128
DashboardforEXSeriesSwitches | 133
Graphical Chassis Viewer | 134
System Information Panel | 136
Health Status Panel | 139
Capacity Utilization Panel | 143
Alarms Panel | 144
File System Usage | 144
Chassis Viewer | 144
4MaintainingComponents
MaintainTransceivers | 163
Remove a Transceiver | 163
Remove a QSFP28 Transceiver | 166
Install a Transceiver | 168
Install a QSFP28 Transceiver | 170
MaintainFiber-OpticCables | 172
Connect a Fiber-Optic Cable | 172
Disconnect a Fiber-Optic Cable | 173
How to Handle Fiber-Optic Cables | 174
vii
5TroubleshootingHardware
TroubleshootingEX2200Components | 177
Understand Alarm Types and Severity Levels on EX Series Switches | 177
Chassis Component Alarm Conditions on EX2200 Switches | 179
Check Active Alarms with the J-Web Interface | 184
Monitor System Log Messages | 185
TroubleshootingPoEVoltageInjectionFailureinEX2300,EX3400,orEX4300SwitchModels
with PoE Capability | 190
Troubleshoot Temperature Alarms in EX Series Switches | 191
6ContactingCustomerSupportandReturningtheChassisorComponents
ReturninganEX2200SwitchorComponentforRepairorReplacement | 197
Returning an EX2200 Switch or Component for Repair or Replacement | 197
Locating the Serial Number on an EX2200 Switch or Component | 198
Listing the Switch and Components Details with the CLI | 198
Locating the Chassis Serial Number ID Label on an EX2200 Switch | 199
Contact Customer Support to Obtain Return Material Authorization | 199
Packing an EX2200 Switch or Component for Shipping | 200
Packing a Switch for Shipping | 201
Packing Switch Components for Shipping | 202
7SafetyandComplianceInformation
GeneralSafetyGuidelinesandWarnings | 205
DefinitionsofSafetyWarningLevels | 206
QualifiedPersonnelWarning | 209
WarningStatementforNorwayandSweden | 210
FireSafetyRequirements | 210
Fire Suppression | 210
Fire Suppression Equipment | 210
InstallationInstructionsWarning | 212
ChassisandComponentLiftingGuidelines | 212
RestrictedAccessWarning | 214
viii
RampWarning | 216
Rack-MountingandCabinet-MountingWarnings | 217
GroundedEquipmentWarning | 223
LaserandLEDSafetyGuidelinesandWarnings | 224
General Laser Safety Guidelines | 224
Class 1 Laser Product Warning | 225
Class 1 LED Product Warning | 226
Laser Beam Warning | 227
RadiationfromOpenPortAperturesWarning | 228
MaintenanceandOperationalSafetyGuidelinesandWarnings | 229
Battery Handling Warning | 230
Jewelry Removal Warning | 231
Lightning Activity Warning | 233
Operating Temperature Warning | 234
Product Disposal Warning | 236
GeneralElectricalSafetyGuidelinesandWarnings | 237
ActiontoTakeAfteranElectricalAccident | 238
PreventionofElectrostaticDischargeDamage | 239
ACPowerElectricalSafetyGuidelines | 240
ACPowerDisconnectionWarning | 242
DCPowerElectricalSafetyGuidelines | 243
DCPowerDisconnectionWarning | 244
DCPowerGroundingRequirementsandWarning | 246
DCPowerWiringSequenceWarning | 248
DCPowerWiringTerminationsWarning | 251
MultiplePowerSuppliesDisconnectionWarning | 254
ix
TNPowerWarning | 255
AgencyApprovalsforEXSeriesSwitches | 255
ComplianceStatementsforEMCRequirementsforEXSeriesSwitches | 256
Canada | 257
Taiwan | 258
European Community | 258
Israel | 258
Japan | 258
Korea | 259
United States | 259
FCC Part 15 Statement | 259
Nonregulatory Environmental Standards | 260
ComplianceStatementsforAcousticNoiseforEXSeriesSwitches | 261
StatementsofVolatilityforJuniperNetworkDevices | 261
x
AbouttheDocumentation
INTHISSECTION
Documentation Conventions | xii
Documentation Feedback | xv
Requesting Technical Support | xv
Use this guide to install hardware and perform initial software configuration, routine maintenance, and troubleshootingfortheEX2200switch.Aftercompletingtheinstallationandbasicconfigurationprocedures covered in this guide, refer to the Junos OS documentation for information about further software configuration.
DocumentationandReleaseNotes
To obtain the most current version of all Juniper Networks® technical documentation, see the product documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
Iftheinformationinthelatestreleasenotesdiffersfromtheinformationinthedocumentation,followthe product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts. These books go beyond the technical documentation to explore the nuances of network architecture, deployment, and administration. The current list can be viewed at https://www.juniper.net/books.
UsingtheExamplesinThisManual
If you want to use the examples in this manual, you can use the loadmerge or the loadmergerelative command. These commands cause the software to merge the incoming configuration into the current candidateconfiguration.Theexampledoesnotbecomeactiveuntilyoucommitthecandidateconfiguration.
xi
If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example is a fullexample. In this case, use the loadmerge command.
If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In thiscase,usetheloadmergerelative command.Theseproceduresaredescribedinthefollowingsections.
MergingaFullExample
To merge a full example, follow these steps:
1.From the HTML or PDF version of the manual, copy a configuration example into a text file, save the file with a name, and copy the file to a directory on your routing platform.
For example, copy the following configuration to a file and name the file ex-script.conf. Copy the ex-script.conf file to the /var/tmp directory on your routing platform.
system { scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces { fxp0 {
disable; unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2.Merge the contents of the file into your routing platform configuration by issuing the loadmerge configuration mode command:
[edit]
user@host# loadmerge/var/tmp/ex-script.conf load complete
xii
MergingaSnippet
To merge a snippet, follow these steps:
1.From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the file with a name, and copy the file to a directory on your routing platform.
For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the ex-script-snippet.conf file to the /var/tmp directory on your routing platform.
commit {
file ex-script-snippet.xsl; }
2.Movetothehierarchylevelthatisrelevantforthissnippetbyissuingthefollowingconfigurationmode command:
[edit]
user@host# editsystemscripts
[edit system scripts]
3.Merge the contents of the file into your routing platform configuration by issuing the loadmerge relative configuration mode command:
[edit system scripts]
user@host# loadmergerelative/var/tmp/ex-script-snippet.conf load complete
For more information about the load command, see CLI Explorer.
DocumentationConventions
Table 1 on page xiii defines notice icons used in this guide.
xiii
Table1:NoticeIcons |
|
|
Icon |
Meaning |
Description |
|
Informational note |
Indicates important features or instructions. |
|
Caution |
Indicates a situation that might result in loss of data or hardware |
|
|
damage. |
|
Warning |
Alerts you to the risk of personal injury or death. |
|
Laser warning |
Alerts you to the risk of personal injury from a laser. |
|
Tip |
Indicates helpful information. |
|
Best practice |
Alerts you to a recommended use or implementation. |
Table 2 on page xiii defines the text and syntax conventions used in this guide.
Table2:TextandSyntaxConventions
Convention |
Description |
Examples |
Boldtextlikethis |
Represents text that you type. |
To enter configuration mode, type |
|
|
the configure command: |
|
|
user@host> configure |
Fixed-width text like this
Italictextlikethis
Represents output that appears on the terminal screen.
•Introducesoremphasizesimportant new terms.
•Identifies guide names.
•Identifies RFC and Internet draft titles.
user@host> showchassisalarms
No alarms currently active
•A policy term is a named structure that defines match conditions and actions.
•JunosOSCLIUserGuide
•RFC 1997, BGPCommunities Attribute
xiv
Table2:TextandSyntaxConventions (continued)
Convention |
Description |
Italictextlikethis |
Represents variables (options for |
|
which you substitute a value) in |
|
commands or configuration |
|
statements. |
Examples
Configure the machine’s domain name:
[edit]
root@# setsystemdomain-name domain-name
Textlikethis |
Represents names of configuration |
|
statements, commands, files, and |
|
directories; configuration hierarchy |
|
levels; or labels on routing platform |
|
components. |
•To configure a stub area, include the stub statement at the [edit protocolsospfareaarea-id] hierarchy level.
•The console port is labeled
CONSOLE.
< > (angle brackets) |
Encloses optional keywords or |
|
variables. |
| (pipe symbol) |
Indicates a choice between the |
|
mutually exclusive keywords or |
|
variablesoneithersideofthesymbol. |
|
The set of choices is often enclosed |
|
in parentheses for clarity. |
stub<default-metric metric>;
broadcast|multicast
(string1 | string2 | string3)
# (pound sign)
[ ] (square brackets)
Indention and braces ( { } )
; (semicolon)
Indicatesacommentspecifiedonthe |
rsvp{#RequiredfordynamicMPLS |
same line as the configuration |
only |
statement to which it applies. |
|
Enclosesavariableforwhichyoucan |
communitynamemembers[ |
substitute one or more values. |
community-ids ] |
Identifies a level in the configuration |
[edit] |
hierarchy. |
routing-options { |
|
static { |
Identifies a leaf statement at a |
route default { |
configuration hierarchy level. |
nexthop address; |
|
retain; |
|
} |
|
} |
|
} |
GUIConventions
xv
Table2:TextandSyntaxConventions (continued) |
|
|
Convention |
Description |
Examples |
Boldtextlikethis |
Represents graphical user interface |
• IntheLogicalInterfacesbox,select |
|
(GUI) items you click or select. |
AllInterfaces. |
|
|
• To cancel the configuration, click |
|
|
Cancel. |
> (bold right angle bracket) |
Separates levels in a hierarchy of |
Intheconfigurationeditorhierarchy, |
|
menu selections. |
select Protocols>Ospf. |
DocumentationFeedback
We encourage you to provide feedback so that we can improve our documentation. You can use either of the following methods:
•Online feedback system—Click TechLibrary Feedback, on the lower right of any page on the Juniper Networks TechLibrary site, and do one of the following:
•Click the thumbs-up icon if the information on the page was helpful to you.
•Click the thumbs-down icon if the information on the page was not helpful to you or if you have suggestions for improvement, and use the pop-up form to provide feedback.
•E-mail—Sendyourcommentstotechpubs-comments@juniper.net.Includethedocumentortopicname, URL or page number, and software version (if applicable).
RequestingTechnicalSupport
TechnicalproductsupportisavailablethroughtheJuniperNetworksTechnicalAssistanceCenter(JTAC). If you are a customer with an active Juniper Care or Partner Support Services support contract, or are
xvi
covered under warranty, and need post-sales technical support, you can access our tools and resources online or open a case with JTAC.
•JTACpolicies—ForacompleteunderstandingofourJTACproceduresandpolicies,reviewtheJTACUser Guide located at https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
•Productwarranties—Forproductwarrantyinformation,visithttps://www.juniper.net/support/warranty/.
•JTAC hours of operation—The JTAC centers have resources available 24 hours a day, 7 days a week, 365 days a year.
Self-HelpOnlineToolsandResources
Forquickandeasyproblemresolution,JuniperNetworkshasdesignedanonlineself-serviceportalcalled the Customer Support Center (CSC) that provides you with the following features:
•Find CSC offerings: https://www.juniper.net/customers/support/
•Search for known bugs: https://prsearch.juniper.net/
•Find product documentation: https://www.juniper.net/documentation/
•Find solutions and answer questions using our Knowledge Base: https://kb.juniper.net/
•Download the latest versions of software and review release notes: https://www.juniper.net/customers/csc/software/
•Search technical bulletins for relevant hardware and software notifications: https://kb.juniper.net/InfoCenter/
•Join and participate in the Juniper Networks Community Forum: https://www.juniper.net/company/communities/
•Create a service request online: https://myjuniper.juniper.net
To verify service entitlement by product serial number, use our Serial Number Entitlement (SNE) Tool: https://entitlementsearch.juniper.net/entitlementsearch/
CreatingaServiceRequestwithJTAC
You can create a service request with JTAC on the Web or by telephone.
•Visit https://myjuniper.juniper.net.
•Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, see https://support.juniper.net/support/requesting-support/.
1
CHAPTER
EX2200 System Overview | 18
EX2200 Chassis | 29
EX2200 Cooling System | 34
EX2200 Power System | 37
18
EX2200SystemOverview
INTHISSECTION
EX2200 Switch Models | 25
EX2200 Switch Hardware and CLI Terminology Mapping | 25
Chassis Physical Specifications for EX2200 Switches | 28
EX2200SwitchesHardwareOverview
INTHISSECTION
Benefits of the EX2200 Switch | 19
EX2200 Switches First View | 19
Uplink Ports | 19
Console Port | 20
Cable Guard | 20
Security Slots | 20
Power over Ethernet (PoE) Ports | 20
Front Panel of an EX2200 Switch | 21
Rear Panel of an EX2200 Switch | 23
Juniper Networks EX Series Ethernet Switches provide scalable connectivity for the enterprise market, includingbranchoffices,campuslocations,anddatacenters.TheswitchesruntheJuniperNetworksJunos operatingsystem(JunosOS),whichprovidesLayer2andLayer3switching,routing,andsecurityservices. ThesameJunosOScodebasethatrunsonEXSeriesswitchesalsorunsonallJuniperNetworksMSeries, MX Series, and T Series routers and SRX Series Services Gateways.
Juniper Networks EX2200 Ethernet Switches provide connectivity for low-density environments.
19
BenefitsoftheEX2200Switch
Support for Virtual Chassis—EX2200 switches support Virtual Chassis technology. You can interconnect up to four EX2200 switches to form a Virtual Chassis and manage and operate them as a single network entity.
High flexibility—EX2200 switches provide a flexible solution that supports converged data, voice, and videoenvironments.EX2200switchesprovide15.4wattsofClass3PoEtoVoIPtelephones,closed-circuit security cameras, wireless access points, and other IP-enabled devices.
Economical—EX2200 switches offer an economical, entry-level, stand-alone solution for access layer deployments in branch and remote offices, as well as campus networks.
EX2200SwitchesFirstView
EX2200 switches are available in models with 12 , 24, or 48 built-in network ports. The compact, fanless model, EX2200-C switches have 12 network ports.
EX2200 switches provide:
•Up to four uplink ports
•12(compact,fanlessmodel),24,or48built-innetworkportswith10/100/1000BASE-TGigabitEthernet connectors
•Virtual Chassis capability—Starting with Junos OS Release 12.2, you can connect up to four EX2200 switches (including EX2200-C switches) together to form one unit that you manage as a single chassis, calleda VirtualChassis. ForinformationaboutunderstandingandconfiguringVirtualChassis,see Virtual ChassisUserGuideforEX2200,EX3300,EX4200,EX4500andEX4550Switches.
•Power over Ethernet (PoE or PoE+) on all network ports (in PoE-capable models)
UplinkPorts
EachEX2200switchexcepttheEX2200-Cswitchmodelhasfouruplinkportsthatsupport1-gigabitsmall form-factor pluggable (SFP) transceivers for use with fiber connections and copper connections.
EachEX2200-Cswitchhastwodual-purposeuplinkports. EachdualuplinkportconsistsofanRJ-45port (inwhichyoucanconnectacopperEthernetcable)andanSFPport(intowhichyoucanplugatransceiver). Only one of the ports can be active at a time. By default, if you connect a copper Ethernet cable to the RJ-45port,thisportbecomestheactiveportprovidedthatthereisnoconnectionmadeontheotherport. If you plug a transceiver into the SFP port, this port becomes the active port whether or not a copper Ethernetcableisconnectedtotheotherport.Youcanchangethisdefaultbehaviorbyexplicitlyconfiguring a media type—copper or fiber—for the dual-purpose port by using the media-type command. For more information, see ConfiguringtheMediaTypeonDual-PurposeUplinkPorts .
20
You can use an SFP uplink port connection between EX2200 switches to interconnect the switches into an EX2200 Virtual Chassis. For this, you must explicitly configure an SFP port each on the switches to be connectedasaVCP. See SettinganUplinkPortonanEXSeriesorQFXSeriesSwitchasaVirtualChassisPort.
Forinformationaboutthesupportedopticalandcopperinterfaces,see“PluggableTransceiversSupported on EX2200 Switches” on page 55.
ConsolePort
Each EX2200 switch except the EX2200-C switch model has an RJ-45 console port that accepts a cable with RJ-45 connector.
TheEX2200-Cswitchhastwoconsoleports:anRJ-45portandaMini-USBType-Bport.TheRJ-45console port accepts a cable with an RJ-45 connector and the Mini-USB Type-B console port accepts a Mini-B plug(5-pin)connectortoconnecttotheconsolemanagementdevice.Theswitchactivatesonlyoneconsole port at a time, either the RJ-45 console port or the Mini USB type-B console port. By default, the RJ-45 portistheactiveconsoleportandtheMini-USBType-Bportisthepassiveconsoleport. Youcanchange the default setting of a console port by using the port-type command. See ConfiguringtheConsolePort Type(CLIProcedure).
CableGuard
OnanEX2200-Cswitchmodel,youcaninstallacableguardtosecurethecablesconnectedtotheswitch. Thecableguardhasslotsinthefrontofitthroughwhichyoucanpassallthecablestopreventthemfrom being accidently unplugged or removed after they are connected. See “Mounting an EX2200 Switch on a Desk or Other Level Surface” on page 76.
SecuritySlots
EachEX2200-Cswitchmodelhassecurityslotsontheleftandrightpanelsofthechassis.Usethesecurity slots to lock and secure the chassis in the installation site with a standard cable lock . See “Mounting an EX2200 Switch on a Desk or Other Level Surface” on page 76.
PoweroverEthernet(PoE)Ports
EX2200 switches are available in models with or without PoE/PoE+ capability. Models that support PoE/PoE+providethatsupportonallnetworkports.PoEportsprovideelectricalcurrenttodevices—such as IP phones, wireless access points, and security cameras—through network cables, thus eliminating the need for separate power cords for those devices.
EX2200 switches with DC power supply do not provide PoE.
21
NOTE: Starting with Junos OS Release 12.2R1, PoE commands are enabled on all non-PoE-capable EX2200 switch models. The PoE commands do not provide any meaningful information on standalone non-PoE-capable switch models. However, in an EX2200 Virtual Chassis,youcanexecutePoEcommandsfromanon-PoE-capableswitchthatistheprimary,to configure PoE on PoE-capable Virtual Chassis members.
PoE-capable EX2200 switches running Junos OS Release 10.3 or later support powered devices that comply with IEEE 802.3af (PoE) and IEEE 802.3at (PoE+).
NOTE: IEEE 802.3at class 4 powered devices require category 5 or higher Ethernet cables.
EX2200 switches running Junos OS Release 10.2 or earlier support powered devices that comply with IEEE 802.3af (PoE).
The remainder of this topic uses the term PoE to refer to both PoE and PoE+ unless there is a need to distinguish between the two.
FrontPanelofanEX2200Switch
The front panel of an EX2200 switch except the EX2200-C switch models consists of the following components:
•Network ports—depending on the switch model, either of:
•24 or 48 10/100/1000BASE-T Gigabit Ethernet ports, with Power over Ethernet (PoE) not available in EX2200-24T, EX2200-24T-DC, and EX2200-48T models
•24 or 48 10/100/1000BASE-T Gigabit Ethernet ports, with Power over Ethernet (PoE) available in EX2200-24P and EX2200-48P models
•4 built-in SFP uplink ports. You can use these ports to forward network traffic or configure them into Virtual Chassis ports (VCPs) to interconnect EX2200 switches into a Virtual Chassis.
•2 chassis status LEDs
•4 port status mode LEDs
•Factory reset/Mode button
Figure 1 on page 22 shows the front panel of an EX2200 switch with 48 Gigabit Ethernet ports. Figure 2 on page 22 shows the front panel of an EX2200 switch with 24 Gigabit Ethernet ports.
22
Figure1:FrontPanelofanEX2200Switchwith48GigabitEthernetPorts
Figure2:FrontPanelofanEX2200Switchwith24GigabitEthernetPorts
The front panel of an EX2200-C switch consists of the following components:
•Network ports—depending on the switch model, either of:
•12 10/100/1000BASE-T Ethernet ports, (PoE+) in EX2200-C-12P
•12 10/100/1000BASE-T Ethernet ports, (non-PoE) in EX2200-C-12T
•2built-indual-purposeuplinkports,eachofwhichincludesone10/100/1000RJ-45Ethernetportand one SFP port
•1 USB port
•1 Mini-USB console port
•1 RJ-45 console port
•1 Management Ethernet port
•2 chassis status LEDs
•4 port status mode LEDs in PoE+ and 3 port status mode LEDs in non-PoE
•Factory reset/Mode button
23
Figure 3 on page 23 shows the front panel of an EX2200-C switch with 12 Gigabit Ethernet PoE+ ports and Figure4onpage23 showsthefrontpanelofanEX2200-Cswitchwith12GigabitEthernetnon-PoE ports.
Figure3:FrontPanelofanEX2200-CSwitchwith12GigabitEthernetPorts(PoE+)
Figure4:FrontPanelofanEX2200-CSwitchwith12GigabitEthernetPorts(non-PoE)
RearPanelofanEX2200Switch
The rear panel of the EX2200 switch except the EX2200-C switch models consists of the following components:
•Management Ethernet port
•USB port
•Console port
•Protective earthing terminal
•Redundant power system (RPS) port
•ESD point
•Air exhaust
24
•Serial number ID label
•AC power cord inlet or DC power terminals
Figure 5 on page 24 shows the rear panel of an EX2200 switch with an AC power supply.
All EX2200 switches except the EX2200-C switch model have three exhaust openings on the rear panel. The two exhaust openings on the left have fans behind them and are open. The exhaust opening on the right has no fan within it. This opening is exposed on Power over Ethernet (PoE) models and sealed on non-PoEmodels.OnPoEmodels,thisopeningexhauststheairfromthefanattheairintakeforthepower supply on the side panel.
The power cord retainer clips extend out of the chassis by 3 in.
Figure5:RearPanelofanEX2200SwitchwithACPowerSupply
Management |
Protective |
ESD |
Air intake with fan for power supply |
Ethernet port |
earthing terminal |
point |
(fan on PoE models only) |
EX2200-24-4G REV: X1 |
|
750-026464 REV: X3 |
Mfg. Date |
|
20090227 |
MAC: 00:23:9C:oE:19:00 |
|
|
MADE IN CHINA |
<![endif]>g027001
USB |
Console |
RPS |
Air exhaust |
Air exhaust without fan |
Serial number |
AC power |
port |
port |
port |
with fan |
(closed on non-PoE models) |
ID label |
cord inlet |
The rear panel of an EX2200-C switch consists of the following components:
•Protective earthing terminal
•ESD point
•Serial number ID label
•AC power cord inlet
•Heatsink—only in PoE+ models
Figure 6 on page 25 shows the rear panel of an EX2200-C-12P switch with heatsink.
EX2200-Cswitchesbeingfanlessmodelshavenoexhaustopenings. Theswitchhasventsonthetopand on both the sides of the chassis. The PoE+ models have a heatsink installed in the rear panel to dissipate the heat, while non-PoE models have no heatsink.
25
Figure6:RearPanelofanEX2200-C-12PSwitchwithHeatsink
<![if ! IE]><![endif]>g021152
Heatsink
EX2200SwitchModels
The EX2200 switch is available with 12, 24, or 48 built-in network ports with full Power over Ethernet (PoE)capability(all12,24,or48built-innetworkportssupportPoE)ornoPoEcapability.EX2200switches with DC power supply do not provide PoE. Table 3 on page 25 lists the EX2200 switch models.
Table3:EX2200SwitchModels
|
|
|
MaximumSystem |
|
|
|
Ports in Which PoE is |
Power Available |
First Junos OS |
Model |
Access Ports |
Available |
for PoE |
Release |
EX2200-C-12T-2G |
12 Gigabit Ethernet |
– |
– |
11.3R1 |
EX2200-C-12P-2G |
12 Gigabit Ethernet |
All 12 ports |
100 W |
11.3R1 |
EX2200-24T-4G |
24 Gigabit Ethernet |
– |
– |
10.1R1 |
EX2200-24P-4G |
24 Gigabit Ethernet |
All 24 ports |
405 W |
10.1R1 |
EX2200-24T-4G-DC |
24 Gigabit Ethernet |
– |
– |
10.1R1 |
EX2200-48T-4G |
48 Gigabit Ethernet |
– |
– |
10.1R1 |
EX2200-48P-4G |
48 Gigabit Ethernet |
All 48 ports |
405 W |
10.1R1 |
EX2200SwitchHardwareandCLITerminologyMapping
This topic describes the hardware terms used in EX2200 switch documentation and the corresponding terms used in the Junos OS command line interface (CLI). See Table 4 on page 26.
26
Table4:CLIEquivalentsofTermsUsedinDocumentationforEX2200Switches
Hardware |
Description |
|
|
|
Item (as |
(as |
Value (as |
|
|
displayed in |
displayed in |
displayed in |
Item in |
|
the CLI) |
the CLI) |
the CLI) |
Documentation |
Additional Information |
Chassis |
One of the |
– |
Switch |
“ChassisPhysicalSpecificationsforEX2200Switches” |
|
following: |
|
chassis |
on page 28 |
|
• EX2200-C-12T-2G |
|
|
|
|
• EX2200-C-12P-2G |
|
|
|
|
• EX2200-24T-4G |
|
|
|
|
• EX2200-24P-4G |
|
|
|
|
• EX2200-24T-4G-DC |
|
|
|
|
• EX2200-48T-4G |
|
|
|
|
• EX2200-48P-4G |
|
|
|
FPC (n) |
Abbreviated |
Value of n is |
The switch |
UnderstandingInterfaceNamingConventions |
|
name of the |
always 0. |
does not |
|
|
Flexible PIC |
|
have actual |
|
|
Concentrator |
|
FPCs. In this |
|
|
(FPC) |
|
case, FPC |
|
|
One of the |
|
refers to the |
|
|
|
switch itself. |
|
|
|
following: |
|
|
|
|
|
|
|
|
|
• EX2200-C-12T-2G |
|
|
|
|
• EX2200-C-12P-2G |
|
|
|
|
• EX2200-24T-4G |
|
|
|
|
• EX2200-24P-4G |
|
|
|
|
• EX2200-24T-4G-DC |
|
|
|
|
• EX2200-48T-4G |
|
|
|
|
• EX2200-48P-4G |
|
|
|
27
Table4:CLIEquivalentsofTermsUsedinDocumentationforEX2200Switches (continued)
Hardware |
Description |
|
|
|
Item (as |
(as |
Value (as |
|
|
displayed in |
displayed in |
displayed in |
Item in |
|
the CLI) |
the CLI) |
the CLI) |
Documentation |
Additional Information |
PIC (n) |
Abbreviated |
n isavaluein |
The switch |
UnderstandingInterfaceNamingConventions |
|
name of the |
the range of |
does not |
|
|
Physical |
0–1. |
have actual |
|
|
Interface |
|
PIC devices; |
|
|
Card (PIC) |
|
see entries |
|
|
|
|
for PIC 0 |
|
|
|
|
through PIC |
|
|
|
|
1 for the |
|
|
|
|
equivalent |
|
|
|
|
item on the |
|
|
|
|
switch. |
|
One of the |
PIC 0 |
following: |
|
•12x
10/100/1000 BASE-T
•24x
10/100/1000 BASE-T
•48x
10/100/1000 BASE-T
One of the |
PIC 1 |
following: |
|
•2x
(10/100/1000 BASE-T or GE SFP) or
•2x
(100/1000 BASE-X)
•4x GE SFP
Built-in “EX2200SwitchesHardwareOverview”onpage18 network
ports on the frontpanelof the switch
Built-in |
“EX2200SwitchesHardwareOverview”onpage18 |
uplink ports |
|
and |
|
dual-purpose |
|
uplink ports |
|
on the front |
|
panel of the |
|
switch |
|
28
Table4:CLIEquivalentsofTermsUsedinDocumentationforEX2200Switches (continued)
Hardware |
Description |
|
|
|
Item (as |
(as |
Value (as |
|
|
displayed in |
displayed in |
displayed in |
Item in |
|
the CLI) |
the CLI) |
the CLI) |
Documentation |
Additional Information |
Xcvr (n) |
Abbreviated |
n is a value |
Optical |
“Pluggable Transceivers Supported on EX2200 |
|
name of the |
equivalent to |
transceivers |
Switches” on page 55 |
|
transceiver |
the number |
|
|
|
|
of the port in |
|
|
|
|
which the |
|
|
|
|
transceiveris |
|
|
|
|
installed. |
|
|
Powersupply |
Built-in |
Value of n is |
AC power |
“EX2200 Power System” on page 37 |
(n) |
powersupply |
always 0. |
supply |
|
Fan |
Fan |
– |
Fan |
“EX2200 Cooling System” on page 34 |
|
NOTE: EX2200-C |
|
|
|
|
switches are |
|
|
|
|
fanless |
|
|
|
|
models. |
|
|
|
ChassisPhysicalSpecificationsforEX2200Switches
The EX2200 switch chassis is a rigid sheet-metal structure that houses the hardware components. Table 5 on page 28 summarizes the physical specifications of the EX2200 switch chassis.
Table5:PhysicalSpecificationsoftheEX2200SwitchChassis
Description |
EX2200 Value |
EX2200-C Value |
Chassis height |
1.75 in. (4.45 cm) |
|
Chassis width |
• |
17.5 in. (44.5 cm) |
|
• |
19 in. (48.2 cm) with mounting brackets |
|
|
attached |
Chassis depth |
10.5 in. (26.7 cm) |
1.75 in. (4.4 cm)
•10.6 in. (26.92 cm)
•19 in. (48.26 cm) with mounting brackets
•EX2200-C-12T: 9.0 in. (22.8 cm)
•EX2200-C-12P: 9.4 in. (23.8 cm)
29
Table5:PhysicalSpecificationsoftheEX2200SwitchChassis (continued)
Description |
EX2200 Value |
EX2200-C Value |
Weight |
• EX2200-24T: 6 lb (2.7 kg) |
• EX2200-C-12T: 4.6 lb (2.1 kg) |
|
• EX2200-24P: 8 lb (3.6 kg) |
• EX2200-C-12P: 6.4 lb (2.9 kg) |
|
• EX2200-24T-DC: 6 lb (2.7 kg) |
|
|
• EX2200-48T: 8 lb (3.6 kg) |
|
|
• EX2200-48P: 10 lb (4.5 kg) |
|
EX2200Chassis
INTHISSECTION
Management Port LEDs in EX2200 Switches | 30
Network Port and Uplink Port LEDs in EX2200 Switches | 32
ChassisStatusLEDsinEX2200Switches
The front panel of an EX2200 switch has two chassis status LEDs labeled SYS and ALM on the far right side of the panel. See Figure 7 on page 29 and Figure 8 on page 30.
Figure7:ChassisStatusLEDsinanEX2200SwitchExcepttheEX2200-CSwitch
Chassis status LEDs
SYS |
ALM |
0 1 2 3
SPD
DX
EN POE
<![endif]>g027003
30
Figure8:ChassisStatusLEDsinanEX2200-CSwitch
Chassis status LEDs
<![if ! IE]><![endif]>g021153
Table 6 on page 30 describes the chassis status LEDs in an EX2200 switch, their colors and states, and the status they indicate.
Table6:ChassisStatusLEDsinanEX2200Switch
LED Label |
Color |
State and Description |
SYS |
Green |
• On steadily—The switch is functioning normally. |
|
|
• Blinking—The switch is booting. |
|
|
• Off—The switch is powered off or is halted. |
ALM |
Unlit |
There is no alarm or the switch is halted. |
|
Amber |
There is a minor alarm. |
|
Red |
There is a major alarm. |
A major alarm (red) indicates a critical error condition that requires immediate action.
A minor alarm (amber) indicates a noncritical condition that requires monitoring or maintenance. A minor alarm that is left unchecked might cause interruption in service or performance degradation.
Both LEDs can be lit simultaneously.
You can view the colors of the two LEDs remotely through the CLI by issuing the operational mode command showchassisled.
ManagementPortLEDsinEX2200Switches
The management port on an EX2200 switch has two LEDs that indicate link/activity and port status. The EX2200 switches except the EX2200-C switch models have the management port on the rear panel and the EX2200-C switch has the management port on the front panel. See Figure 9 on page 31 and Figure 10 on page 31.